Sex determination from the head of the femur of South African whites and blacks

The current practice whereby criminals dismember the remains of their victims in an attempt to make their identification difficult requires that simple methods of sex determination from fragmented skeletal remains are available to forensic anthropologists and skeletal biologists. The head of the femur is an example of such bone fragments. Identification and demarking points have been derived from the diameters of the head of the femur and used to determine the sex of individuals. It has been shown, however, that the numerical values of these parameters that permit sex identification vary between races. The objectives of the present study were therefore to establish the standard numerical values of the identification and demarking points for sex determination in South African whites and blacks and to see if these standards are different in the two races. A total of 520 femurs of white (160 males and 100 females) and black (160 males and 100 females) South Africans were obtained from the Raymond Dart Skeletal Collection in the Department of Anatomical Sciences of the University of the Witwatersrand, Johannesburg, South Africa. The vertical and transverse diameters of the heads of the femurs were measured by means of a stainless steel vernier caliper. Identification and demarking points were derived from the values of these diameters. The head diameter identification point and demarking point were found to be sexually dimorphic in both white and black South Africans. The mean head diameter of the male femur was significantly greater than the mean head diameter of the female femur in both population groups (significant at P<0.001). These values were correspondingly greater in the white than the black population. The numerical values of the male identification and demarking points were higher than the corresponding female values in the two population. In both sexes, these values were greater in the whites than the blacks South Africans. It is concluded that the diameters of the head of the femur and the identification and demarking points that are derived from them are sexually dimorphic in South African white and black populations. However, the numerical values of these sex-determining bone parameters defer between the two population groups. Therefore, it is necessary to determine race-specific standards of these parameters.     

Sex estimation in a modern American osteological sample using a discriminant function analysis from the calcaneus

Reliable methods for sex estimation during the development of a biological profile are important to the forensic community in instances when the common skeletal elements used to assess sex are absent or damaged. Sex estimation from the calcaneus has potentially significant importance for the forensic community. Specifically, measurements of the calcaneus provide an additional reliable method for sex estimation via discriminant function analysis based on a North American forensic population. Research on a modern American sample was chosen in order to develop up-to-date population specific discriminant functions for sex estimation. The current study addresses this matter, building upon previous research and introduces a new measurement, posterior circumference that promises to advance the accuracy of use of this single, highly resistant bone in future instances of sex determination from partial skeletal remains. Data were collected from The William Bass Skeletal Collection, housed at The University of Tennessee. Sample size includes 320 adult individuals born between the years 1900 and 1985. The sample was comprised of 136 females and 184 males. Skeletons used for measurements were confined to those with fused diaphyses showing no signs of pathology or damage that may have altered measurements, and that also had accompanying records that included information on ancestry, age, and sex. Measurements collected and analyzed include maximum length, load-arm length, load-arm width, and posterior circumference. The sample was used to compute a discriminant function, based on all four variables, and was performed in SAS 9.1.3. The discriminant function obtained an overall cross-validated classification rate of 86.69%. Females were classified correctly in 88.64% of the cases and males were correctly classified in 84.75% of the cases. Due to the increasing heterogeneity of current populations further discussion on this topic will include the importance that the re-evaluation of past studies has on modern forensic populations. Due to secular and micro evolutionary changes among populations, the near future must include additional methods being updated, and new methods being examined, both which should cover a wide population spectrum.     

Sex determination with the head of the radius

Analysis of a sample of 1108 radii corresponding to 567 black and white North Americans in the Terry Collection at the Smithsonian Institution demonstrates that the diameter of the radial head is an accurate sex discriminator for human remains. A simple "radial-head method" of sex determination consists of measuring the maximum and minimum diameters of the head and comparing such measurements with the test cutoff points. The subject is female when the maximum radial head diameter (either left or right) is less than or equal to 21 mm, and male when the maximum diameter (either left or right) is greater than or equal to 24 mm. The same decisions apply to the minimum diameters of 20 mm or less and 23 mm or more, respectively. When the maximum diameter is 23 mm or the minimum is 22 mm, the subject is more likely male; when the maximum diameter is 22 mm or the minimum is 21 mm, the subject is more likely female. The sample frequency of any one of these latter diameters is never more than 16%. Cross-validation of the method with a sample of 50 pairs of radii of the Terry Collection, different from the original specimens, resulted in 92% sexing accuracy when using the left radius singly, 94% accuracy when using the right radius singly, and 96% accuracy when using both radii jointly.     

An investigation into the accuracy and reliability of skull-photo superimposition in a South African sample

One of the aims of forensic science is to determine the identities of victims of crime. In some cases the investigators may have ideas as to the identities of the victims and in these situations, ante mortem photographs of the victims could be used in order to try and establish identity through skull-photo superimposition. The aim of this study was to evaluate the accuracy of a newly developed digital photographic superimposition technique on a South African sample of cadaver photographs and skulls. Forty facial photographs were selected and for each photo, 10 skulls (including the skull corresponding to the photo) were used for superimposition. The investigator did not know which of the 10 skulls corresponded to the photograph in question. The skulls were scanned 3-dimensionally, using a Cyberware? Model 3030 Colour-3D Scanhead scanner. The photos were also scanned. Superimposition was done in 3D Studio Max and involved a morphological superimposition, whereby a skull is superimposed over the photo and assessed for a morphological match. Superimposition using selected anatomical landmarks was also performed to assess the match. A total of 400 skull-photo superimpositions were carried out using the morphological assessment and another 400 using the anatomical landmarks. In 85% of cases the correct skull was included in the possible matches for a particular photo using morphological assessment. However, in all of these cases, between zero and three other skulls out of 10 possibilities could also match a specific photo. In the landmark based assessment, the correct skull was included in 80% of cases. Once again, however, between one and seven other skulls out of 10 possibilities also matched the photo. This indicates that skull-photo superimposition has limited use in the identification of human skeletal remains, but may be useful as an initial screening tool. Corroborative techniques should also be used in the identification process.     

Assessing zygomatic shape and size for estimating sex and ancestry in a South African sample

Unidentified, decomposed and skeletonised human remains are frequently found in South Africa, therefore, standardised, reliable and relevant sex and ancestry estimation methods are required for forensic identification. This study assessed sex and ancestral variation in zygomatic size and shape in a South African population using geometric morphometric analyses. The zygoma of 158 South African individuals were sampled. Eight zygomatic landmarks were captured in 3-dimensions using a Microscribe G2 digitiser and assessed using procrustean geometric morphometrics. Shape and size differences were analysed using multivariate linear regression, discriminant function and canonical variate analyses. Males had significantly larger zygomas than females. Significant shape variation was found between ancestral groups. Bantu-speaking and Mixed ancestry individuals had narrower, shorter and more anteriorly projecting orbital margins, whilst Europeans had vertically elongated and receded orbital margins. European ancestral groups were most discernible from Bantu-speakers and Mixed ancestral groups. Ancestry estimation accuracies improved when ancestry was aggregated with sex. Pairwise ancestry-linked comparisons in females were as follows; Bantu-speakers (76%) from Europeans (72%), Bantu-speakers (71%) from Mixed ancestry (59%) and European (72%) from Mixed ancestry (63%). Similarly, ancestry-linked comparisons in males were as follows; Bantu-speakers (77%) from Europeans (81%), Bantu-speakers (53%) from Mixed ancestry (59%) and European (72%) from Mixed ancestry (82%). Size differences are putatively linked to variations in hormone-regulated growth and muscular robusticity between males and females. Shape variations between ancestral groups are likely attributable to the heterogenous genetic and ancestral origins of the South African population. It is challenging to distinguish between South Africa Bantu speakers and Mixed ancestry people due to Mixed ancestry individuals having variable genetic contributions from Khoesan, Bantu-speakers, Europeans and Asians. Bantu-speaking and Mixed ancestry people had zygomatic morphologies consistent with historical thermoregulatory adaptations to sub-Saharan climates, reported in African-descendants. Zygomatic morphology in European descendants suggests ancestral origins from colder climatic regions. This study demonstrated the utility of the zygoma in distinguishing between ancestral groups in South Africa, but further research is required to develop population-specific standards to distinguish between South African populations with shared African ancestry. The zygoma shows a promising ability to estimate sex and ancestry in South Africans, suggesting population specific standards for this bone may be of forensic interest.     

An evaluation of non-metric cranial traits used to estimate ancestry in a South African sample

Establishing ancestry from a skeleton for forensic purposes has been shown to be difficult. The purpose of this paper is to address the application of thirteen non-metric traits to estimate ancestry in three South African groups, namely White, Black and "Coloured". In doing so, the frequency distribution of thirteen non-metric traits among South Africans are presented; the relationship of these non-metric traits with ancestry, sex, age at death are evaluated; and Kappa statistics are utilized to assess the inter and intra-rater reliability. Crania of 520 known individuals were obtained from four skeletal samples in South Africa: the Pretoria Bone Collection, the Raymond A. Dart Collection, the Kirsten Collection and the Student Bone Collection from the University of the Free State. Average age at death was 51, with an age range between 18 and 90. Thirteen commonly used non-metric traits from the face and jaw were scored; definition and illustrations were taken from Hefner, Bass and Hauser and De Stephano. Frequency distributions, ordinal regression and Cohen's Kappa statistics were performed as a means to assess population variation and repeatability. Frequency distributions were highly variable among South Africans. Twelve of the 13 variables had a statistically significant relationship with ancestry. Sex significantly affected only one variable, inter-orbital breadth, and age at death affected two (anterior nasal spine and alveolar prognathism). The interaction of ancestry and sex independently affected three variables (nasal bone contour, nasal breadth, and interorbital breadth). Seven traits had moderate to excellent repeatability, while poor scoring consistency was noted for six variables. Difficulties in repeating several of the trait scores may require either a need for refinement of the definitions, or these character states may not adequately describe the observable morphology in the population. The application of the traditional experience-based approach for estimating ancestry in forensic case work is problematic.     

Sex determination from the talus and calcaneus measurements

Several studies have demonstrated that discriminant function equations used to determine the sex of a skeleton are population-specific. The purpose of the present research was to develop discriminant function equations for sex determination on the basis of 18 variables on the right and left talus and calcaneus in a modern northern Italian sample. The sample consisted of 118 skeletons (62 males and 56 females) from the Frassetto Collection (University of Bologna). The ages of the individuals ranged from 19 to 70 years. The results indicated that metric traits of the talus (in particular) and calcaneus are good indicators of sexual dimorphism. The percentage of correct classification was high (87.9-95.7%). In view of the differences among current Italian populations, we tested the validity of the discriminant function equations in an independent sample of individuals of different origin (northern and southern Italy). The accuracy of classification was high only for the northern Italians. Most southern Italian males were misclassified as females, confirming the population-specificity of discriminant function equations.     

Metric determination of sex from the humerus in a Guatemalan forensic sample

The absence of population-specific standards for sex, age and stature estimation for rural Guatemala is problematic for the forensic analysis of skeletal remains recovered from clandestine graves attributed to the recent armed conflict in that country. In order to increase the reliability of the forensic analyses being undertaken in Guatemala, standards for metric determination of sex were developed. Data was collected on several bones; the results for the humerus are presented here. A sample of 118 complete humeri (68 male and 50 female) was studied; maximum length, maximum diameter of the head, circumference at midshaft, maximum diameter at midshaft, minimum diameter at midshaft and epicondylar breadth were measured and subjected to discriminant function analysis. The classification accuracies for the univariate functions range from 76.8% for the maximum diameter at midshaft to 95.5% for the maximum diameter of the head. The classification accuracy for the stepwise procedure was 98.2%.     

Sex determination from hand and foot dimensions in a North Indian population

Hands and feet are often recovered from the site of natural as well as man-made disasters because of bomb blasts, train accidents, plane crashes, or mass homicides. This study is intended to establish standards for determination of sex from the dimensions of hands and feet in a North Indian population. The data for this study comprise 123 men and 123 women aged between 17 and 20 years from the "Rajput" population of Himachal Pradesh in North India. Four anthropometric measurements viz. hand length, hand breadth, foot length, and foot breadth have been taken on both sides of each subject following international anthropometric standards. The hand index (hand breadth/hand length × 100) and the foot index (foot breadth/foot length × 100) were calculated. Sectioning points and regression models are derived for the hand and foot dimensions and the derived indices. The hand and foot dimensions show a higher accuracy in sex determination by sectioning point analysis when compared to hand and foot index. Of the hand and the foot dimensions, hand breadth and foot breadth showed better accuracy in sex determination. Hand index and foot index remain poor sex discriminators in the study.     

Metric sex determination from the pelvis in modern Greeks

The ability to determine sex from unknown skeletal remains is vital, and methods to do this on the various bones of the human skeleton have been researched extensively. Many researchers have emphasized the need for population specific data for methods which are based on measurements, as there are vast differences in body size in various populations. The pelvis is known to be the most sexually dimorphic part of the human body, and no discriminant function formulae for this bone are available for Greek or other Mediterranean groups. The purpose of this study was therefore to develop discriminant functions which can be used for sex determination on measurements of the pelvis of modern Greeks. A sample of 97 male and 95 female pelves in a skeletal collection housed in Heraklion, Crete, was used. Measurements were taken from the articulated pelvis, single os coxae and the sacrum. Discriminant function formulae for all measurements and various combinations were used in order to assess the degree of sexual dimorphism in various parts of the pelvis, and to make the formulae usable on fragmented remains. For the single os coxae, average accuracies of 79.7-95.4% (79.1-93.5% on cross-validation) were found. However, it was found that measurements of the sciatic notch were unreliable and yielded poor results, and it is advisable that this characteristic must only be used as a last resort. Dimensions of the sacrum were not very dimorphic (average accuracy 60.9%), while measurements from the articulated pelvis yielded poorer results than that from single innominate bones. The diameter of the acetabulum was the single most dimorphic characteristic, providing on average 83.9% accuracy when used in isolation.     

An assessment of the accuracy of discriminant function equations for sex determination of the femur and tibia from a South African population

The purpose of this study is to test the accuracy of seven discriminant function equations that have been derived by Steyn and Is?an for sex determination using measurements of the femur and tibia of South Africans of European descent (SAED). While the validity of some of the discriminant functions has been assessed by the authors who derived them, no previous independent study has been carried out to assess the accuracy of these equations. These equations have not been tested on skeletons located outside of the Gauteng province. A suite of measurements were taken on 272 femora and 256 tibiae obtained from four South African skeletal collections. The validity of each of the previously published equations for the femur was confirmed. However, two functions of the tibia showed low accuracy rates, most likely due to difficulties in recording the distal epiphyseal breadth measurement, and thus were found to be poor assessors of sex.     

Sex determination from the distal part of the femur in a French contemporary population

Until now, determining the sex of a recently deceased individual using the measurement of the bicondylar breadth of the femur (also known as condylar width, epicondylar breadth and distal epiphyseal breadth) raised some concerns as to accuracy because no sample of contemporary French subjects was available. In this study, a sample of 88 female and male femurs taken from recently deceased elderly French people was studied. The bones were collected from subjects who had donated their bodies to the Medical School of Nice. The mean value of the male bicondylar breadth was found to be greater than that of females (84.3mm versus 74.8mm), confirming the sexual dimorphism of this parameter. Furthermore, the results showed a 95.4% accuracy rate for sexing individuals. To date, in the French population, as in some other samples, epicondylar breadth is the single most accurate measurement of sex determination, ahead even of head diameter. A discriminant function is presented to allow sex determination from remains of the distal femur. With regard to the data available in the literature, sexual dimorphism is probably the result of both genetic and environmental factors. The comparison of our results with those of other populations shows that there are inter-population variations of the bicondylar breadth, and also intra-population variations that account for the differences in the accuracy rate of this variable for the purposes of sex determination. These findings underscore the need to re-evaluate bone measurements within various contemporary populations.     

Sex assessment from carpals bones: discriminant function analysis in a contemporary Mexican sample

Sex assessment is one of the first essential steps in human identification, in both medico-legal cases and bio-archaeological contexts. Fragmentary human remains compromised by different types of burial or physical insults may frustrate the use of the traditional sex estimation methods, such as the analysis of the skull and pelvis. Currently, the application of discriminant functions to sex unidentified skeletal remains is steadily increasing. However, several studies have demonstrated that, due to variation in size and patterns of sexual dimorphism, discriminant functions are population-specific. In this study, in order to improve sex assessment from skeletal remains and to establish population-specific discriminant functions, the diagnostic values of the carpal bones were considered. A sample of 136 individuals (78 males, 58 females) of known sex and age was analyzed. They belong to a contemporary identified collection from the Laboratory of Physical Anthropology, Faculty of Medicine, UNAM (Universidad Nacional Autónoma de México, Mexico City). The age of the individuals ranged between 25 and 85 years. Between four and nine measurements of each carpal bone were taken. Independent t-tests confirm that all carpals are sexually dimorphic. Univariate measurements produce accuracy levels that range from 61.8% to 90.8%. Classification accuracies ranged between 81.3% and 92.3% in the multivariate stepwise discriminant analysis. In addition, intra- and inter-observer error tests were performed. These indicated that replication of measurements was satisfactory for the same observer over time and between observers. These results suggest that carpal bones can be used for assessing sex in both forensic and bio-archaeological identification procedures and that bone dimensions are population specific.     

Sex determination from hand and foot bone lengths

Numerous studies have addressed sex estimation from the hands and feet with varying results. These studies have utilized multiple measurements to determine sex from the hands and feet, including measures of robusticity (e.g., base width and midshaft diameter). However, robusticity measurements are affected by activity, which can disguise underlying patterns of sexual dimorphism. The purpose of this study is to investigate the utility of length measurements of the hands and feet to estimate sex. The sample consists of white females (n=123) and males (n=136) from the Terry Collection. Discriminant function analysis was used to classify individuals by sex. The left hand outperformed both the right hand and foot producing correct classification rates exceeding 80%. Surprisingly, the phalanges were better sex discriminators than either the metacarpals or metatarsals. This study suggests that length measures are more appropriate than robusticity measures for sex estimation.     

Crime and Sex in South Australia

Policing Images: Policing, Communication, and Legitimacy. Rob C. Mawby. Portland, OR: Willan Publishing, 2002. ISBN 1–903240 71–9. Hardback US $55.00. 214 pages.

Armed Robbery. Roger Mathews. Portland, OR: Willan Publishing, 2002. ISBN 1–903240–61–1. 162 pages.     

Sex assessment from the carpals bones: discriminant function analysis in a 20th century Spanish sample

Sex assessment is one of the first essential steps in human identification, in both medico-legal cases and bio-archaeological contexts. Fragmentary human remains compromised by different types of inhumation or physical insults may frustrate the use of the traditional sex estimation methods, such as the analysis of the skull and pelvis. Currently, the application of discriminant functions to sex unidentified skeletal remains is steadily increasing. However, several studies have demonstrated that, due to variation in size and patterns of sexual dimorphism, discriminant function equations are population-specific [1,2,5,12,61]. In this study, in order to improve sex assessment from skeletal remains and to establish population-specific discriminant functions, the diagnostic values of the carpal bones were considered. A sample of 100 individuals (50 males and 50 females) of known sex and age was analyzed. They belong to a 20th century identified collection from the Municipal Cemetery of "San José", Granada (Spain) and housed in the Laboratory of Anthropology, Faculty of Medicine, University of Granada (Spain). The age of the individuals ranged between 22 and 85 years. Between four and nine measurements of each carpal bone were performed [41,59]. Discriminant function statistics showed a sex assessment accuracy as high as 97.8%. The results suggest that carpal bones can be used for assessing sex in both forensic and bio-archaeological identification procedures.     

Corruption and the South African Police

The literature on corruption in countries in the course of transition is likely to escalate in the light of changes in Eastern Europe (Holmes 1997, Varese 1997). The ‘end of empire’ is associated with the breakdown in the rule of law. Through a variety of subterfuges, both individuals and corporate bodies seek to ensure their own survival, within the matrix of the collapse of legal order. In South Africa, similar transformations, as epitomised by the hearings of the Truth and Reconciliation Commission, have provided a window of opportunity to unveil the mechanisms which maintained that apartheid regime for nearly half a century. Understanding that complex practice of state deviance entails recognising the different levels of state power and malpractice in that country. This article flows directly from the Foucauldian notion of the decentralisation of power in modern society. Power in the authoritarian state is not just a function of a clearly-defined state apparatus. Rather that locus co-exists with various sub-foci at lower levels of state and civil society, in which local interactions and power relations, contribute to the totality of control. Apartheid survived for many years not because it signified an authoritarian centralised state but because it could rely on individuals and agencies at lower strata of power to contribute their own efforts to sustaining that abnormal structure. Deviance by state personnel at different levels – to which the Nelson's eye was turned – was critical to the maintenance of white hegemony. The article focuses directly on one such nexus – the extent to which different interests – financial, organisational, and a commitment to racial hegemony – cooperated in a seamless web to ensure that the white rule was paramount in micro-level decision-making structures. Micro-level influences on police training and of police promotions – deviant by any conventional yardstick-served both state and individual interests. This revised version was published online in July 2006 with corrections to the Cover Date.