A solid-phase microextraction method for the detection of ignitable liquids in fire debris

A solid-phase microextraction (SPME) procedure involving direct contact between the SPME fibers and the solid matrix and subsequent gas chromatography/mass spectrometric analysis for the detection of accelerants in fire debris is described. The extraction performances of six fibers (100 mum polydimethylsiloxane, 65 mum polydimethylsiloxane-divinylbenzene, 85 mum polyacrylate, 85 mum carboxen-polydimethylsiloxane, 70 mum Carbowax-divinylbenzene, and 50/30 mum divinylbenzene-Carboxen-polydimethylsiloxane) were investigated by directly immersing the fibers into gasoline, kerosene, and diesel fuel. For simulated fire debris, in the direct contact extraction method, the SPME fiber was kept in contact with the fire debris matrix during extraction by penetrating plastic bags wrapping the sample. This method gave comparable results to the headspace SPME method in the extraction of gasoline and kerosene, and gave an improved recovery of low-volatile components in the extraction of diesel fuel from fire debris. The results demonstrate that this procedure is suitable as a simple and rapid screening method for detecting ignitable liquids in fire debris packed in plastic bags.     

Review of analytical techniques for arson residues

Arson is a serious crime that affects society through cost, property damage, and loss of life. It is important that the methods and technologies applied by fire investigators in detection of evidence and subsequent analyses have a high degree of reliability, sensitivity, and be subject to rigorous quality control and assurance. There have been considerable advances in the field of arson investigation since the 1950s. Classification of ignitable liquids has been updated to include many new categories due to developments in the petroleum industry. Techniques such as steam or vacuum distillation and gas chromatography (GC) with flame ionization detection that may have been considered acceptable--even a benchmark--40 years ago, are nowadays generally disfavored, to the extent that their implementation may almost be considered as ignorance in the field. The advent of readily available mass spectrometric techniques has revolutionized the field of fire debris analysis, increasing the degree of sensitivity and discrimination possible considerably. Multi-dimensional GC--particularly GC x GC--while not yet widely applied, is rapidly gaining recognition as an important technique. This comprehensive review focuses on techniques and practices used in fire investigation, from scene investigation to analysis.     

Availability of target odor compounds from seized ecstasy tablets for canine detection

The aim of this study was to compare seized samples of 3,4-methylenedioxy-N-methylamphetamine (MDMA) pills, used to train law enforcement detection canine teams, to determine what differences exist in the chemical makeup and headspace odor and their effect on detectability. MDMA solutions were analyzed by liquid chromatography-mass spectrometry. Analysis of these samples showed a wide variance of MDMA (8-25%). Headspace SPME-GC/MS analysis showed that several compounds such as 3,4-methylenedioxyphenylacetone and 1-(3,4-methylenedioxyphenyl)-2-propanol are common among these MDMA samples regardless of starting compound and synthesis procedure. However, differences, such as the level of the various methylenedioxy starting compounds, were shown to affect the overall outcome of canine detection, indicating the need for more than one MDMA training aid. Combinations of compounds such as the primary odor piperonal in conjunction with a secondary compound such as MDP-2-OH or isosafrole are recommended to maximize detection of different illicit MDMA samples.     

Detection and Classification of Ignitable Liquid Residues in the Presence of Matrix Interferences by Using Direct Analysis in Real Time Mass Spectrometry,

Conventional Gas Chromatography‐Mass Spectrometry (GC‐MS) methods for the analysis of ignitable liquids (ILs) are usually time‐consuming, and the data produced are difficult to interpret. A fast IL screening method using direct analysis in real time mass spectrometry (DART‐MS) is proposed in this study. GC‐MS, QuickStrip DART‐MS, and thermal desorption DART‐MS methods were used to analyze neat ILs and thermal desorption DART‐MS without extraction was used to analyze ILs on five substrates (e.g., carpet, wood, cloth, sand, and paper). Compared to GC‐MS, DART‐MS methods generated different spectral profiles for neat ILs with more peaks in the higher mass range and also provided better detection of less volatile compounds. ILs on substrates were successfully classified (98 ± 1%) using partial least squares discriminant analysis (PLS‐DA) models based on thermal desorption DART‐MS data. This study shows that DART‐MS has great potential for the high‐throughput screening of ILs on substrates.     

Evaluation of a Headspace Solid‐Phase Microextraction Method for the Analysis of Ignitable Liquids in Fire Debris

The chemical analysis of fire debris represents a crucial part in fire investigations to determine the cause of a fire. A headspace solid‐phase microextraction (HS‐SPME) procedure for the detection of ignitable liquids in fire debris using a fiber coated with a mixture of three different sorbent materials (Divinylbenzene/Carboxen/Polydimethylsiloxane, DVB/CAR/PDMS) is described. Gasoline and diesel fuel were spiked upon a preburnt matrix (wood charcoal), extracted and concentrated with HS‐SPME and then analyzed with gas chromatography/mass spectrometry (GC/MS). The experimental conditions—extraction temperature, incubation and exposure time—were optimized. To assess the applicability of the method, fire debris samples were prepared in the smoke density chamber (SDC) and a controlled‐atmosphere cone calorimeter. The developed methods were successfully applied to burnt particleboard and carpet samples. The results demonstrate that the procedure that has been developed here is suitable for detecting these ignitable liquids in highly burnt debris.     

Detection and Classification of Ignitable Liquid Residues Using a Fluorescence‐Based Vapor‐Sensitive Microsphere Array*

Abstract: This paper describes the application of microsphere vapor sensing arrays to the detection of ignitable liquid (IL) vapors as both pure vapors and as residues (ILRs) on simulated fire debris samples. The temporal fluorescence response profile of the microsphere array generated a reproducible pattern unique to each analyte that could be used to classify subsequent sensor responses. This system, together with a support vector machine pattern recognition algorithm, was used to address several different IL and ILR classification scenarios. High classification accuracy (98%) was maintained over more than 200 vapor responses and the array was able to identify ILs when presented to the pattern classification algorithm within a dataset containing 11 other volatile compounds. Both burned and unburned IL treated samples were classified correctly greater than 97% of the time. These results indicate that microsphere vapor sensing arrays may be useful for the rapid identification of ILs and ILRs.     

Evaluation of Internal Standards for the Analysis of Ignitable Liquids in Fire Debris

Abstract:  An evaluation of eight compounds for use as an internal standard in fire debris analysis was conducted. Tests were conducted on tetrachloroethylene, chlorobenzene, n-octylbenzene, 3-phenyltolune, and deuterated compounds toluene-d8, styrene-d8, naphthalene-d8, and diphenyl-d10 to measure the extraction efficiency of each compound in the presence of an interfering volatile compound (carbon disulfide). Other tests were conducted to evaluate whether or not the presence of an ignitable liquid or pyrolysis/combustion products from fire debris would interfere with the identification of these compounds when used as an internal standard. The results showed that while any of the eight compounds could be used as an internal standard in fire debris analysis, the more volatile compounds (toluene-d8, tetrachloroethylene, chlorobenzene, and styrene-d8) showed better extraction efficiencies at room temperature than when heated to 60°C. Each of the less volatile compounds (naphthalene-d8, diphenyl-d10, n-octylbenzene, and 3-phenyltolune) performed well during extraction at 60°C, while naphthalene-d8 showed better extraction efficiency in the presence of competing volatiles when extracted at room temperature.     

Comparison of the effectiveness of Tenax TA and Carbotrap 300 in concentration of flammable liquids compounds

The aim of research was to compare two adsorbents, Tenax TA and Carbotrap 300, to evaluate their usefulness as passive adsorbents of flammable liquids compounds. It was also to determine whether Carbotrap 300 could be used in a passive adsorption mode, contrary to manufacturer recommendations. To compare the adsorption properties and the thermal desorption efficiency for Tenax TA and Carbotrap, the components of test mixture were adsorbed and then chromatographically analyzed. The analysis was conducted by means of an automated thermal desorber coupled with a gas chromatograph and a mass spectrometer. This research established that although these adsorbents significantly differ from each other in adsorption properties, each of them can be successfully used for passive adsorption of ignitable liquids compounds. Tenax TA turned out to be more effective for the adsorption of nonpolar, high-boiling compounds, whereas Carbotrap is more effective for polar and volatile compounds. The examined adsorbents differ in their susceptibility to thermal desorption. For Carbotrap 300, after the analysis an additional treatment is required to remove the remnants of adsorbed compounds. With Tenax TA, this additional step is not necessary because the thermal desorption is sufficiently effective that this product is immediately ready for re-use.     

Latent evidence detection using a combination of near infrared and high dynamic range photography: an example using bloodstains

In this paper, we use bloodstains to illustrate an approach for identifying latent evidence on dark cloth using near infrared (NIR) photography combined with high dynamic range (HDR) photography techniques. NIR photography alone has been used to capture latent evidence that cannot be seen in normal ambient light. HDR techniques combine multiple bracketed photographs of the same image to increase the dynamic range of the photograph which can provide greater contrast. Using NIR photography alone, we were able to detect a bloodstain up to a 1/16 dilution, an improvement over previous studies. Combining NIR photography with the HDR process resulted in a noticeable increase in visibility up to 1/16 dilution when compared to NIR photographs alone. At 1/32 dilution, we were able to detect bloodstains that were not visible using NIR alone. NIR is a useful tool for imaging latent evidence, and combining NIR with HDR consistently provides better results over NIR alone.     

The Use of Entheseal Changes in the Femur and Os Coxa for Age Assessment

This study examined the relationship between age and entheseal modifications in the femur and os coxa for estimating age at death. Five areas on the os coxa and four on the femur were scored in 200 white individuals over 40 years of age. Statistical analyses assessed the relationship between age and entheseal modification using both raw scores and scores adjusted for body size, for each sex, and for sexes combined. Results indicate that significant relationships exist between age and entheseal modification at three sites on the femur and four on the os coxae, but the relationships are not strong enough to generate age predictions. Conversely, the most severe entheseal modifications show promise as an indicator of age in older adults. Although further research is needed using larger samples for robust statistical analyses, current data indicate these modifications can suggest an age >60, or in some cases 70, years.     

Evolution of the content of THC and other major cannabinoids in drug-type cannabis cuttings and seedlings during growth of plants

In Europe, authorities frequently ask forensic laboratories to analyze seized cannabis plants to prove that cultivation was illegal (drug type and not fiber type). This is generally done with mature and flowering plants. However, authorities are often confronted with very young specimens. The aim of our study was to evaluate when the chemotype of cannabis plantlets can be surely determined through analysis of eight major cannabinoids content during growth. Drug-type seedlings and cuttings were cultivated, sampled each week, and analyzed by high-performance liquid chromatography with diode array detection. The chemotype of clones was recognizable at any developmental stage because of high total Δ(9)-tetrahydrocannabinol (THC) concentrations even at the start of the cultivation. Conversely, right after germination seedlings contained a low total THC content, but it increased quickly with plant age up, allowing chemotype determination after 3 weeks. In conclusion, it is not necessary to wait for plants' flowering to identify drug-type cannabis generally cultivated in Europe.     

Development of a DNA-based macroarray for the detection and identification of Amanita species

A DNA-based macroarray was designed to quickly and accurately identify certain Amanita mushroom specimens at the species level. The macroarray included probes for Amanita phalloides and Amanita ocreata, toxic species responsible for most mushroom poisonings, and Amanita lanei and Amanita velosa, edible species sometimes confused with toxic species, based on sequences of the highly variable internal transcribed spacer (ITS) region of rDNA. A cryptic species related to A. ocreata and one related to A. lanei, identifiable by ITS sequences, were also included. Specific multiple oligonucleotide probes were spotted onto nylon membranes and the optimal hybridization temperatures were determined. The Amanita DNA array was highly specific, sensitive (0.5 ng DNA/μL and higher were detected), and reproducible. In two case studies, the method proved useful when only small amounts of mushroom tissue remained after a suspected poisoning. An identification could be completed in 12 h.     

Development and validation of a simple GC-MS method for the simultaneous determination of 11 anticholinesterase pesticides in blood--clinical and forensic toxicology applications

Anticholinesterase pesticides are widely used, and as a result they are involved in numerous acute and even fatal poisonings. The aim of this study was the development, optimization, and validation of a simple, rapid, specific, and sensitive gas chromatography-mass spectrometry method for the determination of 11 anticholinesterase pesticides (aldicarb, azinphos methyl, carbofuran, chlorpyrifos, dialifos, diazinon, malathion, methamidophos, methidathion, methomyl, and terbufos) in blood. Only 500 μL of blood was used, and the recoveries after liquid-liquid extraction (toluene/chloroform, 4:1, v/v) were more than 65.6%. The calibration curves were linear (R(2) ≥ 0.996). Limit of detections and limit of quantifications were found to be between 1.00-10.0 and 3.00-30.0 μg/L, respectively. Accuracy expressed as the %E(r) was found to be between -11.0 and 7.8%. Precision expressed as the percent relative standard deviation was found to be <9.4%. The developed method can be applied for the investigation of both forensic and clinical cases of accidental or suicidal poisoning with these pesticides.     

The determination of psilocin and psilocybin in hallucinogenic mushrooms by HPLC utilizing a dual reagent acidic potassium permanganate and tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence detection system

This paper describes a procedure for the determination of psilocin and psilocybin in mushroom extracts using high-performance liquid chromatography with postcolumn chemiluminescence detection. A number of extraction methods for psilocin and psilocybin in hallucinogenic mushrooms were investigated, with a simple methanolic extraction being found to be most effective. Psilocin and psilocybin were extracted from a variety of hallucinogenic mushrooms using methanol. The analytes were separated on a C12 column using a (95:5% v/v) methanol:10 mM ammonium formate, pH 3.5 mobile phase with a run time of 5 min. Detection was realized through a dual reagent chemiluminescence detection system of acidic potassium permanganate and tris(2,2'-bipyridyl)ruthenium(II). The chemiluminescence detection system gave improved detectability when compared with UV absorption at 269 nm, with detection limits of 1.2 x 10(-8) and 3.5 x 10(-9) mol/L being obtained for psilocin and psilocybin, respectively. The procedure was applied to the determination of psilocin and psilocybin in three Australian species of hallucinogenic mushroom.     

Validation of an LC–MS Method for the Detection and Quantification of BZP and TFMPP and their Hydroxylated Metabolites in Human Plasma and its Application to the Pharmacokinetic Study of TFMPP in Humans*

Abstract: An LC–MS method was developed for benzylpiperazine (BZP) and trifluoromethylphenylpiperazine (TFMPP), constituents of “party pills” or “legal herbal highs,” and their metabolites in human blood plasma. Compounds were resolved using a mixture of ammonium formate (pH 4.5, 0.01 M) and acetonitrile (flow rate of 1.0 mL/min) with a C18 column. Calibration curves were linear from 1 to 50 ng/mL (R² > 0.99); the lower limit of quantification (LLOQ) was 5 ng/mL; the accuracy was >90%; the intra‐ and interday relative standard deviations (R.S.D) were <5% and <10%, respectively. Human plasma concentrations of TFMPP were measured in blood samples taken from healthy adults (n = 6) over 24 h following a 60‐mg oral dose of TFMPP: these peaked at 24.10 ng/mL (±1.8 ng/mL) (C_max) after 90 min (T_max). Plasma concentrations of 1‐(3‐trifluoromethyl‐4‐hydroxyphenyl) piperazine peaked at 20.2 ng/mL (±4.6 ng/mL) after 90 min. TFMPP had two disposition phases (t_½ = 2.04 h (±0.19 h) and 5.95 h (±1.63 h). Apparent clearance (Cl/F) was 384 L/h (±45 L/h).     

Establishing an integrated pipeline for automatic and efficient detection of trace DNA encountered in forensic applications

The analysis of trace DNA is a crucial component in forensic applications. Biological materials containing low-level DNA collected at crime scenes, such as fingerprints, can be valuable as evidence. Automatic detection of biological samples has been largely embraced in forensic applications to meet the increasing throughput requirements. However, the amount of DNA automatically retrieved from trace evidence often tends to be small and unstable, ultimately resulting in poor detection of DNA profiles. Thus, in this work, we introduced a robust DNA extraction and purification platform named Bionewtech® BN3200 (Bionewtech®, Shanghai, China) with the goal of constructing a rapid automatic detection system for trace DNA. The establishment of automatic detection system for trace DNA mainly encompassed two parts: assessing the sensitivity of automatic extraction platform and screening the optimal short tandem repeat (STR) typing kit. The sensitivity of Bionewtech® BN3200 platform based on Ultra-sensitive DNA Extraction kit was initially estimated, demonstrating that this extraction platform might contain large potential in the trace DNA extraction. For the amplification part, three sets of commercial multiplex STR typing kits were selected as candidates, and the amplified products were further genotyped on the Applied Biosystems 3500xl Genetic Analyzer. After comparation, SiFa™ 23 Plex Kit was determined as the most suitable amplification system for trace DNA. Eventually, the newly exploited trace DNA detection system was successfully implemented in the detection of fingerprints derived from glass surfaces with the five-seconds contact time. As a result, the DNA recovered from the fingerprints fluctuated approximately from 57.60 pg to 18.05 ng, in addition, over 70% of the total STR loci were detected in 75% of the fingerprint samples.     

Use of styryl 11 and STaR 11 for the luminescence enhancement of cyanoacrylate-developed fingermarks in the visible and near-infrared regions

In current casework, most post-cyanoacrylate stains rely on luminescence emission in the visible region (400-700 nm). While traditional stains such as rhodamine 6G work well under most circumstances, some surfaces may generate background luminescence under the same conditions. Detection in the near-infrared region (NIR > 700 nm) has shown to be effective in minimizing the interferences from such surfaces. The laser dye styryl 11 generated strongly luminescent fingermarks when applied after cyanoacrylate fuming on all surfaces tested. When compared to rhodamine 6G, the dye was superior only when viewed in the NIR. Styryl 11 was subsequently combined with rhodamine 6G, and the mixed stain formulation (named StaR 11 by the authors) induced stronger luminescence compared with styryl 11 alone with an ability to visualize in both the visible and NIR regions. Reliable and consistent results were obtained when using either styryl 11 alone or the STaR 11 mixture. The enhancement achieved did not otherwise vary depending on the source of the fingermark secretions. With visualization possible in both the visible and NIR regions, the styryl 11/rhodamine 6G mixture showed significant potential as a post-cyanoacrylate stain.     

Visualization of latent fingermark corrosion of brass, climatic influence in a comparison between the U.K. and Iraq

Through a comparison of fingermark sweat corrosion of α phase brass in both the U.K. and Iraq, we show how samples from Iraq have improved fingermark corrosion over U.K. samples that require no additional enhancement prior to visualization. Over 50% of Iraqi samples produced fingermark corrosion with full ridge detail compared with 0% from the U.K. X-ray photoelectron spectroscopy analysis of the fingermark corrosion products showed that Iraqi samples exhibit more dezincification with the Zn:Cu ratio averaging 1:1.82 compared with 1:3.07 for U.K. samples. Auger spectroscopy showed the presence of both zinc oxide and copper (I) oxide. No copper (II) was observed on the surface of the corroded brass. Opportunities to exploit the optical properties of these thin film oxides to enhance the visualization of fingermark corrosion are considered, and the potential to use fingermark corrosion of metal as a means of visualizing fingerprints in war zones is discussed.     

Preclinical Assessment of Safety and Efficacy of Fluorescent Dye for Detecting Dermal Injuries (the injuries were both abrasions and incision) in a Murine Model

Objective documentation of tears and abrasions to the external genitalia after sexual assault is an important part of the forensic examination. A 1% aqueous solution of toluidine blue (TB) dye is often used to highlight injury, but the dye can be difficult to see on dark skin. We evaluated a fluorescent dye for detecting injuries on all skin colors in a relevant preclinical murine model. We compared the ability of trained, blinded observers to detect unstained wounds and wounds stained with 1% fluorescein sodium (FL) and with TB. We also evaluated the cutaneous wound healing response after application of both dyes. The no‐dye group had significantly fewer (p < 0.05) true‐positive identifications compared to all the dye groups. No differences in effectiveness were detected between dye treatments. All groups exhibited statistically similar healing rates. These findings support the evaluation of fluorescein sodium in a future clinical study with human subjects.