The transfer of human DNA by Lucilia cuprina (Meigen) (Diptera: Calliphoridae)

Blowflies leave deposits, termed artefacts, through the processes of excretion and regurgitation. To date, little consideration has been given to the possibility of adult blowflies consuming biological material and subsequently acting as vectors of human DNA through these artefacts. In this study, Lucilia cuprina (Meigen) (Diptera: Calliphoridae) were fed either human blood or human semen ad libitum and their artefacts were analysed for human DNA content. Samples containing 1, 10, 30 and 50 artefacts were tested. Quantifiable and typeable levels of human DNA were found in samples derived from both food sources, and even in samples containing a single artefact. Semen-derived artefacts contained significantly more human DNA than artefacts produced after a blood meal. Consequently a smaller number of artefacts was required to collect sufficient DNA for genotyping. These findings are forensically important as it provides investigators with another potential source of DNA at a crime scene where a body has been moved, or an attempt has been made to clean up biological material. They also highlight how fly artefacts could potentially contaminate and compromise evidence.     

Validation of the MiniFiler™ Kit in archaeological samples

We evaluate the usefulness of MiniFiler™ Kit in the field of ancient DNA. A set of samples belonging to different locations from Iberian Peninsula, with ages ranging from Neolithic to XVII century, was tested. Results could be replicated in only one burial site, probably due to the taphonomic conditions. Other cases could only produce partial or none genetic profiles.     

The Use of Hemastix® and the Subsequent Lack of DNA Recovery Using the Promega DNA IQTM System

Abstract:  Following implementation of our automated process incorporating the Promega DNA IQ^TM system as a DNA extraction method, a large number of blood-containing exhibits failed to produce DNA. These exhibits had been tested with the Hemastix^® reagent strip, commonly used by police investigators and forensic laboratories as a screening test for blood. Some exhibits were even tainted green following transfer of the presumptive test reagents onto the samples. A series of experiments were carried out to examine the effect of the Hemastix^® chemistries on the DNA IQ^TM system. Our results indicate that one or more chemicals imbedded in the Hemastix^® reagent strip severely reduce the ability to recover DNA from any suspected stain using the DNA IQ^TM magnetic bead technology. The 3,3',5,5'-tetramethylbenzidine (TMB) used as the reporting dye appears to interact with the magnetic beads to prevent DNA recovery. Hydrogen peroxide does not seem to be involved. The Hemastix^® chemistries do not interfere in any way with DNA extraction performed using phenol-chloroform. The incompatibility of the Hemastix^® chemistries on the DNA IQ^TM system forced us to adopt an indirect approach using filter paper to carry out the presumptive test.     

Human eye colour and HERC2, OCA2 and MATP

Prediction of human eye colour by forensic genetic methods is of great value in certain crime investigations. Strong associations between blue/brown eye colour and the SNP loci rs1129038 and rs12913832 in the HERC2 gene were recently described. Weaker associations between eye colour and other genetic markers also exist. In 395 randomly selected Danes, we investigated the predictive values of various combinations of SNP alleles in the HERC2, OCA2 and MATP (SLC45A2) genes and compared the results to the eye colours as they were described by the individuals themselves. The highest predictive value of typing either the HERC2 SNPs rs1129038 and/or rs12913832 that are in strong linkage disequilibrium was observed when eye colour was divided into two groups, (1) blue, grey and green (light) and (2) brown and hazel (dark). Sequence variations in rs11636232 and rs7170852 in HERC2, rs1800407 in OCA2 and rs16891982 in MATP showed additional association with eye colours in addition to the effect of HERC2 rs1129038. Diplotype analysis of three sequence variations in HERC2 and one sequence variation in OCA2 showed the best discrimination between light and dark eye colours with a likelihood ratio of 29.3.     

Attitudes towards police use of consumer/private DNA databases in investigations

Consumer DNA products, such as databases that allow the public to explore familial relationships, have recently been used by police to assist in investigations. This has moved the collection of DNA used in criminal investigations away from the limitations of criminal databases and has opened up ethical concerns regarding privacy and consent. This study explored public attitudes and support towards police use of consumer DNA databases in investigations to assess whether different crime types or moral and attitude alignments influenced the level of public support of police using these consumer products. An international survey of 438 adults, using theory and scales pertaining specifically to retributive punishment and attitudes towards law, courts and police, found that moral alignment and attitudes did influence the level of public acceptability towards police usage of these techniques and that support did vary based on crime type. This research found that higher levels of public support was given for the most serious case types explored (sexual assault and homicide). Participant support for police access to private DNA databases by case type was as follows; 83.5% for sexual assault, 83.2% for homicide, 85.2% for identifying unidentified human remains, 62.8% for robbery and 58.9% for illicit drug related cases. Small to medium effects sizes were observed for these results. Although these findings provided context towards public attitudes, further research specific to international attitude differences and variance between serious crime types and public acceptability could further develop these findings.     

Parentally imprinted allele (PIA) typing in the differentially methylated region upstream of the human H19 gene

The H19 gene is a paternally imprinted gene located on chromosome 11p15.5. In this study, the H19FR1 and H19FR2 haplotype polymorphisms including four and three SNPs, respectively, upstream of the H19 gene according to the GenBank sequence (accession no. AF125183) were investigated. Five haplotypes and nine genotypes were detected for H19FR1 in the Chinese Han population by means of PCR and subsequent denaturing gradient gel electrophoresis (DGGE). The power of discrimination (Dp), polymorphism information content (PIC) and probability of paternity exclusion (PE) were estimated to be 0.803, 0.58 and 0.322, respectively. For the H19FR2, two haplotypes and three genotyes were observed, and the Dp, PIC and PE were 0.626, 0.37 and 0.162, respectively. Sequencing results showed that only two of the four reported SNPs, a7342g and g7547a, were detected in H19FR1 in the Chinese Han population, and two new SNPs, g7351c and a7357g, were found. In the H19FR2 region, only one of the three reported SNPs, a8097g, was detected. Based on the methylation status of the genomic DNA, selective detection of the parental alleles for H19FRs was examined by using two types of enzymes, the methylation-sensitive restriction enzyme (msRE) HpaII or HhaI and McrBC. Genomic DNA digested by either HpaII or HhaI, revealed a single band derived from the paternal allele, as a result of cleavage of unmethylated recognition sites on the maternal allele. On the contrary, the use of McrBC, which can digest a methylated paternal sequence, resulted in exclusively amplifying the maternal allele. This parentally imprinted allele (PIA) typing method could be one of the useful techniques for discriminating the parental origin of alleles.     

DNA Typer~(TM)15 plus直扩试剂盒在DNA数据库建设中的应用

目的测试DNA TyperTM15 plus直扩试剂盒的技术性能指标,评价其在DNA数据库建设中的应用价值。方法采用DNA TyperTM15 plus试剂盒,并使用IdentifilerTM和DNA TyperTM15试剂盒进行比较,设定不同体系和引物量、不同退火温度和循环次数以进行方法验证;设定不同模板量标准品、不同比例混合样本,取猪、狗、兔等动物的血液样品,血痕、骨骼、唾液斑等常见检材样本以及不同建库样本,以验证试剂盒灵敏度、特异性、稳定性以及混合样本、常见检材及建库样本的检测能力。结果直扩试剂盒分型结果准确,重复性好,灵敏度可达0.125ng,不同批次间试剂检测结果稳定,对不同检材有很好的适应性。10μL扩增体系时FTA卡和加强型血液采集卡取样直径应为0.5mm,而血滤纸、血液采集卡样本和经典型血液采集卡取样直径应为1.0mm。结论 DNA TyperTM15 plus直扩试剂盒的性能可以满足DNA数据库建设及检案的需要,可在相关实验中选择使用。     

Efficiency of Casework Direct Kit for extraction of touch DNA samples obtained from cars steering wheels

Analysis of STR profiles obtained from touch DNA has been very useful to the elucidation of crimes. Extraction method may be determinant for the recovery of genetic material collected from different surfaces. Vehicle theft is one of the most common crimes in São Paulo city, Brazil, but collection of biological traces in car steering wheels is not considered, because of the belief that profiles generated won’t be able to identify the thief, only the owner. This study aimed to analyze the efficacy of extraction methods for obtaining DNA profiles in samples collected from steering wheels. Eight criminal acts were simulated with 2 different individuals each (mixture of victim and thief), in duplicate, in order to compare two extraction methods: DNA IQ™ and Casework Direct Kit (both Promega Corporation). Genetic material was collected by double swab method and quantified by Quantifiler™Trio (ThermoFisher Scientific). Amplification was conducted with PowerPlex® Fusion System (Promega). It was possible to obtain STR profiles for all experiments. The mixtures were compared with reference profiles to evaluated how many alleles of each donor were observed. Samples extracted with Casework Direct Kit obtained STR profiles with higher averages of alleles for primary and secondary donors (88.7% and 59.9%, respectively) than those extracted with DNA IQ™ (60.4% and 38.1%, respectively). This could be explained by the differences established in the protocols of both methods, since DNA IQ™ is based on successive washes and can result in loss of DNA, whereas Casework Direct Kit minimizes this problem. We concluded that Casework Direct Kit was more efficient for processing touch DNA samples than DNA IQ™.     

DNA Purification Cell Lysis and Wash Step Modifications for Low-Template DNA Sample Processing,

As DNA technology becomes increasingly sensitive, forensic laboratories are receiving more low-template DNA samples. These samples, already low in DNA content, become even more challenging to process as the available DNA becomes further reduced during the extraction step. In this study, two extraction modifications were tested to determine if the cause of DNA loss could be identified and mitigated. A double lysis technique was used to test for DNA loss in the sample collection substrate, and lysate eluates were re-extracted to determine DNA loss from inefficient binding to the silica column. Both modifications showed DNA was lost at these steps. However, resulting STR profiles from these samples had fewer peaks and lower peak heights when compared to samples processed with no extraction modifications. Overall, the potential benefits of adding these extraction modifications for low-template DNA sample processing are not enough to justify the risk associated with additional manipulation.     

法医DNA分析的其他应用

综述了法医DNA的多种用途,如人死后根据体内DNA变化情况推断死后时间间隔,利用线粒体DNA4977bp的缺失以及端粒的长度推断年龄;利用昆虫mtDNA的细胞色素氧化酶亚基I进行昆虫种属鉴定,以帮助确定人的腐尸死亡时间;利用一些食血昆虫体内的人DNA帮助了解与案件的关系;利用DNA标记进行动物如犬、牛、马及猪等个体识别与亲子鉴定,解决因动物引起的纠纷,或者利用DNA分析嫌疑人周围的动物毛发、植物及土壤微生物等,确定嫌疑人与案件的关系。     

Remedies for damage to property: money damages or restitution in natura?

This paper compares the tort remedies of money damages and restitution in natura from an efficiency perspective. Although there is a parallel between these remedies and the remedies for breach of contract, i.e. money damages and specific performance, the analysis is fundamentally different in torts, because of the high transaction costs involved. The basis of the comparison is the relation of each of the remedies to the subjective loss for the victim. The conclusion drawn is that no rule is generally preferable, so it is crucial to sort the different types of cases and apply in each of them the remedy, which is better suited. On this premise, are evaluated the relevant rules of Germany, England and France, since each legal system tackles this issue differently.     

Optimization and validation of a fast amplification protocol for AmpFlSTR Profiler Plus for rapid forensic human identification

The goal of this work was to optimize and validate a fast amplification protocol for the multiplex amplification of the STR loci included in AmpFlSTR^® Profiler Plus^® to expedite human DNA identification. By modifying the cycling conditions and by combining the use of a DNA polymerase optimized for high speed PCR (SpeedSTAR™ HS) and a more efficient thermal cycler instrument (Bio-RAD C1000™), we were able to reduce the amplification process from 4 h to 26 min. No modification to the commercial AmpFlSTR^® Profiler Plus^® primer mix was required. When compared to the current Royal Canadian Mounted Police (RCMP) amplification protocol, no differences with regards to specificity, sensitivity, heterozygote peak height ratios and overall profile balance were noted. Moreover, complete concordance was obtained with profiles previously generated with the standard amplification protocol and minor alleles in mixture samples were reliably typed. An increase in n − 4 stutter ratios (2.2% on average for all loci) was observed for profiles amplified with the fast protocol compared to the current procedure. Our results document the robustness of this rapid amplification protocol for STR profiling using the AmpFlSTR^® Profiler Plus^® primer set and demonstrate that comparable data can be obtained in substantially less time. This new approach could provide an alternative option to current multiplex STR typing amplification protocols in order to increase throughput or expedite time-sensitive cases.     

Simulating transfer and persistence of a chemical marker powder for Lycopodium clavatum spores

In this research a chemical marker powder, based on Lycopodium clavatum spores, was studied to determine its transfer and persistence on a T-shirt. Such chemical marker powders are used to provide evidence that a person has handled a covertly marked object, such as a drug package. The powder was found to transfer readily between a marked item and the person handling it. The powder was found to persist on a T-shirt for up to 13 h; however, there was only a very small amount of powder remaining at this time. The rate of loss of the L. clavatum spores was found to follow a decay curve. The largest decrease in spores from the T-shirt was seen in the first 2 h after the marked item had been handled.     

STR and SNP analysis of human DNA from Lucilia sericata larvae's gut contents

Importance of forensic entomology becomes inevitable when come across some incident where corpse is unidentifiable and lot of maggots or other insects are present. The most common application of forensic entomology is to use insects for the identification of specimens or human remains. DNA analysis recovered from a larva's gut contents can be used to identify a missing body. The obtained human STR and SNP profile support the association of a maggot to a specific patients or corpse. Main aim of this research was the identification of human DNA from gut contents of third instar maggots (larvae of Lucilia sericata) placed on diabetic patient's wounds for treatment purpose. Maggots (8–15) were taken from each diabetic patients (no. of the patients 8) and DNA was extracted from the gut contents manually by using Qiagen tissue protocol. Agarose gel electrophoresis was performed and the total size of DNA was seen using UV transilluminator. PCR amplification, STRs and SNPs profiling was then performed using PCR 9700 and AmpFLSTR Identifiler and SnaPshot Multiplex Kit (Applied Biosystems) respectively. The results were analyzed on ABI 310. SNP profiles were good and identifiable compared to the STRs where amplification was poor and the peaks were low. This may be the fact of the enzymatic activity present in the gut of the larvae which cause tremendous reduction in DNA size and thus yield. The results of this study reveals that it is possible to obtain a complete human profile using STRs and SNPs even if DNA is recovered from gut contents of maggots.     

Genetic identification of biological samples buried in clay soil during summer and winter seasons

The analysis of a biological samples found in crime scenes can be a challenging task. Minute amount of DNA, degraded DNA and the presence of inhibitors in biological samples, can interfere with the achievement of a complete genetic profile.Chelating resin, silica membranes and silica-coated with paramagnetic resin were the techniques used in this study for the isolation and purification of DNA. Our aim was to find out the best DNA extraction method for application in the presence of biological samples buried in clay soil.     

Analysis of AmpFlSTR MiniFiler™ loci and its forensic application

The allele frequencies of eight MiniFiler™ loci have been analyzed in 101 Japanese individuals living in Kanagawa with informed consent by means of ABI 310 Genetic Analyzer. A total of 7 alleles for D13S317, 8 alleles for D7S820, 11 alleles for D2S1338, 11 alleles for D21S11, 5 alleles for D16S539, 14 alleles for D18S51, 8 alleles for CSF1PO, and 13 alleles for FGA were observed. The polymorphic profiles of these MiniFiler™ loci in the present study were essentially the same as those obtained by using the AmpFlSTR^® Identifiler^® PCR Amplification kit. The combined matching probability of eight MiniFiler™ loci and cumulative probability of paternity exclusion were estimated as 1.97 × 10⁻¹⁰ and 0.9996, respectively. The MiniFiler™ kit was useful for individual identification in forensic analysis.     

Automated Quantifiler quantitative PCR setup, template normalization and PCR setup using HID EVOlution™ qPCR/STR setup on trace evidence samples

We have implemented and validated customized protocols for automated Quantifiler^® setup, template normalization and PCR setup using the Tecan HID EVOlution™ qPCR/STR setup. The protocols were validated for the Quantifiler^® human DNA quantification, AmpF?STR^® SGM Plus^® and SEfiler Plus™ PCR Amplification Kits (Applied Biosystems) according to EN/ISO 17025.     

Validation of the InnoXtract™ DNA extraction method for bone,teeth, and rootless hair

Forensic casework samples often include human hairs, teeth, and bones. Hairs with roots are routinely processed for DNA analysis, while rootless hairs are either not tested or processed using mitochondrial DNA. Bones and teeth are submitted for human remains identifications for missing persons and mass disaster cases. DNA extraction from these low templates and degraded samples is challenging. The new InnoXtract DNA extraction method utilizes magnetic beads that are optimized to bind small DNA fragments, as small as 100 base pairs, to purify high-yield DNA from compromised samples. This validation study evaluates InnoXtract's ability to obtain amplifiable DNA from samples such as rootless hairs and skeletal remains. Studies performed include sensitivity, stability, repeatability, reproducibility, non-probative samples, and comparison to standard organic extractions. Sensitivity studies demonstrate average yield recoveries ranging from 53% to 100% and 73% to 85% for the InnoXtract hair and bone methods, respectively. Studies demonstrate consistent results across a range of sample types, such as insulted and un-insulted bone and teeth, as well as hair shafts from donors of various ages, gender, race, and hair characteristics. The InnoXtract bone method outperformed organic extraction. The method was successfully automated on a MagMAX™ Express-96, with recoveries over 70% relative to the manual version. InnoXtract has the potential as an automated high-throughput, high-yield bone extraction method with 6 h of total extraction time for up to 96 samples. The validation study results demonstrate that the InnoXtract kits produce high-yield and high-quality DNA from compromised bone, teeth, and hair shaft samples.     

Determination of Malathion levels and its effect on the development of Chrysomya megacephala (Fabricius) in South China

The present study determines the concentration of Malathion in rabbit tissues and Dipteral larvae feeding on those tissues. Malathion was found in all muscle and liver samples of the test rabbit, as well as larvae fed on it. Samples from the control rabbit and pupae from all colonies were negative for Malathion. Correlations were found between administered dosage, tissue concentrations and younger or prepuparial larvae. Effects of Malathion on the development rate of Chrysomya megacephala (Fabricius) were also reported. C. megacephala is the most common fly species found on corpses in South China during the early stages of decomposition. Significant differences in larval growth rate were both observed among the colonies fed on muscle and liver. The presence of Malathion in both muscle and liver appears to retard the normal growth rate of C. megacephala in larval stage. Larvae from all colonies fed on tissues from rabbits treated with Malathion were smaller and attained maximum length later than those from the control colony. Duration of the larval and pupal stages was both significantly prolonged for larvae on tissues from rabbit receiving Malathion than those from the control colony. The difference of the duration of the larval and pupal stages together from the muscle colonies would alter the postmortem interval estimation by up to 36 h. As for liver colonies, it would alter the postmortem interval estimation by up to 28 h. A significantly different duration of the larval and pupal stages from the muscle colonies would alter a postmortem estimate by up to 28 h relative to the liver colonies.     

Visualising DNA transfer: Latent DNA detection using Diamond Dye

A central question is ‘how did DNA get there’? To help answer this, we visually monitored and recorded DNA transfer from one substrate to another. When an individual touches a substrate, traces of their DNA are transferred (primary/direct) which can then subsequently be transferred to a second substrate (secondary/indirect). Currently DNA transfer and how much remains can only be determined by collecting the biological material from the substrate, isolating the DNA and quantifying the amount recovered. However, Diamond™ Dye (DD) enables such DNA transfer events to be visualised by monitoring the movement of cellular material.We examined primary and secondary DNA transfer using aluminium as a primary substrate with cotton, polyester, aluminium and plastic as secondary substrates and four contact types between two substrates (passive, pressure, friction and friction with pressure). Participants pressed their index finger against the aluminium for 15 s and then DD was applied to the area of contact; cellular material was detected via a fluorescence microscope. Contact between that substrate and a second substrate was performed, using one of the four contact types. After this contact between substrates each was viewed microscopically and transfer of cellular material was recorded.Cellular material could be recorded as having transferred from one substrate to another. Substrate and contact type had an effect on the extent DNA transfers. DNA transferred at a high rate with aluminium as a primary substrate and cotton, polyester and aluminium as secondary substrates when pressure with friction was applied. This information expands our understanding of how DNA transfers and which factors affect it, thus assisting greatly with activity level reporting as to how DNA came to be where it was found.