Antemortem dental records: attitudes and practices of forensic dentists

This study was designed to provide insight concerning the attitudes and practices of forensic dentists regarding antemortem dental records reviewed for purposes of dental identification. Forensic dentists were invited to participate in a 10 item survey. The majority of the respondents reported a considerable amount of experience in dental identifications of the deceased. Sixty-six percent reported having suspected dental negligence or fraud in their antemortem record reviews. Only 17% believe that a forensic dentist should report suspected dental negligence, while 31% agree that dental fraud should be reported. Their response to additional issues addressed in the study suggests diversity in the practices and attitudes of forensic dentists in the use of antemortem dental records. In conclusion, opening a dialogue among practicing forensic dentists may lead to a standardized set of recommendations by the appropriate societies in the forensic dental community.     

Color Stability of Dental Restorative Materials Submitted to Heat Sources,for Forensic Purposes

During postmortem examination of the dental arches of carbonized victims, dental restorative materials may be found. The aim of this study was to evaluate the effect of heat source action on the color stability of composite resin (CR) and glass ionomer cement (GIC) restorations, to discriminate between them and compare with antemortem dental data. Sixty bovine teeth (30 CR and 30 GIC) were prepared (6 × 6 × 2 mm) and separated into groups (n = 10). The color readouts were taken by spectrophotometer, before and after heat action (100°C, 200°C, 300°C), in an oven for 15 min. There were color alterations for all coordinates (ΔE, ΔL*, Δa* eΔb*) for both materials. GIC presented greater change. The authors concluded that it is possible to distinguish between the materials by the color changes analyzed by instrumental method, helping victim identification.     

Testing a Novel 3D Printed Radiographic Imaging Device for Use in Forensic Odontology

There are specific challenges related to forensic dental radiology and difficulties in aligning X‐ray equipment to teeth of interest. Researchers used 3D printing to create a new device, the combined holding and aiming device (CHAD), to address the positioning limitations of current dental X‐ray devices. Participants (N = 24) used the CHAD, soft dental wax, and a modified external aiming device (MEAD) to determine device preference, radiographer's efficiency, and technique errors. Each participant exposed six X‐rays per device for a total of 432 X‐rays scored. A significant difference was found at the 0.05 level between the three devices (p = 0.0015), with the MEAD having the least amount of total errors and soft dental wax taking the least amount of time. Total errors were highest when participants used soft dental wax—both the MEAD and the CHAD performed best overall. Further research in forensic dental radiology and use of holding devices is needed.     

Forensic Facial Reconstruction: Relationship Between the Alar Cartilage and Piriform Aperture

During forensic facial reconstruction, facial features may be predicted based on the parameters of the skull. This study evaluated the relationships between alar cartilage and piriform aperture and nose morphology and facial typology. Ninety‐six cone beam computed tomography images of Brazilian subjects (49 males and 47 females) were used in this study. OsiriX software was used to perform the following measurements: nasal width, distance between alar base insertion points, lower width of the piriform aperture, and upper width of the piriform aperture. Nasal width was associated with the lower width of the piriform aperture, sex, skeletal vertical pattern of the face, and age. The current study contributes to the improvement of forensic facial guides by identifying the relationships between the alar cartilages and characteristics of the biological profile of members of a population that has been little studied thus far.     

Stability of Palatal Rugae as a Forensic Marker in Orthodontically Treated Cases

The palatal rugae have been used as a reference landmark and identification marker by orthodontists and forensic analysts. However, the reliability of palatal rugae as a forensic marker remains questionable once an individual is subjected to orthodontic treatment. This study aimed at evaluating the changes in the rugae pattern after nonextraction, extraction, and maxillary expansion orthodontic treatment. The lengths and shapes of palatal rugae were evaluated on the pretreatment and post‐treatment dental casts of 168 subjects using the Thomas and Kotze classification. Extraction treatment significantly reduced the second and third rugae lengths (p < 0.05), whereas the third rugae length was significantly increased after palatal expansion (p < 0.05). The shape of rugae remained consistent in all the study groups which may be used as a reliable forensic marker in subjects undergoing orthodontic treatment. However, the use of the lengths of palatal rugae in forensic odontology must be made with caution.     

Implant Bone Integration Importance in Forensic Identification

Odontological identification consists of the comparison of antemortem dental information regarding a missing person with postmortem data from an unidentified corpse or human remains. Usually, the comparison concerns morphologic features that the operator chooses among all the visible characteristics because of inter‐individual uniqueness; for this reason, implants can be of enormous assistance. A case concerning the recovery of a burnt oral implant, connected to a bone fragment, among 2780 charred bone fragments, suspected to have belonged to a victim of homicide, is presented to demonstrate that dental implants and their site of bone integration represent a very precious element for personal forensic identification. Because of their morphological invariability in time and because of their morphologic uniqueness, they were used as evidence to associate unidentified human charred remains to a missing person where DNA analysis failed to do so. The case illustrates the fundamental contribution, not yet described in literature, given by the clinical aspects of tooth replacement with dental implants to a forensic discipline. Clinical practitioners should therefore be aware of the great importance of their work and of dental records in a forensic identification scenario.     

Computer‐aided Dental Identification: An Objective Method for Assessment of Radiographic Image Similarity*

Abstract: A pilot study evaluated a computer‐based method for comparing digital dental images, utilizing a registration algorithm to correct for variations in projection geometry between images prior to a subtraction analysis. A numerical assessment of similarity was generated for pairs of images. Using well‐controlled laboratory settings, the method was evaluated as to its ability to identify the correct specimen with positive results. A subsequent clinical study examined longitudinal radiographic examinations of selected anatomical areas on 47 patients, analyzing the computer‐based method in making the correct identification based upon a threshold level of similarity. The results showed that at a threshold of 0.855, there were two false negative and two false positive identifications out of 957 analyses. Based on these initial findings, 25 dental records having two sets of full mouth series of radiographs were selected. The radiographs were digitized and grouped into six anatomical regions. The more recent set of films served as postmortem images. Each postmortem image was analyzed against all other images within the region. Images were registered to correct for differences in projection geometry prior to analysis. An area of interest was selected to assess image similarity. Analysis of variance was used to determine that there was a significant difference between images from the same individual and those from different individuals. Results showed that the threshold level of concordance will vary with the anatomical region of the mouth examined. This method may provide the most objective and reliable method for postmortem dental identification using intra‐oral images.     

The Status of Forensic Anthropology in Europe and South Africa: Results of the 2016 FASE Questionnaire on Forensic Anthropology

One of the goals of the Forensic Anthropology Society of Europe (FASE) is to map the existing education and practice opportunities in the field of forensic anthropology in order to support the development of the discipline and to optimize the training courses provided by the Society. To address this goal, an online questionnaire was sent to European and South African practitioners of forensic anthropology and related disciplines in 2016. The results of the questionnaire showed that the status and roles of forensic anthropologists vary depending on the national legal systems, education, and employment status of the practitioners. Despite the fact that the expertise of forensic anthropologists has been increasingly requested in a variety of investigations and the spectrum of tasks has become broader, including identification of living persons, specialized education in forensic anthropology is still restricted to a few graduate and postgraduate programs in European countries and to annual FASE courses.     

Postmortem dental radiography

Comparison of postmortem and antemortem dental radiographic films or digital images is a common procedure for establishing identity of human remains. This article describes some problems with producing postmortem dental radiographs in a medical examiner setting and gives methods for circumventing these difficulties. Resection of the jaws, when permitted, significantly simplifies the postmortem radiographic technique. When producing an actual postmortem panoramic dental radiograph (orthopantomogram) from a dry skull, stabilization of the specimen for exposure by the moving beam source may be accomplished simply by placing the specimen upside down on an anthropologist's skull ring. Image "burnout" in the anterior segment, which results from absence of the tissues of the neck, may be avoided by appropriate placement of radiodense objects such as "zippered" plastic bags filled with water or other fluid material, freezer gel packs, or a block of self-polymerizing acrylic. These methods may increase future postmortem dental radiography efficiency.     

Root Morphology and Anatomical Patterns in Forensic Dental Identification: A Comparison of Computer‐Aided Identification with Traditional Forensic Dental Identification*

Abstract: An online forensic dental identification exercise was conducted involving 24 antemortem–postmortem (AM–PM) dental radiograph pairs from actual forensic identification cases. Images had been digitally cropped to remove coronal tooth structure and dental restorations. Volunteer forensic odontologists were passively recruited to compare the AM–PM dental radiographs online and conclude identification status using the guidelines for identification from the American Board of Forensic Odontology. The mean accuracy rate for identification was 86.0% (standard deviation 9.2%). The same radiograph pairs were compared using a digital imaging software algorithm, which generated a normalized coefficient of similarity for each pair. Twenty of the radiograph pairs generated a mean accuracy of 85.0%. Four of the pairs could not be used to generate a coefficient of similarity. Receiver operator curve and area under the curve statistical analysis confirmed good discrimination abilities of both methods (online exercise = 0.978; UT‐ID index = 0.923) and Spearman’s rank correlation coefficient analysis (0.683) indicated good correlation between the results of both methods. Computer‐aided dental identification allows for an objective comparison of AM–PM radiographs and can be a useful tool to support a forensic dental identification conclusion.     

The third molar as an age marker in adolescents: new approach to age evaluation

Adolescence is a relatively short period between childhood and adulthood. It is very difficult to determine adulthood based on biological indicators. The third molar may be considered a potential age marker for the period between the ages of 16–21. Our study evaluated a set of 1700 panoramic radiographs of individuals aged between 5 and 21 years. Results confirmed the statistically significant difference in the course of third molars development. The mean deviation for individuals with one third molar agenesis is ?0.98 years, for individuals with two third molars agenesis ?1.89 years, and with three molars agenesis ?3.28 years. Thus, the extent of the deviation is directly proportional to the number of unformed third molars. The calculation of age according to the mean of stages of all third molars could lead to the underestimation of age. No intergender differences were found. Age determination using third molars could be used for forensic purposes.     

A Morphological and Morphometric Study of Bite Marks Caused by Mice (Mus Musculus) on Different Baits for Forensic Purposes

In animal bites, the dental attributes can be fundamental in identifying the marks made by various species on different matrices. Although rodent bite marks have been studied in the context of postmortem interference, little research has used different baits to analyze these marks linking not only specific behavior patterns but also the possibility of structural damage. Twenty mice (Mus musculus) were exposed to different baits to study their bite marks in a controlled model. The known pattern of parallel and multiple grooves has been seen in all baits, but polyvinyl chloride and fiber‐optic cable were significantly different between each other and the other baits. Some baits showed patterns of anchorage of the upper incisors and space between the lower incisors when gnawing. This technical note represents a novel model of analysis where veterinarians and/or dentists may be asked to give an opinion on alleged animal bite marks.     

鉴定人的责任负担

鉴定人是司法鉴定活动的决定性因素。鼓励专家参与法庭服务与约束专家独立、客观实施鉴定这一对矛盾需要通过制度的合理设置达到一定的平衡状态,以适合诉讼活动的开展。鉴定人的责任负担是体现对鉴定人实施鉴定活动进行约束的主要手段,也是我国进一步深化司法鉴定体制改革不可回避的重要内容之一。     

Lessons learned from large-scale comparative dental analysis following the South Asian tsunami of 2004

The aim of this study was to examine the quality of the ante-(AM) and postmortem (PM) dental data that were submitted for entry into the PLASS data system in Phuket, Thailand, following the Boxing Day (December 26) Tsunami, 2004. The investigators were two forensic odontologists who were part of the New Zealand Disaster Victim Identification team that worked at Wat Yang Yao morgue and at the Information Management Center in Phuket. Our findings underline the usefulness of dental data in human identification, but point to a number of significant sources of error. Of the 78 PM records received, only 68% of radiographs and 49% of photos confirmed the accompanying dental charting. This underlines the value, particularly of photographs of the dental arches, in quality control. It also points to a large error component, which may have been due to inexperience of the operators, fatigue, poor conditions in the temporary morgue, or the problem of tooth-colored fillings. Of the 106 AM records received, 62% were of unacceptable quality and 64% were either not accompanied by radiographs or had poor quality radiographs. These results indicate that AM data collection ideally needs to be collated and checked by a forensically trained dentist(s) in the country of origin.     

法医毒物鉴定的发展及其问题分析

文章阐述了法医毒物鉴定在对象种类、适用检材、技术方法、应用领域和结果运用方面的发展趋势,分析了现阶段我国毒物鉴定实验室在规范建设、鉴定能力、技术系统和质量控制中存在的问题和缺陷,提出要通过加强鉴定机构及鉴定人的准入控制,建设一支高资质、高水平的队伍;通过执业监管、认证认可、水平测试和质量评估,保障毒物鉴定结果的可靠、准确.     

Forensic dental training in Australia

To facilitate in the identification of victims of a major disaster a trained dental manpower reserve is required. In the state of New South Wales, Australia, an annual three-day training course has been designed to familiarize dentists from both the public and private sectors with identification techniques. The course is aimed to preserve the flexibility of personnel so that they can be utilized in a variety of roles rather than rigidly structuring the make up of a team. It is envisaged though, that in a mass disaster situation teams would be specialized into dental autopsy, antemortem or comparison roles.     

Educating Jurors about Forensic Evidence: Using an Expert Witness and Judicial Instructions to Mitigate the Impact of Invalid Forensic Science Testimony

Invalid expert witness testimony that overstated the precision and accuracy of forensic science procedures has been highlighted as a common factor in many wrongful conviction cases. This study assessed the ability of an opposing expert witness and judicial instructions to mitigate the impact of invalid forensic science testimony. Participants (N = 155) acted as mock jurors in a sexual assault trial that contained both invalid forensic testimony regarding hair comparison evidence, and countering testimony from either a defense expert witness or judicial instructions. Results showed that the defense expert witness was successful in educating jurors regarding limitations in the initial expert's conclusions, leading to a greater number of not-guilty verdicts. The judicial instructions were shown to have no impact on verdict decisions. These findings suggest that providing opposing expert witnesses may be an effective safeguard against invalid forensic testimony in criminal trials.     

Dental CT imaging as a screening tool for dental profiling: advantages and limitations

The use of dental processing software for computed tomography (CT) data (Dentascan) is described on postmortem (pm) CT data for the purpose of pm identification. The software allows reconstructing reformatted images comparable to conventional panoramic dental radiographs by defining a curved reconstruction line along the teeth on oblique images. Three corpses that have been scanned within the virtopsy project were used to test the software for the purpose of dental identification. In every case, dental panoramic images could be reconstructed and compared to antemortem radiographs. The images showed the basic component of teeth (enamel, dentin, and pulp), the anatomic structure of the alveolar bone, missing or unerupted teeth as well as restorations of the teeth that could be used for identification. When streak artifacts due to metal-containing dental work reduced image quality, it was still necessary to perform pm conventional radiographs for comparison of the detailed shape of the restoration. Dental identification or a dental profiling seems to become possible in a noninvasive manner using the Dentascan software.     

Contemporary methods of labeling dental prostheses--a review of the literature

Forensic identification (ID) based on an assessment of the dentition is commonplace. However, despite an increase in the oral health of Western populations, there are still many millions of individuals who are edentulous and whom have been treated with completed dentures. In the United Kingdom alone over 300,000 patients are rendered edentulous each year. In order to facilitate the ID of such individuals a number of forensic and governmental organizations have recommended that dentures be labeled. A number of labeling systems exist which can be broadly separated into inclusion systems, marking systems, and novel methods. Each of the commonly described systems are demonstrated with an assessment of their strengths and weaknesses. It is recommended that an inclusion denture marker, preferably metallic, should be used in order to withstand the most common postmortem assaults.