8种方法显现的汗潜指印STR分型研究

目的研究常见指印显现方法对指印STR检验的影响。方法采用Invisorb spin forensic试剂盒提取纯化人汗潜指印DNA,低拷贝模板(LCN)STR复合扩增,荧光电泳检验。结果用铜粉、铝粉、荧光粉、黑磁粉、"502"胶、茚三酮、磺酸双三嗪荧光显色液显现的玻片、纸张和胶带纸粘面上的汗潜指印可成功进行STR分型。结论常见指印显现方法不影响指印STR检验。     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.     

Characterization of children's latent fingerprint residues by infrared microspectroscopy: forensic implications

The chemistry of children's latent fingerprint residues was investigated as a function of time and temperature by non-destructive spectrochemical analysis. Latent fingerprints from children, ranging in age from 2 to 11 years, were deposited onto aluminum-coated glass slides and were analyzed by Fourier-Transform Infrared Microspectroscopy. The results revealed that there are three major classes of compounds present in children's latent fingerprints: carboxylic acid salts, proteins, and esters. By studying the changes in the fingerprint residues as a function of time and at elevated temperatures, we discovered that the salts in the fingerprint residues are stable relative to the esters. These findings have relevant forensic implications; by targeting the acid salts instead of the esters or proteins, children's latent fingerprints may be recovered after extended periods of time have elapsed.     

Diimide-enhanced fingerprint detection with photoluminescent CdS/dendrimer nanocomposites

The chemical development of latent fingerprints by nanocomposites that involve photoluminescent cadmium sulfide nanoparticle aggregates with Starburst dendrimer is demonstrated. The dendrimer bonds to fingerprint residue via its terminal functional groups. When these are amino groups (generation 4 dendrimer), the binding is enhanced by fingerprint pre-treatment with diimide. The diimide converts carboxylic acid moieties of the fingerprint residue to esters that then react with the dendrimer amino groups to form amide linkages. The cadmium sulfide/generation 4 dendrimer development of fingerprints is enhanced by elevated temperature also. Finally, fingerprint development with carboxylate-functionalized cadmium sulfide/generation 3.5 dendrimer nanocomposites is examined. Here, diimide treatment of the dendrimer itself aids the subsequent fingerprint labeling, which involves amino acid of the figerprint residue. Nanocomposite fingerprint detection is compatible with time-resolved imaging for background fluorescence elimination.     

指印生物遗传标记检验的研究现状与展望

综述了血指印和汗潜指印生物遗传标记的研究历史和现状,指印DNA检验面临的问题,包括现场污染,显现剂的影响,载体的影响等,并对指印DNA在法医学中的应用前景进行了展望。     

Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400–700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.     

Role of Nanomaterials for Forensic Investigation and Latent Fingerprinting—A Review

The imminent nanotechnology and progressive instrumentations together have vast applications in the field of forensic science. Few prominent examples are gold nanoparticles for improvising the efficiency of polymerase chain reaction and atomic force microscopy for examining ink and bloodstains. Characteristics like distinct ridge details of fingerprints could be obtained by applying different nanoparticles such as silver, zinc oxide, silicon dioxide, aluminum oxide, gold (with silver physical developer), europium, fluorescent carbon, and amphiphilic silica on a range of object surfaces, and among all, gold is most commonly used. Fingerprint is considered noteworthy evidence in any crime scene, and nano-based techniques hold immense future potential in fingerprint investigations. Therefore, this paper focuses on the applications of nanoparticles in developing and detecting the latent fingerprints.     

半导体纳米材料显现潜在手印技术的研究新进展

自纳米技术引入到法庭科学领域以来,因其独特的优势,拓宽了手印技术工作人员的思路,受到了国内外法庭科学家的青睐,成为当前国内外手印学科学家研究的热点。本文主要介绍了半导体纳米材料显现手印的概念特点,并就半导体纳米材料显现手印技术的发展历程和最新进展作了较为详细的归纳和总结。     

Understanding the chemistry of the development of latent fingerprints by superglue fuming

Cyanoacrylate fuming is a widely used forensic tool for the development of latent fingerprints, however the mechanistic details of the reaction between the fingerprint residue and the cyanoacrylate vapor are not well understood. Here the polymerization of ethyl-cyanoacrylate vapor by sodium lactate or alanine solutions, two of the major components in fingerprint residue, has been examined by monitoring the time dependence of the mass uptake and resultant polymer molecular weight characteristics. This data provides insight into the molecular level actions in the efficient development of latent fingerprints by superglue fuming. The results show that the carboxylate moiety is the primary initiator of the polymerization process and that a basic environment inhibits chain termination while an acidic environment promotes it. The results also indicate that water cannot be the primary initiator in this forensic technique.     

Lip print enhancement: review

Lip print(LP)evidence can be an essential tool for human forensics.LPs have conventionally been developed using substances such as lysochrome dyes,fluorescent dyes,indigo dye,aluminium powder,and silver metallic powder.However,techniques for LP enhancement from various substrates are currently inconsistent and lack standardisation in practice.This review summarises current knowledge on the physical and chemical techniques of LP enhancement,identifies limitations,and provides suggestions for future research on practical applications of cheiloscopy as a forensic tool in criminal justice.     

指印检验新方面

100多年来指印鉴定一直是犯罪侦查最有效的个体识别手段,在物证鉴定领域占据重要地位,上世纪80~90年代指印检验技术研究的重要进步更是使指印物证技术应用达到一个新的水平。最近几年指印技术研究又取得许多新进展和突破,特别是在指印显现技术和指印纹线物质成分分析方面开创了新方法和新方向,形成指印物证应用新体系,但同时在指印鉴定结论可靠性方面也出现新争议。     

Visualization of Latent Fingerprint Corrosion on a Discharged Brass Shell Casing

Abstract:  Latent fingerprint visualization on discharged shell casings can provide good forensic evidence, particularly if the casing is recovered at the scene of a crime where a firearm has been discharged. Unfortunately, visualization of such latent fingerprints when they were deposited prior to discharge of the firearm is problematic as both increased temperature and abrasive friction can inhibit fingerprint visualization with conventional techniques. We present a case study that demonstrates latent fingerprint visualization on a discharged shell casing recovered 14 years ago from the scene of a homicide. Previous cyanoacrylate fuming of the casing had failed to reveal any fingerprints. We use a visualization technique in which a conducting carbon powder adheres preferentially to latent fingerprint corrosion of the casing surface, following the application of a potential of 2.5 kV to the casing. This technique presents opportunities for the review of old cases and for consideration of its use in current cases.     

A novel chitosan/tripolyphosphate/L‐lysine conjugates for latent fingerprints detection and enhancement

Most chemical and physical methods employed in visualizing latent marks have shown detrimental effects on human health and, therefore, some research groups have directed their attention to the utilization of various (bio)polymers with the aforementioned purpose. Although chitosan is widely used in medicine, pharmacy, food, and drug delivery systems, there are very few studies that address this biopolymer utilization in forensic applications, such as the detection of latent fingerprints. We used chitosan crosslinked with sodium tripolyphosphate and conjugated with L‐lysine to enhance the visualization of latent fingerprints, due to its ability to interact with fingerprint sweat residues. These conjugates were prepared using different (w/w) amounts of chitosan and tripolyphosphate (6/1; 4/1; 1/1; 1/4; and 1/6), and those with the most promising results (i.e., 6/1 formulation) were investigated in detail. Fourier transform infrared (FT‐IR) spectroscopy confirmed interactions between components of the systems. Optical microscopy and scanning electron microscope (SEM) analysis showed that prepared powder formulations were uniform in size and confirmed that chitosan/tripolyphosphate/lysine conjugates bind easily to the sweat and lipid residues present in the latent fingerprints. The testing of prepared conjugates demonstrated the potential of these systems as bio‐based powder substitution for commercially available powders.     

3种提取胶带粘面汗潜指印中DNA的方法比较

目的比较胶带粘面汗潜指印中DNA提取的方法。方法分别采用硅珠法、QIAMicrokit法、硅珠-QIAMicrokit法提取胶带粘面的汗潜指印中DNA,STR复合扩增,荧光电泳检测。结果用QIAMicrokit法、硅珠-QIAMicrokit法提取胶带粘面汗潜指印中DNA,检测成功率分别为21%和36%。硅珠法检测未获成功。结论硅珠-QIAMicrokit法提取胶带粘面汗潜指印中的DNA比QIAMicrokit法,检验时间更短,检测成功率更高。     

Fluorescence of a Natural Fluorophore as a Key to Improve Fingerprint Contrast Image

The optical and morphological properties of resveratrol were investigated. This nontoxic fluorescent natural material, emitting in the visible blue light, was used as an optical marker, enabling the enhancement of the image contrast coming from relief pictures marked on challenging surfaces. By applying appropriated imaging softwares, this marker was verified to be very useful in the latent fingerprint recognition deposited on different wood surface types, mainly those with high level of roughness, where conventional forensic materials do not allow effective fingerprint image visualization.     

Visualization of latent fingerprint corrosion of metallic surfaces

Abstract:  Chemical reactions between latent fingerprints and a variety of metal surfaces are investigated by heating the metal up to temperatures of ∼600°C after deposition of the fingerprint. Ionic salts present in the fingerprint residue corrode the metal surface to produce an image of the fingerprint that is both durable and resistant to cleaning of the metal. The degree of fingerprint enhancement appears independent of the elapsed time between deposition and heating but is very dependent on both the composition of the metal and the level of salt secretion by the fingerprint donor. Results are presented that show practical applications for the enhancement to fingerprints deposited in arson crime scenes, contaminated by spray painting, or deposited on brass cartridge cases prior to discharge. The corrosion of the metal surface is further exploited by the demonstration of a novel technique for fingerprint enhancement based on the electrostatic charging of the metal and then the preferential adherence of a metallic powder to the corroded part of the metal surface.     

The effect of metal salt treatment on the photoluminescence of DFO-treated fingerprints

Ninhydrin developed fingerprints can be enhanced by treatment with a zinc or cadmium salt. The resulting fingerprint luminescence has been attributed to the induced coplanarity of the bicyclic indanedione rings of Ruhemann's purple due to complexation with the metal ions. This paper explores whether this effect also occurs in the 1,8-diaza-9-fluorenone (DFO)-amino acid adduct (1), formed from the reaction of DFO with amino acids. Molecular modeling studies of (1) indicate a relatively small out-of-plane angle of 24 degrees. 1H NMR studies indicate (1) is asymmetric about the C2 axis in contrast to what has been previously reported. Little, if any, enhancement of luminescence was observed with Zn, Cd, Ru or Eu treated DFO developed latent fingerprints. This lack of enhancement was also borne out by solution luminescence studies. Given this lack of enhancement of luminescence, solutions of (1) and the four metal ions above were analyzed by electrospray mass spectrometry (ESMS). This indicated the formation of predominantly 1:1 complexes of (1) with both Zn and Cd, and the 2:1 complex with ruthenium. No evidence of a Eu complex was found by ESMS.     

Effects of storage time on DNA profiling success from archived latent fingerprint samples using an optimised workflow

Due to recent improvements in forensic DNA testing kit sensitivity,there has been an increased demand in the criminal justice community to revisit past convictions or cold cases.Some of these cases have little biological evidence other than touch DNA in the form of archived latent fingerprint lift cards.In this study,a previously developed optimised workflow for this sample type was tested on aged fingerprints to determine if improved short tandem repeat(STR)profiles could be obtained.Two-year-old samples processed with the optimised workflow produced an average of approximately five more STR alleles per profile over the traditional method.The optimised workflow also produced detectable alleles in samples aged out to 28 years.Of the methods tested,the optimised workflow resulted in the most informative profiles from evidence samples more representative of the forensic need.This workflow is recommended for use with archived latent fingerprint samples,regardless of the archival time.     

A scanning beam time-resolved imaging system for fingerprint detection

A highly sensitive confocal scanning-beam system for time-resolved imaging of fingerprints is described. Time-resolved imaging is a relatively new forensic procedure for the detection and imaging of latent fingerprints on fluorescent substrates such as paper, cardboard, and fluorescent paint. Ordinary fluorescent imaging of latent fingerprints on these surfaces results in poor contrast. Instead, the specimens are treated with a phosphorescent dye that preferentially adheres to the fingerprint which allows time-resolved discrimination between the fingerprint phosphorescence and the background fluorescence. Time resolved images are obtained by synchronizing the digital sampling of the specimen luminescence with the on-off cycle of the chopped illumination beam. The merit of this technique is illustrated with high contrast images of fingerprints obtained from the fluorescent painted surface of a Coke can.     

Faux Blood Fingermark on Pistol: Latent Fingerprint Developed by Whole Blood

We present a case of a faux blood fingermark, wherein a natural latent fingerprint on the pistol at the crime scene was enhanced by the whole blood of the victim. A male was shot to death. The crime scene investigator did not find any blood fingermark during the collection of evidence, but a blood fingerprint was noticed in the firearms examination. We identified that the fingerprint was of the victim; a series of experiments on the nonporous substrate were then conducted; the death in this case was classified as a suicide. The phenomenon is interesting, and thus, calls for attention of the forensic community.