Accidental death with tear gas pen gun: a case report.

A case of accidental death resulting from a dropped tear gas pen gun is described. Tear gas pen guns can be easily altered to fire regular ammunition and can accommodate a variety of ammunition. Other similar pocket-sized weapons are mentioned.     

From the Instrument of Delivery to the Actual Agent of Harm: Fighting the Criminal Purchase of Ammunition

The illegal trade in ammunition in the Netherlands seems to be a small-scale problem. However, as a result of high profits and a small chance of being caught, it is an extremely attractive criminal activity for malicious individuals. The criminal purchase of ammunition is facilitated by weaknesses in the logistic supply chain for legal ammunition, current legislation on the purchase, possession, transport and use of ammunition and the inadequacy with which Dutch government agencies enforce the laws. The fight against the criminal purchase of ammunition could benefit from the adoption of an automated registration system by arms dealers, the use of a different type of freighting method for legal ammunition transport and a common approach by European law enforcement agencies.     

A new type of shotgun ammunition produces unique wound characteristics

The Tucson Police Department, Tucson, AZ, has begun using the Polyshok Impact Reactive Projectile (IRP), a new type of shotgun ammunition that includes a lead bead core that travels within single, plastic-encased projectile. On impact, the core is released to distribute over a small area, thereby disintegrating on impact to reduce the likelihood of exit or collateral damage on missed shots. After a brief review of shotgun slug ballistics and wound characteristics and a discussion of the mechanism of the Polyshok IRP, we report the first death in the United States from this ammunition. Findings included a single entrance wound with plastic ammunition components and small lead particles recovered from the body, the combination of which normally would suggest a close-range shooting with birdshot. However, the characteristics of this ammunition create different patterns than are found with slugs or shot, so that a medical examiner unfamiliar with the Polyshok IRP could draw inaccurate conclusions about ammunition and range of fire. Because the single projectile fired from this ammunition is composed of both plastic and lead, plastic components are likely to be found within the wound at any range of fire, unlike traditional shot or slug ammunition. Also, the small size of lead particles found spread through the wound cavity would ordinarily suggest a small-size shot, whereas the external appearance of the wound (a single entrance with no dispersion of shot) and the pattern of tissue destruction are more consistent with the patterns of injury associated with shotgun slugs.     

Suicidal contact gunshot wounds to the head with .38 Special Glaser Safety Slug ammunition

Glaser Safety Slug TM ammunition is a uniquely designed, essentially prefragmented ammunition. Tests performed by the U.S. Justice Department demonstrated that the ammunition possesses high kinetic energy, high relative incapacitation index (RII) and poses a very low risk to bystanders because of its total loss of kinetic energy in the target. Despite having been manufactured since 1974, no deaths from this ammunition have been previously reported. The authors herein describe the first three reported human deaths.     

The identification of two unusual types of homemade ammunition

Illegal homemade ammunition is commonly used by criminals to commit crimes in Taiwan. Two unusual types of homemade ammunition that most closely resembling genuine ammunition are studied here. Their genuine counterparts are studied as the control samples for the purpose of comparison. Unfired ammunition is disassembled, and the morphological, dimensional, and compositional features of the bullet and cartridge case are examined. Statistical tests are employed to distinguish the dimensional differences between homemade and genuine ammunitions. Manufacturing marks on head stamps of the cartridge case are carefully examined. Compositional features of propellant powders, primer mixtures, and gunshot residues are also analyzed. The results reveal that the morphological, dimensional, and compositional features of major parts of the ammunition can be employed to differentiate homemade cartridges from genuine ones. Among these features, tool marks on the head stamps left by the bunter can be used to trace the origin of ammunition.     

Short-stop ammunition

Now and again ammunition is offered emphasizing its "less deadly" or "not at all deadly" effects. On application, however, these types of ammunition contrary to the manufacturer's allegations turn out to be a real threat. On the one hand results can be rather harmful while on the other side at court a remonstration on the grounds of not knowing such outcome beforehand may be successful. Under these aspects construction and effects of a special small shot ammunition for revolvers (Speer 38/357 Shot Shells, manufactured by CCI), of the cartridge "Short-Stop", manufactured by MB Associates in San Ramon (California) and, in connexion with own casework, a "shock-defense" sort of ammunition, manufactured by Rauchalles (Offenburg, West Germany) are compared and discussed with respect to their construction and effects.     

Evaluation of the possibility of differentiation between various types of ammunition by means of GSR examination with SEM-EDX method.

Gunshot residues originating from six types of pistol ammunition were studied. Six persons who normally have no contact with weapons fired three times, each person from a different pistol. Samples of gunshot residues were collected from the shooters' hands using aluminium stubs with black carbon adhesive tabs and subjected to examinations of their morphology and elemental content by means of a scanning electron microscope with an energy dispersive X-ray spectrometer in an automatic manner. In a comparative study of the samples, only primer residues were taken into account. The frequency of occurrence of particles representing a certain chemical class against the total number of detected particles was expressed as a percentage. Mutual relations between the frequencies of occurrence of the residues of particular chemical content were found to be different for most of the studied ammunition types using a non-statistical approach--and by means of non-parametric statistical methods (R-Spearman and tau-Kendall correlation coefficients), it was possible to differentiate one ammunition type from each of the other ammunition types examined. The performed examinations have revealed some differences in the frequencies of occurrence of certain chemical classes of primer residues, observed for various types of ammunition. These differences could constitute a valuable contribution to group identifications of ammunition made on the basis of physical and chemical examinations of gunshot residues.     

Elemental Characterization and Discrimination of Nontoxic Ammunition Using Scanning Electron Microscopy with Energy Dispersive X‐Ray Analysis and Principal Components Analysis

Concerns over the toxic by‐products produced by traditional ammunition have led to an increase in popularity of nontoxic ammunition. In this work, the chemical composition of six brands of nontoxic ammunition was investigated and compared to that of a road flare, which served as an environmental source with similar composition. Five rounds of each brand were fired while a further five were disassembled and the primer alone was fired. Particles collected from all samples, including the road flare, were analyzed by scanning electron microscopy with energy dispersive X‐ray analysis. Common elements among the different ammunition brands included aluminum, potassium, silicon, calcium, and strontium. Spectra were then subjected to principal components analysis in which association of the primer to the intact ammunition sample was generally possible, with distinction among brands and from the road flare sample. Further, PCA loadings plots indicated the elements responsible for the association and discrimination observed.     

A comparative study of gunshot residue originating from 9 mm Luger ammunition from various producers

Following previous work on differentiation between gunshot residue according to the type of ammunition used, a specific investigation was undertaken of traces originating from 9 mm Luger ammunition using SEM-EDX. The aim of this study was to determine whether GSR originating from this type of ammunition is similar, or whether differentiation could be made between particular manufacturers of Luger ammunition. The results were collected in the form of counts of particles in each of seven key elemental classes being combinations of lead, antimony and barium. These were then adjusted to a factor known as frequency of occurrence which allows comparison of the distribution of particles within the classes between samples with differences in absolute particle counts. The relationships between the samples were examined using non-parametric statistical tests: R-Spearman and tau-Kendall rank correlation coefficients. It has been found that most of the studied samples of GSR were similar to each other despite their originating from various manufacturers.     

Two simultaneous suicidal gunshots to the head with robbed police guns

The suicidal infliction of two gunshot wounds to the head represents a critical issue for medicolegal investigation. In principle, simultaneous infliction with two firearms or third parties' involvement, i.e. two consecutive gunshots, have to be considered. We report for the first time on a case of suicidal infliction of two simultaneous gunshots to the head (oral, temporal) with Action 4 expanding ammunition. A male had robbed two service guns and committed suicide thereafter under the influence of high-dose alcohol and cocaine. Interestingly, Action 4 ammunition had been used, leading to an uncommon gunshot wound morphology and extensive backspatter. At the scene, these findings caused confusion; moreover, the number of gunshot wounds was unclear, until autopsy revealed two gunshot wounds to the head, which had obviously been inflicted simultaneously. Expanding ammunition like QD-PEP and Action 4, used by several German federal state police forces, can cause an atypical gunshot wound morphology, most probably due to its peculiar deformation behaviour. Investigators should be careful when interpreting gunshot wound morphology at the scene after usage of such expanding ammunition. With regard to reconstruction in cases of two gunshot wounds to the head and two guns at the scene, two simultaneous gunshots should be taken into consideration.     

Comparison of GSR Composition Occurring at Different Locations Around the Firing Position

Abstract: Variations in gunshot residue (GSR) compositions are used in the reconstruction of shooting incidents. In this study, GSR samples taken from seven different locations around and in the firearm were collected and analyzed using scanning electron microscopy/energy dispersive X‐ray analysis. Four different types of ammunition were applied. Very low correlations were found when different ammunition were used. This clearly shows that it is possible to differentiate between ammunition types. When the same ammunition was used, high correlations were found between samples taken from external positions (such as hands of shooter, bullet‐entrance holes) but poor correlation was found between internal samples (such as firearm barrel, cartridge case) and external samples. A high degree of association was found between samples that simulated victim and shooter. These findings clearly demonstrate that GSR comparison studies are meaningful but care needs to be taken when choosing suitable exhibits. External samples (such as hands of shooter, bullet‐entrance holes) are more suitable candidates than internal samples (barrel of the firearm, cartridge case).     

监狱监管安全事故的综合测定研究——监管安全事故的月度实发指数的编制

首先在阐述编制事故实发指数意义的基础上,给出实发指数的数学定义及其多角度评估监管安全整体状况的作用;其次就编制实发指数的具体统计技术进行较为详尽的介绍,包括监管安全事故的界定与数据采集、事故类型与级别区分、数据的整理描述、事故分值的汇总、事故的季节变动分析、各种实发指数的编制与实证;最后指明建设监管安全预警系统的路径.     

Application of lead isotope analysis in shooting incident investigations

A study was conducted to examine the potential of the considerable variability of the lead isotope compositions in bullets (projectiles) and primers in shooting incident investigations. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICP/MS) was used to analyze lead isotopic compositions in projectiles, cartridge cases, firearms discharge residues (FDR) in barrels of firearms and in the gunshot entries. .22 caliber plain lead and plated ammunition and 9 mm Luger full metal jacket (FMJ) ammunition were employed in shooting experiments using semiautomatic pistols. Cotton cloth served as the target material and two firing distances were tested; 1 cm (near contact) and 2 m distances. It was observed that various mechanical or chemical means of cleaning do not completely remove lead deposits ("lead memory") from barrels of firearms. Nonetheless, it was shown that analysis of lead isotopic composition may provide valuable evidence in investigating specific scenarios of shooting incidents. For instance in a shoot-out where several firearms and ammunition brands are involved, it may be feasible to point out which ammunition and/or firearm caused a particular gunshot entry if the ammunition brands involved (bullets and primers) differ considerably in their lead isotopic composition.     

An investigation of two methods of DNA recovery from fired and unfired 9 mm ammunition

Cartridge cases are often recovered from crime scenes involving firearms and, in the United Kingdom (where gun possession is strictly controlled), these are commonly from 9 mm calibre ammunition. The ability to obtain informative DNA profiles from touch DNA on recovered cartridges could have a significant impact on the investigation of that type of offence. However, this avenue may not be routinely considered as investigators in the UK have historically had a low expectation of obtaining useful DNA profiles. This stance may not be unreasonable given that (a) only trace amounts of DNA are likely to have been transferred onto the cartridge cases through handling; and (b) when the cartridge is spent, the potential deterioration of that DNA caused by the act of discharging the weapon.We introduce a novel semi-automatable method using direct lysis for the recovery of DNA from ammunition and compare it with a traditional double-swabbing method (using wet and dry swabs). DNA profiling of the DNA recovered using both methods was carried out using the ESI17 FAST STR system (Promega). This demonstrated a significant increase in DNA recovery using the direct lysis approach, and correspondingly improved STR results.We also investigated the effect on the recovery and profiling of DNA from fired, and unfired, 9 mm cartridges using the direct lysis technique. These results demonstrate that DNA suitable for STR analysis can still be recovered from fired ammunition with only slightly reduced yields compared to unfired ammunition. In these experiments, the handler of the ammunition was most commonly either the sole contributor or the major contributor to the recovered DNA profile.     

Characterisation of gunshot residue from three ammunition types using suppressed anion exchange chromatography

Gunshot residue (GSR) is commonly analysed in forensic casework using either scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) or gas chromatography-mass spectrometry (GC-MS). Relatively little work has been reported on the post-discharge GSR content of non-metallic inorganic or low molecular weight organic anions to distinguish between different ammunition types. The development of an analytical method using suppressed micro-bore anion exchange chromatography (IC) is presented for the analysis of GSR. A hydroxide gradient was optimised for the separation of 19 forensically relevant organic and inorganic anions in <23min and sensitivities of the order of 0.12-3.52ng of anion detected for all species were achieved. Along with an optimised extraction procedure, this method was applied to the analysis of post-ignition residues from three selected ammunition types. By profiling and comparing the anionic content in each ammunition residue, the possibility to distinguish between each type using their anionic profiles and absolute weight is presented. The potential for interference is also discussed with respect to sample types which are typically problematic in the analysis of GSR using SEM-EDX and GC-MS. To the best of our knowledge this represents the first study on the analysis of inorganic anions in GSR using suppressed ion chromatography.     

Time periods of GSR particles deposition after discharge-final results

The elemental objects of the research study are: determination of time periods corresponding to gunshot residue particles (GSR) deposition after the shot from selected pistols and a revolver, and evaluation of the deposited particles number. For several shooting experiments were used a pistol CZ model 85, caliber 9 mm Luger with common ammunition 9 mm Luger FMJ Sellier & Bellot, a pistol CZ model 70, caliber 7.65 mm Browning (32 ACP) with common 7.65 mm Browning FMJ Sellier & Bellot ammunition and a revolver S&W Modell 60, barell length 2-1/8', cal. .38 Special with common Sellier&Bellot (FMJ) ammunition. The results of the study have indicated the behavior of GSR particles deposited after a single discharge. The overall time interval of GSR particles deposition and the number of deposited particles with the above mentioned arms and ammunition were established. The results can potentially be used for clarifying the situation at crime scenes and for subsequent interpretation of GSR evidential value in caseworks.     

Fate and Behavior of Gunshot Residue—A Review

A review of the literature concerning the fate and behavior of gunshot residue (GSR) is presented. A number of concomitant parameters including firearm and ammunition type, plume and GSR material characteristics, travel distances, chemical composition and GSR morphology are critically discussed in relation to their effects on the distribution and deposition, transfer and persistence processes of GSR. The underlying mechanisms associated with such processes are also considered. Knowledge of these processes on GSR materials could provide valuable information concerning scene preservation and subsequent forensic sampling. The number of GSR particles deposited can vary significantly with each firearm discharge, highlighting the potential to produce distinctive data in each individual case. With the continual development and compositional changes of new ammunition types, further evaluation of the effect these processes may have on GSR evidence and their possible influence on the interpretation of the analytical results should be given due consideration.     

Case report of a homicide by a shotgun loaded with unusual ammunition

Reported is the case of a man killed by a neighbor with a shotgun loaded with a unusual ammunition. The cartridge contained several shots chained together by metallic wires. Such ammunition has been used for hunting purposes but is now banned, so it can be handmade only. The joined pellets produce a wound with features that are different from those of a wound made by a regular load of pellets. Several interpretive problems are caused by the unknown number of pellets contained in the shell and the effects of the wire holding the shot together.     

Arms Prices and Conflict Onset: Insights from Lebanon and Syria

What drives the prices of arms and ammunition sold at illicit markets? Do the prices of illegal arms soar during episodes of marked insecurity, such as conflict onset? This article seeks to advance knowledge on the dynamics and determinants of weapons prices through the quantitative analysis of illicit arms market price data in Lebanon for the period February 2011 to September 2012. The article also examines the relationship between arms and ammunition prices in Lebanon, and reported conflict fatalities in Syria, as the period under study overlapped with the onset of conflict in the latter country. Key results include strong, statistically-significant correlations between the prices of arms and the prices of ammunition in Lebanon, as well as between the prices of arms and ammunition in Lebanon and reported conflict fatalities in neighbouring Syria. These findings highlight the value of monitoring illicit arms market prices, including prices for a diverse range of weapons and ammunition, to improve our understanding of both illicit markets and conflict dynamics. The strong correlations observed in the article also suggest that crowdsourcing methodologies used by organisations monitoring killings during the Syrian conflict can effectively capture variations in conflict intensity over time.     

The specificity of gunshot wounds caused by rubber buck shot

Described in the paper are forensic-medical cases related with examinations of wounds inflicted by rubber case-shot--a relatively rare ammunition. The morphology of the above wounds and specific features of deposition of "shot metals" in the damaged region were studied. The possibilities of fixing a shot distance and ammunition type were defined.