Removing interfering contaminations from gelatin lifters

Gelatin lifter is widely used for recovering shoeprints from crime scenes. Dusty shoeprints removed from paper with loose fibers, cloth or plasterboard, might be concealed by the detached fibers. A novel technique to clean the gelatin lifter from the interfering contaminations, using adhesive lifters, was developed. The adhesive lifter is applied directly on the surface of the gelatin lifter, and is removed instantly. The adhesive lifter removes the upper layer of the attached material on the gelatin lifter. After removing the concealing material from the hidden imprint, the quality of the visualized imprint is improved. The cleaning process can be applied as many times as needed and the optimum number is different for each substrate. The small dust particles comprising the shoeprint remained attached to the sticky side of the gelatin lifter even though the adhesion force applied by the adhesive lifter is great. Repeating the procedure too many times could harm the quality of the print severely, yet the advantages of this method are greater than the risks of relocation of image quality reduction.     

Improved method for shooting distance estimation. Part III. Bullet holes in cadavers

An improved method to estimate firing distance on human body surfaces is described. The novel part of the method includes a chemical test in addition to the traditional visual and microscopic examinations of the gunshot wounds. This chemical test consists of a transfer of the gunpowder residues from the area of a gunshot wound to an adhesive lifter; the residues are then visualized as total nitrite after alkaline hydrolysis by the Modified Griess Test (MGT). When cadavers are in an advanced stage of decomposition or when gunshot wounds are in hairy areas, the information obtained by this chemical test can be crucial for shooting distance evaluation. In other cases it may improve the accuracy of the examination. In some cases, the results obtained by this test may assist in the discrimination between entrance and exit gunshot wounds.     

Improved method for shooting distance determination. Part 2--bullet holes in objects that cannot be processed in the laboratory

An improved method for firing distance determination on exhibits that cannot be processed in the laboratory such as cars, doors, windows, or furniture is described. The novel part of the method includes transfer of total nitrite (nitrite ions and smokeless powder residues) from the target to an adhesive lifter. After the transfer, vaporous lead and copper deposits around the bullet entrance hole are visualized on the target by sodium rhodizonate and rubeanic acid, respectively. The Modified Griess Test is carried out after alkaline hydrolysis of the smokeless powder residues on the adhesive lifter.     

Improved method for shooting distance estimation. Part 1. Bullet holes in clothing items

An improved method for firing distance estimation on clothing is described. The novel part of the method includes transfer of total nitrite (nitrite ions and smokeless powder residues) from the target to an adhesive lifter. After the transfer, lead and copper deposits around the bullet entrance hole are visualized by rhodizonate and rubeanic acid, respectively. The Modified Greiss Test is carried out after alkaline hydrolysis of the smokeless powder residues on the adhesive lifter.     

Nondestructive Biological Evidence Collection with Alternative Swabs and Adhesive Lifters

In forensic science, biological material is typically collected from evidence via wet/dry double swabbing with cotton swabs, which is effective but can visibly damage an item's surface. When an item's appearance must be maintained, dry swabbing and tape‐lifting may be employed as collection techniques that are visually nondestructive to substrates' surfaces. This study examined the efficacy of alternative swab matrices and adhesive lifters when collecting blood and fingerprints from glass, painted drywall, 100% cotton, and copy paper. Data were evaluated by determining the percent profile and quality score for each STR profile generated. Hydraflock^® swabs, BVDA Gellifters^®, and Scenesafe FAST? tape performed as well as or better than cotton swabs when collecting fingerprints from painted drywall and 100% cotton. Collection success was also dependent on the type of biological material sampled and the substrate on which it was deposited. These results demonstrated that alternative swabs and adhesive lifters can be effective for nondestructive DNA collection from various substrates.     

A comparative research of two lifting methods: electrostatic lifter and gelatin lifter

Two-dimensional dust shoeprints are often of very high resolution and contain unique features. Lifting these prints in the most effective method may contribute much to preserving these fine details. A research was conducted by experts from Israel and Switzerland to compare gelatin lifters and electrostatic lifters for lifting shoeprints. Several substrates were chosen, and on each material a set of dry dust shoeprints was made. A set of wet prints was made on paper as well. The shoeprints were approximately of the same quality, and the only variable was the nature of the material. On substrates indifferent to the method used, the preferable sequence was tested. Gelatin lifter was superior on most substrates and for wet prints. The superior sequence for using both methods is electrostatic lifting followed by gelatin lifter.     

Lifting techniques for finger marks on human skin previous enhancement by Swedish Black powder — A preliminary study

An examination was done to investigate whether certain lifting techniques can lift recovered latent fingerprints on human skin surfaces of living subjects. For recovery Swedish Soot powder mixture (Swedish Black) was used.Donors intentionally placed fingerprints on the skin surface of living subjects. Finger marks were then in all cases recovered with Swedish Black powder. The procedure was repeated after 1 h and 4 h. Treated finger marks were secured and preserved as latent fingerprint evidence by different lifting processes. Having examined skin surfaces and finger marks we observed that the lifters such as white instant lifter, white fingerprint gelatin, black fingerprint gelatin, silicone, transparent adhesive tape, are suitable. Moreover, white fingerprint gelatin and white instant lifter proved to be very good at lifting treated finger marks. Black fingerprint gelatin was very good also, but finger marks were examined by slant light.     

A novel method for the analysis of discharged smokeless powder residues

A novel method for the estimation of intermediate-long firing distance range is proposed. The method is based on the characterization and chemical analysis of the smokeless powder particles on the target. An adhesive lifter is applied to collect the suspected gunshot residues (GSRs) from the surface of an object, and a Modified Griess Test (MGT) is carried out after alkaline hydrolysis on the adhesive lifter. Visualized particles are removed from the adhesive lifter under a microscope. Two systems are used for the analysis of organic discharge residues from the smokeless powder: (1) gas chromatography/thermal energy analysis (GC/TEA) for the analysis of nitroglycerine (NG) and 2,4-dinitrotoluene (2,4-DNT), (2) gas chromatography/mass spectrometry (GC/MS) for the identification of organic components such as DNT, NG, and some stabilizers. By using this procedure and confirming that the suspected particles are indeed GSR, one can estimate the intermediate-long firing distance of c. 0.75-3 m in the presence of very few particles and provide information for the classification of ammunition type in casework.     

Lifting shoeprints using gelatin lifters and a hydraulic press

A method for lifting two-dimensional dust footwear marks on rough or porous surfaces, such as cardboard or cloth, using a hydraulic press, was examined. It was found that exerting pressure on the lifter by the press usually improves the quality of the results. When the shoeprints were on rough or soft surfaces, the prints transferred to the gelatin lifters were better than those obtained by the conventional method. In other cases, using the press did not improve the results but was much simpler to apply. Based on the results of this study, the hydraulic press/gelatin lifter method (the "press method") is used at the authors' laboratory, depending on the surface from which the shoeprint is to be lifted. It is the authors' intention to apply the method to other surfaces after finding the optimal pressure for surfaces with loose fibers.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

Recovery of DNA from Latent Fingerprint Tape Lifts Archived Against Matte Acetate

This study was driven by court order to examine methods to remove, extract, and STR‐type potential DNA entrapped between latent fingerprint lifting tape and matte acetate that was collected from a 1977 crime scene. Results indicate that recovery of appreciable quantities of DNA is more challenging once adhesive is attached to matte acetate cards and even more difficult when fixed following black powder enhancement. STR amplification of extracts from entrapped fingermarks collected following the dusting/lifting procedure did not produce robust profiles, and extraneous peaks not expressed by print donors were detected for some samples. A hearing was set to argue whether there was DNA remaining to be tested, and if so, whether that DNA could be exculpatory in this postconviction matter. The studies herein provided the basis for the court's decision to not require the testing.     

The Use of Adhesive Tape for Recovery of DNA from Crime Scene Items

Abstract: The selection of the appropriate method of collection of biological material from crime scene items can be crucial to obtaining a DNA profile. The three techniques commonly used for sampling items are: cutting, swabbing, and taping. The tape sampling technique offers an advantage, in that it enables the collection of a potentially highly informative source of DNA, shed epithelial cells, from selected areas on crime scene items (the inside fingers of a glove, for instance). Furthermore, surface collection of biological material by taping reduces co‐sampling of known PCR inhibitors such as clothing dyes. The correct choice of tape for crime scene item sampling is important. Not all tapes are suitable for biological trace evidence collection as well as DNA extraction. We report on one tape that met both these criteria. Three different cases are presented which demonstrate the usefulness of adhesive tape sampling of crime items. Finally, the advantages of the tape collection technique are discussed and guidelines for preferred areas of tape sampling on various casework items are presented.     

The transfer of human DNA by Lucilia cuprina (Meigen) (Diptera: Calliphoridae)

Blowflies leave deposits, termed artefacts, through the processes of excretion and regurgitation. To date, little consideration has been given to the possibility of adult blowflies consuming biological material and subsequently acting as vectors of human DNA through these artefacts. In this study, Lucilia cuprina (Meigen) (Diptera: Calliphoridae) were fed either human blood or human semen ad libitum and their artefacts were analysed for human DNA content. Samples containing 1, 10, 30 and 50 artefacts were tested. Quantifiable and typeable levels of human DNA were found in samples derived from both food sources, and even in samples containing a single artefact. Semen-derived artefacts contained significantly more human DNA than artefacts produced after a blood meal. Consequently a smaller number of artefacts was required to collect sufficient DNA for genotyping. These findings are forensically important as it provides investigators with another potential source of DNA at a crime scene where a body has been moved, or an attempt has been made to clean up biological material. They also highlight how fly artefacts could potentially contaminate and compromise evidence.     

Exploring the recovery and detection of messenger RNA and DNA from enhanced fingermarks in blood

Often in the examination of bloodstained fingermarks discussion occurs around whether to prioritise the fingerprint evidence or focus on the biological evidence. Collecting a sample for genetic profiling may result in the loss of ridge detail that could have been used for fingerprint comparison. Fingermark enhancement and recovery methods along with sample collection methods could also compromise downstream genetic analysis. Previous forensic casework has highlighted circumstances where, after enhancement had been performed, it would have been extremely valuable to both identify the body fluid and generate a DNA profile from the same sample.We enhanced depletion series of fingermarks made in blood, using single treatments consisting of aqueous amido black, methanol-based amido black, acid yellow and leucocrystal violet, and exposure to long wave UV light. We then extracted the DNA and RNA for profiling, to assess the recovery and detection of genetic material from the enhanced fingermarks.We have shown that genetic profiling of bloodstained fingermarks can be successful after chemical enhancement; however it may still be necessary to prioritise evidence types in certain circumstances. From our results it appears that even with visible bloodstained fingermarks, leucocrystal violet can reduce the effectiveness of subsequent messenger RNA profiling. Aqueous amido black and acid yellow also have adverse effects on messenger RNA profiling of depleted fingermarks with low levels of cellular material. These results help with forensic decision-making by expanding knowledge of the extent of the detrimental effects of blood-enhancement reagents on both DNA profiling and body fluid identification using messenger RNA profiling.     

Loss of heterozygosity detected in a short tandem repeat (STR) locus commonly used for human DNA identification

Short tandem repeat (STR) markers are commonly used in basic genetic research and in human identification testing. Clinically, STRs can be used to study genetic alterations in tumors. A genetic deletion common to many types of cancer is referred to as the loss of heterozygosity (LOH). Numerous examples of LOH in cancer have been described and some have been mapped to areas located in close proximity to markers employed in human identity testing. Despite this fact, LOH has rarely been observed for STR loci commonly employed in forensic testing. Recently, for medico-legal purposes, we were asked to determine whether a tissue biopsy originated from a particular individual. For a reference source we assessed two specimens, one from normal tissue and one from cancerous tissue. When both reference specimens were used to generate DNA profiles, we observed LOH at one STR locus, D13S317. As demonstrated in other cancers only the cancerous biopsy demonstrated LOH. The forensic community should be cognizant of these unusual circumstances because, as identification of human DNA continues to be used more extensively, certain instances will arise in which reference material will not be readily available. In these situations, archived specimens may be employed as a reference source. Clinical specimens such as tissue biopsies should be used with caution if they have not been confirmed to contain normal tissue.     

Rapid genomic DNA extraction (RGDE)

Hyperpolymorphic short tandem repetitive DNA sequences, STRs or microsatellites, have become widely used in human identification, particularly in criminal cases and in mass disasters. In such cases the substrates for the analyses may be decomposed as a biological material, a fact that has to be taken into account when choosing the appropriate casework methods. Nowadays expanded windows have been opened to the world especially in the area of genetic and biology science by performance of big projects such as human genome project. In this regard, one of the primary and important steps for all is DNA extraction with high quality and quantity in minimum time from biological material. By using RGDE method, genomic DNA with high quality and quantity can be acquired in the shortest time which has been presented in the world up to now. In this paper we report the evaluation of DNA extraction in this method.     

DNA Profiles from Fingerprint Lifts—Enhancing the Evidential Value of Fingermarks Through Successful DNA Typing

This study evaluated the compatibility of the most common enhancement methods and lifting techniques with DNA profiling. Emphasis is placed on modern lifting techniques (i.e., gelatin lifters and Isomark?) and historical fingerprint lifts for which limited research has been previously conducted. A total of 180 fingerprints were deposited on a glass surface, enhanced, lifted, and processed for DNA typing. DNA could be extracted and profiled for all the powders and lifts tested and from both groomed fingerprints and natural prints with no significant difference in the percentage of profile recovered. DNA profiles could also be obtained from historical fingerprint lifts (79.2% of 72 lifts) with one or more alleles detected. These results demonstrate the compatibility between different powder/lift combinations and DNA profiling therefore augmenting the evidential value of fingerprints in forensic casework.     

Use of forensic investigations in anti-doping

The fight against doping is mainly focused on direct detection, using analytical methods for the detection of doping agents in biological samples. However, the World Anti-Doping Code also defines doping as possession, administration or attempted administration of prohibited substances or methods, trafficking or attempted trafficking in any prohibited substance or methods. As these issues correspond to criminal investigation, a forensic approach can help assessing potential violation of these rules. In the context of a rowing competition, genetic analyses were conducted on biological samples collected in infusion apparatus, bags and tubing in order to obtain DNA profiles. As no database of athletes' DNA profiles was available, the use of information from the location detection as well as contextual information were key to determine a population of suspected athletes and to obtain reference DNA profiles for comparison. Analysis of samples from infusion systems provided 8 different DNA profiles. The comparison between these profiles and 8 reference profiles from suspected athletes could not be distinguished. This case-study is one of the first where a forensic approach was applied for anti-doping purposes. Based on this investigation, the International Rowing Federation authorities decided to ban not only the incriminated athletes, but also the coaches and officials for 2 years.     

A single approach to the recovery of DNA and firearm discharge residue evidence.

The Laboratory of the Strathclyde Police Forensic Support Department extracts DNA from cellular material recovered from garments submitted as evidence. The standard method used an adhesive tape attached to a plastic or acetate support. This paper demonstrates a method whereby a single sample, recovered from clothing, can be examined for Firearm Discharge Residue and then extracted for DNA.