"Lateral Angle" of the Internal Auditory Canal: Non-Association with Temporal Bone Pneumatization

Abstract:  The "lateral angle," the angle with which the posterior wall of the internal auditory canal meets the posterior fossa plate, is arguably wider in females (>45°) than males (<45°). Not previously addressed, however, are repeatability of angle determination, and whether the extent of temporal bone pneumatization is a confounder. Forty-one adult human cranial specimens (82 clinically normal temporal bones) were studied; no sex information was available for this United States sample. Two casts were created from each ear; each cast was independently categorized twice. No association of lateral angle with mastoid size was found. Repeatability was good. Although bilateral symmetry was suggested (phi = 0.60, p  = 0.05), two crania had oppositely categorized right-left angles. We observed a new finding: narrowed but clinically normal canals in 10% of crania. The lateral angle is a good candidate to be a morphological method in determination of sex.     

Sex Determination from the Frontal Bone: A Geometric Morphometric Study

Sex estimation in human skeletal remains when using the cranium through traditional methods is a fundamental pillar in human identification; however, it may be possible to incur in a margin of error due because of the state of preservation in incomplete or fragmented remains. The aim of this investigation was sex estimation through the geometric morphometric analysis of the frontal bone. The sample employed 60 lateral radiographs of adult subjects of both sexes (30 males and 30 females), aged between 18 and 40 years, with mean age for males of 28 ± 4 and 30 ± 6 years for females. Thin‐plate splines evidenced strong expansion of the glabellar region in males and contraction in females. No significant differences were found between sexes with respect to size. The findings suggest differences in shape and size in the glabellar region, besides reaffirming the use of geometric morphometrics as a quantitative method in sex estimation.     

Is Dwight Right? Can the Maximum Height of the Scapula Be Used for Accurate Sex Estimation?*

Abstract: This paper presents data from a sample of 803 individuals (308 females and 495 males) from the Hamann‐Todd collection testing Dwight’s century‐old assertion that maximum height of the human scapula can be used for sex estimation—males being larger than 170 mm, females falling below 140 mm. The results of this project show Dwight’s method has high accuracy when scapular height falls either above or below the sex specific demarcation points (96.81%), but a vast majority of both males and females fall in between. The overall accuracy of the method is just 29.27%. By empirically demonstrating the limited usefulness of Dwight’s technique, the author hopes the rote republication of this method in introductory texts on the subject will cease, and draw attention to the need for multiple methods of sex estimation as a response to the overlap in both size and shape between males and females.     

Nonmetric sex determination from the distal and posterior humerus in black and white South Africans

The successful identification of human skeletal remains relies on proven diagnostic techniques for sex determination. This research utilized 608 individuals from South Africa (420 men, 188 women) to conduct a blind nonmetric determination of sex from three features of the distal humerus: olecranon fossa shape, angle of the medial epicondyle, and trochlear extension. A scoring system between males and females was implemented, and the aggregate score of the three features determined the estimated sex of the skeletal element in question. With all features combined, black and white South Africans were categorized successfully as either male or female 75.5% (77% accuracy rate for females, 74% accuracy rate for males). This classification rate is lower than what was found in previous studies, but suggests that characteristics of the distal humerus are still quite valuable when estimating skeletal sex. More research is needed to assess reasons for the differential expression of these traits in different populations and to determine whether the method is nonpopulation specific.     

Three-dimensional modeling of the various volumes of canines to determine age and sex: a preliminary study

Canines are usually used in anthropological and forensic sciences for sex and age determination. The best methods to estimate age are based on secondary dentine apposition, evaluated from periapical X-rays. The aim of this study was to propose a new method of sex and age estimation using 3D models to obtain more precise predictions using tooth volumes. Fifty-eight dental CT scans of patients aged 14-74 with a well-balanced sex ratio composed the sample. One hundred and thirty-three healthy canines were modeled (Mimics 12.0). The sample was divided into a training sample and a validation sample. An age formula was determined using the "pulp volume/tooth volume" ratio. Sex prediction was adjusted with total volumes. Applying the equations to the validation sample, no significant difference was found between the real and predicted ages, and 100% of the sex predictions were correct. This preliminary study gives interesting results, and this method is worth being tested on a larger data sample.     

Assessment of histomorphological features of the sternal end of the fourth rib for age estimation in Koreans

The aim of this study was to assess the histomorphological features of the fourth rib and to develop age-predicting equations for Koreans. Sixty-four rib samples (36 males and 28 females) obtained from forensic cases were used for developing equations. Two thin sections (<100-microm thick) per sample were prepared by manual grinding. Multivariate analysis of covariance revealed statistically significant differences in age-adjusted histomorphological variables between sexes. Using stepwise regression analysis, osteon population density and average osteon area were correlated with unknown sex (r2 = 0.826), and sex plus two histomorphological variables provided the best results for an age-predicting equation given the assumption of knowing the sex of a specimen (r2 = 0.839). Average Haversian canal area had little influence on age estimation for male or female samples, and relative cortical area was not significantly related to age for any specimen.     

Sex determination using nonmetric characteristics of the mandible in Koreans

The mandible is the largest and hardest facial bone and retains its shape better than other bones in the forensic and physical anthropologic field. The mandible can be used to distinguish among ethnic groups and between sexes. We examined the morphological characteristics of the mandibles of 102 Koreans of either sex. Of 13 nonmetric items of the mandible, the characteristic that best allowed the sexes to be distinguished was the contour of the lower border of the mandible: rocker-shaped mandibles predominated in males (68.1%), whereas most females (84.6%) exhibited a straight mandible. In addition, the mental region was shaped differently between the sexes: the shape of the chin in most males was generally bilobate or square (91.7%), whereas the chin in females was either square (45.5%) or pointed (54.5%). In this study, the positive predict values of male and female were 92.5% and 73.7%, respectively. Therefore, the nonmetric method used to analyze the mandible in this study can be used for sex discrimination.     

The Critical Angle for Perforation versus Ricochet of a .38 CAL. LRN Bullet on a Windshield

From forensic point of view, it is important to clarify the condition whether ricochet or perforate for a bullet fired toward the automobile windshield. The purpose of this study was to specify the critical angle at which the ricochet of the fired bullet takes place. To estimate the result of firing, a rigid‐body dynamics simulation of the bullet together with the test‐firing using .38 CAL. LRN bullet was examined. It was found both from numerical simulation and firing test that when the incidence angle is <45°, a complete perforation of the windshield was observed, whereas the bullet ricocheted remaining a characteristic damage on the windshield when the incidence angle is >60°. To measure the static failure resistance of various windshields, static indentation test was also examined.     

Sexual Dimorphism of Maxillary Sinus Dimensions Using Cone‐Beam Computed Tomography

Sex determination of unknown persons plays an important role in forensic medicine. Cone‐beam computed tomography (CBCT) is an excellent imaging modality for accurate measurement of maxillary sinus dimensions. This study aimed to evaluate whether maxillary sinus measurements on CBCT scans can be applied for sex determination. The width, length, and height of maxillary sinuses in CBCT images of 100 patients (50 males and 50 females) were measured. Student's t‐test and discriminant function analysis were used to compare differences in the measured parameters between males and females. The correct predictive accuracy rate of sex determination was 78% in females and 74% in males with overall accuracy of 76%. Based on discriminant analysis, the most pronounced variable in differentiation of sex groups was maxillary sinus height. This study suggests that maxillary sinus measurements can be valuable for sex determination in forensic investigation, especially for cases in which other traditional methods are not applicable.     

An Empirical Study on the Relation Between the Critical Angle for Bullet Ricochet and the Properties of Wood

The properties of a bullet, an object, and the incidence angle determine whether the bullet will penetrate, perforate, or ricochet. In this study, the critical angle for ricochet was established for .32 Auto and 9 mm Luger bullets on Abachi, Southern Yellow Pine, Beech, and Ipe wooden boards. Results show that the critical angle differs depending on caliber and wood type. The critical angle is higher for .32 Auto bullets than for 9 mm Luger bullets and increases with increasing wood density and Janka hardness. The established critical angles for ricochet on the lightest and softest wood (Abachi) are 10.4° and 10.3° for .32 Auto and 9 mm Luger, respectively. For the heaviest and hardest wood (Ipe), the angles were 45.0° and 33.4°, respectively. The combined results on the four tested woods show a strong linear relationship between both the density and the hardness and the critical angle for both calibers.     

活体跟骨数字X线片性别判定

目的应用数字X线摄影方法测量跟骨,评估5项测量指标在法医学性别判定中的价值。方法393例受试对象随机分组,实验组334例(男性148例,女性186例),验证组59例(男性26例,女性33例)。每一受试对象按照规定投照方法摄跟骨侧位DR片,分别测量5项跟骨长度指标。方差分析检验实验组各项指标性别间差异,Fisher判别分析及多元逐步判别分析建立性别判别函数。验证组样本数据回代,前瞻性评估判别效能。结果5项指标性别差异有统计学意义(P<0.001)。共建立了6组性别判别函数,性别判断正确率在78.4%～88.9%之间;回代检验,判断正确率在79.7%～86.4%之间。结论跟骨侧位数字X线片5项长度测量指标代入判别函数进行性别判定的方法可为法医学个人识别中的性别判定提供帮助。     

Improving Sex Estimation from Crania Using a Novel Three‐dimensional Quantitative Method,,

This study utilizes an innovative 3D approach to discover metric variables that obtain the highest classification rates for sex estimation from the cranium. Models were constructed from 222 cranial CT scans of U.S. Whites from the Bass Donated Collection. These models were used to create a statistical bone atlas that captures the primary shape variation in the skull and facilitates rapid computer‐automated analyses. The bone atlas showed that important size‐related sex variables are bizygomatic breadth, maximum cranial length, cranial base length, and mastoid height. Shape‐related variables capture sex differences in the projection of the glabellar region, inclination of the frontal, and cranial base flexion. In addition, vault thickness is highly dimorphic, with females having on average thicker vaults in the frontal region, and males having thicker vaults in the occipital region. Cross‐validated linear discriminant analysis obtained >95% accuracy (97.5% with 11 variables and 95.5% with eight variables).     

根据成人的耻骨缘枝角和耻骨联合部宽高指数鉴定性别

笔者测量了100副(男、女各50副)成人耻骨缘枝角的角度和耻骨联合部宽高的指数,其男女均数差异极为显著。从总体上看,耻骨缘枝角男性大于女性,耻骨联合部宽高的指数男性小于女性。提出前者的性别判别值为137.0°,后者的性别判别值为62.2。估算其正确率分别可达97.7％和81.6％。     

Forensic Age Estimation Using Thin‐Slice Multidetector CT of the Clavicular Epiphyses Among Adolescent Western Chinese

Reaching the age of 18 years is the most significant step for criminal proceedings in China. In this study, a population of 752 individuals was recruited to clarify how strong the chronological age relates to clavicular ossification status revealed by CT scans with 1 mm slice thickness in the West China Han population. Finally, the epiphysis was observed to commence fusion in females at 16.28 years and 16.74 years in males and be fully ossified by 25.97 years in females and 25.81 years in males. These findings suggested that ossification of medial clavicular epiphyseal cartilage can be used in age estimation for West China Han population with the age threshold of 18 years. By comparison with previous German studies, our results suggested that the pace of ossification of medial clavicular epiphyseal cartilage may be potentially affected by socioeconomic status.     

西南地区成人面颅骨的性别判定

目的建立适合西南地区成人的颅骨性别判定函数。方法性别明确的颅骨67个,测量颅骨最大长、颅骨最大宽、颅高等16项指标,所得数据进行统计学分析,建立单一变量及多变量性别判定方程,并对5个无名颅骨进行回带检验。结果 16项指标中有13项存在显著的性别差异,男性大于女性,单变量函数推断性别以鼻高(男78.4%,女83.3%)、颅骨最大长(男83.8%,女73.3%)准确率较高。多变量性别判定函数以颅周长、鼻高贡献最大,判定准确率男89.2%,女90.0%。结论单变量推断颅骨性别以鼻高或颅骨最大长较为理想,但以颅周长、鼻高联合推断性别准确率更高。     

Quantification of Pubic Symphysis Metamorphosis Based on the Analysis of Clinical MDCT Scans in a Contemporary Malaysian Population

Forensic age estimation methods are biased to sex and population; in general, accuracy is reduced when applied to foreign populations. This study assessed the accuracy of the Suchey–Brooks method in contemporary Malaysian individuals and aimed to formulate population‐specific standards. Multi‐detector computed tomography scans of 355 individuals (165 male; 190 female) of 15–83 years of age were reconstructed using 3D‐volumetric rendering in RadiAnt. Pubic symphyseal phase, bias, inaccuracy, and percentage correct age classifications are examined. Transition analysis was used to develop age estimation standards. High observer agreement (κ = 0.763–0.832) and a positive relationship between age and pubic symphyseal phase (r = 0.884–0.90) were demonstrated. Mean inaccuracies were 8.62 and 8.95 years for males and females, respectively; overall correct classification was 97.8%. Transition ages between phases in males were 18.79, 23.29, 28.85, 43.64, and 61.15 years; in females, the corresponding data were 19.77, 22.53, 32.62, 41.85, and 57.39 years.     

Mastoid Triangle for Sex Determination in Adult Nigerian Population: A Validation Study

In the quest for a simple, reliable technique to estimate the sex of human remains several novel metric skeletal indices have been reported. Only a few have been examined for utility in populations different from those in which they were developed. In this study, the mastoid process was evaluated for sex determination using 102 lateral cephalograms of a Nigerian sample of known age and sex. The asterion‐mastoidale distance and mastoid triangular area were sexually dimorphic with mean values higher in males compared with females (p = 0.02). On analysis of the discriminant function, overall accuracy for sex classification was 55%. On cross‐validation, the triangular area accurately identified 80% of females and 48% of males. The asterion‐mastoidale distance was slightly more accurate at sexing the sample. The practical utility of the mastoid triangle area technique to differentiate sex in Nigerian populations is not supported by the results of this study.     

Fingerprint Ridge Density as a Potential Forensic Anthropological Tool for Sex Identification

In cases of partial or poor print recovery and lack of database/suspect print, fingerprint evidence is generally neglected. In light of such constraints, this study was designed to examine whether ridge density can aid in narrowing down the investigation for sex identification. The study was conducted on the right‐hand index digit of 245 males and 246 females belonging to the Punjabis of Delhi region. Five ridge density count areas, namely upper radial, radial, ulnar, upper ulnar, and proximal, were selected and designated. Probability of sex origin was calculated, and stepwise discriminant function analysis was performed to determine the discriminating ability of the selected areas. Females were observed with a significantly higher ridge density than males in all the five areas. Discriminant function analysis and logistic regression exhibited 96.8% and 97.4% accuracy, respectively, in sex identification. Hence, fingerprint ridge density is a potential tool for sex identification, even from partial prints.     

Measurements of the Foramen Magnum and Mandible in Relation to Sex Using CBCT

The purpose of this study was to evaluate pre‐existing CBCT images of a large sample of adult females and males to provide data on foramen magnum and mandibular measures of sexual dimorphism for use as a reference sample in cases of establishing identity in unknown fragmentary skulls. The study group consisted of 161 adult patients. 3D images of the patients were assessed retrospectively. FM measurements were obtained from reformatted axial sections. Six mandibular measurements were taken. According to the results, the study identified four mandibular measurements as final predictors of sex which are as follows: the gonial angle (G‐angle) and ramus length (Ramus‐L), gonion–gnathion length (G–G‐L) and bigonial breadth (BG‐Br). It was found that the cross‐validated grouped overall predictive accuracy was 83.2% for FM and mandible measurements. It could correctly identify males in 77.3% and females in 87.4% of the cases. To assess sexual dimorphism, the gonial angle and ramus, gonion–gnathion lengths, and bigonial breadth of the mandible and sagittal diameter of the FM may be used on CBCT images.     

Morphologic patterns of lip prints in a portuguese population: a preliminary analysis

Lip prints are thought to have the ability to distinguish individuals and, hence, have a potential use in human identification purposes. However, questions remain regarding their utility for sex determination. This study aimed to classify lip prints for different individuals in a Portuguese population and to determine whether sex differences exist. Lip prints of 25 females and 25 males were obtained using dark-colored lipstick and cellophane tape. Lip prints were analyzed using a magnifying lens and classified according to the Suzuki and Tsuchihashi classification. A Type II pattern was found to be most common. A comparison of lip-print patterns between males and females showed results with a statistically significant difference: Type III pattern was most common in males, and a Type II pattern in females. This study corroborates the hypothesis that lip prints are able to distinguish individuals and may be useful in sex determination.