Pronasale Position: An Appraisal of Two Recently Proposed Methods for Predicting Nasal Projection in Facial Reconstruction

This study examines two recently proposed methods for predicting nose projection from the skull, those developed by Stephan et al. (Am J Phys Anthropol 122, 2003, 240) and Rynn et al. (Forensic Sci Med Pathol 6, 2010, 20). A sample of 86 lateral head cephalograms of adult subjects from Central Europe was measured, and the actual and predicted dimensions were compared. Regarding nose projection (the anterior and vertical position of the pronasale), in general, the method of Rynn et al. (Forensic Sci Med Pathol 6, 2010, 20) was found to perform better and with less error variance than the method of Stephan et al. (Am J Phys Anthropol 122, 2003, 240), but the mean difference between the actual and predicted values did not exceed 2.2 mm (6.5% of the actual dimension) in most of the variables tested. The vertical dimensions of the nose were predictable with greater accuracy than the horizontal dimensions. Although the mean error of both methods is not great in practice and thus both methods could be considered to be “accurate,” the real variance of error should not be overlooked.     

Eyeball Position in Facial Approximation: Accuracy of Methods for Predicting Globe Positioning in Lateral View

This study measured the accuracy of traditional and validated newly proposed methods for globe positioning in lateral view. Eighty lateral head cephalograms of adult subjects from Central Europe were taken, and the actual and predicted dimensions were compared. The anteroposterior eyeball position was estimated as the most accurate method based on the proportion of the orbital height (SEE = 1.9 mm) and was followed by the “tangent to the iris method” showing SEE = 2.4 mm. The traditional “tangent to the cornea method” underestimated the eyeball projection by SEE = 5.8 mm. Concerning the superoinferior eyeball position, the results showed a deviation from a central to a more superior position by 0.3 mm, on average, and the traditional method of central positioning of the globe could not be rejected as inaccurate (SEE = 0.3 mm). Based on regression analyzes or proportionality of the orbital height, the SEE = 2.1 mm.     

Further Evidence on the Anatomical Placement of the Human Eyeball for Facial Approximation and Craniofacial Superimposition*

Abstract: Recently a small sampled cadaver study (n = 4) suggested that the human eyeballs are placed closer to the orbital roof and lateral orbital wall as first reported in the anatomical literature many years previously. This contrasts with central positioning of the eyeball within the orbit as advocated by the facial approximation literature. Given the limits of such small samples, this study re-examined globe position in nine new cadavers to help clarify which relationship is accurate. The results essentially confirm prior empirical findings except that the mean lateral divergences from the orbit center were found to be larger—the eyeball was found to be “displaced” 1.4 mm superiorly and 2.4 mm laterally. Medians calculated across all 13 cadavers from this study and the above-mentioned recent report refine these measurements to 1.4 and 2.3 mm respectively. Globe projection values were identical to those observed for living individuals (c. 16 mm).     

An Improved Version of a Tool Mark Comparison Algorithm

Chumbley et al. (2010) described a statistically based algorithm for comparing pairs of tool marks. They presented empirical evidence that the algorithm produces well‐separated similarity score values for “matching” and “non‐matching” pairs of tool marks. However, the algorithm has two substantial weaknesses. First, it is “uncalibrated” in the sense that error rates can be determined only through empirical investigation. Second, it relies on a randomized test and can lead to different similarity scores when the algorithm is repeatedly applied to the same pair of tool marks. We present an improved version of the procedure, which eliminates the randomized scores and yields more consistent and predictable error rate control. This is accomplished by replacement of a random sampling step from the original algorithm with a deterministic process. We demonstrate the improved algorithm and compare its performance to the original by applying to known “matching” and “non‐matching” pairs of tool marks.     

Postmortem Computed Tomography Findings of Upper Airway Obstruction by Food

Abstract: This study is a retrospective analysis of 14 cases with food bolus upper airway obstruction as the defined cause of death where both postmortem computed tomography and autopsy were performed. Three groups were defined by the images i.e., Type 1: foreign body situated between the oral cavity and oropharynx, while the epiglottis sits in normal position, Type 2: foreign body situated in the oropharynx just above the epiglottis pushing it posteriorly and obstructing the airway, and Type 3: foreign body obstructing the laryngeal inlet while pushing the epiglottis anteriorly. At the time of autopsy, foreign bodies were detected by pathologists, occasionally in a different position, presumably being dislodged in the act of organ removal especially for the “Type 1” pattern. CT imaging provides accurate interrogation of upper airway bolus obstruction prior to autopsy.     

Accuracy of 3D Scanners in Tooth Mark Analysis

The objective of this study was to compare the accuracy of contact and laser 3D scanners in tooth mark analysis. Ten dental casts were scanned with both 3D scanners. Seven linear measurements were made from the 3D images of dental casts and biting edges generated with DentalPrint© software (University of Granada, Granada, Spain). The uncertainty value for contact 3D scanning was 0.833 for the upper dental cast and 0.660 mm for the lower cast; similar uncertainty values were found for 3D-laser scanning. Slightly higher uncertainty values were obtained for the 3D biting edges generated. The uncertainty values for single measurements ranged from 0.1 to 0.3 mm with the exception of the intercanine distance, in which higher values were obtained. Knowledge of the error rate in the 3D scanning of dental casts and biting edges is especially relevant to be applied in practical forensic cases.     

Application of Enhanced Point Estimators to a Sample of In Vivo CT‐derived Facial Soft Tissue Thicknesses

Facial approximations based on facial soft tissue depth measurement tables often utilize the arithmetic mean as a central tendency estimator. Stephan et al. (J Forensic Sci 2013;58:1439) suggest that the shorth and 75‐shormax statistics are better suited to describe the central tendency of non‐normal soft tissue depth data, while also accommodating normal distributions. The shorth, 75‐shormax, arithmetic mean, and other central tendency estimators were evaluated using a CT ‐derived facial soft tissue depth dataset. Differences between arithmetic mean and shorth mean for the tissue depths examined ranged from 0 mm to +2.3 mm (average 0.6 mm). Differences between the arithmetic mean plus one standard deviation (to approximate the same data points covered by the 75‐shormax) and 75‐shormax values ranged from ?0.8 mm to +0.7 mm (average 0.2 mm). The results of this research suggest that few practical differences exist across the central tendency point estimators for the evaluated soft tissue depth dataset.     

103名中国汉族唇纹特征分析

本文分析了103名中国汉族人的唇纹特征,其中男性57人,女性46人,年龄范围为22～58岁。按照金子·丑之助提出的分类方法,对中国汉族人的唇纹进行了分类,并进行了统计分析,得出了中国汉族各型唇纹的分类,并且比较了唇纹的性别差异和上下唇之间的差异。中国人唇纹的类型男性以Ⅲ型为高,女性以Ⅰ型为高。     

Comparison Among Manual Facial Approximations Conducted by Two Methodological Approaches of Face Prediction

This study verified the difference between two methods of forensic facial approximation (FFA) regarding recognition and resemblance rates. Three‐dimensional models of skulls were obtained from computerized tomography (CT) scans of two subjects (targets). Two manual FFAs were performed for each target, by applying two different guidelines for the facial structures (what we called “American method” (AM) and “Combined method” (CM)). Unfamiliar assessors evaluated the sculptures by recognition and resemblance tests. The AM was that which allowed more correct responses of recognition and higher resemblance's scores for the male target (p < 0.001). Regarding guidelines for modeling characteristics of the face, the ones that are practical and easily performed for sculptures, such as the length of the anterior nasal spine multiplied by 3 for nose prediction, may offer better results in terms of resemblance.     

Characteristics and Frequency of Chipping Effects in Near‐Contact Gunshot Wounds

The presence of “chipping” or “flaking” around the edges of gunshot entry wounds has been described among the characteristics of gunshot wounds in bone. In this study, the real frequency of such a peculiar feature was investigated. The presence of “chipping” was assessed on 22 gunshot wounds fired at a near‐contact range on bovine ribs with 9‐mm bullets. As controls, five samples were shot with a 3 cm range, and five from 40 cm. In 77% of cases shot at near‐contact range, a detachment of small fragments of the upper layers of bone was detected, mainly with a circumferential disposition, whereas this feature was lacking in control samples. The study demonstrated the frequency of “chipping” and that it may probably be due to a combined ballistic effect of impact of the bullet itself and expansion of gases. It may be thus considered indicative of close‐range shots.     

Age-related changes in pulp cavity of incisors as a determinant for forensic age identification

To find a simple and convenient method for age identification upon age-related pulp cavity narrowing, the mesiodistal diameters of the cervical pulp chamber, the middle and terminal parts of the root canal of the pulp cavity of 620 incisors were measured on radiographs taken in situ in 80 Chinese aged from 15 to 80. It was shown that the three mesiodistal diameters significantly decreased in a negative linear relationship with age (-0.4233 ≤ r ≥ -0.8465) in all incisors, but the narrowing velocity of the cervical pulp chamber and the middle part of the root canal in the maxillary incisors (b = -0.02 mm) was faster than that in the mandibular incisors (b = -0.01 mm). Accordingly, a mathematical model describing the ages as a function of any one of the three mesiodistal diameters of the pulp cavity was deduced, which would be useful for age identification in forensic medicine or archaeology.     

REALITY IS. . . . A RESPONSE TO MARTINDALE,TIPPINS, BEN‐PORATH,AUSTIN, AND WITTMANN

This article is written as a response to the Martindale et al. critique of the Ackerman and Pritzl (2011) child custody evaluation practices article. The Martindale et al. critique focuses on a small portion of the overall results regarding test usage and suggests that the entire article is “flawed and deficient.” However, their critique engages in confirmatory bias and exaggerated statements and ignores the overall value of the article in general. A more broad‐based explanation of the results is provided herein.     

Three-Dimensional Prediction of the Nose for Facial Approximation in a Thai Population

Most of the previous studies about nose prediction were concentrated only some landmarks of the nose. This study aimed to generate prediction equations for ten landmarks of the nose in the midline and alar regions for forensic facial approximation. The six midline landmarks were the sellion, nasion–pronasale posterior, nasion–pronasale anterior, pronasale, nasal drop, and subnasale. The four landmarks of the alar region were the alare, superior alar groove, posterior alar groove, and inferior alar groove. We used the skull landmarks in the nasal, zygomatic, and maxillary bone to predict the landmarks of the nose. Cone-beam computed tomography scans of 108 Thai subjects with normal BMI and age ranging from 21.0 to 50.9 years were obtained in a sitting position. The data were converted into three-dimensional (3-D) images of the skull and face. The Cartesian coordinates of the landmarks of the skull and nose were used to formulate the multiple regression equations. The formulated equations were tested in 24 new subjects. The mean differences in the predicted midline landmarks varied between −0.4 mm and 0.5 mm, whereas those for bilateral landmarks varied between −1.0 mm and 1.4 mm. In conclusion, the prediction equations formulated here will be beneficial for facial approximation of the nose in a Thai population.     

Accuracy of Identifying Juvenile/Adult Status from Third Molar Development using Prediction Probabilities Derived from Logistic Regression Analysis

The use of third molars in predicting juvenile/adult status (</≥ 18 years) has important legal ramifications. Third molar development was assessed using Köhler's grading on 268 orthopantomograms of Indian subjects. Logistic regression analysis was applied to determine allocation accuracy of juvenile/adult status and the level of probability that is “reliable” in predicting juvenile/adult status. Allocation accuracies ranged between 75.8% and 78.2% for the sexes combined, with minimal male‐female differences. Adults were categorized more accurately than juveniles, suggesting that Köhler's grading puts Indian juveniles at greater risk of unwarranted punishment. In both sexes, juvenile/adult status was “reliably” predicted when the probability was >80% using individual third molars (excepting the lower right third molar in males); combining upper and lower third molars on the left/right sides, “reliable” predictions were possible when the probability was >80% and >90% for females and males, respectively. Overall, “reliable” juvenile/adult status prediction was achieved in c. 36% of subjects.     

An accuracy assessment of forensic computerized facial reconstruction employing cone-beam computed tomography from live subjects

The utilization of 3D computerized systems has allowed more effective procedures for forensic facial reconstruction. Three 3D computerized facial reconstructions were produced using skull models from live adult Korean subjects to assess facial morphology prediction accuracy. The 3D skeletal and facial data were recorded from the subjects in an upright position using a cone-beam CT scanner. Shell-to-shell deviation maps were created using 3D surface comparison software, and the deviation errors between the reconstructed and target faces were measured. Results showed that 54%, 65%, and 77% of the three facial reconstruction surfaces had <2.5 mm of error when compared to the relevant target face. The average error for each reconstruction was -0.46 mm (SD = 2.81) for A, -0.31 mm (SD = 2.40) for B, and -0.49 mm (SD = 2.16) for C. The facial features of the reconstructions demonstrated good levels of accuracy compared to the target faces.     

The cognitive distortions of child molesters are in need of treatment

Abstract

This paper forms the second part of a debate led by Marshall, Marshall, and Kingston (2011) regarding the need to address so-called cognitive distortions in sexual offender treatment. In their paper, Marshall et al. argue that so-called cognitive distortions may not necessarily require intense and focused attention or challenge throughout treatment. In evaluating Marshall et al.'s arguments, we highlight some inherent differences in how both Marshall et al. and ourselves choose to define the term “cognitive distortion”. We surmise that these key definitional differences appear to account for many of the issues that we “debate”. In particular, for example, Marshall et al. focus their arguments regarding cognitive distortions more explicitly upon excuses, denial and minimisations, whereas we choose to focus upon schemas and higher-order belief structures. Thus, we argue that the broadness and vagueness of the term “cognitive distortion” can lend itself to quite different interpretations and research foci. We offer some alternative views to Marshall et al.'s position and advocate the consideration of cognitions with an aetiological role in offending. We conclude with some suggestions for future research and treatment.     

A Procedure for Calculating the Vertical Space Height of the Sacrum When Determining Skeletal Height for Use in the Anatomical Method of Adult Stature Estimation

Estimating stature from skeletonized remains is one of the essential parameters in the development of a biological profile. A new procedure for determining skeletal height (SKH) incorporating the vertical space height (VSH) from the anterior margin of the sacral promontory to the superior margins of the acetabulae for use in the anatomical method of stature estimation is introduced. Regression equations for stature estimation were generated from measurements of 38 American males of European ancestry from the William M. Bass Donated Skeletal Collection. The modification to the procedure results in a SKH that is highly correlated with stature (r = 0.925–0.948). Stature estimates have low standard errors of the estimate ranging from 21.79 to 25.95 mm, biases from to 0.50 to 0.94 mm, and accuracy rates from 17.71 mm to 19.45 mm. The procedure for determining the VSH, which replaces “S1 height” in traditional anatomical method models, is a key improvement to the method.     

Effect of Head Position on Facial Soft Tissue Depth Measurements Obtained Using Computed Tomography

Facial soft tissue depth (FSTD) studies employing clinical computed tomography (CT) data frequently rely on depth measurements from raw 2D orthoslices. However, the position of each patient's head was not standardized in this method, potentially decreasing measurement reliability and accuracy. This study measured FSTDs along the original orthoslice plane and compared these measurements to those standardized by the Frankfurt horizontal (FH). Subadult cranial CT scans (n = 115) were used to measure FSTDs at 18 landmarks. Significant differences were observed between the methods at eight of these landmarks (p < 0.05), demonstrating that high‐quality data are not generated simply by employing modern imaging modalities such as CT. Proper technique is crucial to useful results, and maintaining control over head position during FSTD data collection is important. This is easily and most readily achieved in CT techniques by rotating the head to the FH plane after constructing a 3D rendering of the data.     

Comparability of radiographic and 3D-ultrasound measurements of facial midline tissue depths

As a second step in our three-dimensional (3D) ultrasound research on facial tissues, orthodontic patients with available lateral cephalographs (radiographs) allowing measurements of tissues along the midline of the face were recruited for ultrasound scanning. Comparison of three points on the upper lip (A-point), chin (B-point), and nose (nasion) produced differences of varying magnitude between radiographic and ultrasound measurements, with the B-point measurement being clearly affected by head orientation. Concordance was better for A-point and best for nasion. Although extension of two-dimensional (2D) ultrasound scanning of facial tissues to 3D scanning for forensic and surgical reconstructive purposes remains a worthy goal, it must be recognized that because of the differences in technique, measurements obtained from the different visualization modalities at present vary in their comparability.