Methods of making the plaster copies of skulls for the medical and criminalistic identification of individuals

A possibility was studied to use the plaster copies of skulls in the forensic medical identification of personality by applying the craniofacial method. No dependence was found between the plaster casts and the moulding types. Differences between the same craniometric sizes in the skull and in its cast are of an incidental nature. Such incidental deviation is related with an accuracy of determining the localization of craniometric points and with an instrumental precision of measuring devices. The necessity is substantiated that, while making a craniofacial examination, it is necessary to mark all anthropometric points in the skull cast, with the original being a control. The use of a plaster skull cast is possible in those cases, when the burial of the remains must be done in full.     

烧骨残片种属鉴定的研究

为了找出常见动物骨骼焚烧残片的种属鉴定方法,笔者对猪、羊,股骨及肱骨的断端,猪、羊、牛颅骨的残片(额顶部),焚烧后进行了观察及测量,并与人类股骨、肱骨及焚烧的颅骨残片进行了比较.结果发现,长骨滋养孔的位置,骨干骨壁厚度,以及颅骨厚度,颅缝形态及内板表面特征等方面,是鉴定骨骼残片种属的有价值的特征.根据对常见动物长骨及颅骨残片的现察及研究,提出了骨骼残片种属鉴定的方法.     

The forensic medical determination of the site of the external application of force by the bone microdamages

The article deals with new approach to determination of site of outer force application. Investigation of bone grind pieces from zones of supposed external action resulted in detection of microfissures whose maximal concentration corresponded to the point of force application. It was stated that these microfissures precede fracture formation and occur as a result of bone loading due to plastic deformation. That's why even in bones which experienced prethreshold loads microfissures are always detected and used as expert criteria for determination of site of outer force application. Zones of soft tissue lesions, signs of permanent (residual) bone deformity in fractures of adjacent bones serve as reference points for cutting bone fragments out and using them to prepare bone grind pieces.     

Sex determination by discriminant function analysis of lateral cranial form.

To sex the cranium, morphological features of cranial specimens were quantified with a personal computer that automatically measures distance and gradient for 39 craniometric points in the lateral contour line of the skull, which were digitized by a tablet digitizer connected to the computer. Specimens used for discriminant analysis were 50 male and 50 female adult Japanese skulls. The lateral contour showed sex differences in the nasal bone, supraorbital ridge, forehead and vertex. The nasal bone and supraorbital ridge were more developed in male contour line, and the forehead was more rounded in female contour line. But compared with the supraorbital ridge and forehead, the vertex had a wide variety of contour lines in both sexes. The vertex seemed to be less reliable as the indicator of sex. The sex differences were better reflected by gradient than distance. From variables of the gradient and distance showing significant sex differences, the discriminant function was derived and tested in 21 other specimens (13 male and 8 female skulls). The mean ratio of correct sexing of the human skull by the discriminant function was 86%.     

Value of skull identification as evidence using a superimposed video image technic with reference to individual craniometric differences in the human skull

The possibility of using the video superimposition technique for the identification of a skull by comparing it with photographs of missing persons is based on the fact that the human skull, unlike any other part of the human skeleton, shows unmistakable individual characteristics. In order to obtain a quantification, the individuality of human skulls is defined in terms of craniometric data and their probability distribution. First calculations based on the coordinates of some important encephalometric points of 52 European skulls suggest that there are individual aspects comparable to those of fingerprints. Under certain conditions, the video superimposition technique can establish very strong evidence for the identity of an unknown skull, provided that it is applied correctly and carefully.     

Determination of race and sex of the human skull by discriminant function analysis of linear and angular dimensions

The race and sex of the human skull can be determined by craniometry. In this paper we suggest that a large number of craniometric measurements does not necessarily give the best possible discrimination for race and test the performance of subsets of variables drawn from various skull regions, or extracted mathematically on the basis of their discriminatory power. We also suggest that the best discriminators for race are not necessarily the best for sex, and that skulls of unknown provenance are best tested first for race and then for sex, using different variables for each purpose.     

Age, sex and body mass index in relation to calvarial diploe thickness and craniometric data on MRI

It might be critical to determine sex, body mass and age of the individual from skull in forensic medicine and anthropology. Our purpose in this study was to evaluate whether a relationship existed between the diploeic bone thickness measured from glabella, bregma, lambda, opisthocranion, and euryon regions and sex, age and body mass index of the individual. Glabella-opisthocranion, vertex-basion, euryon-euryon, basion-opisthion length were also determined for the same purpose. The anthropological landmarks were determined on sagittal and axial T1-weighted sequences and measurements were obtained on a workstation by two radiologists. A total of 107 subjects (F/M:59/48; mean age: 45.05+/-15.28, age range: 21-81) were included in the study. The mean body mass index was 25.51+/-4.44 [17.50-41]. There was a statistically significant linear correlation between age and diploe thickness from glabella, bregma, lambda, opisthocranion, right and left euryon. There was sexual dimorphism in all craniometric data including the distance between glabella-opisthocranion, vertex-basion, euryon-euryon, basion-opisthion, and calvarial volume. There was a statistically significant linear correlation between body mass index and basion-opisthion length. The diploe thicknesses from certain points of the calvarium are statistically related to each other. A standard cerebral MRI examination would be sufficient to obtain anthropological landmarks and craniometric data. According to this study, it might be possible to identify age, sex and body mass index of the individual from diploeic thickness and craniometric data.     

大鼠颅骨材料力学和骨质参数的增龄性变化

目的 通过检测大鼠颅骨材料力学和骨质参数,探讨二者关系及其与年龄的相关性.方法 48只健康雄性SD大鼠按年龄分为2、4、6、8、17、26、52和104周龄组,每组6只.利用KDⅡ-0.2型微机控制电子万能试验机压缩右侧颅盖骨检测其材料力学参数(极限载荷、压缩强度、压缩模量),之后分离颅骨骨片进行Micro-CT系统扫...     

Role of preoperative 3-dimensional computed tomography reconstruction in depressed skull fractures treated with craniectomy: a case report of forensic interest

Patients affected by cranial trauma with depressed skull fractures and increased intracranial pressure generally undergo neurosurgical intervention. Because craniotomy and craniectomy remove skull fragments and generate new fracture lines, they complicate forensic examination and sometimes prevent a clear identification of skull fracture etiology. A 3-dimensional reconstruction based on preoperative computed tomography (CT) scans, giving a picture of the injuries before surgical intervention, can help the forensic examiner in identifying skull fracture origin and the means of production.We report the case of a 41-year-old-man presenting at the emergency department with a depressed skull fracture at the vertex and bilateral subdural hemorrhage. The patient underwent 2 neurosurgical interventions (craniotomy and craniectomy) but died after 40 days of hospitalization in an intensive care unit. At autopsy, the absence of various bone fragments did not allow us to establish if the skull had been stricken by a blunt object or had hit the ground with high kinetic energy. To analyze bone injuries before craniectomy, a 3-dimensional CT reconstruction based on preoperative scans was performed. A comparative analysis between autoptic and radiological data allowed us to differentiate surgical from traumatic injuries. Moreover, based on the shape and size of the depressed skull fracture (measured from the CT reformations), we inferred that the man had been stricken by a cylindric blunt object with a diameter of about 3 cm.     

多层螺旋CT诊断颅底骨折及其法医学应用价值

目的 比较多层螺旋CT三种重建方法在显示颅底骨折方面的差异,探讨其在法医学鉴定中的应用价值。方法 对40例颅脑外伤后怀疑颅底骨折的伤者进行多层螺旋CT扫描,然后将容积数据输入工作站进行横断面重建、多平面重建(MPR)和三维重建,三维重建采用表面显示法(SSD)。结果 24例颅前窝骨折,其中横断面显示骨折9例,MPR显示骨折24例,SSD显示9例;3组比较有显著性差异(P<0.001)。24例颅中窝骨折,横断面显示骨折15例,MPR显示骨折24例,SSD显示骨折4例;3组比较有显著性差异(P<0.001)。横断面重建和MPR均显示颅后窝骨折3例,两者无明显差异,SSD有1例显示。结论 SSD成像直观立体地显示了骨折的形态、走行、空间位置等情况,但对细小骨折显示不佳;多层螺旋CT检查可用于颅底骨折的法医学鉴定。     

Categories of variability in the thickness of human skull bones

Problems in standardization of the thickness of skull vault bones at certain strictly determined points are discussed. Race, ethnic, regional, and sex-associated variability of this criterion was studied on extensive material for many peoples of the world (1261 men, 549 women, and 570 men + women). The most significant differences are characteristic only for the male and female totalities. A table of categories of the skull bone thickness has been created, covering 5 intervals with the following incidence: 33% medium, 22% low and high (each), and 11% very low and very high (each). An expert example is offered.     

Forensic-medical significance of the characteristics of gunshot perforating fractures of the skull bones

The study was made of gunshot perforating fractures of calvarial bones in cases of lethal perforating head wounds in long distance shots from a 9-mm Makarov gun. Morphological characteristics of inlet and outlet perforating fractures and bone fragments were found to differ. Gunshot fractures in calvarial bones inflicted by bullets from a 9-mm Makarov gun were studied in experiments with different kinetic energy. In low kinetic energy, bullets make oval holes on the outer table of the skull and round holes on the inner table with radial prominences on the walls of bullet channels, large bone fragments; in moderate kinetic energy--make round holes in the outer table and oval on the inner table with skew prominences on the walls of the outlet part of the channels, large and middle-sized flat bone fragments; in high kinetic energy injuries on both tables were round, prominences were cross, bone fragments were flat, small and middle-sized.     

Forensic medical assessment of the skull bone fractures owing to blow impacts depending on anatomical characteristics and a nature of a trauma-causing objects

Fractures in bones of the skull base (BSB) are preconditioned by the contact zone of interaction between the two below surfaces, i.e. the trace-forming one (object) and the trace-receiving one (bone). On the basis of their independent research, the authors suggest a set of criteria for the expert evaluation of fractures in BSB for the purpose of specifying the properties of the trauma-causing object, which is made with due regard for the anatomic specific features of the trauma zone.     

Forensic medical expert evaluation of gunshot injuries of brain skull

Forensic medical experts are offered a set of morphological signs which help identify the gunshot origin of a skull injury, identify which of the injuries is the inlet and which is the outlet, specify the direction of the shot and succession of formation of injuries in cases with several shots. The author suggests evaluating a gunshot wound in the head with due consideration for the mechanisms of its formation. From a complex of signs of a gunshot injury to the brain skull he singles out the tissue defect with a conical channel and the edge of bone defect, additional injury to the external compact plate near the inlet, and type, number, and location of the radial and concentric cracks. Analysis of the morphology of the above listed signs of gunshot injuries to the skull notable extends the potentialities of forensic medical expert evaluation in cases with gunshot injuries.     

A homicide in the Ukraine: DNA-based identification of a boiled, skeletonized, and varnished human skull, and of bone fragments found in a fireplace.

In an apartment, bone fragments were found in a fireplace. Furthermore, a varnished skull was found elsewhere in the same apartment. The tenant confessed to a murder and stated that the head of a victim, a girl, was boiled for 12 hours. He stated that the soft tissue was then removed and the skull was varnished. Other parts of the body were burned to ashes in an open field. Comparison of loci D19S252, CD4, CYAR04, TII01, F13A01, F13B, and D6S366 from the skull and the bone remains to loci of the mother of a missing girl showed that the skull came from that missing child. Biological maternity was calculated as 99.99%. The bone pieces were DNA typed as male and did not share alleles with the mother in several systems. Therefore, they belonged to a different (human) victim.     

Criteria of personal identification by the hyoid bone

We studied 16 sizes of the hyoid bone (HB) from 158 corpses of known gender, Russians, who had died at the age over 15 years by the K. Miller et al program (1998) and 205 back projection electroroentgenograms of the neck of patients of the traumatological hospital in the town of Kirov. HB skeletization was made by the enzymatic drug enzyme. SPSS package and multidimentional statistics (regression and discriminant analyses) were used for data processing. It was established that HB is an informative object of forensic medical personal identification allowing determination of the body length and gender as well as anatomical, x-ray and osteometric individual features. Precision of human body length diagnosis by HB is 6.71-7.26 cm. Therefore, this method should be used in combination with the diagnosis by long tubular bones. Diagnosis of human gender by osteometric signs of HB based on one-dimentional discriminant analysis is feasible in 80-85%, based on canonical discriminant analysis--in 91.1% cases. The method of anatomic, osteometric and roentgenological assessment of HB individuality can be used in personal identification by intravital x-ray of cervical organs and in traumatic defects of HB. The methods may be applied in forensic medical practice in expert examination of body fragments or isolated bone fragments.     

Healed Depressed Parasagittal Skull Fractures—A Feature of Archaic Australian Aboriginal Remains

The skeletal remains of eight Australian Aboriginals with healed depressed skull fractures were examined. Male:female ratio 5:3; age range 20‐60 yrs. Burial dates by ¹⁴C dating in three cases were 500 years BP (n = 2) and 1300 BP. There were 13 healed depressed skull fractures manifested by shallow indentations of cortical bone and thinning of diploe, with no significant disturbance of the inner skull tables. Nine (69%) were located within 35 mm of the sagittal suture/midline. These lesions represent another acquired feature that might be helpful in suggesting that a skull is from a tribal Aboriginal individual and may be particularly useful if the remains are represented by only fragments of calvarium. While obviously not a finding specific to this population, these healed injuries would be consistent with the possible results of certain types of conflict behavior reported in traditional Aboriginal groups that involved formalized inflicted blunt head trauma.     

The death of Adolf Hitler--forensic aspects

The death of Adolf Hitler is one of the unsolved mysteries of the twentieth century. Numerous historians and journalists have attempted to piece together the details, but despite the interest in the forensic literature regarding the identification of the body, there has not been much scientific debate about the alleged cause of death--cyanide poisoning, gunshot injury, or both. The available literature concerning Hitler's cause of death is incomplete because the toxicological analysis has not been performed and because the skull bone fragment with a gunshot wound possibly from Hitler's corpse has not been properly examined. This has given basis for various theories, which are reviewed. We believe that mtDNA analysis of the skull fragments and of Hitler's jaw, now filed in Moscow, and samples from maternal relatives of Hitler are crucial linking the skull fragment with the gunshot wound to Hitler.     

Bones, blood, pellets, glass, and no body.

A man was found guilty of killing his wife, although her body was never found. The case centered on her car, which contained fragments of bone, glass, shotgun pellets, and dried blood. Deoxyribonucleic acid (DNA) fingerprinting techniques were used to establish the decedent's identity. Examination of the bone fragments revealed that they were from the skull. These two pieces of information, added to other evidence, proved that the defendant's wife had received a fatal injury in her car, and a guilty verdict was rendered.     

Discriminant function sexing of the calcaneus of the South African whites

The skull and some postcranial elements, such as the humerus, femur, and tibia, have been used in their intact states for sex determination in forensic and archaeological cases. But, in practice, these bones are often recovered in fragmented states, which render them unsuitable for use in sex determination. The calcaneus is a compact bone that is able to withstand high tensile forces. Some of its parameters have been used for sex determination in American whites and blacks (1) and Italians (2). This bone has not been used for sex determination in the South African white population. Therefore, the aim of this study was to assess the degree of sexual dimorphism of the calcaneus of the South African white population sample, derive discriminant function score equations for use in sex determination, and determine the level of accuracy of its sex-determining ability. Nine parameters were measured on each pair of 53 male and 60 female calcanei of known South African white skeletons, obtained by a random sampling technique from the Raymond A. Dart Collection of Human Skeletons, School of Anatomical Sciences, University of the Witwatersrand, Johannesburg. Basic statistic and discriminant function analysis was performed on the acquired data. The basic statistics showed that all measured parameters were sexually dimorphic. Discriminant function score equations were generated for use in sex determination. The average accuracy of sex classification ranged from 73 to 86% for the univariate method, 81 to 91% for the stepwise method, and 82 to 92% for the direct method. It is concluded that the calcaneus is useful for sex determination in the South African white population.