Reconstruction of Deformed Bite Marks Using Affine Transformations

Abstract: Bite marks inflicted on animate and inanimate objects will undergo a certain degree of deformation. This fact remains one of the biggest stumbling blocks when analyzing evidence for court presentation. It has been demonstrated that the reliability of pattern association analysis will not be affected by minimal degrees of warping, shrinkage, and distortion. In this study, affine transformations were applied to bite marks to establish if minimal distortions would affect the mathematically determined relationships of the defined features. In a real case study, it was then tested whether the distorted bite mark matched the dentition of the perpetrator by applying an affine transformation. This was confirmed to be the case. Affine transformations will thus not affect the relationships of the individual features found in bite marks. The numerical calculations validate the reliability of pattern association analysis in the presence of minimal amounts of warping, shrinkage, and distortion.     

An integrated technique for the analysis of skin bite marks

The high number of murder, rape, and child abuse cases in South Africa has led to increased numbers of bite mark cases being heard in high courts. Objective analysis to match perpetrators to bite marks at crime scenes must be able to withstand vigorous cross-examination to be of value in conviction of perpetrators. An analysis technique is described in four stages, namely determination of the mark to be a human bite mark, pattern association analysis, metric analysis and comparison with the population data, and illustrated by a real case study. New and accepted techniques are combined to determine the likelihood ratio of guilt expressed as one of a range of conclusions described in the paper. Each stage of the analysis adds to the confirmation (or rejection) of concordance between the dental features present on the victim and the dentition of the suspect. The results illustrate identification to a high degree of certainty.     

Computer‐aided Dental Identification: An Objective Method for Assessment of Radiographic Image Similarity*

Abstract: A pilot study evaluated a computer‐based method for comparing digital dental images, utilizing a registration algorithm to correct for variations in projection geometry between images prior to a subtraction analysis. A numerical assessment of similarity was generated for pairs of images. Using well‐controlled laboratory settings, the method was evaluated as to its ability to identify the correct specimen with positive results. A subsequent clinical study examined longitudinal radiographic examinations of selected anatomical areas on 47 patients, analyzing the computer‐based method in making the correct identification based upon a threshold level of similarity. The results showed that at a threshold of 0.855, there were two false negative and two false positive identifications out of 957 analyses. Based on these initial findings, 25 dental records having two sets of full mouth series of radiographs were selected. The radiographs were digitized and grouped into six anatomical regions. The more recent set of films served as postmortem images. Each postmortem image was analyzed against all other images within the region. Images were registered to correct for differences in projection geometry prior to analysis. An area of interest was selected to assess image similarity. Analysis of variance was used to determine that there was a significant difference between images from the same individual and those from different individuals. Results showed that the threshold level of concordance will vary with the anatomical region of the mouth examined. This method may provide the most objective and reliable method for postmortem dental identification using intra‐oral images.     

Age estimation by measurements of developing teeth: accuracy of Cameriere's method on a Brazilian sample

Developing teeth are commonly the criteria used for age estimation in children and young adults. The method developed by Cameriere et al. (Int J Legal Med 2006;120:49-52) is based on measures of teeth with open apex, and application of a formula, to estimate chronological age of children. The present study evaluated a sample of panoramic radiographs from Brazilian children from 5 to 15 years of age, to evaluate the accuracy of the method proposed by Cameriere et al. The results has proven the system reliable for age estimation, with a median residual error of -0.014 years between chronological and estimated ages (p = 0.603). There was a slight tendency to overestimate the ages of 5-10 years and underestimate the ages of 11-15 years.     

Antemortem dental records: attitudes and practices of forensic dentists

This study was designed to provide insight concerning the attitudes and practices of forensic dentists regarding antemortem dental records reviewed for purposes of dental identification. Forensic dentists were invited to participate in a 10 item survey. The majority of the respondents reported a considerable amount of experience in dental identifications of the deceased. Sixty-six percent reported having suspected dental negligence or fraud in their antemortem record reviews. Only 17% believe that a forensic dentist should report suspected dental negligence, while 31% agree that dental fraud should be reported. Their response to additional issues addressed in the study suggests diversity in the practices and attitudes of forensic dentists in the use of antemortem dental records. In conclusion, opening a dialogue among practicing forensic dentists may lead to a standardized set of recommendations by the appropriate societies in the forensic dental community.     

Field capability of dogs to locate individual human teeth

Avulsed teeth can be difficult if not impossible to recover in the outdoor environment, yet are important for victim identification. This study assessed dog teams as a resource to locate human teeth in a field setting and related performance in training with field capability. Standardized, objective training data were recorded and analyzed followed by double-blind capability trials. In the double-blind trials, 10 teeth were placed in each of six (10 m(2)) plots. Search time per plot ranged from 27 to 50 min, and the proportion of teeth found by the teams varied between 0.20 and 0.79. Using 0.45 m as a distance criterion for a "find," the proportion of false positives ranged between 0.07 and 0.75. Results show that dog teams are capable of recovering individual human teeth in the field setting with high precision although capability varies. Training records support a team's expected field performance. Additional studies are needed.     

Use of diagonal teeth measurements in predicting gender in a Turkish population

Mesiodistal and buccolingual measurements, commonly used as a means of sex determination from teeth, can sometimes cause difficulties. The aim of this study is to test whether diagonal measurements can make it possible to take more accurate measurements. The results of diagonal measurements of dental casts taken from 30 males and 30 females have been evaluated by discriminant function statistics. Intra- and interobserver error tests did not indicate any statistically significant differences between the findings of two observers. Seven of the 14 measurements on the maxilla and 10 of the 14 measurements on the mandible have been found to be significantly greater in males. According to the results of the stepwise discriminant function statistics, the most contributory measurements to the function were upper first incisor mesiobuccal-distolingual (MBDL) and distobuccal-mesiolingual, lower second incisor MBDL, and lower canine MBDL. The highest reliability was obtained in MBDL measurements. It was realized that diagonal measurements of teeth, especially of canines, revealed clear dimorphic differences. Classification accuracy was found to be 83.3% for total sample, 78.3 for upper jaw, and 85.0% for the lower jaw. Accuracy rate was higher in the lower teeth. Commonly seen orthodontic anomalies, such as tooth rotations, crowding, attritions, deep dentin-enamel junction defects, and certain types of fillings, could make it difficult to correctly take width measurements or could cause other mistakes to occur. This explains the reason why this research has been considered to be of some use in diagonal measurements, which is an accurate method, particularly when employed for the front teeth.     

Morphometric analysis of third molar root development by an experimental method using digital orthopantomographs

Abstract:  The aim of the study was to conduct a morphometric analysis of the root development of the third molar, with the purpose of overcoming the limits of an exclusively morphological analysis. The study was divided in two phases. The first one was the verification of the existence of a constant crown-root (C/R) ratio on a sample of 100 third molars, characterized by a complete root development. The value obtained was used in the second phase to predict the final root's length, knowing the crown height. So we have calculated, on a sample of 322 third molars with developing roots, the final ratios between incomplete roots and complete roots. Statistical analysis was then made with 90%, 95%, and 99% confidence intervals. The results showed a significant difference according to the age of the subject and the limit values, lower and upper, for subjects aged 16 and 17 years versus those aged 18 and 19. For each analysis, the width of the class of tolerance and other statistical indicators were calculated. The results we obtained support the advantage of a morphometric study as opposed to an exclusively morphological study, but all the techniques used to determine the age of a living subject can provide only indications of the biological age, but no certainties as regards chronological age.     

Bite Mark Analysis in Foodstuffs and Inanimate Objects and the Underlying Proofs for Validity and Judicial Acceptance

Even though one of the first bite mark cases was Doyle v. State in 1954 (a bitten cheese case), the research has focused on bite marks inflicted in human skin. As published Papers, Case Reports, or Technical Notes can constitute precedents which are relied upon in making the legal arguments and a considerable amount of case law exists in this area, we present a systematic review on bite mark analysis in foodstuffs and inanimate objects and their underlying proofs for validity and judicial acceptance according to Daubert rulings. Results showed that there is vulnerability in these procedures, and it is essential to demand for focus scrutiny on the known error rates when such evidence is presented in trials. These kinds of bite marks are well documented; however, there has been little research in this field knowing that the protocols of analysis and comparison are the responsibility of the forensic odontologists.     

Lessons learned from large-scale comparative dental analysis following the South Asian tsunami of 2004

The aim of this study was to examine the quality of the ante-(AM) and postmortem (PM) dental data that were submitted for entry into the PLASS data system in Phuket, Thailand, following the Boxing Day (December 26) Tsunami, 2004. The investigators were two forensic odontologists who were part of the New Zealand Disaster Victim Identification team that worked at Wat Yang Yao morgue and at the Information Management Center in Phuket. Our findings underline the usefulness of dental data in human identification, but point to a number of significant sources of error. Of the 78 PM records received, only 68% of radiographs and 49% of photos confirmed the accompanying dental charting. This underlines the value, particularly of photographs of the dental arches, in quality control. It also points to a large error component, which may have been due to inexperience of the operators, fatigue, poor conditions in the temporary morgue, or the problem of tooth-colored fillings. Of the 106 AM records received, 62% were of unacceptable quality and 64% were either not accompanied by radiographs or had poor quality radiographs. These results indicate that AM data collection ideally needs to be collated and checked by a forensically trained dentist(s) in the country of origin.     

A comparison of animal jaws and bite mark patterns

The purpose of this study was to compare the jaw shapes and bite mark patterns of wild and domestic animals to assist investigators in their analysis of animal bite marks. The analyses were made on 12 species in the Order Carnivora housed in the Mammalian Collection at the Field Museum of Natural History in Chicago, Illinois. In addition to metric analysis, one skull from each species was photographed as a representative sample with an ABFO No. 2 scale in place. Bite patterns of the maxillary and mandibular dentition were documented using foamed polystyrene exemplars, which were also photographed. A total of 486 specimens were examined to analyze the jaw and bite mark patterns. A modified technique for measuring intercanine distances was developed to more accurately reflect the characteristics seen in animal bite marks. In it, three separate areas were measured on the canines, rather than just the cusp tip. This was to maximize the amount of information acquired from each skull, specifically to accommodate variances in the depth of bite injuries.     

Detection and classification of composite resins in incinerated teeth for forensic purposes

The great demand for esthetic restorations has resulted in placement of large numbers of composite resin fillings. The popularity of these materials is reflected in the quantity and variety of resin brands currently on the market. The ability to distinguish resin brands can aid in positive identification of burn victims, assuming that appropriate dental records exist. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) was used to characterize the structure and composition of 10 modern resins. The structure of each resin was unique to manufacturer, and elemental analysis allowed separation into distinct groups. These 10 resins were also placed in extracted teeth and incinerated at 900 degrees C for 30 min, simulating near cremation conditions. The resins were identifiable by SEM/EDS after incineration, and the elemental composition remained almost unchanged. The data produced are immediately useful for resin identification in forensics, and comparative analysis can be readily performed using standard equipment. This work represents the initial stage of database generation.     

Effectiveness of comparison overlays generated with DentalPrint software in bite mark analysis

Validation studies of the new DentalPrint software were carried out with experimental bite marks in pigskin. The bite marks were digitally photographed according to the ABFO guidelines for evidence collection. Dental casts used in the experiment were scanned in 3D and 2D, and comparison overlays were generated using DentalPrint and Adobe Photoshop software, respectively. Digitized photographs of the experimental bite marks and the biting edges obtained in the overlays were compared by two different examiners to analyze the impact of training and experience with the two methods. Receiver operating characteristic (ROC) analysis, sensitivity, specificity, and 95% confidence intervals for each cutoff point were calculated. The expert examiner using DentalPrint obtained the best results, with an area under the ROC curve of 0.76 (SE=0.057; CI at 95%=0.652-0.876). Fairly high specificity values were found for DentalPrint, and the best results were obtained for the cutoff value that discriminated between the examiner's response "biter" and the rest of the possible (specificity 97.9%, CI at 95%=93.2%-99.6%). Therefore, the results presented here indicate that DentalPrint is a useful, accurate tool for forensic purposes, although further research on the comparison process is needed to enhance the validity of bite mark analysis.     

A Morphological and Morphometric Study of Bite Marks Caused by Mice (Mus Musculus) on Different Baits for Forensic Purposes

In animal bites, the dental attributes can be fundamental in identifying the marks made by various species on different matrices. Although rodent bite marks have been studied in the context of postmortem interference, little research has used different baits to analyze these marks linking not only specific behavior patterns but also the possibility of structural damage. Twenty mice (Mus musculus) were exposed to different baits to study their bite marks in a controlled model. The known pattern of parallel and multiple grooves has been seen in all baits, but polyvinyl chloride and fiber‐optic cable were significantly different between each other and the other baits. Some baits showed patterns of anchorage of the upper incisors and space between the lower incisors when gnawing. This technical note represents a novel model of analysis where veterinarians and/or dentists may be asked to give an opinion on alleged animal bite marks.     

Morphologic patterns of lip prints in a portuguese population: a preliminary analysis

Lip prints are thought to have the ability to distinguish individuals and, hence, have a potential use in human identification purposes. However, questions remain regarding their utility for sex determination. This study aimed to classify lip prints for different individuals in a Portuguese population and to determine whether sex differences exist. Lip prints of 25 females and 25 males were obtained using dark-colored lipstick and cellophane tape. Lip prints were analyzed using a magnifying lens and classified according to the Suzuki and Tsuchihashi classification. A Type II pattern was found to be most common. A comparison of lip-print patterns between males and females showed results with a statistically significant difference: Type III pattern was most common in males, and a Type II pattern in females. This study corroborates the hypothesis that lip prints are able to distinguish individuals and may be useful in sex determination.     

Contrast Enhancement of Bite Mark Images Using the Grayscale Mixer in ACR in Photoshop®

Enhanced images may improve bite mark edge definition, assisting forensic analysis. Current contrast enhancement involves color extraction, viewing layered images by channel. A novel technique, producing a single enhanced image using the grayscale mix panel within Adobe Camera Raw^®, has been developed and assessed here, allowing adjustments of multiple color channels simultaneously. Stage 1 measured RGB values in 72 versions of a color chart image; eight sliders in Photoshop^® were adjusted at 25% intervals, all corresponding colors affected. Stage 2 used a bite mark image, and found only red, orange, and yellow sliders had discernable effects. Stage 3 assessed modality preference between color, grayscale, and enhanced images; on average, the 22 survey participants chose the enhanced image as better defined for nine out of 10 bite marks. The study has shown potential benefits for this new technique. However, further research is needed before use in the analysis of bite marks.     

Accuracy of 3D Scanners in Tooth Mark Analysis

The objective of this study was to compare the accuracy of contact and laser 3D scanners in tooth mark analysis. Ten dental casts were scanned with both 3D scanners. Seven linear measurements were made from the 3D images of dental casts and biting edges generated with DentalPrint© software (University of Granada, Granada, Spain). The uncertainty value for contact 3D scanning was 0.833 for the upper dental cast and 0.660 mm for the lower cast; similar uncertainty values were found for 3D-laser scanning. Slightly higher uncertainty values were obtained for the 3D biting edges generated. The uncertainty values for single measurements ranged from 0.1 to 0.3 mm with the exception of the intercanine distance, in which higher values were obtained. Knowledge of the error rate in the 3D scanning of dental casts and biting edges is especially relevant to be applied in practical forensic cases.     

Experimental Study of Bite Mark Injuries by Digital Analysis

Abstract: This study was based on a morphometric analysis of bite marks starting from the quantitative definition of the anterior teeth by the geometric acquisition of the “injuries,” using bite marks impressed on pig skin and plastic. Each mark was photographed and acquired. A dedicated program automatically supplied the values of the shape factors and the areas of the pattern geometric figures. The values obtained for the homologous samples were compared to the heterologous values. Statistical comparison was made of the sets by linear regression, determining the correlation coefficient and the determination coefficient for each value. Results showed only 4.8% and 2% of overlap between homologous and heterologous values. This study was carried out in attempting to quantitatively define the anterior teeth of the human dentition and the procedure described and the results obtained support the advantage of morphometric studies and computer‐aided programs in this study of bite marks.     

Bite marks: physical properties of ring adhesion to skin--phase 2

Abstract: Bite Marks: This study demonstrated that surface wetness was the most influential factor affecting ring adhesion to skin. Also, chemical depilatories and shaving creams were to be avoided when cleaning the skin. The second phase of this research examines the tensile stress needed to rupture the bond between TAK^® hydroplastic, three new cyanoacrylates, and pigskin with particular consideration for temperature variations. This study also considers solubility issues of different cyanoacrylates in 10% formalin. Finally, the Dorion Type V bitemark excision technique could significantly reduce the risks of tissue distortion when used in conjunction with the following methods and materials. The skin should be devoid of moisture, razor shaved, and cleaned with dishwashing detergent and 98.9% ethanol while avoiding the use of shaving creams and/or chemical depilatories where ring placement is anticipated. The use of unopened cyanoacrylate is encouraged with Permabond^® as the cyanoacrylate of choice.