A study of multiple bitemarks inflicted in human skin by a single dentition using geometric morphometric analysis

Criticisms of the forensic discipline of bitemark analysis state that the range of distortion in the shape of bitemark impressions in skin has not been scientifically established. No systematic statistical studies exist that explore this problem. As a preliminary investigation of this issue, a single dentition was mounted in a mechanical apparatus and used to create 89 bitemarks in human cadaver skin, both parallel and perpendicular to tension lines. Impressions of the same dentition were also created in wax. 2D scanned images of the biting dentition were obtained. Locations of incisal edges of all 6 anterior teeth as well as the midpoint of the canine were captured as landmarks in all specimens. This set of landmark data was then studied using established geometric morphometric methods. All specimen shapes were compared using Procrustes superimposition methods, and by a variation of Procrustes superimposition which preserves scale information. Match criteria were established by examining the range of variation produced by repeated measurements of the dentition for each class of specimen. The bitemarks were also compared to a population of 411 digitally scanned dentitions, again using the match criteria. Results showed that bitemarks in wax had lower measurement error than scanned images of the dentition, and both were substantially lower than measurement error as recorded in skin. None of the 89 bitemarks matched the measured shape of the biting dentition or bitemarks in wax, within the repeated measurements error level, despite the fact that all bitemarks were produced by this dentition. Comparison of the bitemarks to the collection of 411 dentitions showed that the closest match to the bitemarks was not always the same dentition that produced the bitemarks. Examination of Procrustes plots of matched shapes showed non-overlapping distributions of measurements of bitemarks in skin, wax, and the dentition. All had statistically significant differences in mean shape. Principal component analysis (PCA) and canonical variates analysis (CVA) both showed clear segregation of the three types of data. The patterns of variance revealed by PCA showed several distinct patterns produced by skin distortion; alteration of relative arch width, and varying displacement of non-aligned teeth in the dentition. These initial results indicate that when multiple suspects possess similar dentitions, bitemark analysis should be approached with caution.     

Patterns of Variation and Match Rates of the Anterior Biting Dentition: Characteristics of a Database of 3D‐Scanned Dentitions

An understanding of the variability of the anterior human dentition is essential in bitemark analysis. A collection of 1099 3D laser scans of paired maxillary and mandibular arches were studied using geometric morphometric methods. Analyses were performed without scale (shape only) and with scale (shape and size). Specimens differing by no more than experimentally obtained measurement error were counted as matches, or as indistinguishable. A total of 487 maxillary (396 size preserved), 131 mandibular (83 size preserved), and one paired dentition (two size preserved) matches were found. Principal component analysis and partial least squares revealed interpretable patterns of variation and covariation in dental shape, principally dominated by variation in dental arch width. The sensitivity of match rate to assumed degree of measurement error was also determined showing rapid increases in match rate as measurement error increased. In conclusion, the concept of dental uniqueness with regard to bitemark analysis should be approached with caution.     

Mandibular morphology as an indicator of human subadult age: interlandmark approaches

The dentition is widely recognized as the set of developmental markers that appear to show the least variability against chronological age; these markers are thus widely used in forensic anthropological investigations. As a possible alternative, we investigate here the potential of mandibular morphology as a developmental marker for estimating age at death in subadults. The sample analyzed comprises 79 known age and sex subadult individuals of South African Bantu and African American origin. Linear measurements of ramus height were obtained from the mathematical conversion of three-dimensional landmark data. A series of regression analyses were then performed to predict age by using the measurement of ramus height; results were cross-validated using a jackknife procedure. Our results show that ramus height can be used to predict age in the subadult skeleton with accuracy, closely approaching that of standards based on the dentition (standard error rates are between +/-1.1 years and +/-2.4 years).     

A New Method to Pair‐match Metacarpals Using Bilateral Asymmetry and Shape Analysis

Matching pairs of skeletal elements is of fundamental importance when re‐associating skeletons from commingled settings. This study presents a new method that combines the use of traditional anthropometric size measurements and the analysis of shape, through geometric morphometrics, to form pairs from commingled settings. We tested the hypothesis that shape asymmetry among individuals is smaller than between individuals that share similar dimensions. The metacarpals were measured in their maximum length, and absolute means of asymmetry between right and left metacarpals were calculated. To analyze the shape characteristics, two‐dimensional landmarks were recorded from digital images of 111 metacarpals. The specimens were analyzed using generalized Procrustes analysis and multivariate statistics. The accuracy of pair‐matching bones using a combined method was of 100%, showing that the incorporation of geometric morphometrics techniques—in the assessment of shape in physical anthropology—is of particular use when comparing the shape differences/similarities between individuals.     

A technique to capture, analyze, and quantify anterior teeth rotations for application in court cases involving tooth marks

Anterior teeth within the human dentition have a specific numerical rotation value. Bite marks show an array of angled indentations, abrasions, microlacerations, and contusions. These marks generally represent the incisal surfaces of the suspect's dentition reflecting the rotation values of the teeth in the dental arch. This study described a method for capturing and analyzing anterior dental rotations. The rotations of individual anterior teeth within the study population were categorized as common, uncommon, and very uncommon according to Allen's classification. In the absence of a large number of incisal patterns present in a bite mark, a single but heavily weighted tooth rotation could be of equal discriminatory potential to several common rotation values. No prevalence studies quantifying individual tooth rotations are available. The measurement of each individual tooth rotation together with its individual discrimination potential will enhance the evaluation of the concordant features observed in bite marks.     

Statistical Evidence for the Similarity of the Human Dentition

Abstract: Recent scrutiny of forensic science has focused on unreliability of expert witness testimony when based on statements of individuality. In bitemark analysis, assumptions regarding uniqueness of the dentition have been based on use of the product rule while ignoring correlation and nonuniformity of dental arrangement. To examine the effect of these factors, two separate sets of scanned dental models (n = 172 and n = 344) were measured and statistically tested to determine match rates. Results were compared to those of a prior study. Seven and 16 matches of the six anterior lower teeth were found in the respective data sets. Correlations and nonuniform distributions of tooth positions were observed. Simulation tests were performed to verify results. Results indicate that given experimental measurement parameters, statements of dental uniqueness with respect to bitemark analysis in an open population are unsupportable and that use of the product rule is inappropriate.     

Dental shape match rates in selected and orthodontically treated populations in New York State: a two-dimensional study

Forensically identifying a suspect's dentition from a bitemark in an open population requires the supposition that every person's dental alignment is different. There have been few studies that have tested this claim. Four hundred and ten lower anterior dentitions from a selected population and 110 lower anterior dentitions from one that was orthodontically treated were measured using geometric morphometric analysis, allowing comparison of arch shape. Dental match rates of 1.46% and 42.7% of individuals were found in the respective populations, given an established measurement error. Orthodontic treatment had a strong effect on match rate suggesting that treated or naturally well-aligned dentitions may be indistinguishable. Sexual dimorphism was found to be only slightly significant. Principal shape variation in both populations was degree of arch curvature. Results of studying these populations show that dental matches can occur, and that statements of certainty concerning individualization in such populations should be approached with caution.     

Experimental Study of Bite Mark Injuries by Digital Analysis

Abstract: This study was based on a morphometric analysis of bite marks starting from the quantitative definition of the anterior teeth by the geometric acquisition of the “injuries,” using bite marks impressed on pig skin and plastic. Each mark was photographed and acquired. A dedicated program automatically supplied the values of the shape factors and the areas of the pattern geometric figures. The values obtained for the homologous samples were compared to the heterologous values. Statistical comparison was made of the sets by linear regression, determining the correlation coefficient and the determination coefficient for each value. Results showed only 4.8% and 2% of overlap between homologous and heterologous values. This study was carried out in attempting to quantitatively define the anterior teeth of the human dentition and the procedure described and the results obtained support the advantage of morphometric studies and computer‐aided programs in this study of bite marks.     

Identification through X-ray fluorescence analysis of dental restorative resin materials: a comprehensive study of noncremated, cremated, and processed-cremated individuals

Tooth-colored restorative materials are increasingly being placed in the practice of modern dentistry, replacing traditional materials such as amalgam. Many restorative resins have distinct elemental compositions that allow identification of brand. Not only are resins classifiable by elemental content, but they also survive extreme conditions such as cremation. This is of significance to the forensic odontologist because resin uniqueness adds another level of certainty in victim identification, especially when traditional means are exhausted. In this three-part study, unique combinations of resins were placed in six human cadavers (total 70 restorations). Simulated ante-mortem dental records were created. In a blind experiment, a portable X-ray fluorescence (XRF) unit was used to locate and identify the resin brands placed in the dentition. The technique was successful in location and brand identification of 53 of the restorations, which was sufficient to enable positive victim identification among the study group. This part of the experiment demonstrated the utility of portable XRF in detection and analysis of restorative materials for victim identification in field or morgue settings. Identification of individuals after cremation is a more difficult task, as the dentition is altered by shrinkage and fragmentation, and may not be comparable with a dental chart. Identification of processed cremains is a much greater challenge, as comminution obliterates all structural relationships. Under both circumstances, it is the nonbiological artifacts that aid in identification. Restorative resin fillings can survive these conditions, and can still be named by brand utilizing elemental analysis. In a continuation of the study, the cadavers were cremated in a cremation retort under standard mortuary conditions. XRF was again used to analyze retrieved resins and to identify the individuals based on restorative materials known to exist from dental records. The cremains were then processed and the analysis was repeated to determine whether restorative resins could be found under this extreme condition. Under both circumstances, sufficient surviving resin material was found to distinguish positively each individual in the study group. This study showed the utility of XRF as an analytical tool for forensic odontology and also the significance of the role of restorative resins in victim identification, even after cremation.     

An Exploration of Sample Representativeness in Anthropometric Facial Comparison*

Abstract: Faces are assumed to be unique, but their use in court has remained problematic as no method of comparison with known error rates has been accepted by the scientific community. Rather than relying on the assumed uniqueness of facial features, previous research has been directed at estimations of face shape frequency. Here, the influence of age, sex, and ancestry on variation was investigated. Statistical shape analysis was used to examine the necessity for sub‐divisions in forensic comparisons, using a large sample of facial images on which 30 anthropometric landmark points had been placed in 3D. Results showed a clear pattern of separation of the sexes in all age groups, and in different age groups in men. It was concluded that sub‐division of databases by sex will be necessary in forensic comparisons. Sub‐division by age may be necessary in men (although not necessarily in women), and may be necessary by ancestry.     

Clinically Detectable Dental Identifiers Observed in Intra‐oral Photographs and Extra‐oral Radiographs,Validated for Human Identification Purposes

Screening the prevalence and pattern of dental identifiers contributes toward the process of human identification. This research investigated the uniqueness of clinical dental identifiers in photographs and radiographs. Panoramic and lateral cephalometric radiographs and five intra‐oral photographs of 1727 subjects were used. In a target set, two observers examined different subjects. In a subset, both observers examined the same subjects (source set). The distance between source and target subjects was quantified for each identifier. The percentage of subjects in the target set being at least as close as the correct subject was assessed. The number of molars (34.6%), missing teeth (42%), and displaced teeth (59.9%) were the most unique identifiers in photographs and panoramic and lateral cephalometric radiographs, respectively. The pattern of rotated teeth (14.9%) was the most unique in photographs, while displaced teeth was in panoramic (37.6%) and lateral cephalometric (54.8%) radiographs. Morphological identifiers were the most unique, highlighting their importance for human identifications.     

The Response of Skin to Applied Stress: Investigation of Bitemark Distortion in a Cadaver Model*

Abstract: Knowledge of distortional properties of skin is important in bitemark analysis. Thus, the response of skin to stress from bites was investigated. Four sets of models were created from the dentition of one individual. Anterior teeth were systematically removed to vary contact surface area. A biting apparatus was constructed with an integrated load cell. Forty‐six bites were created perpendicular to Langer lines on six cadavers. Rate of force application and bite pressure were controlled. Metric/angular measurement and hollow volume overlays were employed. Distortion produced by each dentition was calculated and assessed. Results showed that as teeth impressed loose tissue, mesial/distal distance increased, angles of rotation flattened, and inter‐canine distance lengthened. An opposite effect was seen in tight tissue. When the surface area of the dentition was reduced, a mixture of these effects was observed. Conclusions indicated that stiffness of the tissue was the most important variable in bitemark distortion.     

A Radiographic Study on the Utility of Cranial Vault Outlines for Positive Identifications

A standard method for positive identification is the use of antemortem and postmortem radiographic comparisons. The purpose of this research is to test the visual accuracy of antemortem and postmortem radiographic comparisons of cranial vault outlines and to evaluate their uniqueness using geometric morphometric methods. A sample of 106 individuals with varying levels of education and forensic case experience participated in a visual accuracy test. Of the 106 individuals, only 42% correctly assigned all of the radiographs, with accuracy rates ranging from 70 to 93% for each radiographic comparison. Vault shape was further examined using elliptic Fourier analysis, and paired t‐tests were computed on the first 10 principal components accounting for 100% of the variance, which found no significant differences. The visual accuracy test and elliptic Fourier analysis shows that vault outlines may not be unique enough for positive identifications when used as a sole indicator.     

利用腭皱特征进行同一认定的指标体系构建

目的根据腭皱的形态图特征,进行口腔腭皱在法医学同一认定的指标体系构建。方法收集100例成年人腭皱模型,依据腭皱的形状、数量、位置分布等特征对腭皱形态图进行全面系统的编码。编码顺序采用英文字母按照先右侧再左侧,先前部再后部的顺序编码,并且右、左侧编码以破折号连接。最后依据编码,统计分析腭皱形态分布特征。结果 100例腭皱形态图中,个体间未见完全一致者,每个个体不论男性与女性均表现有独特的腭皱形态图;且同一个体左右侧单条腭皱的形态及分布亦不同。波浪形腭皱所占比例最大（23.03%）,三分叉形出现比例最小（0.74%）,不同性别的波浪形及曲线形腭皱所占比例均较大,女性波浪形（22.7%）及曲线形（18.28%）;男性波浪形（24.11%）及曲线形（21.43%）。结论口腔腭皱法医学同一认定的指标体系构建,将为法医学的同一认定提供一种新的方法。     

National survey of the incidence of missing anterior teeth: Potential use in bite mark analysis in the Brazilian context

Bite mark analysis in forensic dentistry presupposes that the human dentition is unique and that its characteristics can be transferred precisely to several materials. The aim of the present study was to register the frequency of missing anterior teeth in the Brazilian adult population, discussing its potential importance in bite mark analysis. Data from the Brazilian Oral Health Survey were used; 13,431 male and female individuals aged 35 to 44 were examined according to the criteria of the World Health Organization. The analysis of Poisson regression was performed in order to calculate the rating ratios and the respective confidence interval at 95%. A total of 13,431 adults participated in the study. Among male individuals, 2063 (47.00%) were dentate and 2036 (46.40%) had at least one missing tooth. Only 254 (5.83%) were totally edentulous. A significant number of males and females presented 6 missing teeth in the same dental arch, revealing the poor state of oral health of adult Brazilians. Missing teeth were more frequent in the upper dental arch than in the lower arch. In the upper dental arch, the incisor group (central and lateral) was missing the most. In the lower dental arch, however, a certain lack of homogeneity was observed among the different dental groups as regards missing teeth. White individuals presented a smaller proportion of missing teeth compared to the other ethnic groups. Females were 1.61 (CI 1.50–1.73) times more likely than males to present missing teeth. The absence of upper teeth and the presence of lower teeth were observed in 16.10% of the individuals. Further research should also include an analysis of different age groups. This would increase the potential of applying this kind of information to bite mark analysis.     

Differentiation of traumatic and heat-induced dental tissue fractures via SEM analysis

Previous studies have examined the effects of heating on teeth; however, none have identified characteristics that allow analysts to differentiate traumatic from heat-induced fractures. This study examined our ability to discern notable differences in preincineration traumatic fractures and heat-induced fractures in postincineration dentition. Twelve anterior dental specimens were subjected to blunt force trauma while a second set were not. All 24 samples were then incinerated in a muffle furnace at a peak temperature (900°C) consistent with house fires. The specimens were subsequently examined with a scanning electron microscope to identify and compare heat-induced and traumatic fractures. The results obtained during examination yielded no differences between the features displayed by specimens that had been inflicted with preincineration trauma and those that did not. Unlike bone, distinguishing features for the differentiation of traumatic and heat-induced fractures could not be compiled.     

A test of the differential accuracy of the maxillary versus the mandibular dentition in age estimations of immature skeletal remains based on developing tooth length

Liversidge and colleagues developed a method for predicting the age of immature skeletal remains based on the length of developing teeth. This quantitative method combines dental data from both jaws, except for the permanent lateral incisor, and because there are reasons to suspect that these two types of data are not identical and should not be combined, it raises concerns regarding the accuracy of the technique when applied differently to each jaw. In this study, the differential accuracy of the method was test when applied to the maxillary and mandibular dentition. The test sample is comprised of 57 Portuguese subadult skeletons of known age at death. Results suggest an overall high consistency between estimates obtained from both jaws, but for the permanent dentition only. In the deciduous dentition the age estimates obtained from the maxillary teeth tend to be greater than the age estimates obtained from the mandibular pair, and the differences are significant for the incisors and canine. Additionally, ages obtained from the maxillary deciduous canine also differ significantly from true chronological age. In the permanent dentition there were no differences between the ages provided by both jaws but both the maxillary and mandibular second molars show a significant tendency to underestimate true chronological age. Although this study cannot validate completely the method presented by Liversidge and colleagues, it does provide an important test to its accuracy and calls for further research into its overall performance, particularly with respect to the results obtained from both jaws.     

Uniqueness of the Dentition as Impressed in Human Skin: A Cadaver Model*

Abstract: Bitemark interpretation assumes that the human dentition is unique and that its attributes can be accurately transferred to skin. A cadaver model was used to investigate whether the correct biter could be determined from similarly aligned dentitions once the dentitions were impressed in human skin. One‐hundred dental stone models, which were measured and determined to be unique, were divided into 10 groups based upon similarities of mal‐alignment patterns. One model was randomly selected from each group and bites were produced on unembalmed human cadavers. Metric/angular measurements and hollow volume overlays of the models were compared with the bites made. The percentage of dentitions from each group as well as the 100 dental model population that could not be excluded as the biter was determined. Results showed difficulty distinguishing the biter from individuals with similarly aligned dentitions and in some cases, an incorrect biter appeared better correlated to the bite.     

GrinLine Identification Using Digital Imaging and Adobe Photoshop*

Abstract: The purpose of this study was to outline a method by which an antemortem photograph of a victim can be critically compared with a postmortem photograph in an effort to facilitate the identification process. Ten subjects, between 27 and 55 years old provided historical pictures of themselves exhibiting a broad smile showing anterior teeth to some extent (a grin). These photos were termed “antemortem” for the purpose of the study. A digital camera was used to take a current photo of each subject’s grin. These photos represented the “postmortem” images. A single subject’s “postmortem” photo set was randomly selected to be the “unknown victim.” These combined data of the unknown and the 10 antemortem subjects were digitally stored and, using Adobe Photoshop software, the images were sized and oriented for comparative analysis. The goal was to devise a technique that could facilitate the accurate determination of which “antemortem” subject was the “unknown.” The generation of antemortem digital overlays of the teeth visible in a grin and the comparison of those overlays to the images of the postmortem dentition is the foundation of the technique. The comparisons made using the GrinLine Identification Technique may assist medical examiners and coroners in making identifications or exclusions.     

Bite mark documentation and analysis: the forensic 3D/CAD supported photogrammetry approach

Bite mark identification is based on the individuality of a dentition, which is used to match a bite mark to a suspected perpetrator. This matching is based on a tooth-by-tooth and arch-to-arch comparison utilising parameters of size, shape and alignment. The most common method used to analyse bite mark are carried out in 2D space. That means that the 3D information is preserved only two dimensionally with distortions. This paper presents a new 3D documentation, analysis and visualisation approach based on forensic 3D/CAD supported photogrammetry (FPHG) and the use of a 3D surface scanner. Our photogrammetric approach and the used visualisation method is, to the best to our knowledge, the first 3D approach for bite mark analysis in an actual case. The documentation has no distortion artifacts as can be found with standard photography. All the data are documented with a metric 3D measurement, orientation and subsequent analysis in 3D space. Beside the metrical analysis between bite mark and cast, it is possible using our method to utilise the topographical 3D feature of each individual tooth. This means that the 3D features of the biting surfaces and edges of each teeth are respected which is--as shown in our case--very important especially in the front teeth which have the first contact to the skin. Based upon the 3D detailed representation of the cast with the 3D topographic characteristics of the teeth, the interaction with the 3D documented skin can be visualised and analysed on the computer screen.