Forensic analysis of ignitable liquids in fire debris by comprehensive two-dimensional gas chromatography

The application of comprehensive two-dimensional gas chromatography (GC x GC) for the forensic analysis of ignitable liquids in fire debris is reported. GC x GC is a high resolution, multidimensional gas chromatographic method in which each component of a complex mixture is subjected to two independent chromatographic separations. The high resolving power of GC x GC can separate hundreds of chemical components from a complex fire debris extract. The GC x GC chromatogram is a multicolor plot of two-dimensional retention time and detector signal intensity that is well suited for rapid identification and fingerprinting of ignitable liquids. GC x GC chromatograms were used to identify and classify ignitable liquids, detect minor differences between similar ignitable liquids, track the chemical changes associated with weathering, characterize the chemical composition of fire debris pyrolysates, and detect weathered ignitable liquids against a background of fire debris pyrolysates.     

Hierarchical Cluster Analysis of Ignitable Liquids Based on the Total Ion Spectrum

Gas chromatography–mass spectrometry (GC–MS) data of ignitable liquids in the Ignitable Liquids Reference Collection (ILRC) database were processed to obtain 445 total ion spectra (TIS), that is, average mass spectra across the chromatographic profile. Hierarchical cluster analysis, an unsupervised learning technique, was applied to find features useful for classification of ignitable liquids. A combination of the correlation distance and average linkage was utilized for grouping ignitable liquids with similar chemical composition. This study evaluated whether hierarchical cluster analysis of the TIS would cluster together ignitable liquids of the same ASTM class assignment, as designated in the ILRC database. The ignitable liquids clustered based on their chemical composition, and the ignitable liquids within each cluster were predominantly from one ASTM E1618‐11 class. These results reinforce use of the TIS as a tool to aid in forensic fire debris analysis.     

The effect of microbial degradation on the chromatographic profiles of tiki torch fuel, lamp oil, and turpentine

Biodegradation can result in selective removal of many of the compounds required for the identification of an ignitable liquid. In this study, the effects of microbial degradation on tiki torch fuel, lamp oil, and turpentine are reported. Samples of soil spiked with 20 μL of the liquids were stored at room temperature for up to 7 days. The ignitable liquids were then recovered using passive headspace concentration onto charcoal strips followed by solvent elution using pentane. Microbial degradation of tiki torch fuel resulted in the loss of the n-alkanes relative to the branched alkanes. Changes in the profile of the lamp oil were minor due to the highly branched nature of its alkanes. Microbial degradation of turpentine resulted in the selective loss of limonene and o-cymene. Overall, significant degradation by microbial action could result in the inability to identify the presence of an ignitable liquid or misclassify the ignitable liquid found.     

Aromatic content in medium range distillate products--Part I: an examination of various liquids

Classification of ignitable liquids in accordance with voluntary consensus-based standards published by ASTM International has become increasingly specific, relying upon both the chemical composition and the boiling point range of submitted ignitable liquids. This classification system includes among others, specific classes for distillates and dearomatized distillates. In this study, a variety of medium-range ignitable liquids were analyzed by gas chromatography-mass spectrometry. Several methods of data analysis were utilized to examine the relative aliphatic and aromatic contents in these liquids. Results show that commercially available products in the medium range exhibit a broad range of compositions with respect to the relative proportion of aliphatic and aromatic compounds and that some liquids may not be easily classified. This study demonstrates the importance of examining the proportion of aliphatics:aromatics for classifying such liquids and suggests guidelines for differentiating medium range distillates, dearomatized distillates, and blended products.     

Absorption of ignitable liquids into polyethylene/polyvinylidine dichloride bags

Clear plastic bags are often used for the collection, sampling and storage of ignitable liquid evidence. They are popular because they are easy to store. transport and are inexpensive. Cryovac and Globus brand polyethylene/polyvinylidine dichloride bags were tested for suitability in storing ignitable liquid evidence. Standards of diesel, kerosene and gasoline were placed in the bags and sampled by passive headspace adsorption. The bags were then heated to determine if absorbed components of the standards could be released upon heating. Recovered extracts were analyzed by GC and GCMS. These bags were found to absorb components of diesel, kerosene, and gasoline. and were also found to produce interfering by-products that obstruct the chromatographic results. Evidence containers need to be tested to ensure that low levels of ignitable liquids are not missed.     

A study of the effects of a Micelle Encapsulator Fire Suppression Agent on dynamic headspace analysis of fire debris samples

The effects of a Micelle Encapsulator Fire Suppression Agent (F-500, Hazard Control Technologies Inc., Fayetteville, Georgia) on the routine analysis of fire debris samples by Gas Chromatography (GC) were studied. When mixed with water the product can be used in the suppression of Class A and Class B fires. Laboratory tests were performed to determine whether or not the product has any effect on the analysis for ignitable liquids by GC, in particular for gasoline, medium petroleum distillates. and heavy petroleum distillates. Test burns were suppressed using either the micelle encapsulator or water and samples collected from these burns were analyzed. The results of analysis show that use of the micelle encapsulator at a fire scene may affect the chromatographic data obtained from samples collected by the investigator. However, the effect does not prevent the identification of common ignitable liquids in fire debris samples.     

Association of Ignitable Liquid Residues to Neat Ignitable Liquids in the Presence of Matrix Interferences Using Chemometric Procedures*,†

Abstract: In fire debris analysis, weathering of ignitable liquids and matrix interferences can make the identification of ignitable liquid residues (ILRs) difficult. An objective method was developed to associate ILRs with the corresponding neat liquid with discrimination from matrix interferences using principal components analysis (PCA) and Pearson product moment correlation (PPMC) coefficients. Six ignitable liquids (gasoline, diesel, ultra pure paraffin lamp oil, adhesive remover, torch fuel, paint thinner) were spiked onto carpet, which was burned, then extracted using passive headspace extraction, and analyzed by gas chromatography‐mass spectrometry. Both light and heavy burn conditions were investigated. In the PCA scores plot, ignitable liquids were discriminated based on alkane and aromatic content. All ILRs were successfully associated with the corresponding neat liquid using both PCA and PPMC coefficients, regardless of the extent of burning. The method developed in this research may make the association of ILRs with corresponding neat liquids more objective.     

Combined target factor analysis and Bayesian soft-classification of interference-contaminated samples: Forensic Fire Debris Analysis

A Bayesian soft classification method combined with target factor analysis (TFA) is described and tested for the analysis of fire debris data. The method relies on analysis of the average mass spectrum across the chromatographic profile (i.e., the total ion spectrum, TIS) from multiple samples taken from a single fire scene. A library of TIS from reference ignitable liquids with assigned ASTM classification is used as the target factors in TFA. The class-conditional distributions of correlations between the target and predicted factors for each ASTM class are represented by kernel functions and analyzed by Bayesian decision theory. The soft classification approach assists in assessing the probability that ignitable liquid residue from a specific ASTM E1618 class, is present in a set of samples from a single fire scene, even in the presence of unspecified background contributions from pyrolysis products. The method is demonstrated with sample data sets and then tested on laboratory-scale burn data and large-scale field test burns. The overall performance achieved in laboratory and field test of the method is approximately 80% correct classification of fire debris samples.     

The identification of Isopar H in vinyl flooring

Vinyl flooring manufacturers use plasticizers to decrease the viscosity and increase the pliability of vinyl. Several ignitable liquid plasticizers used in the manufacture of vinyl flooring were identified and investigated in this study. Twenty-nine collections from five major vinyl manufacturers, a total of 72 samples, were analyzed using passive headspace concentration in accordance with the American Society for Testing and Materials (ASTM E 1412-00) and gas chromatographic-mass spectrometric (GC-MS) analysis as described in ASTM E 1618-01 (1,2). Norpar products and TXIB (2,2,4-trimethyl-1,3-pentanediol diisobutyrate) are ignitable liquids common to the manufacture of vinyl flooring and were identified in all recently obtained samples. Isopar H is an ignitable liquid found in various products such as charcoal starters, copier toners, and some solvents (2). Of the 29 collections analyzed, Isopar H was only identified in Armstrong's Interflex-Traditions pattern.     

Chemical fingerprinting of petrochemicals for arson investigations using two-dimensional gas chromatography - flame ionisation detection and multivariate analysis

Two-dimensional gas chromatography is a mature, yet underutilised, separation technique able to provide the high resolution and peak capacity required for the study of complex samples such as oils. This paper presents the development of a comprehensive two-dimensional gas chromatography method with flame ionisation detection to profile easily available ignitable liquids commonly found in arson cases. The use of 2D chromatograms to profile different potential ignitable liquids was also explored for classification purposes. The chemical fingerprints produced were visually different and allowed the distinction of all the petroleum products tested. How the chemical fingerprints of each fuel changed over time was also assessed. Each sample was subjected to weathering with aliquots (1 mL) being collected every half hour for a five-hour period. Principal component analysis of the resulting data was able to demonstrate the effect of weathering for all fuels tested and established that it was still possible to differentiate between the various petrochemicals even after weathering. The work demonstrates an optimised analytical method for petrochemical product analysis that provides forensic scientists with a robust, fast and sensitive technique that can be used to determine not only which ignitable liquid was used in a fire (even after the fact) but also provide information on the specific fuel used.     

Chemical fingerprinting of unevaporated automotive gasoline samples

The comparison of two or more samples of liquid gasoline (petrol) to establish a common origin is a difficult problem in the forensic investigation of arsons and suspicious fires. A total of 35 randomly collected samples of unevaporated gasoline, covering three different grades (regular unleaded, premium unleaded and lead replacement), were examined. The high-boiling fraction of the gasoline was targeted with a view to apply the techniques described herein to evaporated gasoline samples in the future.A novel micro solid phase extraction (SPE) technique using activated alumina was developed to isolate the polar compounds and the polycyclic aromatic hydrocarbons (PAHs) from a 200microl sample of gasoline. Samples were analysed using full-scan gas chromatography-mass spectrometry (GC-MS) and potential target compounds identified. Samples were then re-analysed directly, without prior treatment, using GC-MS in selected ion monitoring (SIM) mode for target compounds that exhibited variation between gasoline samples. Principal component analysis (PCA) was applied to the chromatographic data. The first two principal components (PCs) accounted for 91.5% of the variation in the data. Linear discriminant analysis (LDA) performed on the PCA results showed that the 35 samples tested could be classified into 32 different groups.     

Progress Toward the Determination of Correct Classification Rates in Fire Debris Analysis,,

Principal components analysis (PCA), linear discriminant analysis (LDA), and quadratic discriminant analysis (QDA) were used to develop a multistep classification procedure for determining the presence of ignitable liquid residue in fire debris and assigning any ignitable liquid residue present into the classes defined under the American Society for Testing and Materials (ASTM) E 1618‐10 standard method. A multistep classification procedure was tested by cross‐validation based on model data sets comprised of the time‐averaged mass spectra (also referred to as total ion spectra) of commercial ignitable liquids and pyrolysis products from common building materials and household furnishings (referred to simply as substrates). Fire debris samples from laboratory‐scale and field test burns were also used to test the model. The optimal model's true‐positive rate was 81.3% for cross‐validation samples and 70.9% for fire debris samples. The false‐positive rate was 9.9% for cross‐validation samples and 8.9% for fire debris samples.     

Comparison of the effectiveness of Tenax TA and Carbotrap 300 in concentration of flammable liquids compounds

The aim of research was to compare two adsorbents, Tenax TA and Carbotrap 300, to evaluate their usefulness as passive adsorbents of flammable liquids compounds. It was also to determine whether Carbotrap 300 could be used in a passive adsorption mode, contrary to manufacturer recommendations. To compare the adsorption properties and the thermal desorption efficiency for Tenax TA and Carbotrap, the components of test mixture were adsorbed and then chromatographically analyzed. The analysis was conducted by means of an automated thermal desorber coupled with a gas chromatograph and a mass spectrometer. This research established that although these adsorbents significantly differ from each other in adsorption properties, each of them can be successfully used for passive adsorption of ignitable liquids compounds. Tenax TA turned out to be more effective for the adsorption of nonpolar, high-boiling compounds, whereas Carbotrap is more effective for polar and volatile compounds. The examined adsorbents differ in their susceptibility to thermal desorption. For Carbotrap 300, after the analysis an additional treatment is required to remove the remnants of adsorbed compounds. With Tenax TA, this additional step is not necessary because the thermal desorption is sufficiently effective that this product is immediately ready for re-use.     

Pyrolysis Products of Linear Alkylbenzenes— Implications in Fire Debris Analysis*

Abstract: In this case report, potential interferences from an improvised fire‐extinguishing agent, a dishwashing liquid, containing linear alkylbenzene sulfonates (LAS), was studied. The presence of linear alkylbenzenes (LABs) in the fire debris sample was identified from the summed ion profile (SIP) analysis. It was found that the LAS from dishwashing liquids produce LABs by thermal degradation. Direct pyrolysis of a LAS‐containing dishwashing liquid at 300°C yielded a distribution of LABs in the SIP. LABs began to break down at pyrolysis temperatures between 450 and 500°C and completely break down by 800°C. Observed pyrolysis breakdown products of LABs included toluene, ethylbenzene, meta‐, para‐, and ortho‐xylenes, propylbenzene, indane, naphthalene, and 1‐ and 2‐methylnaphthalenes. These data suggested the presence of LABs in fire debris evidence might complicate subsequent analysis because their breakdown products contained some of the target compounds common to ignitable liquid identification. Therefore, a positive determination of the presence of foreign ignitable liquids should be carefully evaluated when there is a presence of LABs in the SIP.     

Effect of evaporation and matrix interferences on the association of simulated ignitable liquid residues to the corresponding liquid standard

Identification of an ignitable liquid in fire debris evidence can be complicated due to evaporation of the liquid, matrix interferences, and thermal degradation of both the liquid and the matrix. In this research, liquids extracted from simulated fire debris were compared to the original liquid using multivariate statistical procedures. Neat and evaporated gasoline and kerosene standards were spiked onto nylon carpet, which was subsequently burned. The ignitable liquid residues were extracted using a passive headspace procedure and analyzed by gas chromatography-mass spectrometry. Pearson product moment correlation coefficients, hierarchical cluster analysis, and principal components analysis were used to compare the liquids extracted from the carpet to the corresponding neat liquid. For each procedure, association of the extracts according to liquid type was possible, albeit not necessarily to the specific evaporation level. Of the three procedures investigated, principal components analysis offered the most promise since contributions from matrix interferences were essentially eliminated.     

A Comprehensive Study of the Alteration of Ignitable Liquids by Weathering and Microbial Degradation,

The differing effects of weathering and microbial degradation are described here in a comprehensive study that involved 50 different ignitable liquids from the Ignitable Liquids Database and Reference Collection. Examples of ignitable liquid residues from each of the main classes established by the American Society of Testing and Materials are presented. Weathering was accomplished via evaporation, whereas microbial degradation was carried out on soil at room temperature for periods of up to 21 days. Major trends included the rapid degradation of long n‐alkanes and monosubstituted alkyl benzenes (e.g., toluene, ethylbenzene, and propylbenzene). Surprisingly, some longer branched alkanes (e.g., trimethyloctanes) were also susceptible to microbial attack. Although all ignitable liquids examined suffered at least to some extent from microbial degradation, gasoline, petroleum distillates, and oxygenates were the most susceptible. Isoparaffinic and naphthenic–paraffinic products were the most resistant to microbial degradation.     

Likelihood ratio methods for forensic comparison of evaporated gasoline residues

In the investigation of arson, evidence connecting a suspect to the fire scene may be obtained by comparing the composition of ignitable liquid residues found at the crime scene to ignitable liquids found in possession of the suspect. Interpreting the result of such a comparison is hampered by processes at the crime scene that result in evaporation, matrix interference, and microbial degradation of the ignitable liquid.Most commonly, gasoline is used as a fire accelerant in arson. In the current scientific literature on gasoline comparison, classification studies are reported for unevaporated and evaporated gasoline residues. In these studies the goal is to discriminate between samples of several sources of gasoline, based on a chemical analysis. While in classification studies the focus is on discrimination of gasolines, for forensic purposes a likelihood ratio approach is more relevant.In this work, a first step is made towards the ultimate goal of obtaining numerical values for the strength of evidence for the inference of identity of source in gasoline comparisons. Three likelihood ratio methods are presented for the comparison of evaporated gasoline residues (up to 75% weight loss under laboratory conditions). Two methods based on distance functions and one multivariate method were developed. The performance of the three methods is characterized by rates of misleading evidence, an analysis of the calibration and an information theoretical analysis.The three methods show strong improvement of discrimination as compared with a completely uninformative method. The two distance functions perform better than the multivariate method, in terms of discrimination and rates of misleading evidence.     

Determining the Method Threshold of Identification via Gas Chromatography–Mass Spectrometry of Weathered Gasoline Extracted from Burnt Nylon Carpet,

The Organization of Scientific Area Committees defines threshold of identification as the minimum concentration of ignitable liquid identifiable from gas chromatographic‐mass spectrometry data using accepted pattern identification criteria. We propose a method for determining this threshold for gasoline based on base peak to qualifier ratios of six compounds. The ion ratios were established for each compound in the neat gasoline. These ratios were then compared to those obtained for gasoline and 98% weathered gasoline both spiked onto burnt nylon carpet at 20 ppt down 0.50 ppt, and recovered from the carpet using headspace extraction (ASTM 1412). Identification was confirmed if the compounds’ ion ratios fell within ±25% of that in the neat sample. We found that ion ratios for all samples were acceptable for six compounds at 1.60 and 0.80 ppt for extracted neat and extracted 98% weathered gasoline, respectively, illustrating potential for incorporating into Quality Assurance Programs.     

Alternative fuels in fire debris analysis: biodiesel basics

Alternative fuels are becoming more prominent on the market today and, soon, fire debris analysts will start seeing them in liquid samples or in fire debris samples. Biodiesel fuel is one of the most common alternative fuels and is now readily available in many parts of the United States and around the world. This article introduces biodiesel to fire debris analysts. Biodiesel fuel is manufactured from vegetable oils and/or animal oils/fats. It is composed of fatty acid methyl esters (FAMEs) and is sold pure or as a blend with diesel fuel. When present in fire debris samples, it is recommended to extract the debris using passive headspace concentration on activated charcoal, possibly followed by a solvent extraction. The gas chromatographic analysis of the extract is first carried out with the same program as for regular ignitable liquid residues, and second with a program adapted to the analysis of FAMEs.     

火场样品中汽油与稀释剂燃烧残留物的区分方法探讨

目的探讨火场样品中汽油与稀释剂燃烧残留物的区分方法。方法样品用ATD—GC—MS法检验,检验结果通过对芳烃、烷烃、茚满、和萘系列的4个特征离子色谱图与已知汽油和稀释剂作比较,并结合向量夹角法计算样品与汽油色谱指纹图的相似度来区分汽油与稀释剂残留物。结果个别品种的稀释剂燃烧残留物与汽油很相似,但彼此有某些差别。结论使用本方法,一般能将汽油与稀释剂燃烧残留物区分开。