In situ identification and analysis of automotive paint pigments using line segment excitation Raman spectroscopy: I. Inorganic topcoat pigments

Several applications of Raman spectroscopy in the forensic sciences have recently been demonstrated, but few have involved the analysis of paints. Undoubtedly, this is a reflection of the sample degradation problems often encountered when a visible or near-infrared laser is focused on a light-absorbing matrix. In this study, a dispersive CCD Raman spectrometer (785 nm) was used in a configuration which collected scattered light from an excitation region 3 mm long and 80 microm wide, instead of from a focused spot. Sample degradation was not observed, and Raman spectra of automotive paints of all colors were readily obtained. Most of the paints analyzed were U.S. automobile original finishes (1974 to 1989) from the Reference Collection of Automotive Paints, and the inorganic pigments examined were those which had been identified previously by infrared spectroscopy in finishes from this collection. Prominent peaks of rutile were observed in Raman spectra of light-colored nonmetallic finishes for both monocoats and basecoat/clearcoat systems, and the rutile peaks are readily distinguished from those of anatase. The lead chromates (Chrome Yellow, Molybdate Orange, and silica-encapsulated versions of the two) are the strongest Raman scatterers among the pigments examined, and Chrome Yellow was identified by Raman spectroscopy in several yellow and orange nonmetallic monocoats for which infrared absorptions of this pigment were not observed. Raman spectroscopy also provides an unequivocal means to distinguish Chrome Yellow from Molybdate Orange. This is particularly helpful for the analysis of paints containing light pigment loads or encapsulated pigments since the two formulations cannot be differentiated by infrared spectroscopy in such cases. The iron-containing pigments, ferric oxide, hydrous ferric oxide, and Prussian Blue, are relatively weak Raman scatterers, but peaks of hydrous ferric oxide and Prussian Blue were observed in spectra of paints containing heavy pigment loads. Because no sample preparation is required. Raman spectroscopy provides an excellent means to rapidly screen reference panels for the presence of certain pigments, and some examples of the differences in Raman spectra which occur for paints having similar colors are presented.     

Gold-plating of Mylar lift films to capitalize on surface enhanced Raman spectroscopy for chemical extraction of drug residues

The method of residue extraction through electrostatic lifting provides a distinctive mode of performing ultra-trace analysis. These lifts provide a medium for analyte extraction via nanomanipulation-coupled to nanospray ionization-mass spectrometry (NSI-MS). This method of extraction can be coupled to Raman spectroscopy for supplemental verification of analytes using surface enhanced Raman scattering (SERS). The gold surface used for SERS provides an enhanced effect on peak signal intensity allowing ultra-trace amounts to be detected more effectively. The aim of this research is to utilize gold-coated films with electrostatic lifting in order to collect latent materials and analyze chemicals of interest contained in them via SERS.     

Quantitative analysis of chlorpromazine by electron spin resonance (ESR) spectroscopy.

A simple and sensitive method is described for quantitative analysis of chlorpromazine in blood, serum, urine and tissue homogenate. The chlorpromazine cation radical produced by adding perchloric acid and 2,3-dichloro-5,6-dicyano-p-benzoquinone to the sample can be detected by the ESR method at room temperature. The sensitivity limit is 10 ng, that is, 20 microliters of the solution containing 0.5 microgram chlorpromazine/ml. The time needed for the measurement is within 10 min. The chlorpromazine radical thus produced is very stable; for example, 95% of the radical was observed after 24 h. The advantage of this method is discussed by comparing with the ordinary spectrophotometry which requires the purification of the sample.     

Quantitative analysis of chlorpromazine by electron spin resonance (ESR) spectroscopy

A simple and sensitive method is described for quantitative analysis of chlorpromazine in blood, serum, urine and tissue homogenate. The chlorpromazine cation radical produced by adding perchloric acid and 2,3-dichloro-5,6-dicyano-p-benzoquinone to the sample can be detected by the ESR method at room temperature. The sensitivity limit is 10 ng, that is, 20 μl of the solution containing 0.5 μg chlorpromazine/ml. The time needed for the measurement is within 10 min. The chlorpromazine radical thus produced is very stable; for example, 95% of the radical was observed after 24 h. The advantage of this method is discussed by comparing with the ordinary spectrophotometry which requires the purification of the sample.     

A market study of green spray paints by Fourier transform infrared (FTIR) and Raman spectroscopy.

A market study of 40 different green spray paints was carried out using infrared (FTIR) and Raman spectroscopy. The infrared technique distinguished between the 12 main groups based on their binder and extender composition. After visual comparison of the spectra 22 subgroups were observed. Raman spectroscopy was also carried out on the 40 reference paints in order to determine the pigment content. Analyses were undertaken using two different excitation sources: Argon ion (514.5 nm) and Helium-Neon (632.8 nm). The first generated strong fluorescence for most of the samples and created eight groups. Using the red laser, 15 classes were observed. Finally, using an analytical sequence starting with infrared spectroscopy followed by Raman Helium-Neon and then by Raman Argon laser, most of the paints were differentiated. In this study infrared and Raman spectroscopy complemented each other. FTIR supplied information about the binder and some extenders, and Raman provided information on the main organic pigments present.     

Identification and quantitation of gamma-hydroxybutyrate (NaGHB) by nuclear magnetic resonance spectroscopy

The most common means of identification of gamma-hydroxybutyrate (NaGHB) involves using Fourier transform infrared spectroscopy (FTIR) or gas chromatography-mass spectrometry (GC-MS) of a suitable derivative. However, these methods may be complicated by possible shifts in chemical equilibrium between gamma-hydroxybutyric acid (GHB), GHB salts and the precursor lactone, gamma-butyrolactone (GBL). This paper addresses the technique of proton and carbon nuclear magnetic resonance spectroscopy (1H and 13C NMR) for the direct and accurate identification of GHB and GBL. The application of 1H NMR for GHB quantitation is also discussed.     

Determination of paraquat in raw and formalin-fixed tissues by electron spin resonance (ESR) spectroscopy

ESR method was applied to determine paraquat levels in fresh and formalin-fixed tissues. Paraquat was converted to paraquat radical by adding sodium dithionite to tissue homogenates and detected by ESR. Paraquat levels of more than 0.2 micrograms/ml homogenate could be quantified with 0.1 ml of the homogenate. The use of manganese ions for standardization of paraquat signal enabled much more accurate ESR measurements because this ion was quite stable and its signal did not overlap that of paraquat. Even with tissues fixed in formalin, tissues paraquat levels were measureable after removing formalin from the tissue extract. This fact was verified by studying two cases; the tissues were kept in formalin for 1.5 years in case 1 and for 6.5 years in case 2. In both cases, the paraquat contents in tissues were 0.02-0.08 micrograms/g. In this way ESR is one of the most suitable methods in determining low levels of paraquat in tissues even after they were preserved in formalin for a long time.     

Spatially offset Raman spectroscopy (SORS) for the analysis and detection of packaged pharmaceuticals and concealed drugs

Spatially offset Raman spectroscopy (SORS) is a powerful new technique for the non-invasive detection and identification of concealed substances and drugs. Here, we demonstrate the SORS technique in several scenarios that are relevant to customs screening, postal screening, drug detection and forensics applications. The examples include analysis of a multi-layered postal package to identify a concealed substance; identification of an antibiotic capsule inside its plastic blister pack; analysis of an envelope containing a powder; and identification of a drug dissolved in a clear solvent, contained in a non-transparent plastic bottle. As well as providing practical examples of SORS, the results highlight several considerations regarding the use of SORS in the field, including the advantages of different analysis geometries and the ability to tailor instrument parameters and optics to suit different types of packages and samples. We also discuss the features and benefits of SORS in relation to existing Raman techniques, including confocal microscopy, wide area illumination and the conventional backscattered Raman spectroscopy. The results will contribute to the recognition of SORS as a promising method for the rapid, chemically specific analysis and detection of drugs and pharmaceuticals.     

Identification of parent benzodiazepines by gas chromotography/mass spectroscopy (GC/MS) from urinary extracts treated with B-glucuronidase

Urinary glucuronide metabolites of the benzodiazepines were converted back to the parent molecules after treatment with B-glucuronidase. The benzodiazepines were extracted by a one-step liquid/liquid extraction from urine or by a liquid/solid phase extraction. For the limit of detection (LOD), a standard solution of diazepam and oxazepam was serially diluted and analyzed to the point at which a reproducible analytical result was no longer obtained. Using a temperature program and a splitless mode of injection, excellent quantitation was achieved within an 8-min run time. Based upon specimens obtained from patients under a physician's care, we have determined that urinary concentrations of the benzodiazepines > 200 ng/ml are most likely due to abuse rather than to a prescribed ingestion under strict medical surveillance. Therefore, the calibration standard and cutoff concentration for a positive result was set at 200 ng/ml.     

The Discrimination of Colored Acrylic,Cotton, and Wool Textile Fibers Using Micro‐Raman Spectroscopy. Part 1: In situ Detection and Characterization of Dyes

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633‐nm laser did not provide Raman information. The 514‐nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830‐nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength.     

Proton nuclear magnetic resonance spectroscopy (NMR) methods for determining the purity of reference drug standards and illicit forensic drug seizures

A rapid, sensitive, accurate, precise, reproducible, and versatile method for determining the purity of reference drug standards and the routine analysis of illicit drugs and adulterants using proton (1H) Nuclear Magnetic Resonance (NMR) Spectroscopy is presented. The methodology uses a weighed sample dissolved in a deuterated solvent or solvent mixture containing a high purity internal standard. The NMR experiment employs 8 scans using a 45 second delay and 90 degrees pulse. In the determination of purity of reference standards, the number of quantitative determinations available is equal to the number of peak groups that are baseline resolved. The relative standard deviation (RSD) of these signals is usually < 1% for pure standards, and the results agree well with other purity determining methods. This method can also aid in the determination of correct molecular weight for standards containing an unknown number of waters of hydration or an unknown number of acids per drug in salts. Because the molar response for the hydrogen nucleus is 1 for all compounds, and since no separation media are used, only one linearity study is required to test a probe. In the presented study, the linearity of the NMR probe was determined using methamphetamine HCl dissolved in deuterium oxide (D2O) with maleic acid as the internal standard (5 mg) for a range of concentrations from 0.033 to 69.18 mg/ml with a resulting correlation coefficient of >0.9999 for all 6 methamphetamine peak groups. The spectra of complex illicit heroin, methamphetamine, MDMA, and cocaine samples are presented, as well as an extensive list of compounds, their solubilities and the solvent(s) and internal standard used.     

Isolation of deoxyribonucleic acid (DNA) from saliva and forensic science samples containing saliva.

Saliva and saliva-stained materials were examined as potential sources of deoxyribonucleic acid (DNA) for DNA analysis and identity testing. In this paper, the authors demonstrate that DNA was isolated and DNA banding patterns suitable for DNA typing were obtained from fresh saliva and various saliva-stained materials, such as envelopes, buccal swabs, gags, and cigarettes. Furthermore, DNA and DNA banding patterns were obtained from actual forensic evidentiary samples containing mixed saliva/semen stains. The DNA banding patterns obtained from saliva or saliva-stained material were indistinguishable from the patterns obtained from blood or hair from the same individual. Intact DNA was readily isolated and DNA banding patterns were obtained from saliva stored at -20 degrees C and dried saliva stains stored under varying conditions. We conclude that saliva and saliva-stained material can be good sources of DNA for analysis and for DNA typing in certain forensic settings.     

Determination of firing distance. Lead analysis on the target by atomic absorption spectroscopy (AAS)

This paper reports a method for the determination of the firing distance. Atomic absorption spectroscopy (AAS) was used to determine the lead (Pb) pattern around bullet holes produced by shots on test targets from the gun. Test shots were made with a Colt 38 Special at 5, 10, 20, 25, 30, 35, 40, 45, 50, 60, 80, and 100 cm target distance. The target was created with sheets of Whatman no. 1 paper on a polystyrene support. The target was subdivided into three carefully cut out rings (1, 2, and 3; with external diameters of 1.4 cm; 5 cm; 10.2 cm, respectively). Each sample was analyzed with graphite furnace AAS. Lead values analysis performed for each ring yielded a linear relation between the firing distance (cm) and the logarithm of lead amounts (microg/cm(2)) in definite target areas (areas 2 + 3): [ln dPb(2+3) = a(0) + a(1)l]; where dPb(2+3) = lead microg/cm(2) of area 2 + 3; a(0) and a(1) are experimentally calculated; l = distance in cm.     

Evaluation of an enzyme linked immunosorbent assay (ELISA) method for ABO and Lewis typing of body fluids in forensic samples.

An ELISA for the detection of the ABO group and secretor status of body fluids and stains other than blood is described, together with the validation procedures employed before its introduction into forensic casework. Criteria for the interpretation of results have been formulated for the method in use in this laboratory. The method was found to be reliable and to have a higher success rate than the haemagglutination techniques previously employed.     

Identification and quantitation of 3,4-methylenedioxy-N-methylamphetamine (MDMA,ecstasy) in human urine by 1H NMR spectroscopy. Application to five cases of intoxication

Identification of 3,4-methylenedioxy-N-methylamphetamine (MDMA, ecstasy) in five cases of intoxication using nuclear magnetic resonance (NMR) spectroscopy of human urine is reported. A new water suppression technique PURGE (Presaturation Utilizing Relaxation Gradients and Echoes) was used. A calibration curve was obtained using spiked samples. The method gave a linear response (correlation coefficient of 0.992) over the range 0.01–1 mg/mL. Subsequently, quantitation of the amount of MDMA present in the samples was performed. The benefit and reliability of NMR investigations of human urine for cases of intoxication with MDMA are discussed.