Detection of Gunshot Primer Residue on Bone in an Experimental Setting—An Unexpected Finding*

Abstract: Pork ribs with intact muscle tissue were used in an experimental attempt to identify bullet wipe on bone at distances from 1 to 6 feet with 0.45 caliber, full metal jacket ammunition. This resulted in the unexpected finding of primer‐derived gunshot residue (GSR) deep within the wound tract. Of significance is the fact that the GSR was deposited on the bone, under the periosteum, after the bullet passed through a Ziploc^® bag and c. 1 inch of muscle tissue. It is also important to note that the GSR persisted on the bone after the periosteum was forcibly removed. The presence of primer‐derived GSR on bone provides the potential to differentiate gunshot trauma from blunt trauma when the bone presents an atypical gunshot wound. In this study, the presence of gunshot primer residue at a distance of 6 feet demonstrates the potential for establishing maximum gun‐to‐target distance for remote shootings.     

Comparison of GSR Composition Occurring at Different Locations Around the Firing Position

Abstract: Variations in gunshot residue (GSR) compositions are used in the reconstruction of shooting incidents. In this study, GSR samples taken from seven different locations around and in the firearm were collected and analyzed using scanning electron microscopy/energy dispersive X‐ray analysis. Four different types of ammunition were applied. Very low correlations were found when different ammunition were used. This clearly shows that it is possible to differentiate between ammunition types. When the same ammunition was used, high correlations were found between samples taken from external positions (such as hands of shooter, bullet‐entrance holes) but poor correlation was found between internal samples (such as firearm barrel, cartridge case) and external samples. A high degree of association was found between samples that simulated victim and shooter. These findings clearly demonstrate that GSR comparison studies are meaningful but care needs to be taken when choosing suitable exhibits. External samples (such as hands of shooter, bullet‐entrance holes) are more suitable candidates than internal samples (barrel of the firearm, cartridge case).     

Detection of Gunshot Residue on Dark‐Colored Clothing Prior to Chemical Analysis

Detection of gunshot residue (GSR) is an arduous task for investigators. It is often accomplished with chemical tests, which can reveal elements and ions indicating the presence of GSR, but are likely to cause physical alteration to the pattern. In this study, the Spex Forensics Mini‐CrimeScope MCS 400, along with 16 accompanying wavelength filters, was applied to various GSR patterns and target types. Three dark shirt materials, four ammunition calibers, and eight ammunition manufacturers, along with the primer residue of the different manufacturer ammunitions were tested. Results indicate the alternate light source wavelength of 445 nm to be the optimal setting. In addition, target material plays a large role in the preservation of GSR patterns as particles burn. Furthermore, it can be extrapolated that residue, observed from a full round and firing distance of six inches, is mostly composed of unburnt gunpowder residue, not primer residue.     

Self‐inflicted Firearm Discharge from Heating Using a Gas Burner

A male in his 70s was found lying dead in the living room of his house. A gunshot entrance wound was observed in the left orbit, with a lead slug and wadding left in the skull, which exhibited fatal cranio‐cerebral trauma. A cartridge had been discharged from a handmade launcher, or zip gun, that had been fixed to a spare gun barrel on a pipe chair, by heating the launcher from the side using a gas burner. The deceased had owned guns for hunting in the past and had returned the license, but he had retained a spare barrel and live cartridges at home. In this unique case of suicide, a zip gun was discharged by heating with a gas burner.     

A Study of the Presence of Gunshot Residue in Pittsburgh Police Stations using SEM/EDS and LC‐MS/MS

Due to possible secondary transfer of gunshot residue (GSR) onto a suspect in police custody prior to sampling, a baseline must be created for the amount of GSR present. With an increase of “lead free” ammunition, testing for both gunpowder and primer GSR is relevant. Seventy samples were collected using carbon‐coated adhesive stubs from four Pittsburgh Police Stations and vehicles to investigate these locations as sources of secondary GSR contamination. These seventy samples were analyzed for primer GSR using scanning electron microscopy‐energy‐dispersive X‐ray spectrometry. One primer GSR particle was detected; no sample was classified as positive for primer GSR. These same samples were then analyzed for gunpowder GSR using liquid chromatography coupled to tandem mass spectrometry to test for akardite II, ethylcentralite, diphenylamine, N‐nitrosodiphenylamine, 2‐nitrodiphenylamine, and 4‐nitrodiphenylamine. Ethylcentralite was quantifiable in two test samples. These results suggest there is a negligible potential for secondary transfer of primer and gunpowder GSR.     

Preparation of a Ytterbium‐tagged Gunshot Residue Standard for Quality Control in the Forensic Analysis of GSR

Preparation of a ytterbium‐tagged gunshot residue (GSR) reference standard for scanning electron microscopy and energy dispersive X‐ray spectroscopic (SEM‐EDS) microanalysis is reported. Two different chemical markers, ytterbium and neodymium, were evaluated by spiking the primers of 38 Special ammunition cartridges (no propellant, no projectile) and discharging them onto 12.7 mm diameter aluminum SEM pin stubs. Following SEM‐EDS microanalysis, the majority of tri‐component particles containing lead, barium, and antimony (PbBaSb) were successfully tagged with the chemical marker. Results demonstrate a primer spiked with 0.75% weight percent of ytterbium nitrate affords PbBaSb particles characteristic of GSR with a ytterbium inclusion efficiency of between 77% and 100%. Reproducibility of the method was verified, and durability of the ytterbium‐tagged tri‐component particles under repeated SEM‐EDS analysis was also tested. The ytterbium‐tagged PbBaSb particles impart synthetic traceability to a GSR reference standard and are suitable for analysis alongside case work samples, as a positive control for quality assurance purposes.     

Fate and Behavior of Gunshot Residue—A Review

A review of the literature concerning the fate and behavior of gunshot residue (GSR) is presented. A number of concomitant parameters including firearm and ammunition type, plume and GSR material characteristics, travel distances, chemical composition and GSR morphology are critically discussed in relation to their effects on the distribution and deposition, transfer and persistence processes of GSR. The underlying mechanisms associated with such processes are also considered. Knowledge of these processes on GSR materials could provide valuable information concerning scene preservation and subsequent forensic sampling. The number of GSR particles deposited can vary significantly with each firearm discharge, highlighting the potential to produce distinctive data in each individual case. With the continual development and compositional changes of new ammunition types, further evaluation of the effect these processes may have on GSR evidence and their possible influence on the interpretation of the analytical results should be given due consideration.     

Implementation and Optimization of the Sodium‐Rhodizonate Method for Chemographic Shooting Distance Estimation

In shooting incident investigations where it is important to estimate the shooting distance, the sodium‐rhodizonate coloring method has been used for the visualization of GSR patterns extensively. This publication describes the optimization of this method by the use of a heated press for the transfer of GSR traces on garments, as well as variation of a number of other important process parameters. Our final aim for this project was to prepare a formal validation of the coloring method as prerequisite for its inclusion into the scope of ISO17025‐certified methods in the GSR Laboratory. A number of important factors and process parameters were identified, such as buffer composition and pH, type of textile used as a substrate and resolution of the documentation of the results. Results were tested using a synthetic proficiency test. Our optimized method has been found to be a very effective technique for visualization of macroscopic GSR traces.     

根据创口射击残留物推断“5.4”式手枪射击距离的研究

目的利用环境控制扫描电镜/能谱仪（SEM/EDX）研究枪弹创射入口周围射击残留物与射击距离的关系,探讨其能否用于射击距离的判断。方法采用＂＂5.4＂＂式手枪分别在5、10、15、20、30、40、50、60、70、80、90、120cm处射击乳猪皮肤,利用SEM/EDX观察创口周围GSR的分布和成分,并建立回归方程。结果射击距离和GSR颗粒数量之间总体表现为直线关系,并建立了相应的回归方程。当射击距离为10~90cm时,用该方程推断射击距离效果较好。结论检测创口周围GSR可望用于判断“5.4”式手枪的射击距离。     

Image analysis of gunshot residue on entry wounds: II – A statistical estimation of firing range

A statistical investigation of the relationship between firing range and the amount and distribution of gunshot residue (GSR), used automated image analysis (IA) to quantify GSR deposit resulting from firings into pig skin, from distances ranging between contact and 45 cm. Overall, for a Ruger .22 semi-automatic rifle using CCI solid point, high velocity ammunition, the total area of GSR deposit on the skin sections decreased in a non-linear fashion with firing range. More specifically there were significant differences in the amount of GSR deposited from shots fired at contact compared with shots fired from distances between 2.5 and 45 cm; and between shots fired from a distance of 20 cm or less, with shots fired at a distance of 30 cm or more. In addition, GSR particles were heavily concentrated in the wound tract only for contact and close range shots at 2.5 cm, while the particle distribution was more uniform between the wound tract and the skin surfaces for shots fired from distances greater than 2.5 cm. Consequently, for future scientific investigations of gunshot fatalities, once standards have been established for the weapon and ammunition type in question, image analysis quantification of GSR deposited in and around the gunshot wound may be capable of providing a reliable, statistical basis for estimating firing range.     

In the Line of Fire—21st-Century Approach to an Ancient War Injury

Abstract:  Authentic black-powder muzzle-loader weapons or replicas are used today primarily for re-enactments of historic battles. A lay actor playing the role of a Prussian infantryman sustained life-threatening gunshot injuries during a recent re-enactment of a historic battle of the Sixth Coalition. As only blank historic muzzle-loading weaponry was used, the origin of the missile causing the wounding was initially unclear. Further investigation revealed a ramrod that had been propelled out of the barrel of another gunner's smooth-bore gun as cause of injury. The ramrod was hurled on a trajectory of more than 20 m, breaking the victim's shouldered barrel and hitting the victim resulting in severe abdominal, thoracic, and upper limb injuries. The critical incidents while handling muzzle-loading weaponry leading to premature discharge are elucidated. Furthermore, this report demonstrates how actual diagnostics and subsequent surgical treatment enabled this infantryman to survive an injury to which his comrades-in-arms would have succumbed 200 years ago.     

Statistical Challenges in the Quantification of Gunshot Residue Evidence

The discharging of a gun results in the formation of extremely small particles known as gunshot residues (GSR). These may be deposited on the skin and clothing of the shooter, on other persons present, and on nearby items or surfaces. Several factors and their complex interactions affect the number of detectable GSR particles, which can deeply influence the conclusions drawn from likelihood ratios or posterior probabilities for prosecution hypotheses of interest. We present Bayesian network models for casework examples and demonstrate that probabilistic quantification of GSR evidence can be very sensitive to the assumptions concerning the model structure, prior probabilities, and the likelihood components. This finding has considerable implications for the use of statistical quantification of GSR evidence in the legal process.     

Ballistic characterization of the Remington Premier Copper Solid sabot shotgun slug

We evaluated the impact and penetration characteristics of the Remington Copper Solid sabot shotgun slug with standardized ballistic tests and used this information to predict tissue wounding patterns. This unique ammunition, first distributed in 1993, is composed of a solid copper, hollow-point slug with longitudinal slots cut into the nose. The slug is fitted into a hard plastic sabot with 8 finger-like projections and loaded into a shotgun shell with two plastic wads separating it from the underlying gunpowder charge. The ammunition was fired through a 12-gage shotgun using a rifled barrel, a smooth-bore barrel with rifled choke, and a smooth-bore barrel with a smooth modified choke into targets consisting of poster board and 10% ballistic gelatin at a variety of distances. The copper slug and plastic sabot created single 8-fingered asterisk-shaped defects in the poster board when fired at distances of less than 7 to 9 ft (approximately 2 to 3 m). All three barrel types performed similarly. At greater distances, the sabot impacted the targets separately from the slugs and created variably shaped defects that reflected base-first, nose-first, and side-first impacts. Increasing muzzle-to-target distances generally increased the impact distances between the slug and sabot. There was no predictable relationship between the sabot and slug impact points for any of the three barrel types. With each barrel tested, the wads created separate defects from the slug at distances greater than 5 ft (1.5 m). The distances between the slug and the wad impact points increased with increasing muzzle-to-target distances up to 40 ft (12 m), after which the wads generally no longer struck the targets. The slug created atypical defects at distances between 7 and 150 ft (approximately 2 to 45 m), probably due to yawing or tumbling. When the slug impacted the gelatin block in a nose-first orientation, the slotted nose portion tended to fragment and radially deposit pieces in the gelatin that were visible on radiographs. When the slug struck the gelatin target in a side-first orientation, it passed through the gelatin intact. The slug, sabot, and wads of this unique projectile separate and create independent impact points in a stereotypical manner independent of barrel type. This pattern of separation allows estimates to be made of ranges of fire. Wounds created in human tissues by this ammunition would likely have similar asterisk-shaped configurations, and nose fragments may be deposited in tissues and seen radiographically. Rectangular wounds created by the tumbling or yawing slug might be mistaken for intermediate target wounds.     

Characteristics of gunshot wounds caused by the special forces shooting knife (NRS and NRS-2)

Gunshot wounds of skin and long cortical bones inflicted by the special intelligence knife (NRS and NRS-2: special silent cartridges SP-3 and SP-4) from different distances were examined. Stereomicroscopy, emission spectral analysis, contact-diffusion method and regression- step-by-step analysis were made use of within the case study. A lack of mechanical, thermal or chemical impact from firing gas and of fire soot as well as presence of particles of rubber, copper and sealing varnish, i.e. the most informative shot products, were found to be the main distinctive features in the said wounds. The data obtained can be used in the differential diagnosis of a type and model of the used gun.     

Suicide with a walking cane gun: weapon, injury picture and psychopathology]

In Germany firearms camouflaged as items of daily use are forbidden. While reports on ball-point pen-guns have repeatedly been published in literature, the use of a walking-stick gun is a rarity. The report deals with the suicide of a 31-year-old schizophrenic man who inflicted a shotgun injury to his head with typical morphological characteristics. The weapon used was a normal-looking walking stick with a barrel, cal. .410. Under forensic and criminological aspects the significance of a walking-stick gun is comparable to that of ball-point pen-guns. Both weapons can be carried and used inconspicuously, but from a walking-stick gun also ammunition of larger calibres with a higher potential of injury can be fired.     

Image analysis of gunshot residue on entry wounds. II--A statistical estimation of firing range.

A statistical investigation of the relationship between firing range and the amount and distribution of gunshot residue (GSR), used automated image analysis (IA) to quantify GSR deposit resulting from firings into pig skin, from distances ranging between contact and 45 cm. Overall, for a Ruger .22 semi-automatic rifle using CCI solid point, high velocity ammunition, the total area of GSR deposit on the skin sections decreased in a non-linear fashion with firing range. More specifically there were significant differences in the amount of GSR deposited from shots fired at contact compared with shots fired from distances between 2.5 and 45 cm; and between shots fired from a distance of 20 cm or less, with shots fired at a distance of 30 cm or more. In addition, GSR particles were heavily concentrated in the wound tract only for contact and close range shots at 2.5 cm, while the particle distribution was more uniform between the wound tract and the skin surfaces for shots fired from distances greater than 2.5 cm. Consequently, for future scientific investigations of gunshot fatalities, once standards have been established for the weapon and ammunition type in question, image analysis quantification of GSR deposited in and around the gunshot wound may be capable of providing a reliable, statistical basis for estimating firing range.     

Detecting Gunshot Residue from Sellier & Bellot Nontox Heavy Metal‐free Primer by in situ Cathodoluminescence

Gunshot residue (GSR) from the discharge of ammunition can provide crucial information in reconstructing criminal cases. Traditional primers create particles of heavy metals such as lead, barium, and antimony. In forensic laboratories, automatic inorganic particle detection is performed by scanning electron microscopy (SEM), using the backscattered electron signal to search for bright residues among the many darker environmental particles, due to higher electron density of the former. Some innovative primers, indicated as heavy metal‐free (HMF), produce a residue of elements with atomic numbers below 21, urgently demanding new detecting solutions. For the first time, residues from Sellier & Bellot Nontox HMF primer are demonstrated to emit visible light under electron beam stimulation in a SEM. Cathodoluminescence is then proposed as a promising tool to both detect and characterize residues in forensic cases involving HMF primers, with minor changes to traditional analytical apparatus used for inorganic GSR analysis.     

Analysis of Gunshot Residue and Associated Materials—A Review

Abstract: A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a “case by case” approach is argued to be more preferable to a “formal” classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, whereever practicable.     

Quantity of weapon oils at the target as a function of shooting sequence and firing distance

Five widely used gun oils were tested to see if they could be identified by gas chromatography. All oils in the test produced characteristic gas chromatograms and the test was highly sensitive in tracing the oils. Seven different weapons and various types of ammunition were used to perform firing tests involving an oil sold under the brand name of "Gun pro." The weapons were oiled and wiped dry and subsequently discharged at a cotton cloth target. Series of shots were fired from a maximal distance of 3 m, and the weapon was not cleaned between shots. Grease marks and powder-burn traces were extracted separately and the extracts, after adding an internal standard, were investigated by means of gas chromatography (gas chromatography unit by Perkin and Elmer). The largest quantities of oil were transmitted by indoor ammunition fired from a small-bore rifle. At a firing range of 20 cm, a decrease in the oil quantity could be observed up to the fourth discharge. When the firing range was varied there was a decrease in the oil quantity up to a distance of 80 cm. The first and the second discharge could be distinguished up to a firing range of 60 cm. With increasing force of the projectile and a decrease in the interior length of the gun barrel, the quantity of oil conveyed to the target also decreased. Additionally, the identifiability of the oil was investigated after firing at several layers of cloth and after storage of the samples (no losses occurred after a 1-month storage period).(ABSTRACT TRUNCATED AT 250 WORDS)