Differences in morphological age-related dental changes depending on postmortem interval.

Morphological methods for age estimation from teeth have been developed and applied to samples without taking the postmortem interval into consideration. We studied differences in morphological age-related changes between fresh extracted teeth and teeth from human skeletal remains in order to develop appropriate dental age estimation methods according to the time after death. Forty-three permanent teeth from dental patients were compared to 37 teeth obtained from human skeletal remains with a postmortem interval from 21 to 37 years. Morphological age-related changes were investigated by measuring variables on intact and half-sectioned teeth. A new computer assisted image analysis procedure to avoid subjectivity was developed to measure variables in sectioned specimens. Dental color, translucency length, attrition, cementum apposition, and secondary dentin showed higher values in teeth from human skeletal remains than in fresh extracted teeth. Variables obtained by morphometric analysis of computer-generated images (tooth length, tooth width, root length, and root area) showed higher values in fresh extracted teeth than in teeth from skeletal remains. The postmortem interval affects age-related morphological changes, and therefore different methods should be used for teeth of unknown postmortem interval.     

Rates of putrefaction of dental pulp in the Northwest coast environment

Cytological stability is of interest to criminal investigators in instances where remnants of soft tissue have been preserved, since such tissue can aid in the identification of human remains, helping to determine either the sex of the individual or his or her identity. This study based on seven experiments shows that, in Northwest coast outdoor environments in both summer (three experiments) and winter (three experiments), the stability of dental pulp nuclei ranges from 4 days to 2 weeks. The seventh experiment serves to describe the morphological sequence observed in nuclear putrefaction. The specimens included human and pig extracted teeth and unextracted pig teeth. Deposition of the specimens was made both on the surface and in the subsurface (30-cm depth), and the environmental variables were recorded.     

Accuracy of BR Regression Equation for Impacted Teeth in Age Estimation in Haryana Population of India

Abstract:  Dental cementum is a vital tissue that demonstrates continuous apposition throughout the life of a tooth. Positive correlation has been reported between the coronal displacement of cementum and age in impacted teeth and BR regression equation has been proposed. The present study is an attempt to calculate accuracy of BR regression equation in Haryana population of India. The study was conducted on 20 impacted mandibular third molars extracted from healthy patients, aged between 22 and 32 years. The bucco-lingual ground sections were prepared and the distance between the edges of enamel and cementum were measured with micrometer attached to a light microscope and BR regression equation was applied for age estimation. Although the estimated age with BR regression equation was less than chronological age it was not statistically significant. Hence, the BR regression equation can be used in medicolegal as well as in forensic odontology for age estimation.     

Dental CT imaging as a screening tool for dental profiling: advantages and limitations

The use of dental processing software for computed tomography (CT) data (Dentascan) is described on postmortem (pm) CT data for the purpose of pm identification. The software allows reconstructing reformatted images comparable to conventional panoramic dental radiographs by defining a curved reconstruction line along the teeth on oblique images. Three corpses that have been scanned within the virtopsy project were used to test the software for the purpose of dental identification. In every case, dental panoramic images could be reconstructed and compared to antemortem radiographs. The images showed the basic component of teeth (enamel, dentin, and pulp), the anatomic structure of the alveolar bone, missing or unerupted teeth as well as restorations of the teeth that could be used for identification. When streak artifacts due to metal-containing dental work reduced image quality, it was still necessary to perform pm conventional radiographs for comparison of the detailed shape of the restoration. Dental identification or a dental profiling seems to become possible in a noninvasive manner using the Dentascan software.     

Multiple regression models for age estimation by assessment of morphologic dental changes according to teeth source

The aims of this study were twofold: (1). to measure parameters that contribute significantly to estimates of dental age, using a combination of classic methods and a computer-assisted image analysis procedure to avoid the bias inherent in observer subjectivity; and (2). to develop new mathematical regression models for age prediction according to postmortem interval. Two different populations were studied. Forty-three permanent teeth (Group I), extracted for valid clinical reasons, were taken from patients 25-79 years of age. The other population group (Group II) was composed of 37 healthy erupted permanent teeth obtained from human skeletal remains (age 22-82 years) with a postmortem interval ranging from 21 to 37 years. Morphologic age-related changes were investigated by measuring variables on intact and half-sectioned teeth. Multiple regression analyses were performed with age as the dependent variable for each sample source. In fresh extracted teeth, the variables that made the greatest contributions to predictions of age were dental attrition, dentin color, and translucency width, the latter measured with a computer-assisted image analysis method. In teeth from human skeletal remains, the variables that made the greatest contributions to age calculation were cementum apposition, pulp length measured by computer-assisted image analysis, dental attrition, root translucency, and dental color. We conclude by recommending different regression models to calculate age depending on the postmortem interval.     

The Use of Tooth Crown Measurements in the Assessment of Ancestry

As the hardest tissue in the body, teeth have the potential to offer a wealth of biological information to the forensic anthropologist, which can include the assessment of ancestry. Using a large data set of dental measurements, the efficacy of mesiodistal and buccolingual tooth dimensions to discriminate between broad, geographically based groups is explored. A general pattern is identified: African populations have the largest teeth, Asians possess teeth of intermediate size, and Europeans have the smallest teeth. In a discriminant function analysis using crown measurements of all teeth (mandibular and maxillary and excluding the third molar), individuals were correctly classified in 71.3% of cases. When the sex of the individual is known, classification is improved up to 88.1% in females and 71.9% of males (cross‐validated). Based on these results, we argue that dental metrics can be regularly employed as part of the development of the biological profile.     

Methods for the analysis of hard dental tissues exposed to high temperatures

The preservation of teeth that have been exposed to a heat source is a key factor in order to keep their value as evidence. This research paper presents some methods under development for the analysis of dental evidence after exposure to high temperatures; it also establishes age related alterations of young and aged teeth which have been exposed to direct heat. A total of thirty permanent healthy teeth (young=15 and old=15) were submitted to direct heat (n=14) and to a controlled raise of temperature (n=16); they were embedded in polymethylmetacrilate. For the macroscopic study, blocks were cut in half, polished and their surfaces were digitalized. Subsequently, blocks were put in slides, worn away and observed through a photomicroscope. The study of the colorimetric pattern was done by Corel Photo Paint 12.0 and Image J. software. All teeth submitted to the gradual raise of temperature presented a degree of structural damage lower than those exposed to direct heat. The internal surface of young teeth exposed to direct heat showed lines of fracture oblique to the long axis of the tooth; in contrast, a reticular pattern was observed on aged teeth. All teeth exposed to direct heat showed some matte-black coloration areas, while those submitted to a gradual increment of temperature showed a greyish colour in the enamel and a chalky-white in the cementum. By using both thermal treatments in young teeth, the amelodentinal junction was lost, thus preserving the integrity of each tissue. In aged teeth, the separation of this junction was produced because of the breakdown of the dentine. Microscopically, in teeth exposed to direct heat, it was neither possible to differentiate the dentin from the cementum, nor to distinguish the incremental lines of the latter; while in those submitted to a controlled increment of temperature, the corresponding morphology in the tissues was observed. A significant statistical difference was obtained for black colour among young and aged teeth exposed to direct heat, as well as among the means of all colours obtained from the teeth exposed to both treatments. The structural changes observed allow locating a tooth in the studied age groups. Our results show the viability of the applied method for the processing of samples, allowing their preservation as evidence during an indefinite time.     

A Test of Age Estimation Methods on Impacted Third Molars in Males

This study tests the relationship between third molar impaction and its concomitant effect on age estimation methods. Data were collected on radiographs of males analyzed in the Defense POW/MIA Accounting Agency Laboratory (n = 114). Radiographs of skeletonized individuals were scored for dental development, and age was assigned based on the appropriate ancestry‐based method. Differences between identified age and estimated dental age were assessed to determine whether molar impaction affected root development and age estimations. Results indicate that impacted teeth tend to be underdeveloped and result in age estimates that are too low. While these results are of note to anthropologists and odontologists performing dental age estimates, more work is needed to explore the effect of impaction on development among a more diverse sample.     

A Bayesian approach to estimate skeletal age-at-death utilizing dental wear

In the forensic context, teeth are often recovered in mass disasters, armed conflicts, and mass graves associated with human rights violations. Therefore, for victim identification, techniques utilizing the dentition to estimate the first parameters of identity (e.g., age) can be critical. This analysis was undertaken to apply a Bayesian statistical method, transition analysis, based on the Gompertz-Makeham (GM) hazard model, to estimate individual ages-at-death for Balkan populations utilizing dental wear. Dental wear phases were scored following Smith's eight-phase ordinal scoring method and chart. To estimate age, probability density functions for the posterior distributions of age for each tooth phase are calculated. Transition analysis was utilized to generate a mean age-of-transition from one dental wear phase to the next. The age estimates are based on the calculated age distribution from the GM hazard analysis and the ages-of-transition. To estimate the age-at-death for an individual, the highest posterior density region for each phase is calculated. By using a Bayesian statistical approach to estimate age, the population's age distribution is taken into account. Therefore, the age estimates are reliable for the Balkan populations, regardless of population or sex differences. The results showed that a vast amount of interpersonal variation in dental wear exists within the current sample and that this method may be most useful for classifying unknown individuals into broad age cohorts rather than small age ranges.     

Detection and classification of composite resins in incinerated teeth for forensic purposes

The great demand for esthetic restorations has resulted in placement of large numbers of composite resin fillings. The popularity of these materials is reflected in the quantity and variety of resin brands currently on the market. The ability to distinguish resin brands can aid in positive identification of burn victims, assuming that appropriate dental records exist. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) was used to characterize the structure and composition of 10 modern resins. The structure of each resin was unique to manufacturer, and elemental analysis allowed separation into distinct groups. These 10 resins were also placed in extracted teeth and incinerated at 900 degrees C for 30 min, simulating near cremation conditions. The resins were identifiable by SEM/EDS after incineration, and the elemental composition remained almost unchanged. The data produced are immediately useful for resin identification in forensics, and comparative analysis can be readily performed using standard equipment. This work represents the initial stage of database generation.     

The Analysis of a World War I U.S. Service Member's Dental Remains Recovered in France

In October 2009, the grave of an unknown World War I (WWI) U.S. service member was exhumed in Rembercourt‐Sur‐Mad Village, in the Lorraine Region of France. The skeletal remains and material evidence were accessioned into the Joint POW/MIA Accounting Command's (JPAC) Central Identification Laboratory (CIL). The personnel records for the associated casualty were requested, received, and reviewed. A dental profile was present among the service member's personal information. There were multiple points of concordance between the dental records of the associated casualty, and the recovered dental remains to include eight restored teeth, 15 unrestored teeth, and three antemortem missing teeth. Distinctive restorations which compared favorably included a porcelain crown and multiple gold foil fillings. All lines of evidence (historical, material evidence/personal effects, anthropological, and dental) and the circumstances of loss compared positively with the associated casualty. On April 1, 2010, the previously unaccounted‐for U.S. service member was positively identified and on June 23, 2010, was buried with full military honors at Arlington National Cemetery.     

Yet another method for marking incisal edges of teeth for bitemark analysis

Over the years many methods have been proposed and presented for marking or "highlighting" the incisal edges of anterior teeth on a dental stone model -- one of the critical steps in production of transparent overlays for bitemark analysis. A method is presented here that is an extension and refinement of the "paint the edges" method shown at least as early as 1966 by Gustafson. This method uses "invisible ink" and ultraviolet illumination to produce a very high contrast image of the incisal edges of the teeth on the model. The advantages of this new method are that it is nondestructive, it does not leave visible marks on the models, operator subjectivity in selecting the portions of anterior teeth to be highlighted is reduced, and the author submits that this technique lends itself to easy construction of overlays using computer image-processing software such as Adobe Photoshop and ImageJ.     

Aqua-eroticum: an unusual autoerotic fatality in a lake involving a home-made diving apparatus

The term Aqua-eroticum was first introduced in 1984 by Sivaloganathan to describe the unusual autoerotic death of a man using submersion as an asphyxia method. This was the first case of that kind, and since then, no other case of autoerotic submersion has been reported, nor other autoerotic fatality in open water. Here we report the case of a 25-year-old man, nude under a home-made plastic body suit, overdressed for the season with winter clothes and restrained by complex bondage. He was submersed, tied underwater to a boat and was using a home-made diving apparatus for air supply. Death was ruled as accidental autoerotic asphyxia from rebreathing, caused by the faulty air-supply device.     

Clinically Detectable Dental Identifiers Observed in Intra‐oral Photographs and Extra‐oral Radiographs,Validated for Human Identification Purposes

Screening the prevalence and pattern of dental identifiers contributes toward the process of human identification. This research investigated the uniqueness of clinical dental identifiers in photographs and radiographs. Panoramic and lateral cephalometric radiographs and five intra‐oral photographs of 1727 subjects were used. In a target set, two observers examined different subjects. In a subset, both observers examined the same subjects (source set). The distance between source and target subjects was quantified for each identifier. The percentage of subjects in the target set being at least as close as the correct subject was assessed. The number of molars (34.6%), missing teeth (42%), and displaced teeth (59.9%) were the most unique identifiers in photographs and panoramic and lateral cephalometric radiographs, respectively. The pattern of rotated teeth (14.9%) was the most unique in photographs, while displaced teeth was in panoramic (37.6%) and lateral cephalometric (54.8%) radiographs. Morphological identifiers were the most unique, highlighting their importance for human identifications.     

Use of diagonal teeth measurements in predicting gender in a Turkish population

Mesiodistal and buccolingual measurements, commonly used as a means of sex determination from teeth, can sometimes cause difficulties. The aim of this study is to test whether diagonal measurements can make it possible to take more accurate measurements. The results of diagonal measurements of dental casts taken from 30 males and 30 females have been evaluated by discriminant function statistics. Intra- and interobserver error tests did not indicate any statistically significant differences between the findings of two observers. Seven of the 14 measurements on the maxilla and 10 of the 14 measurements on the mandible have been found to be significantly greater in males. According to the results of the stepwise discriminant function statistics, the most contributory measurements to the function were upper first incisor mesiobuccal-distolingual (MBDL) and distobuccal-mesiolingual, lower second incisor MBDL, and lower canine MBDL. The highest reliability was obtained in MBDL measurements. It was realized that diagonal measurements of teeth, especially of canines, revealed clear dimorphic differences. Classification accuracy was found to be 83.3% for total sample, 78.3 for upper jaw, and 85.0% for the lower jaw. Accuracy rate was higher in the lower teeth. Commonly seen orthodontic anomalies, such as tooth rotations, crowding, attritions, deep dentin-enamel junction defects, and certain types of fillings, could make it difficult to correctly take width measurements or could cause other mistakes to occur. This explains the reason why this research has been considered to be of some use in diagonal measurements, which is an accurate method, particularly when employed for the front teeth.     

Seasonal Variation of Carcass Decomposition and Gravesoil Chemistry in a Cold (Dfa) Climate

It is well known that temperature significantly affects corpse decomposition. Yet relatively few taphonomy studies investigate the effects of seasonality on decomposition. Here, we propose the use of the Köppen‐Geiger climate classification system and describe the decomposition of swine (Sus scrofa domesticus) carcasses during the summer and winter near Lincoln, Nebraska, USA. Decomposition was scored, and gravesoil chemistry (total carbon, total nitrogen, ninhydrin‐reactive nitrogen, ammonium, nitrate, and soil pH) was assessed. Gross carcass decomposition in summer was three to seven times greater than in winter. Initial significant changes in gravesoil chemistry occurred following approximately 320 accumulated degree days, regardless of season. Furthermore, significant (p < 0.05) correlations were observed between ammonium and pH (positive correlation) and between nitrate and pH (negative correlation). We hope that future decomposition studies employ the Köppen‐Geiger climate classification system to understand the seasonality of corpse decomposition, to validate taphonomic methods, and to facilitate cross‐climate comparisons of carcass decomposition.     

Differentiation of traumatic and heat-induced dental tissue fractures via SEM analysis

Previous studies have examined the effects of heating on teeth; however, none have identified characteristics that allow analysts to differentiate traumatic from heat-induced fractures. This study examined our ability to discern notable differences in preincineration traumatic fractures and heat-induced fractures in postincineration dentition. Twelve anterior dental specimens were subjected to blunt force trauma while a second set were not. All 24 samples were then incinerated in a muffle furnace at a peak temperature (900°C) consistent with house fires. The specimens were subsequently examined with a scanning electron microscope to identify and compare heat-induced and traumatic fractures. The results obtained during examination yielded no differences between the features displayed by specimens that had been inflicted with preincineration trauma and those that did not. Unlike bone, distinguishing features for the differentiation of traumatic and heat-induced fractures could not be compiled.     

A Retrospective Review of Forensic Odontology Reports Written by the Joint POW/MIA Accounting Command Central Identification Laboratory for Remains Identified from the Korean War

As of August 2014, the Joint POW/MIA Accounting Command has identified the remains of 1980 previously unknown U.S. service members; 280 were from the Korean War. To determine the accuracy and completeness of the available antemortem (AM) dental records, a review of the AM/postmortem (AM/PM) dental record comparisons from 233 Forensic Odontology Reports written in support of remains identified from the Korean War was performed. Seventy‐two AM/PM comparisons resulted in exact dental chartings while 161 contained discrepancies which were explainable. Explainable discrepancies include undocumented treatment (103), incorrectly charted third molars as missing (82), differing opinions of specific molars present/missing (20), and erroneous treatment documentation and/or misidentification of teeth present/missing (22, other than molars). Reassessment has revealed varying levels of completeness for our available AM dental records, the need to thoroughly review our computerized comparisons, adjust our comparisons to include molar pattern variations/third molars, and updating our database comparison program.     

A technique to capture, analyze, and quantify anterior teeth rotations for application in court cases involving tooth marks

Anterior teeth within the human dentition have a specific numerical rotation value. Bite marks show an array of angled indentations, abrasions, microlacerations, and contusions. These marks generally represent the incisal surfaces of the suspect's dentition reflecting the rotation values of the teeth in the dental arch. This study described a method for capturing and analyzing anterior dental rotations. The rotations of individual anterior teeth within the study population were categorized as common, uncommon, and very uncommon according to Allen's classification. In the absence of a large number of incisal patterns present in a bite mark, a single but heavily weighted tooth rotation could be of equal discriminatory potential to several common rotation values. No prevalence studies quantifying individual tooth rotations are available. The measurement of each individual tooth rotation together with its individual discrimination potential will enhance the evaluation of the concordant features observed in bite marks.     

Usefulness of Forensic Dental Symbols© and Dental Encoder© database in forensic odontology

Abstract: A new universal graphic dental system, Forensic Dental Symbols^©, has been created to provide precision in the construction of dental records, improve standardization, and increase efficiency in dental identification procedures. Two hundred and thirty‐four different graphic symbols representing the most frequent clinical status for each tooth were designed. Symbols can be then converted to a typographic font and then are ready to use in any computer. For the appropriate use, manipulation, and storage of dental information generated by the Forensic Dental Symbols^©, Dental Encoder^© database has been created. The database contains all the information required by INTERPOL Disaster Victim Identification (DVI)‐dental‐forms. To explore the possibilities that Dental Encoder^© offers, an antemortem dental database from a Spanish population of 3920 military personnel had been constructed. Data generated by Dental Encoder^© were classified into sex and age groups. The program can perform an automatic search of the database for cases that match a selected clinical status presented in a single tooth or a combination of situations for several teeth. Moreover, Dental Encoder^© allows information to be printed on INTERPOL DVI‐dental‐forms, or the inclusion of any completed form into any document, technical report, or identification of dental report.