Comparison of injuries caused by the pistols Tokarev, Makarov and Glock 19 at firing distances of 10, 15 and 25cm

Firings at cloth targets and at human skin from autopsy material were performed from the pistols 7.62 mm Tokarev (TT), 9 mm Makarov (PM) and 9 x 19 mm Glock 19 with common ammunition. The differences were in the soot deposit pattern, the degree of scorching of the synthetic fibres on the edges of the entrance hole and in the findings of the soot and the gunpowder particles. The results were similar on the cloth and on the skin targets. In the case of the TT and the PM, the soot deposit patterns reminded of a blossom or shafts of rays or fans, or the bullet wipe had four narrow and four wide sections regarding the number of lands and grooves. The TT left a large amount of soot and many gunpowder particles and caused the melting of the synthetic fibres on the edges of the entrance hole, producing a defect of the material 0.1-0.3 cm in diameter and defects of textile fibres around the entrance hole. In the skin the TT caused many intraepithelial tears, folds of the epidermis and recesses of the epidermis containing soot. Firings from the PM and the Glock 19 caused the melting only of the ends of individual synthetic fibres on the edges of the entrance hole. The PM left a large amount of soot and only a few gunpowder particles. The Glock 19 gave the least soot and the greatest number of gunpowder particles and also caused tears and recesses in the epidermis. Only in the case of the Glock 19, hexagonal or polygonal zones were seen in the soot deposit pattern. The differences in the soot pattern were more distinct at the firing distance of 10 cm. By increasing the distance from 10 to 15 cm, the intensity of soot diminished and began to disappear at 25cm, but remained more visible in the case of the TT. The gunpowder particles could be found in the epidermis and deeper in both layers of the dermis at all distances fired from the TT and the Glock 19. In the case of firings from the PM, at the distance 10 cm some of the gunpowder particles had penetrated into the dermis and most of them were in the upper layer of the dermis. At the firing distance of 15 and 25 cm, the gunpowder particles were only on and in the stratum corneum.     

The influence of a possible contamination of the victim's clothing by gunpowder residue on the estimation of shooting distance

A study was conducted to assess the influence of a possible contamination of the victim's clothing by gunpowder residue on the estimation of shooting distance. The study was focused on the scenario in which the contamination might be caused by the surface on which the shot victim could fall. Contamination of two types of textile was examined after contact with two types of surfaces. One round was fired above those surfaces (the line of firing parallel to the surface) prior to the contact. It was found that few gunpowder residue particles could be transferred to the clothing. These findings should be taken into account when interpreting results for shooting distance estimation in cases when a minute quantity of gunpowder residue particles is found around the bullet entrance hole.     

毛发枪弹损伤的环境扫描电镜研究

目的探讨毛发枪弹损伤微观形态与射击距离之间的关系。方法应用环境扫描电镜/能谱仪对64式手枪在0~200cm范围内射击造成的毛发损伤及附着物进行形态和成分分析。结果0~30cm射击,毛发表面粘附有大量密集分布的球形射击残留物颗粒,鳞片有严重斑纹状损伤和崩裂缺损;30~60cm射击,毛发表面粘附有较多散在分布的球形射击残留物颗粒,鳞片有轻微斑纹状损伤和崩裂缺损;100cm距离射击,毛发表面粘附有少数个别射击残留物颗粒,鳞片无斑纹状损伤;200cm距离射击,毛发表面无射击残留物。毛发枪弹射击断裂形态差异较大,大体分为剪切断裂和牵拉断裂两种类型,与射击距离无明显相关性。结论毛发表面粘附的大量球形射击残留物颗粒及其造成的鳞片斑纹状损伤对于法医学鉴定贴近距离射击((30cm)具有重要的实用价值。     

Assessment of accumulation of the shot products on the targets in shooting from a short-barreled gun with a muffler for estimation of shooting distance

A practical expert task--to estimate shot distance and order of shots made in two victims from a gun with muffler--is described as illustration of opportunities of the complex investigation with experimental shots and emission spectral analysis of the targets. Distribution of the shot soot on the targets in shooting from the distance up to 1 m is analyzed.     

Macroscopic observation of the morphological characteristics of the ammunition gunpowder

At the present time, optical examinations are not used in routine to analyze the gunshot residues, except for the counting and the localization of particles. Indeed, the sequence of examinations often starts immediately with destructive techniques, contrary to the widely accepted law saying that we should progress from general to particular and from non-destructive to destructive and which is recommended for all the fields of forensic sciences. When a cartridge is shot, and before the projectile leaves the gun, all the powder grains should must be completely burnt; however, if this ideal case does not happen, it is possible to find unburnt and/or partially burnt gunpowder particles [H.H. Meng, R. Caddy, Gunshot residue analysis-a review, J. Forensic Sci. 42 (1997) 553-570]. The goal of this paper is to study the morphological characteristics of the powder before and after the shot, to establish if it is possible to determine which type of ammunition has been used on the basis of these characteristics. A set of 181 cartridges of different calibers was considered and various tests carried out to evaluate the technique. On the basis of the observation of the gunpowder particles found on the target, a list of potential cartridges can be established with the actually shot cartridge always found among them. It is important to underline that a maximum of eight cartridges were proposed for each experiment. Consequently, the method can be judged very discriminating. A database was then created, including information related to the morphological characteristics of the gunpowder before and after the shot as well as to the class characteristics of the analysed cartridges.     

The influence of a shot distance on a profile of a wound canal in flat bones

Experimental shots were made from rifled weapons, from different distances, at isolated flat bones. There was established a significantly increased angle of the axial section of the cone-shaped defect due to the expanding sizes of the exit part of the wound canal (WC) and of the outlet opening as the shot distances increased. An expert's evaluation is offered to assess a shot distance involving the WC profile and by calculating an angle of the axial section of the cone-shaped defect on the basis of the inlet and outlet sizes and of the flat-bone thickness.     

The boundary ranges of the free flight of particles of gunpowder and metals in shots from a hand firearm

On the basis of equations of external ballistics and probability theory the largest possible distances of free (independent) flight of gunshot powder and metal particles having different forms and sizes were calculated. Experimental control of the calculated data for different types of battle and sports hand fire-arms was carried out. The correspondence of the calculated data to maximal free (independent) particle flight in blank shots was stated. In experiments with cartridges equipped with bullets the distances of free particle flight were significantly lesser (by 53-65%) which may be connected with effect of gunshot projectile on the process of particle distribution. Reversed adapted formulas and calculation variants are presented.     

Forensic medical characteristics of Glock 19 pistol-shot wounds

An experimental study was made of gun-shot wounds inflicted by shots from a modern stub-barrelled pistol 9mm Glock 19. The study has ascertain characteristics differentiating injuries inflicted by shots from this pistol: specific recoil injury, specific topography, intensity and distribution of begrime, gunpowder and metal particles and relevant lesions. It was found that depth of penetration under the skin depends both on shooting distance and the position of the particle from the inlet.     

Image analysis of gunshot residue on entry wounds: II – A statistical estimation of firing range

A statistical investigation of the relationship between firing range and the amount and distribution of gunshot residue (GSR), used automated image analysis (IA) to quantify GSR deposit resulting from firings into pig skin, from distances ranging between contact and 45 cm. Overall, for a Ruger .22 semi-automatic rifle using CCI solid point, high velocity ammunition, the total area of GSR deposit on the skin sections decreased in a non-linear fashion with firing range. More specifically there were significant differences in the amount of GSR deposited from shots fired at contact compared with shots fired from distances between 2.5 and 45 cm; and between shots fired from a distance of 20 cm or less, with shots fired at a distance of 30 cm or more. In addition, GSR particles were heavily concentrated in the wound tract only for contact and close range shots at 2.5 cm, while the particle distribution was more uniform between the wound tract and the skin surfaces for shots fired from distances greater than 2.5 cm. Consequently, for future scientific investigations of gunshot fatalities, once standards have been established for the weapon and ammunition type in question, image analysis quantification of GSR deposited in and around the gunshot wound may be capable of providing a reliable, statistical basis for estimating firing range.     

Image analysis of gunshot residue on entry wounds. II--A statistical estimation of firing range.

A statistical investigation of the relationship between firing range and the amount and distribution of gunshot residue (GSR), used automated image analysis (IA) to quantify GSR deposit resulting from firings into pig skin, from distances ranging between contact and 45 cm. Overall, for a Ruger .22 semi-automatic rifle using CCI solid point, high velocity ammunition, the total area of GSR deposit on the skin sections decreased in a non-linear fashion with firing range. More specifically there were significant differences in the amount of GSR deposited from shots fired at contact compared with shots fired from distances between 2.5 and 45 cm; and between shots fired from a distance of 20 cm or less, with shots fired at a distance of 30 cm or more. In addition, GSR particles were heavily concentrated in the wound tract only for contact and close range shots at 2.5 cm, while the particle distribution was more uniform between the wound tract and the skin surfaces for shots fired from distances greater than 2.5 cm. Consequently, for future scientific investigations of gunshot fatalities, once standards have been established for the weapon and ammunition type in question, image analysis quantification of GSR deposited in and around the gunshot wound may be capable of providing a reliable, statistical basis for estimating firing range.     

Detection of antimony topography using diffuse-contact method on the skin targets of bio-manikins after shooting with Makarov gun from short distance

The authors examined sedimentation of stibium in the area of experimental skin entry holes generated by Makarov gun shots from different distances. Regularities of allocation of stibium subject to the distance of the shot were determined. Practical recommendations for expert conclusion about the distance of the shot were given on the grounds of the results of the study.     

Forensic-medical assessment of irritant distribution on the target in gas firearm shots

Distribution of irritant on the target after a shot from a 99 mm gas gun ME-38 COMPACT from different distances and gas gun MAUZER (a 9 mm HSc model) in use of different ammunition was studied. There is a correlation between irritant distribution characteristics, distance of shot and cartridge brand.     

Investigating the effect of changing ammunition on the composition of organic additives in gunshot residue (OGSR)

The measurement of the organic additives in smokeless gunpowder is an attractive approach for the detection of handgun use because it provides compositional information that can help associate residues and unfired gunpowder. We investigate several factors that will be required to advance the characterization of organic gunshot residue (OGSR) as a useful forensic tool, including evaluating residue contamination from previously fired ammunition, particle-to-particle compositional variability, and compositional features resulting from the type of firing primer used. Using ammunition loaded with known smokeless powders containing different stabilizers, a sequence of shots was fired from a .357 magnum revolver, and the muzzle exit residues were collected. Compositional analysis of the residues, both in bulk and as single particles, showed only a trace of the previously fired powder in the first shot and none in subsequent shots. In an additional experiment testing conventional leaded and the new lead-free firing primers, the OGSR composition was found not to depend on the primer type.     

An investigation into pellet dispersion ballistics.

Existing works on pellet dispersion ballistics are confined to some data-based models derived from statistical analysis of observed patterns on targets but the underlying process causing the dispersion lacks due attention. The present article delves into the relatively unexplored areas of dispersion phenomena, and attempts to develop a theoretical model for general application. The radial velocity distribution of pellets has been worked out by probing into the physical process of dispersion based on transfer of momentum from undispersed shot mass to dispersed pellets. The ratio 2u/v0 (u = root mean square (r.m.s.) radial velocity and v0 = muzzle velocity of the pellets) is found to be fairly constant for a fixed gun-ammunition combination and has been suitably designated as 'Dispersion Index' (DI) characterising its dispersion capability. The present model adequately accounts for pellet distribution on targets and it appears that 'Effective Shot Dispersion' (ESD) as introduced by Mattoo and Nabar [ESD = [(4/N0)sigma Ri2]1/2, where N(0) is the total number of pellets and Ri is the radial distance of the i-th pellet from centre of pattern], gives a faithful numerical measure of overall dispersion at a given distance. A relationship between ESD and firing distance, incorporating the effects of air resistance and gravity has been worked out, which reveals that DI controls the dispersion at a given distance. For small distances (less than 20 m) the relation reduces to a linear one, as already observed empirically and looks like ESD = E0+DI x firing distance, E0 being a parameter dependent on gun and ammunition. The present model, unlike earlier ones, is versatile enough to explain the natures of the dependence of dispersion on firing distance as well as on gun-ammunition parameters, which are essential for a faithful reconstruction of a crime scene. The model has been tested with such experimental data as are available and reasonable agreement is observed.     

Forensic medical characteristics of the injuries inflicted by home-made arbalest

The classification of arbalests as a representative of the class of missiles is presented. Basic design characteristics of such weapon, wounds and damage to cotton targets from shot distances 1, 3, 5, 10 and 15 m are described.     

The determination of the distance of a shot from a smooth-bore weapon based on the damages from the action of the wad containers

Experimental shots from a No. 16 calibre single-barrelled gun using commercial cartridges in the plastic cartridge cases supplied by wad containers with Nos. 1 and 2 shots revealed that lesions that had typical morphologic structure which were characteristic of wad container action were produced at close distances (less than 2 meters). Therefore preliminary experimental shots are necessary before making concrete decisions on characteristic features of an injuring projectile and shot distance.     

Expert evaluation of the gunshot distance based on the volume of wound canal in flat bones

Different-distance experimental shots were made from a rifled gun at flat bones. Those shot distances were established, at which the wound canal had the smallest volume, and, at which entry and exit holes were virtually identical and matched the bullet diameter. A bigger shot distance was associated with an increasing volume of the wound canal caused by a bigger exit hole. A smaller shot distance led, also, to an increasing volume of the wound canal caused by bigger entry and exit holes. The volume of the wound canal in flat bones can be used as a reliable criterion in assessing the shot distance.     

Distribution of GSR particles in the surroundings of shooting pistol

Several series of experiments were performed to study the distribution of GSR particles in seven directions in the surroundings of shooting firearm (pistol CZ 85 caliber 9 mm Luger). External and internal conditions and two different primer types were used for the shooting experiments. The results showed that maximum number of GSR particles could be found in the right front quadrant at a distance of 2–4 m with respect to the shooting firearm position and shooting direction. GSR particles were even found in distance 10 m from shooting firearm. A significant influence of climatic conditions on GSR distribution was confirmed.     

The systemic error in the vertical component of handgun bullet trajectory reconstructions

Establishing the path or trajectory of a fired bullet is an often recurring part of shooting incident reconstruction. The current study describes how gravitational pull causes a systemic error on the vertical component of a trajectory reconstruction. Bullet drop, drop angle, and vertical offset are explained and calculated for 10 different handgun/ammunition combinations over a range of distances up to 100 m. The presented results are intended to provide forensic firearm examiners with a reference frame for the magnitude of error introduced on handgun bullet trajectory reconstructions over distance. Threshold values of 20 and 30 m are proposed as conservative distances up to where bullet trajectories can be modeled as straight lines with subsonic/transonic handgun bullets and with supersonic handgun bullets respectively. Both the bullet drop and vertical offset will be below 5 cm at these distances for those categories. The drop angle will be below 0.3°.