An Examination of the Sequence of Intersecting Lines using Microspectrophotometry

The potential of microspectrophotometry as a technique to determine the sequence of intersecting lines was examined. The technique was used to determine the sequence of heterogeneous line intersections produced using inkpad, stamp‐pad ink and ballpoint pens, gel pens, fountain pens, laser and ink‐jet printers. The study was carried out with an assumption that the peak characteristics of spectra from the point of intersection should correspond to the peak characteristics of pure ink which was executed later. According to spectral reflectance curves, microspectrophotometry was possible to determine whether the ink was above or below the inkpad/stamp‐pad ink seals. In blind testing, microspectrophotometry technique results were directly compared to those obtained by five experienced forensic document examiners using optical microscopy regularly employed in casework. As the results obtained from the study were positive, microspectrophotometry technique was found to be very successful in determining the sequence of heterogeneous line intersections under some conditions.     

Determination of the Sequence of Intersecting Lines Between Toners and Seals by Laser Fluorescence Microscope

Fluorescence microscope is considered to be one of the most effective ways to examine the sequence of intersecting seal and toner lines of questioned documents. In reality, however, the toner (mainly divided into compact and noncompact toners) and seal of a questioned document have such a complex morphology and sequence of crossing lines that current methods cannot meet the requirement of practical document identification. In view of the challenges of document examination, a laser fluorescence microscope and method are developed in this study. The developed microscope provides additional functionality to traditional fluorescence microscopes of transmitted light modality, laser excitation, selectable excitation wavelength, and selectable fluorescence filters. The results obtained from the method of comparisons between transmitted light and fluorescence modalities were positive under most conditions, particularly for noncompact toner examination for which a 100% accuracy rate and 90% detection rate were achieved in blind testing.     

Examination of the Sequence between Laser Printing and Rollerball Pen Writing Without an Intersecting Stroke

Examining the sequences of printing and writing is a significant method of determining the authenticity and validity of documents. Forensic document examiners have extensively studied crossing lines, which has produced useful information. However, the sequence for laser printing and rollerball pen writing without crossing strokes has not been studied. To solve this problem, volunteers were invited to write characters on A4 paper with different rollerball pens using two sequences. Four laser printers applied print to these sheets, and the materials were examined using an Optem A-Zoom2 video tomography microscope. Consequently, distinguishing features were noted between the materials produced in both sequences. These features might provide a scientific basis for accurately determining the sequence between laser printing and rollerball pen writing in the absence of intersecting strokes.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

Determining Line-Crossing Sequences Between Laser Printing and Writing Pen Using Coaxial Light

Determining the application sequence of hand-written pen ink and printer toner lines has attracted significant interest in questioned document examination. This study uses coaxial light to determine line-crossing sequences, with intersections observed under a VSC600 forensic document workstation and a Leica M205A Stereo-microscope. Results show that reflected light at intersections and color contrast between intersections and nonintersections was observed when a hand-written ink line passes over a toner line, while a toner line passing over a written line appeared dull, with no color contrast. The procedure was tested under a range of conditions, such as types of writing pens and laser printers, the writer, and writing pressure, with the latter playing an important role in the evaluation. To validate the results, a 90% detection rate and 98% accuracy rate were achieved from 50 samples of blind testing, which is more effective than optical microscopy.     

Preliminary Studies on the Absorbance Ratio Method Used to Determining the Age of Stamp‐pad Ink Seal

Stamp‐pad ink seals are often placed on important documents, and determining the dating of stamp‐pad ink seal is important to assess the authenticity of a document. In this study, 20 different brands and types of stamp‐pad inks were classified by ultraviolet visible spectrophotometer. Six different brands and types of papers were classified by micro‐Fourier transform infrared spectrometer and visual spectral comparator 6000. Three different brands of stamp‐pad inks and two different types of paper were used to make diachronic samples of the seals. A method was employed to date the stamp‐pad seals by comparing absorbance ratios and inks of known age. Curves were created to show the relationship between the absorbance ratio of ink and the age of the seals. The experimental results showed that the absorbance ratio method was applicable for the relative dating of stamp‐pad ink seals in some cases where the seal was placed on the document within 10 weeks.     

系统鉴定方法在朱墨时序鉴定中的应用

朱墨时序鉴定是通过对印字交叉部位的检验,得出的印字先后顺序的判断。朱墨时序鉴定是文件鉴定的重要组成部分,它往往是判定文件物证真实性的重要依据之一。任何文件物证都是一个由多个要素组成的文件系统。通过介绍系统鉴定方法的原理、方法,以鉴定实践说明其在朱墨时序鉴定中的三种作用,同时也强调各种检验方法的综合运用。提倡在朱墨时序鉴定中,应运用系统鉴定方法,更加准确的把握印字交叉部位的表观特征,从而提高朱墨时序鉴定的准确性。     

Initial Study for the Determination of the Sequence of Intersecting Lines between Gel Pens and Seals by Optical Coherence Tomography*

Determining the sequence of intersecting lines is a significant issue in the forensic document examination that can reveal the fraud or distinguish between different allegations. Optical coherence tomography (OCT) is a high-resolution cross-sectional imaging technique that has been introduced into forensic science field recently. The potential of OCT as a novel method to determine the sequence of intersecting lines was examined for the first time. In this study, a spectral-domain OCT system with a center wavelength of 900 nm was employed to perform nondestructive examination on determining the sequence of 18 heterogeneous intersecting line samples produced using three types of gel pens and three brands of stamp pad ink seals. Two-dimensional (2D) cross-sectional, and three-dimensional (3D) volumetric images of the intersecting lines were obtained by the OCT system. Several features were noted and analyzed to successfully determine the sequence of all the 18 samples. Blind tests were also conducted to demonstrate the effectiveness of OCT technique. The results illustrate that OCT technology can provide an effective and accurate method for sequencing intersecting lines of gel pen ink and seal ink, which may complement the conventional methods used in the examination of questioned documents.     

Dating of Seals Produced with Stamp‐Pad Ink Using Gas Chromatography Method

Seals are often placed on important documents, and determining the date when a seal was affixed can be important to assess the authenticity of a document. In this study, thirty‐seven different brands of stamp‐pad inks and three different types of paper were used to make diachronic samples of the seals. The volatile components of stamp‐pad ink were determined, and the stamp‐pad ink was classified by gas chromatography with a flame ionization detector. Calibration curves were created to show the relationship between the content of volatile stamp‐pad ink components and the age of stamp‐pad ink entries stored under natural aging, UV‐induced aging, and heating aging conditions. The experimental results showed that GC was useful in the analysis of stamp‐pad ink and applicable for determining the relative age of stamp‐pad ink entries in some cases where the seal was placed on the document within 3 months.     

Dating of Inkpad Seals Using the Extraction Rate Method: Preliminary Findings

Inkpad seals are often placed on important documents, and determining the date when a seal was affixed can be important to assess the authenticity of a document. In this study, three different brands of inkpads and four different types of paper were used to make diachronic samples of the seals. A double‐solvent extraction method was employed to date the inkpad seals by comparing extraction rates with inks of known age. Cyclohexane was selected as a weak solvent, and chlorobenzene was selected as a strong solvent. After testing, curves were created to show the relationship between the extraction percentage of ink and the date of the seals. The experimental results showed that the extraction rate method was applicable for the relative dating of inkpad seals in some cases where the seal was placed on the document within 6 months.     

The Examination of Commercial Printing Defects to Assess Common Origin,Batch Variation,and Error Rate*

Abstract: The examination of printing defects, or imperfections, found on printed or copied documents has been recognized as a generally accepted approach for linking questioned documents to a common source. This research paper will highlight the results from two mutually exclusive studies. The first involved the examination and characterization of printing defects found in a controlled production run of 500,000 envelopes bearing text and images. It was concluded that printing defects are random occurrences and that morphological differences can be used to identify variations within the same production batch. The second part incorporated a blind study to assess the error rate of associating randomly selected envelopes from different retail locations to a known source. The examination was based on the comparison of printing defects in the security patterns found in some envelopes. The results demonstrated that it is possible to associate envelopes to a common origin with a 0% error rate.     

A Novel Forensic Tool for the Characterization and Comparison of Printing Ink Evidence: Development and Evaluation of a Searchable Database Using Data Fusion of Spectrochemical Methods

A searchable printing ink database was designed and validated as a tool to improve the chemical information gathered from the analysis of ink evidence. The database contains 319 samples from printing sources that represent some of the global diversity in toner, inkjet, offset, and intaglio inks. Five analytical methods were used to generate data to populate the searchable database including FTIR, SEM‐EDS, LA‐ICP‐MS, DART‐MS, and Py‐GC‐MS. The search algorithm based on partial least‐squares discriminant analysis generates a similarity “score” used for the association between similar samples. The performance of a particular analytical method to associate similar inks was found to be dependent on the ink type with LA‐ICP‐MS performing best, followed by SEM‐EDS and DART‐MS methods, while FTIR and Py‐GC‐MS were less useful in association but were still useful for classification purposes. Data fusion of data collected from two complementary methods (i.e., LA‐ICP‐MS and DART‐MS) improves the classification and association of similar inks.     

Characterization of Printing Inks Using DART‐Q‐TOF‐MS and Attenuated Total Reflectance (ATR) FTIR

The rise in improved and widely accessible printing technology has resulted in an interest to develop rapid and minimally destructive chemical analytical techniques that can characterize printing inks for forensic document analysis. Chemical characterization of printing inks allows for both discrimination of inks originating from different sources and the association of inks originating from the same source. Direct analysis in real‐time mass spectrometry (DART‐MS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) were used in tandem to analyze four different classes of printing inks: inkjets, toners, offset, and intaglio. A total of 319 samples or ~ 80 samples from each class were analyzed directly on a paper substrate using the two methods. DART‐MS was found to characterize the semi‐volatile polymeric vehicle components, while ATR‐FTIR provided chemical information associated with the bulk components of these inks. Complimentary data results in improved discrimination when both techniques are used in succession resulting in >96% discrimination for all toners, 95% for all inkjets, >92% for all offset, and >54% for all intaglio inks.     

The Capability of Raman Microspectroscopy to Differentiate Printing Inks

This study applies Raman microspectroscopy to differentiate the chemical components in printing inks of different brands, colors, and type using the 532 nm and 785 nm excitation wavelengths. Spectra were collected from 319 inks (78 inkjet, 76 toner, 79 offset, and 86 intaglio) representing various colors. Comparisons were performed to calculate discrimination capability percentages for each ink type. Overall, Raman microspectroscopy differentiates according to the following hierarchy: intaglio (96%), inkjet (92%), offset (90%), and toner (61%). The ability of Raman microspectroscopy to differentiate between same‐colored inks from different brands was dependent on the color and ink analyzed. Based on ink color, the discrimination capability ranged from 75 to 94% (inkjet), 0 to 86% (toner), and 0 to 77% (offset). Copper phthalocyanine was detected in cyan inks and various intaglio inks, while carbon black was identified in black inkjet, offset, and intaglio inks.     

竖心旁笔顺判断方法

收集150份实验笔迹样本,由书写人报告样本字中竖心旁的笔顺。实验样本中出现了3种竖心旁的笔顺,在此基础上归纳了3种笔顺的判断规则。     

Analysis of Pigmented Inkjet Printer Inks and Printed Documents by Laser Desorption/Mass Spectrometry*,†

Abstract: Anyone with a computer, scanner, and color printer has the capability for creating documents such as identification cards, passports, and counterfeit currency. Laser desorption mass spectrometry (LDMS) has been demonstrated as a powerful tool for colorant analysis. Inkjet printers are now moving largely toward the use of pigments as colorants; their insolubility makes analysis by simpler methods such as thin‐layer chromatography no longer an option. Recent developments in pigmented inkjet printer inks, such as gloss optimizers that coat pigment particles, may prohibit colorant analysis by LDMS. We demonstrate here that pigments used in inks from two Epson printers can be detected and analyzed by LDMS. Also, LDMS spectra of various colors created using a 4‐cartridge (cyan/magenta/yellow/black, CMYK) inkset are evaluated, to begin to develop an approach for unraveling LDMS data from real samples, to determine the number of inks used by a printer, and the chemical composition of the colorants.     

Determination of the sequence of intersecting lines using Focused Ion Beam/Scanning Electron Microscope

The aim of this study was to verify that the combination of focused ion beam (FIB) and scanning electron microscope/energy‐dispersive X‐ray (SEM/EDX) could be applied to determine the sequence of line crossings. The samples were transferred into FIB/SEM for FIB milling and an imaging operation. EDX was able to explore the chemical components and the corresponding elemental distribution in the intersection. The technique was successful in determining the sequence of heterogeneous line intersections produced using gel pens and red sealing ink with highest success rate (100% correctness). These observations show that the FIB/SEM was the appropriate instrument for an overall examination of document.     

An examination of the sequence of intersecting lines using attenuated total reflectance-Fourier transform infrared spectral imaging

In this study, the potential of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectral imaging as a technique to determine the sequence of line crossings was examined. The technique was successful in determining the sequence of heterogeneous line intersections produced using ballpoint pens and laser printers. By imaging at characteristic frequencies, it was possible to form spectral images showing the spatial distribution of the materials. By examining the spectral images from the inks, it was possible to determine whether the ink was above or below the toner. In blind testing, ATR-FTIR spectral imaging results were directly compared to those obtained by eight experienced forensic document examiners using methods regularly employed in casework. ATR-FTIR spectral imaging was shown to achieve a 100% success rate in the blind tests, whereas some incorrect sequence determinations were made by the forensic document examiners when using traditional techniques. The technique was unable to image ink-jet printing, gel pens, roller ball pens, and felt-tip pens, and was also unable to determine the sequence of intersecting ballpoint pen lines.     

Prepared Disappearing Ink and Deciphering of Documents

Disappearing inks can be used for forgeries in many fields. In this study, thymolphthalein indicator solution was prepared as a disappearing ink. A total of 54 different solutions containing thymolphthalein were prepared at six different concentrations and nine different pH values. Among the prepared solutions, 0.16 g/50 mL and 0.32 g/65 mL thymolphthalein at pH 14 were the optimum solutions that were not distinguishable from regular ink when applied to promissory note. Fountain pens were filled with the abovementioned ink solutions and applied to promissory notes for experimental purposes. After 40 h, ink residues were not visible on promissory notes written with the ink with the optimum pH (pH = 14) value. To decipher the entries that disappeared, an instrumental method (Video Spectral Comparator‐8000) and a chemical method (using NH₃ vapor) were used, succeeded at 0.32 g/65 mL, but failed at 0.16 g/50 mL thymolphthalein. Therefore, NH₃ had to be sprayed for 0.16 g/50 mL with negligible harm.     

无交叉笔画状态下激光打印文字与中性笔书写文字形成时序的实验研究

目的探索无交叉笔画状态下激光打印文字与中性笔书写文字的时序特征及变化规律,以求运用于案件检验。方法以两种不同时序,请5名志愿者分别执不同中性笔在120张A4纸张上书写文字,并使用4台不同型号激光打印机打印文字,再运用奥博视频层晰显微镜对实验样本进行放大观察。结果证实在两种时序条件下制作的实验样本之间存在诸多差异性特征。结论这些差异性特征为准确判定无交叉笔画状态下激光打印文字与中性笔书写文字的时序提供了基础实验依据。