Characteristics of erasable ball point pens

In 1979 shortly after the introduction of the erasable ball point pen two papers were published describing its basic characteristics (W.J. Flynn, J. Police Sci. Adm., 7 (1979) 346–349; P. Pfefferli and J. Mathyer, Rev. Int. Criminol. Police Tech., (1979) 407–419). Since that time two additional makes of pens and other colors of ink have been introduced, and the quality of writing has been significantly improved.The ink of the erasable pen differs significantly from that of the standard ball point pen, and for that matter from ink of all other modern day pens. In what way might this newer pen produce a written line different from other ball point pens? This is one question that the paper addresses with limited success.When erased, what techniques can be used to attempt to determine the text of the original writing? The writer considers all standard methods for deciphering erased writing and discusses modification by use of infrared film with oblique light photography — the method most successful in determining the original contents of the erasure.     

A comparison of the use of visible microspectrometry and high performance thin layer chromatography for the discrimination of aqueous inks used in porous tip and roller ball pens

Ink lines made by porous tip and roller ball pens have been examined by high performance thin layer chromatography (HPTLC) and by transmission microspectrophotometry (VM) in the visible region. Better discrimination between apparently similar coloured inks was obtained with HPTLC but VM has value as an additional technique for ink examination.     

滚珠型签字笔笔痕特征的实验研究

目的归纳总结滚珠型签字笔笔痕特征的分类,为笔迹鉴定人正确使用此类笔迹特征提供科学的参考依据。方法本研究采用科学实验的方法,对20人使用不同品牌的三支签字笔书写的笔迹进行了观察与分析。结果同一人使用不同的签字笔、不同人使用同一支签字笔和不同人使用不同的签字笔书写所形成的笔痕现象具有相同的表现。结论签字笔笔痕特征只是众多笔迹特征当中的一种,不能单独依据此类特征出具鉴定结论。     

Characterization and dating of blue ballpoint pen inks using principal component analysis of UV-Vis absorption spectra, IR spectroscopy, and HPTLC

The ink of pens and ink extracted from lines on white photocopier paper of 10 blue ballpoint pens were subjected to ultraviolet-visible (UV-Vis) spectroscopy, infrared (IR), and high-performance thin-layer liquid chromatography (HPTLC). The R(f) values and color tones of the bands separated by thin-layer chromatography (TLC) analysis used to classify the writing inks into three groups. The principal component analysis (PCA) investigates the pen responsible for a piece of writing, and how time affects spectroscopy of written ink. PCA can differentiate between pen ink and ink line indicates the influence of solvent extraction process on the results. The PCA loadings are useful in individualization of a questioned ink from a database. The PCA of ink lines extracted at different times can be used to estimate the time at which a questioned document was written. The results proved that the UV-Vis spectra are effective tool to separate blue ballpoint pen ink in most cases rather than IR and HPTLC.     

An examination of the sequence of intersecting lines using attenuated total reflectance-Fourier transform infrared spectral imaging

In this study, the potential of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectral imaging as a technique to determine the sequence of line crossings was examined. The technique was successful in determining the sequence of heterogeneous line intersections produced using ballpoint pens and laser printers. By imaging at characteristic frequencies, it was possible to form spectral images showing the spatial distribution of the materials. By examining the spectral images from the inks, it was possible to determine whether the ink was above or below the toner. In blind testing, ATR-FTIR spectral imaging results were directly compared to those obtained by eight experienced forensic document examiners using methods regularly employed in casework. ATR-FTIR spectral imaging was shown to achieve a 100% success rate in the blind tests, whereas some incorrect sequence determinations were made by the forensic document examiners when using traditional techniques. The technique was unable to image ink-jet printing, gel pens, roller ball pens, and felt-tip pens, and was also unable to determine the sequence of intersecting ballpoint pen lines.     

Does ink age inside of a pen cartridge?

In questioned document examination and ink dating, it has been assumed that the ink inside of a pen cartridge does not begin aging until the ink is dispensed onto paper. Positive ion laser desorption (LD) mass spectra were obtained of ink-on-paper samples containing methyl violet, from new and old pens. Mass spectral studies with methyl violet have established the mechanism for how the dye degrades over time, and have provided structural information concerning the dye's degradation products. This information was used as an indication of the relative age of ink on paper. The LD mass spectrum of the ink from a new pen was indicative of "new" ink, whereas the spectra of the ink found in some older pens may appear to be either new or old. The ink from most of the old pens studied appears not to have aged, supporting the common assumption, whereas other ink samples produced "aged" ink spectra, suggesting otherwise.     

An Examination of the Sequence of Intersecting Lines using Microspectrophotometry

The potential of microspectrophotometry as a technique to determine the sequence of intersecting lines was examined. The technique was used to determine the sequence of heterogeneous line intersections produced using inkpad, stamp‐pad ink and ballpoint pens, gel pens, fountain pens, laser and ink‐jet printers. The study was carried out with an assumption that the peak characteristics of spectra from the point of intersection should correspond to the peak characteristics of pure ink which was executed later. According to spectral reflectance curves, microspectrophotometry was possible to determine whether the ink was above or below the inkpad/stamp‐pad ink seals. In blind testing, microspectrophotometry technique results were directly compared to those obtained by five experienced forensic document examiners using optical microscopy regularly employed in casework. As the results obtained from the study were positive, microspectrophotometry technique was found to be very successful in determining the sequence of heterogeneous line intersections under some conditions.     

TDS-GC/MS法检测黑色中性笔墨迹中挥发性溶剂的历时性变化

目的 应用热脱附-气相色谱/质谱(TDS-GC/MS)分析,研究7支黑色中性笔墨迹中挥发性溶剂的历时性变化规律.方法 选取7支不同品牌的黑色中性笔,分别在A4纸和笔记本上进行一次制样,然后在不同时间点取样,应用所建TDS-GC/MS方法分析墨迹中乙二醇、二甘醇和三甘醇在200余天内的含量变化.结果 6支笔中的乙二醇、三...     

Study on the Method Used to Display Self‐fading Lines and Erasable Lines

Two new kinds of writing tools are popular in China's market. One is a self‐fading pen, and another is an erasable pen. The ink of the two kinds of writing tools has a remarkable characteristic that it can gradually fade or disappear under heat or be rubbed off. How to reveal the disappeared written lines is a very important question for document examiners. In this article, three series of ink line samples were made with five types of self‐fading pens, 18 types of erasable pens, and three types of papers. Temperature, humidity, and lighting are known as influential factors of the process, and the effect of fading was examined. Luminescence, ultraviolet (UV), sidelight, electrostatic indentation development,low temperature, and solution revealing methods are found to be effective methods used to reveal the disappeared written lines. The best operating conditions for each method were obtained from the conducted experiments.     

拉曼光谱成像技术检验朱墨时序中书写笔种类对检验结果的影响研究

目的考察在运用拉曼光谱阵列面扫描检验朱墨时序的方法中书写笔油墨种类对检验结果的影响。方法根据拉曼谱图的不同对搜集的188种书写笔（包括22种黑色圆珠笔,62种蓝色圆珠笔,62种黑色签字笔,42种蓝色签字笔）进行扫描并分类,采用拉曼光谱阵列面扫描技术对书写笔与同一印泥和印油形成的朱墨时序样本进行检验。结果 188种书写笔被分为4大类23小类,4类书写笔与印泥或印油形成的朱墨时序样本都得到了较好的检验结果。结论在本实验条件下,书写笔油墨种类对拉曼光谱阵列面扫描检验朱墨时序的检验结果没有影响。     

Classification and individualization of black ballpoint pen inks using principal component analysis of UV-vis absorption spectra

The technique of principal component analysis has been applied to the UV-vis spectra of inks obtained from a wide range of black ballpoint pens available in the UK market. Both the pen ink and material extracted from the ink line on paper have been examined. Here, principal component analysis characterised each spectrum within a group through the numerical loadings attached to the first few principal components. Analysis of the spectra from multiple measurements on the same brand of pen showed excellent reproducibility and clear discrimination between inks that was supported by statistical analysis. Indeed it was possible to discriminate between the pen ink and the ink line from all brands examined in this way, suggesting that the solvent extraction process may have an influence on these results. For the complete set of 25 pens, interpretation of the loadings for the first few principal components showed that both the pen inks and the extracted ink lines may be classified in an objective manner and in agreement with the results of parallel thin layer chromatography studies. Within each class almost all inks could be individualised. Further work has shown that principal component analysis may be used to identify a particular ink from a database of reference UV-vis spectra and a strategy for developing this approach is suggested.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

Differentiation of blue ballpoint pen inks by positive and negative mode LDI-MS

Usually, the differentiation of inks on questioned documents is carried out by optical methods and thin layer chromatography (TLC). Therefore, spectrometric methods were also proposed in forensic literature for the analysis of dyes. Between these techniques, laser desorption/ionization mass spectrometry (LDI-MS) has demonstrated a great versatility thanks to its sensitivity to blue ballpoint ink dyes and minimal sample destruction. Previous researches concentrated mostly on the LDI-MS positive mode and have shown that this analytical tool offers higher discrimination power than high performance TLC (HPTLC) for the differentiation of blue ballpoint inks. Although LDI-MS negative mode has already been applied in numerous forensic domains like the studies of works of art, automotive paints or rollerball pens, its potential for the discrimination of ballpoint pens was never studied before. The aim of the present paper is therefore to evaluate its potential for the discrimination of blue ballpoint inks. After optimization of the method, ink entries from 33 blue ballpoint pens were analyzed directly on paper in both positive and negative modes by LDI-MS. Several cationic and anionic ink components were identified in inks; therefore, pens were classified and compared according to their formulations. Results show that additional information provided by anionic dyes and pigments significantly increases the discrimination power of positive mode. In fact, it was demonstrated that classifications obtained by the two modes were, to some extent, complementary (i.e., inks with specific cationic dyes not necessarily contained the same anionic components).     

Experimental Research on Class Identification with a New Type of Erasable Gel Pens

A new type of erasable gel pen ink is becoming increasingly popular because of the modifiable characteristics for writing on documents. This study attempts to distinguish 12 types of blue and black erasable gel pens produced by mainstream stationery manufacturers using infrared (IR) visual analysis, Fourier transform infrared (FTIR) analysis, fluorescence analysis, and microspectrophotometry. The results demonstrate that IR visual, FTIR, and fluorescence analysis can be used to help distinguish each type of erasable gel ink. While microspectrophotometry can be used to effectively differentiate the blue gel inks in this study, there are limitations with respect to distinguishing black erasable gel pens. When these four optical analyses methods were used in combination, the gel inks could be accurately distinguished.     

Characterization of ballpoint pen inks by thermal and desorption and gas chromatography-mass spectrometry

The characterization of ink on paper is of importance for dating and comparing questioned ink entries in forensic document examination. Inks are commonly characterized by their colorant profile that is identified by well-established analytical methods. Numerous ink formulations show identical colorant profiles, though. In order to differentiate inks that are not distinguishable by colorant analysis, a method for the characterization of colorless ink ingredients, namely binders, solvents and additives is necessary. In this paper, we propose a technique for the analysis of colorless compounds in ballpoint inks using direct thermal desorption of the ink on paper followed by chemical analysis of the desorbed volatile compounds by gas chromatography-mass spectrometry. As compared to liquid extraction and subsequent analysis of the extracts, the technique avoids possible contamination risks. Sensitivity is very high due to the enrichment of volatile components by thermal desorption. Even from old samples, the chromatograms obtained by the method enable the determination of binder polymers, solvents and additives. Pure binders as used by ink manufacturers were analyzed for unambiguous assignment of analytical results to specific polymers. To prove the practical applicability, we analyzed 121 ballpoint pens, not all having the same colorant profile, and grouped the pens into resin and solvent categories.     

Examination of heterogeneous crossing sequences between toner and rollerball pen strokes by digital microscopy and 3-D laser profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner.     

Identification of colorants in pigmented pen inks by laser desorption mass spectrometry

Pigments are rapidly replacing dyes as colorants in pen and printer inks, due to their superior colors and stability. Unfortunately, tools commonly used in questioned document examination for analyzing pen inks, such as TLC, cannot be used for the analysis of insoluble pigments on paper. Laser desorption mass spectrometry is demonstrated here as a tool for analyzing pigment-based pen inks. A pulsed nitrogen laser can be focused onto a pen stroke from a pigmented ink pen on paper, and positive and negative ions representative of the pigment can be generated for subsequent mass spectrometric analysis. Targeted pens for this work were a set of Uni-ball 207 pigmented ink pens containing blue, light blue, orange, green, violet, red, pink, and black inks. Copper phthalocyanine was identified as the pigment used to make both blue inks. A mixture of halogenated copper phthalocyanines were identified in the green ink. Unexpectedly, the pink ink was found to contain a red pigment, Pigment Red 12, treated with a mixture of water-soluble dyes. Each sample yielded ions representative of the pigments present.     

Differentiation of black gel inks using optical and chemical techniques

Gel ink pens have become a common writing instrument in the United States. Questioned document examiners often attempt to optically differentiate gel inks from each other and from other non-ballpoint ink writings (e.g., those from roller-ball pens). Since early formulations were primarily pigment-based, they do not elute when analyzed by thin-layer chromatography. However, recent gel ink formulations (i.e., within the past five years) include dye-based inks that can be easily separated. This study differentiates black gel inks using optical and chemical techniques. The techniques include: microscopy, visible and near infrared reflectance, near infrared luminescence, thin-layer chromatography (TLC), spot tests, and gas chromatography/mass spectrometry (GC/MS). As a result of this study a flow chart has been developed allowing for a systematic determination of a questioned ink. In addition, an analysis of volatile compounds found in gel inks revealed that there are some unique ingredients that may be found in gel inks that are not typically found in other non-ballpoint inks.     

基于银胶表面增强拉曼光谱检验蓝色书写字迹初探

目的用基于银胶的表面增强拉曼光谱技术检验蓝色签字笔字迹。方法取4种常见不同牌号的蓝色签字笔在其字迹上滴加微量银胶,用显微共焦拉曼光谱仪进行检验。结果不同品牌的蓝色签字笔字迹的表面增强拉曼光谱不同。结论基于银胶的表面增强拉曼光谱技术可用于纸张上蓝色签字笔字迹的检验。     

An evaluation of matching unknown writing inks with the United States International Ink Library

Utilizing a database of standards for forensic casework is a valuable resource. Undoubtedly, as more standards (and corresponding information about the specimens) are collected, there is a greater certainty of identification when a questioned and a known item cannot be distinguished after a series of analyses. The United States Secret Service and the Internal Revenue Service National Forensic Laboratory jointly maintain the largest known forensic collection of writing inks in the world, which is comprised of over 8500 ink standards collected worldwide, dating back to the 1920s. This study was conducted to evaluate the reliability of matching arbitrarily purchased pens with known inks from a database. One hundred pens were randomly obtained from a variety of sources and their respective ink compositions were compared with standards. Eighty-five of the inks were determined to be suitable for comparison utilizing optical examinations and thin-layer chromatography. Three of the inks did not match any of the specimens on record; one of these inks was similar to an ink from an identical brand of pen that was in the database, but had a modified formulation.