Development of a Library Search‐Based Screening System for 3,4‐Methylenedioxymethamphetamine in Ecstasy Tablets Using a Portable Near‐Infrared Spectrometer

This is the first report on development of a library search‐based screening system for 3,4‐methylenedioxymethamphetamine (MDMA) in ecstasy tablets using a portable near‐infrared (NIR) spectrometer. The spectrum library consisted of spectra originating from standard substances as well as mixtures of MDMA hydrochloride (MDMA‐HCl) and diluents. The raw NIR spectra were mathematically pretreated, and then, a library search was performed using correlation coefficient. To enhance the discrimination ability, the wavelength used for the library search was limited. Mixtures of MDMA‐HCl and diluents were used to decide criteria to judge MDMA‐positive or MDMA‐negative. Confiscated MDMA tablets and medicinal tablets were used for performance check of the criteria. Twenty‐two of 27 MDMA tablets were truly judged as MDMA‐positive. Five false‐negative results may be caused by compounds not included in the library. No false‐positive results were obtained for medicinal tablets. This system will be a useful tool for on‐site screening of MDMA tablets.     

The Use of Near‐Infrared Photography to Image Fired Bullets and Cartridge Cases

An imaging technique that is capable of reducing glare, reflection, and shadows can greatly assist the process of toolmarks comparison. In this work, a camera with near‐infrared (near‐IR) photographic capabilities was fitted with an IR filter, mounted to a stereomicroscope, and used to capture images of toolmarks on fired bullets and cartridge cases. Fluorescent, white light‐emitting diode (LED), and halogen light sources were compared for use with the camera. Test‐fired bullets and cartridge cases from different makes and models of firearms were photographed under either near‐IR or visible light. With visual comparisons, near‐IR images and visible light images were comparable. The use of near‐IR photography did not reveal more details and could not effectively eliminate reflections and glare associated with visible light photography. Near‐IR photography showed little advantages in manual examination of fired evidence when it was compared with visible light (regular) photography.     

Computer‐aided Dental Identification: An Objective Method for Assessment of Radiographic Image Similarity*

Abstract: A pilot study evaluated a computer‐based method for comparing digital dental images, utilizing a registration algorithm to correct for variations in projection geometry between images prior to a subtraction analysis. A numerical assessment of similarity was generated for pairs of images. Using well‐controlled laboratory settings, the method was evaluated as to its ability to identify the correct specimen with positive results. A subsequent clinical study examined longitudinal radiographic examinations of selected anatomical areas on 47 patients, analyzing the computer‐based method in making the correct identification based upon a threshold level of similarity. The results showed that at a threshold of 0.855, there were two false negative and two false positive identifications out of 957 analyses. Based on these initial findings, 25 dental records having two sets of full mouth series of radiographs were selected. The radiographs were digitized and grouped into six anatomical regions. The more recent set of films served as postmortem images. Each postmortem image was analyzed against all other images within the region. Images were registered to correct for differences in projection geometry prior to analysis. An area of interest was selected to assess image similarity. Analysis of variance was used to determine that there was a significant difference between images from the same individual and those from different individuals. Results showed that the threshold level of concordance will vary with the anatomical region of the mouth examined. This method may provide the most objective and reliable method for postmortem dental identification using intra‐oral images.     

Human Identification Using Automatic and Semi‐Automatically Detected Facial Marks

Continuing advancements in the field of digital cameras and surveillance imaging devices have led law enforcement and intelligence agencies to use analysis of images and videos for the investigation and prosecution of crime. When determining identity from photographic evidence, forensic analysts perform comparison of visible facial features manually, which is inefficient. In this study, we will address research efforts to use facial marks as biometric signatures to distinguish between individuals. We propose two systems to assist forensic analysts during photographic comparison: an improved multiscale facial mark system in which facial marks are detected automatically, and a semi‐automatic facial mark system that integrates human knowledge within the improved multiscale facial mark system. Experiment results employ a high‐resolution time‐elapsed dataset acquired at the University of Notre Dame between 2009 and 2011. The results indicate that the geometric distributions of facial mark patterns can be used to distinguish between individuals.     

Effects of High‐g Impact on Physical,Electrical, and Optical Characteristics of Light‐Emitting Diodes

Previously, one of the tools available in automotive or aircraft accident analysis was the examination of the indicator bulbs. Currently, indicator bulbs have been largely replaced by light‐emitting diodes (LEDs). Here a series of studies was carried out on impact effects on LEDs to determine whether their properties change after impact, and whether it is related to its working status (lit or unlit). The LEDs were measured before mechanical shock with a series of tests, including current–voltage, current–light, bandwidth, subject to impact ranging from 450 g to 2000 g, and then retested. The tests showed consistent slight but statistically significant increases in forward voltages at a given current after impact, which could be used to estimate the impact. Some LEDS were imaged before and after impact with thermal and X‐ray imaging, but no mechanical changes were seen. It was not possible to determine the LED's working status from these test results.     

A New Anti‐forensic Scheme—Hiding the Single JPEG Compression Trace for Digital Image

To prevent image forgeries, a number of forensic techniques for digital image have been developed that can detect an image's origin, trace its processing history, and can also locate the position of tampering. Especially, the statistical footprint left by JPEG compression operation can be a valuable source of information for the forensic analyst, and some image forensic algorithm have been raised based on the image statistics in the DCT domain. Recently, it has been shown that footprints can be removed by adding a suitable anti‐forensic dithering signal to the image in the DCT domain, this results in invalid for some image forensic algorithms. In this paper, a novel anti‐forensic algorithm is proposed, which is capable of concealing the quantization artifacts that left in the single JPEG compressed image. In the scheme, a chaos‐based dither is added to an image's DCT coefficients to remove such artifacts. Effectiveness of both the scheme and the loss of image quality are evaluated through the experiments. The simulation results show that the proposed anti‐forensic scheme can verify the reliability of the JPEG forensic tools.     

Use of styryl 11 and STaR 11 for the luminescence enhancement of cyanoacrylate-developed fingermarks in the visible and near-infrared regions

In current casework, most post-cyanoacrylate stains rely on luminescence emission in the visible region (400-700 nm). While traditional stains such as rhodamine 6G work well under most circumstances, some surfaces may generate background luminescence under the same conditions. Detection in the near-infrared region (NIR > 700 nm) has shown to be effective in minimizing the interferences from such surfaces. The laser dye styryl 11 generated strongly luminescent fingermarks when applied after cyanoacrylate fuming on all surfaces tested. When compared to rhodamine 6G, the dye was superior only when viewed in the NIR. Styryl 11 was subsequently combined with rhodamine 6G, and the mixed stain formulation (named StaR 11 by the authors) induced stronger luminescence compared with styryl 11 alone with an ability to visualize in both the visible and NIR regions. Reliable and consistent results were obtained when using either styryl 11 alone or the STaR 11 mixture. The enhancement achieved did not otherwise vary depending on the source of the fingermark secretions. With visualization possible in both the visible and NIR regions, the styryl 11/rhodamine 6G mixture showed significant potential as a post-cyanoacrylate stain.     

Forensic Analysis of Human Autopsy Tissue for the Presence of Polydimethylsiloxane (Silicone) and Volatile Cyclic Siloxanes using Macro FT‐IR,FT‐IR Spectroscopic Imaging and Headspace GC‐MS

This study describes effective and straightforward primary and secondary methods for the detection of silicone in human autopsy tissue. The primary method is polydimethylsiloxane (PDMS) specific and employs either macro‐attenuated total reflection Fourier transform infrared (ATR‐FT‐IR) spectroscopy for samples with a high PDMS concentration (relative to that of the matrix) or micro‐FT‐IR spectroscopic imaging in a reflection/absorption modality for samples with a low PDMS concentration. Although the secondary method is not PDMS specific, it employs headspace gas chromatography with mass spectrometric detection (HS/GC‐MS) for the detection of low molecular weight volatile cyclic siloxanes (VCS), which are characteristic marker compounds for PDMS. Overall, the combined results from the primary and secondary analyses provide reliable evidence for the presence of silicone.     

Modeling Bone Surface Morphology: A Fully Quantitative Method for Age‐at‐Death Estimation Using the Pubic Symphysis

The pubic symphysis is widely used in age estimation for the adult skeleton. Standard practice requires the visual comparison of surface morphology against criteria representing predefined phases and the estimation of case‐specific age from an age range associated with the chosen phase. Known problems of method and observer error necessitate alternative tools to quantify age‐related change in pubic morphology. This paper presents an objective, fully quantitative method for estimating age‐at‐death from the skeleton, which exploits a variance‐based score of surface complexity computed from vertices obtained from a scanner sampling the pubic symphysis. For laser scans from 41 modern American male skeletons, this method produces results that are significantly associated with known age‐at‐death (RMSE = 17.15 years). Chronological age is predicted, therefore, equally well, if not, better, with this robust, objective, and fully quantitative method than with prevailing phase‐aging systems. This method contributes to forensic casework by responding to medico‐legal expectations for evidence standards.     

A New Index for the MMPI‐2 Test for Detecting Dissimulation in Forensic Evaluations: A Pilot Study

This pilot study is the starting point of a potentially broad research project aimed at identifying new strategies for assessing malingering during forensic evaluations. The forensic group was comprised of 67 males who were seeking some sort of certification (e.g., adoption, child custody, driver's license, issuance of gun permits, etc.); the nonforensic group was comprised of 62 healthy male volunteers. Each participant was administered the MMPI‐2. Statistical analyses were conducted on obtained scores of 48 MMPI‐2 scales. In the first step, parametric statistics were adopted to identify the best combination of MMPI‐2 scales that differentiated the two groups of participants. In the second step, frequency‐based, nonparametric methods were used for diagnostic purposes. Results: A model that utilized the best three predictors (“7‐Pt”, “L,” and “1‐Hs”) was developed and used to calculate the Forensic Evaluation Dissimulation Index (FEDI), which features satisfactory diagnostic accuracy (0.9), sensitivity (0.82), specificity (0.81), and likelihood ratio indices (LR+ = 4.32; LR? = 0.22).     

Forensic Investigation of Formaldehyde in Illicit Products for Hair Treatment by DAD‐HPLC: A Case Study

The illegal use of formalin (commercial formaldehyde) in cosmetic products harms the health of individuals exposed to this substance. Over the last years, the commercial availability of these products, especially those containing irregular dosage of formaldehyde, has increased in Brazil. This work analyzes some products for hair treatment available in the Brazilian market and verifies their safety. The adopted analytical methodology involved sample derivatization with 2,4‐dinitrophenylhydrazine, followed by high‐performance liquid chromatography with ultraviolet detection (UV–VIS) at λ = 365 nm. The limit of quantification is 2.5 × 10^?3% w/w, and the recovery tests were around 93%. Some of the samples contained high and illegal formaldehyde levels ranging from 9% to 19% (w/w) and others presented suitable concentrations of the analyte. On the basis of the results, this work discusses the efficiency and practicality of this analytical method for forensic purposes.     

Sex‐ and Size‐Related Patterns of Carrion Visitation in Necrodes littoralis (Coleoptera: Silphidae) and Creophilus maxillosus (Coleoptera: Staphylinidae)

The estimation of postmortem interval (PMI) based on successional patterns of adult insects is largely limited, due to the lack of potential PMI markers. Sex and size of adult insects could be easily used for such estimation. In this study, sex‐ and size‐related patterns of carrion attendance by adult insects were analyzed in Necrodes littoralis (Coleoptera: Silphidae) and Creophilus maxillosus (Coleoptera: Staphylinidae). For both species, abundance of males and females changed similarly during decomposition. A slightly female‐biased sex ratio was recorded in N. littoralis. Females of N. littoralis started visiting carcasses, on average, one day earlier than males. There was a rise in size of males of N. littoralis at the end of decomposition, whereas for females of both species and males of C. maxillosus, no size‐related patterns of carrion visitation were found. Current results demonstrate that size and sex of adult carrion beetles are poor indicators of PMI.     

Fourier transform infrared reflectance spectra of latent fingerprints: a biometric gauge for the age of an individual

To determine if changes in fingerprint infrared spectra linear with age can be found, partial least squares (PLS1) regression of 155 fingerprint infrared spectra against the person's age was constructed. The regression produced a linear model of age as a function of spectrum with a root mean square error of calibration of less than 4 years, showing an inflection at about 25 years of age. The spectral ranges emphasized by the regression do not correspond to the highest concentration constituents of the fingerprints. Separate linear regression models for old and young people can be constructed with even more statistical rigor. The success of the regression demonstrates that a combination of constituents can be found that changes linearly with age, with a significant shift around puberty.     

Solving Double‐Sided Puzzles: Automated Assembly of Torn‐up Banknotes Evidence

Reconstruction of 2D object is a problem concerning many different fields such as forensics science, archiving, and banking. In the literature, it is considered as one‐sided puzzle problem. But this study handles torn banknotes as a double‐sided puzzle problem for the first time. In addition to that, a new dataset (ToB) is created for solving this problem. A selection approach based on the Borda count method is adopted in order to make the right decision as to which keypoint‐based method is to be used in the proposed reconstruction system. The selection approach was determined the Accelerated‐KAZE (AKAZE) as the most successful keypoint‐based method. This study also proposes new measures determining the success ratio of the reconstructed banknotes and calculating their loss ratio. When the torn banknotes were reconstructed with the AKAZE‐based reconstruction system, the average success rate was calculated as 95.55% by the proposed metric.     

Drug Recognition Evaluation and Chemical Confirmation of a 25C‐NBOMe‐Impaired Driver

This case report details an individual arrested for drug‐impaired driving after leaving the scene of multiple motor vehicle collisions and evading police. The driver was examined by a drug recognition expert and failed the drug recognition evaluation. The driver admitted to using cocaine, marijuana, an antidepressant medication and “N‐bomb,” a novel psychoactive substance that possesses hallucinogenic properties. Toxicological analyses at the Centre of Forensic Sciences’ Toronto laboratory revealed only the substance 2‐[4‐chloro‐2,5‐dimethoxyphenyl]‐N‐[(2‐methoxyphenyl)methyl]ethanamine (25C‐NBOMe) in the accused's urine. This is the first report in which 25C‐NBOMe was identified through DRE and toxicological analyses in a drug‐impaired driver.     

Forensic Paleontology: A Tool for “Intelligence” and Investigation

Paleontology and facies analysis proved to be useful tools in activities of intelligence and investigation on some criminal cases, as well as in in‐court activities, thus defining the “forensic paleontology” area of study. The definition was given by analyzing its possible specific applications and excluding some marginal activities. The reliability of forensic paleontology was then assessed in light of the results achieved in some actual cases and in an ad hoc simulation. The investigated cases concerned intelligence and ordinary law enforcement activities. Special attention was paid to crimes against the cultural heritage. Ex post re‐examination of the cases substantiated the value of this scientific branch in investigations, while stressing the possible difficulties in explaining its results to lay persons. Therefore, careful preparation of technical and linguistic preliminary notes for judges, prosecutors, and lawyers as well as a special training for consultants are recommended before presenting results as exhibits in in‐court cross‐examinations.     

Specificity,Sensitivity, and Operability of RSID™‐Urine for Forensic Identification of Urine: Comparison with ELISA for Tamm‐Horsfall Protein

Abstract: In this study, the specificity, sensitivity, and operability of RSID?‐Urine, a new immunochromatographic test for urine identification, was evaluated and compared with ELISA detection of Tamm‐Horsfall protein (THP). Urine was successfully identified among other body fluids using RSID?‐Urine and ELISA detection of THP. The detection limit of RSID?‐Urine equated to 0.5 μL of urine; although the sensitivity of RSID?‐Urine may be lower than that of ELISA detection of THP, it is thought to be sufficient for application to casework samples. However, results from RSID?‐Urine must be interpreted with caution when the sample may have been contaminated with blood or vaginal fluid, because this might inhibit urine detection. The RSID?‐Urine assay can be performed in just 15 min by dropping the extracted sample onto the test cassette. Therefore, RSID?‐Urine should be an effective tool for the forensic identification of urine, in addition to ELISA detection of THP.     

The Use of Scale‐Invariance Feature Transform Approach to Recognize and Retrieve Incomplete Shoeprints

Shoeprints left at the crime scene provide valuable information in criminal investigation due to the distinctive patterns in the sole. Those shoeprints are often incomplete and noisy. In this study, scale‐invariance feature transform is proposed and evaluated for recognition and retrieval of partial and noisy shoeprint images. The proposed method first constructs different scale spaces to detect local extrema in the underlying shoeprint images. Those local extrema are considered as useful key points in the image. Next, the features of those key points are extracted to represent their local patterns around key points. Then, the system computes the cross‐correlation between the query image and each shoeprint image in the database. Experimental results show that full‐size prints and prints from the toe area perform best among all shoeprints. Furthermore, this system also demonstrates its robustness against noise because there is a very slight difference in comparison between original shoeprints and noisy shoeprints.