Analysis of salivary DNA evidence from a bite mark on a body submerged in water.

A female body was recovered after approximately 5.5 h in a river with slow-moving current. On the victim's right breast, a patterned injury was discovered and determined to be from human adult teeth. Evidence was collected according to established techniques including recovery of saliva from the bite mark area despite the body being found submerged in water. DNA analysis by PCR using polymorphic STR markers revealed a DNA profile of mixed origin. In addition to the victim's DNA profile, a genotype contribution from the perpetrator was identified as a minor component. The DNA typing results from the bite mark correlated with the DNA typing results obtained from other biological trace evidence identified from the victim's genital samples. The bite mark and the DNA evidence were used to screen suspects and played an important role in obtaining resolution of this case. Consequently, it is advisable that investigators routinely swab for salivary DNA in bite mark cases, even when the amount is thought to be minimal.     

Presentation of a three-banded allele pattern--analysis and interpretation

The Israel police forensic biology laboratory received as an item of evidence in an attempted murder case, a pair of trousers belonging to a suspect. A bloodstain was observed on the trousers and analyzed by STR typing for nine loci using the Promega GenePrint STR silver stain detection kits. The genetic profile defined was found to be identical to that of the victim's at all nine loci. Within this profile a three-banded allele pattern was observed at the D16S539 locus, both in the bloodstain and in the victim's reference blood sample. Confirmation of this phenomenon was accomplished by amplifying the extracted DNA from both the trousers and the victim's blood sample using the PowerPlex 16 kit by Promega and the AmpFlSTR SGM Plus kit by Perkin Elmer, followed by analysis of the amplification products by capillary electrophoresis on the ABI prism 310 genetic analyzer. The same three-banded allele pattern was observed at the D16S539 locus in both specimen and reference DNA, using each of the three kits. Three additional loci located on chromosome 16 (D16S3407, D16S2617 and D16S3082), not employed for forensic identification, were also analyzed and did not show three-banded allele pattern.     

Removal of a PCR inhibitor and resolution of DNA STR types in mixed human-canine stains from a five year old case.

The analysis of biological trace evidence from a reopened investigation into a 1991 murder from Vernon, B.C. revealed mixed human and dog bloodstains on blue jean pants that contained a PCR inhibitory substance. The presence of the inhibitory substance was detected by the inhibition caused from adding a small aliquot of the test DNA extract into a PCR reaction designed to produce a known standard product. The removal of the PCR inhibitory substance was accomplished by treating the extracted DNA with Thiopropyl Sepharose 6B beads. DNA profiles from two human contributors and a canine were obtained using species specific polymorphic STR markers. The two human DNA profiles obtained from blue jean pants were resolved, one matched the suspect and the other matched the victim. The DNA profile from the canine component matched that obtained from the known sample of the victim's dog who was also slain during the assault. This evidence along with other DNA typing evidence was critical in obtaining a resolution of the case.     

Recovery and STR amplification of DNA from RFLP membranes

Restriction fragment length polymorphism (RFLP) techniques were utilized in the forensic DNA community until the mid 1990s when less labor-intensive polymerase chain reaction short tandem repeat (PCR STR) techniques became available. During the transition from RFLP technology to PCR-based STR platforms, a method for comparing RFLP profiles to STR profiles was not developed. While the preferred approach for applying new technology to old cases would be to analyze the original biological stain, this is not always possible. For unsolved cases that previously underwent RFLP analysis, the only DNA remaining may be restriction cut and bound to nylon membranes. These studies investigate several methods for obtaining STR profiles from membrane bound DNA, including removal of bound DNA with bases, acids, detergents, various chemicals, and conventional cell extraction solutions. Direct multiplex STR amplification of template in the membrane-bound state was also explored. A partial STR profile was obtained from DNA that was recovered from an archived membrane using conventional extraction buffer components, indicating promise for recovering useful STR information from RFLP membranes that have been maintained in long-term frozen storage.     

Recovery of genomic DNA from archived PCR product mixes for subsequent multiplex amplification and typing of additional loci: forensic significance for older unsolved criminal cases

A method for genomic DNA recovery from different types of PCR product mixes suitable for multiplex amplification and typing using the Profiler Plus STR typing system has been investigated. The application of this method is of significance in cases where the original DNA samples have been exhausted due to repeated typing analyses in an effort to maximize their evidentiary value. Such cases typically involve samples analyzed using the available DNA typing systems of the time which gave a markedly lower power of discrimination, either alone or in combination, compared to that of modern multiplex STR typing systems. It was found that an effective method for recovering genomic DNA from HLA-DQA1 +PM and CTT triplex amplification mixes, suitable for reproducible achievement of the complete Profiler Plus profile, involved the use of Amicon Microcon-100 microconcentrators. Interestingly, this method was not required to achieve the complete nine STR profile using D1S80 amplification mixes.     

微量DNA的短串联重复序列分型可行性

目的了解微量DNA分型的法医学应用的可行性。方法一系列浓度的DNA模板用PowerPlexTM16System试剂盒扩增,并用ABI377DNA测序仪进行短串联重复序列(STR)的分型。结果当模板量小于250pg时,部分位点发生了等位基因漏扩,并出现非特异带、杂合子扩增不平衡等干扰分型的杂峰。结论上述这些不正常的现象可能会导致分型错误。在对微量检材的DNA检验结果进行判型时一定要小心谨慎,全面考虑。     

Single sperm cell isolation by micromanipulation for human identification in sexual assault

This study proposes a new alternative solution in preferential extraction methods or microdissection to isolate and analyse single sperm cells in case of sexual assault. After the transfer of swabs in liquid culture medium, perpetrator's spermatozoas can be physically separated from victim's epithelial cells by using classical techniques of micromanipulation as ICSI (IntraCytoplasmic Spermatozoa Injection), usually applied for IVF (In vitro Fertilization).     

Laser microdissection separation of pure spermatozoa from epithelial cells for short tandem repeat analysis

Short tandem repeat (STR) analysis is a valuable tool in identifying the source of biological stains, particularly from the investigation of sexual assault crimes. Difficulties in analysis arise primarily in the interpretation of mixed genotypes when cell separation of the sexual assailant's sperm from the victim's cells is incomplete. The forensic community continues to seek improvements in cell separation methods from mixtures for DNA typing. The feasibility of applying laser microdissection (LMD) technology to precisely separate sexual assault cell mixtures by visual inspection coupled with laser dissection was assessed through three experiments. First, various histological stains were evaluated for use with LMD and DNA analysis. Second, different DNA isolation methods were evaluated on LMD-collected cells. Finally, STR analysis was performed on LMD-separated sperm cells from mixtures of semen and female buccal epithelial cells. The results indicated (a) hematoxylin/eosin staining performed best in its ability to differentiate sperm and epithelial cells while exhibiting the least negative effect on further downstream analysis; (b) both QIAamp and Lyse-N-Go methods were useful for recovery of DNA from LMD-collected sperm cells; and (c) LMD separation provided clear STR profiles of the male donor with the absence of any additional alleles from the female donor. This report describes an efficient, low-manipulation LMD method for the efficient separation of spermatozoa from two-donor sperm/epithelial cell mixtures.     

A time course study on STR profiles derived from human bone, muscle, and bone marrow.

The use of the polymerase chain reaction (PCR) to define deoxyribonucleic acid (DNA) types at several loci was investigated. PCR was used to amplify nine short tandem repeat (STR) loci along with the amelogenin locus on the X and Y chromosomes using the AmpF/STR Profiler Plus PCR amplification kit (Perkin Elmer). Rib bones were collected from 12 individuals. Five cm portions were buried at a depth of approximately 30 cm and 5 cm portions were left on the surface of the ground. Samples were exposed to the environment for periods of time ranging from two weeks to 17 months. Dried blood standards were prepared for use as reference standards for each rib sample. Bone, muscle, and bone marrow were collected from each sample. DNA from each tissue type was extracted. Complete profile results were obtained from the surface bone samples out to an exposure time of 17 months. None of the muscle or bone marrow samples produced complete profile results beyond eight weeks. All DNA typing results from complete or incomplete profiles were consistent with DNA typing results of the corresponding blood standard. Results suggest that using the AmpF/STR Profiler Plus PCR Amplification Kit is a valid way to establish the DNA profile of tissue types from human remains.     

Statistical analysis of DNA mixtures using peak area information and allelic drop out

A case of a woman killed in Perugia is reported. The woman was beaten to death and the body showed evidence of bites, kicks and punches. The request of the Court was to verify the presence of bites and if they belonged to humans. Morphological examination and genetic analysis with human Y-specific markers were performed in order to verify the origin of the bites. The DNA profile from the surrounded area of the traces was compared with the profile of the victim's husband (the suspect).The results showed a match between the profile of the suspect and that of the traces for all loci examined. Due to the fact that also other relatives of the husband's male lineage lived in the same house, it was not possible to identify the man who really contributed to the traces. Therefore, the analysis was implemented with autosomal STR markers, which showed a mixed genetic profile. In order to verify the number and the identity of the contributors, statistical analysis based upon peak area information was performed with Probabilistic Expert Systems.     

Higher Capillary Electrophoresis Injection Settings as an Efficient Approach to Increase the Sensitivity of STR Typing

Abstract:  Evidentiary traces may contain low quantities of DNA, and regularly incomplete short tandem repeat (STR) profiles are obtained. In this study, higher capillary electrophoresis injection settings were used to efficiently improve incomplete STR profiles generated from low-level DNA samples under standard polymerase chain reaction (PCR) conditions. The method involves capillary electrophoresis with higher injection voltage and extended injection time. STR peak heights increased six-fold. Inherent to the analysis of low-level DNA samples, we observed stochastic amplification artifacts, mainly in the form of allele dropout and heterozygous peak imbalance. Increased stutter ratios and allele drop-in were rarely seen. Upon STR typing of 10:1 admixed samples, the profile of the major component did not become overloaded when using higher injection settings as was observed upon elevated cycling. Thereby an improved profile of the minor component was obtained. For low-level DNA casework samples, we adhere to independent replication of the PCR amplification and boosted capillary electrophoresis.     

STR Profiles from DNA Samples with "Undetected" or Low Quantifiler™ Results

Abstract:  Screening methods capable of identifying DNA samples that will not yield short tandem repeat (STR) profiles are desired. In the past, quantitation methods have not been sensitive enough for this purpose. In this study, low level DNA samples were used to assess whether Quantifiler™ has a minimum quantitation value below which STR profiles would consistently fail to be detected. Buccal swabs were obtained and the DNA extracted, quantified, and serially diluted to concentrations ranging from 0.002 to 0.250 ng/μL. Samples were analyzed once with Quantifiler™, followed by Profiler Plus™ amplification and capillary electrophoresis analysis. An absolute minimum value below which STR results were unobtainable could not be defined. From the 96 low level samples tested, STR loci (including one full profile) were successfully amplified and detected from 27% of the samples "undetected" by Quantifiler™. However, no STR alleles were detected in 73% of these "undetected" samples, indicating that Quantifiler™ data may be useful for predicting STR typing success.     

An evaluation of the relevance of routine DNA typing of fingernail clippings for forensic casework

DNA extracted from fingernail clippings of victims in forensic cases is a possible source of DNA from the perpetrator in cases where victims struggled or defended themselves. The source of this DNA on a victim's fingernails could possibly originate from contact with the suspect's blood, saliva, semen or scratched skin. In this technical note we evaluate the relevance of routine DNA typing of fingernail clippings in the forensic biology laboratory when, in real casework, normally only small quantities of nail material is sent. This was carried out by extracting DNA from fingernail clippings from a number of volunteers, before and after aggressively scratching other volunteers. No blood was drawn from the scratching, but skin flakes were observed under the nails before cutting and subsequent DNA typing. The DNA extracted was then typed using the STR systems: HUMTHO1, HUMTPOX and HUMCSF1PO (CTT triplex) and the system of D1S80. These profiles were compared with profiles achieved by similar typing of buccal swabs as a reference from each volunteer. In this study, the profile detected from each volunteer's clippings was the same before and after scratching, and matched the profile of the corresponding volunteer as defined by typing each volunteer's reference buccal swab. Fingernail clippings that are sent to our lab in actual casework are usually so small that additional treatment by swabbing or removing debris from below the clipping is not possible. For this reason, in this simulation the entire clippings were used for DNA extraction, to maximize the possibility of finding an additional profile. In conclusion, the findings from this study show that although the profiles obtained when typing fingernail clippings are those of the donors themselves, we suggest that typing of fingernail clippings should be carried out in forensic cases only when relevant. We would suggest that fingernail clippings not be routinely sent to the biology laboratory as items of evidence to be tested.     

Victim's scalp on the killer's head. An unusual case of criminal postmortem mutilation

A case of unusual postmortem mutilation of a victim's body is presented. After killing his father, the son decapitated his body and dissected the scalp free, forming a mask of the father's head and neck. The young man wore the scalp-mask over his own head to imitate the father. The motive of the murder was revenge, and the postmortem mutilation was the realization of the perpetrator's fantasies, symbolically representing a penalty for the reprehensible past life of his father.     

Analysis of Mitochondrial DNA from a Burned,Ninhydrin‐Treated Paper Towel

Contact‐based evidence is likely to have limited quantities of DNA and may yield mixed profiles due to preexisting or contaminating DNA. In a recent arson investigation, a paper towel was collected and used as circumstantial evidence. The paper towel was partially burned and was likely set on fire with flammable liquid. As part of the investigation, the paper towel was treated with ninhydrin to visualize fingerprint evidence. Initial DNA analysis of two swabs was negative for short tandem repeat (STR) markers and revealed a mixture of mitochondrial DNA (mtDNA). Analysis of 13 additional cuttings yielded four more mixed profiles, but also two samples with a common single‐source profile. The single‐source mtDNA profile matched that of the primary suspect in the case. Thus, even if initial mtDNA analysis yields a mixed profile, a sampling strategy involving multiple locations can improve the chance of obtaining valuable single‐source mtDNA profiles from compromised evidence in criminal casework.     

An investigation of two methods of DNA recovery from fired and unfired 9 mm ammunition

Cartridge cases are often recovered from crime scenes involving firearms and, in the United Kingdom (where gun possession is strictly controlled), these are commonly from 9 mm calibre ammunition. The ability to obtain informative DNA profiles from touch DNA on recovered cartridges could have a significant impact on the investigation of that type of offence. However, this avenue may not be routinely considered as investigators in the UK have historically had a low expectation of obtaining useful DNA profiles. This stance may not be unreasonable given that (a) only trace amounts of DNA are likely to have been transferred onto the cartridge cases through handling; and (b) when the cartridge is spent, the potential deterioration of that DNA caused by the act of discharging the weapon.We introduce a novel semi-automatable method using direct lysis for the recovery of DNA from ammunition and compare it with a traditional double-swabbing method (using wet and dry swabs). DNA profiling of the DNA recovered using both methods was carried out using the ESI17 FAST STR system (Promega). This demonstrated a significant increase in DNA recovery using the direct lysis approach, and correspondingly improved STR results.We also investigated the effect on the recovery and profiling of DNA from fired, and unfired, 9 mm cartridges using the direct lysis technique. These results demonstrate that DNA suitable for STR analysis can still be recovered from fired ammunition with only slightly reduced yields compared to unfired ammunition. In these experiments, the handler of the ammunition was most commonly either the sole contributor or the major contributor to the recovered DNA profile.     

Optimization of DNA recovery from toothbrushes

In human identification, the victim's toothbrush is an invaluable personal item as the deposited cellular material contains DNA from which a reference profile can be produced. The profile obtained then allows direct comparison to be made with the profile from the unidentified body. This study was undertaken to determine the minimum number of bristle bundles that would generate a complete DNA profile. The minimum period of usage for a toothbrush to retain enough cells for genotyping was also investigated. We also tested two commonly used DNA extraction methods: QIAamp^® DNA Mini Kit and Chelex^® 100 to explore the efficiency of these protocols in recovering DNA from toothbrushes. In this experiment, volunteers brushed their teeth for 1, 7, 14, or 30 days. DNA was extracted from 5 and 10 bundles of bristles cut from the collected toothbrushes. The amount of DNA recovered was quantified by quantitative real-time PCR, and DNA genotyping was performed for each sample. Data revealed that QIAamp^® DNA Mini Kit performed better at yielding DNA in terms of purity, quantity, and quality than Chelex^® 100. It was also found that, with a suitable method of recovery, DNA samples from five bundles of bristles from all of the toothbrushes generated complete profiles. Based on the experimental results, a general guideline concerning the appropriate extraction method and the quantity of the starting material for the analysis of DNA from toothbrushes could be suggested.     

DNA Preparation from Sexual Assault Cases by Selective Degradation of Contaminating DNA from the Victim

Abstract:  The standard method to purify sperm DNA from vaginal swabs taken from rape victims is to selectively digest the victim's epithelial cells to solubilize the victim's DNA, and then separate the soluble DNA from the intact sperm by centrifugation. A different approach to removing the soluble victim's DNA is to selectively degrade it using a nuclease, DNase I. DNase I reduces the amount of soluble DNA by over 1000-fold, while having virtually no effect on the sperm DNA remaining in the sperm head and inaccessible to the enzyme. Nuclease inactivation and sperm lysis then yield a soluble, pure male DNA fraction. An aliquot of soluble DNA is removed prior to nuclease addition to provide the victim's fraction. Vaginal swabs taken at defined time points following consensual sex and taken from rape victims were processed using the nuclease method or the standard method and the nuclease method gave superior short tandem repeat profiles.     

Full STR profile of a 67-year-old bone found in a fresh water lake

DNA extraction from and DNA typing of fresh water-exposed aged bone specimens poses a challenging task and is not very well examined. This study presents a new method to extract typable DNA from such problematic bone specimens. The procedure comprises low-heat drilling and cryogrinding, mild lysis conditions, and silica-column-based DNA cleaning. DNA quantity is assessed by quantitative PCR prior to short tandem repeat (STR) amplification. The procedure was employed with a 67-year-old tibia bone fragment recovered from a fresh water lake and succeeded to produce a full STR profile using the MPX-SP1 and MPX-SP2 mini-STR kits and a partial profile with 12 successfully amplified STRs using the Identifiler STR kit. The new method for the extraction of DNA from aged fresh water-exposed bone specimens presented herein was successfully applied to prepare DNA of sufficient quality and quantity to generate a full STR profile.     

Informativeness of the CODIS STR loci for admixture analysis

Population admixture (or ancestry) is used as an approach to gene discovery in complex diseases, particularly when the disease prevalence varies widely across geographic populations. Admixture analysis could be useful for forensics because an indication of a perpetrator's ancestry would narrow the pool of suspects for a particular crime. The purpose of this study was to use Fisher's information to identify informative sets of markers for admixture analysis. Using published founding population allele frequencies we test three marker sets for efficacy for estimating admixture: the FBI CODIS Core STR loci, the HGDP-CEPH Human Genome Diversity Cell Line Panel and the set of 39 ancestry informative SNPS from the Shriver lab at Pennsylvania State University. We conclude that the FBI CODIS Core STR set is valid for admixture analysis, but not the most precise. We recommend using a combination of the most informative markers from the HGDP-CEPH and Shriver loci sets.