A Small Population Study on Friction Skin Ridges: Differences in Ridge Widths Between Latent and Inked Fingerprints

Morphological changes in the width of latent fingermark ridges occur naturally over time. This could be used to examine the aging process of latents and eventually estimate time of deposition. In a crime context, it is common practice to compare a questioned (aged) fingermark with a database of known (inked) prints. Therefore, in the absence of fresh fingermarks for aging purposes, it is of interest to reveal correlations between these two categories of fingerprints with regard to the widths of their ridges. The present study explores correlations of ridge widths between flat and rolled inked prints with latent fingermarks visualized with carbon black (CB) and titanium dioxide (TiO₂)-based powders among a small population of ten donors. Results revealed consistent differences between the ridge widths of latent and inked prints as well as flat and rolled impressions. Latent fingermarks visualized with CB and TiO₂ powders showed ridges with comparable widths.     

Latent Fingermark Aging Patterns (Part IV): Ridge Width as One Indicator of Degradation

This fourth article of the series is taking an in‐depth analysis at the visible aging of latent fingermarks regarding changes in ridge widths over time. The objective is to quantify and statistically describe significant ridge size variations under controlled indoor conditions. The effect of three environmental variables are examined: type of secretion (sebaceous‐ and eccrine‐rich) and type of substrate (glass and polystyrene) when aged in three light conditions (direct natural light, shade, and dark). Prior to width measurements, fresh and aged fingermarks were powdered with titanium dioxide (TiO₂) and sequentially photographed at predetermined times over 6 months. Three independent observers measured the ridges from thirty predetermined locations using strategically placed intersecting lines on the print. Results indicate that fingermarks deposited on glass are more resilient to degradation compared with those deposited on plastic. The presence of direct natural light plays a negligible role on degradation compared to secretion and substrate types.     

Latent Fingermark Aging Patterns (Part III): Discontinuity Index as One Indicator of Degradation

This article is the third in a series of reports exploring quantifiable visual parameters of the aging process of latent fingermarks. On this occasion, research is focused on the occurrence of ridge discontinuities (i.e. breakages) as a function of time. Experiment variables included type of secretion (eccrine and sebaceous), substrate (glass and plastic), and exposure to natural light (dark, shade, and direct light) over a 6 months period. Fingermarks were sequentially visualized with titanium dioxide powder, photographed, and the number of naturally occurring ridge discontinuities subsequently evaluated. A semi‐quantitative value, named Discontinuity Index, was used to better characterize this aging parameter. Results indicated that ridges of sebaceous depositions on glass were generally less affected by the environmental conditions compared with those on plastic surface. In addition, aging in darkness was not always the best condition for preservation, and the direct exposure to light seemed not to affect the degradation under certain conditions.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

Morphometry of latent palmprints as a function of time

In many crimes, the elapsed time between production and collecting fingermark traces is crucial. and a method able to detect the aging of latent prints would represent an improvement in forensic procedures. Considering that as the latent print gets older, substantial changes in the relative proportion of individual components secreted by skin glands could affect the morphology of ridges, morphometry could be a potential tool to assess the aging of latent fingermarks. Then, considering the very limited research in the field, the present work aims to evaluate the morphometry of latent palmprint ridges, as a function of time, in order to identify an aging pattern. The latent marks were deposited by 20 donors on glass microscope slides considering pressure and contact angle, and then were maintained under controlled environmental conditions. The morphometric study was conducted on marks developed with magnetic powder in 7 different time intervals after deposition (0, 5, 10, 15, 20, 25 or 30 days); 60 ridges were evaluated for each developed mark. The results showed that: 1) the method for the replacement and mixing of skin secretions on the palm was appropriate to ensure reproducibility of latent prints, and 2) considering the studied group, there was a time-dependent reduction in the width of ridges and on the percentage of visible ridges over 30 days. Results suggest the possibility of using the morphometric method to determine an aging profile of latent palmprints on glass surface, aiming for forensic purposes.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Ridge Width Correlations between Inked Prints and Powdered Latent Fingerprints

A methodology to estimate the time of latent fingerprint deposition would be of great value to law enforcement and courts. It has been observed that ridge topography changes as latent prints age, including the widths of ridges that could be measured as a function of time. Crime suspects are commonly identified using fingerprint databases that contain reference inked tenprints (flat and rolled impressions). These can be of interest in aging studies as they provide baseline information relating to the original (nonaged) ridges’ widths. In practice, the age of latent fingerprints could be estimated following a comparison process between the evidentiary aged print and the corresponding reference inked print. The present article explores possible correlations between inked and fresh latent fingerprints deposited on different substrates and visualized with TiO₂. The results indicate that the ridge width of flat inked prints is most similar to fresh latent fingerprints_, and these should be used as the comparison standard for future aging studies.     

Development of Latent Fingermarks on Various Surfaces Using ZnO‐SiO2 Nanopowder

Fingermarks are one of the most useful forms of evidence in identification and can provide generalized proof of identity in crime investigation. They are developed using various conventional powders. The novel nanopowder ZnO‐SiO₂ was synthesized via the conventional heating method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), energy‐dispersive X‐ray (EDX) analysis, transmission electron microscope (TEM), and X‐ray diffraction (XRD). The mean particle size of ZnO‐SiO₂ nanopowder calculated through TEM was 32.9 nm. The development of fingermarks was carried out by powder dusting and small particle reagent (SPR) methods. Powder dusting method was used for the development of latent fingermarks on various dry, nonporous, and semi‐porous surfaces. The SPR method was also applied to wet nonporous surface. The developed latent fingermarks using ZnO‐SiO₂ nanopowder were found to have excellent quality with very clear third‐level ridges detail and had better visibility than commercially available white powder.     

The effect of household corrosive substances on latent fingermark development in the context of deliberate corrosive substance attacks

Corrosive substance attacks (CSA) are a prevalent issue in the UK with 525 offenses involving a corrosive substance reported to the police in the year ending March 2022. Easy availability, low cost, and concealability in public are common reasons for choosing a corrosive substance as a weapon. The Metropolitan Police revealed that 68% of 1849 CSA cases resulted in no suspect identified or evidential difficulties. There is limited research into the effect of corrosive substances on latent fingermarks. This study aimed to determine the potential for fingermarks to be recovered from surfaces exposed to a household corrosive substance within the context of a deliberate CSA. Natural and sebaceous-loaded fingermarks were exposed to Domestos bleach, Harpic limescale remover (hydrochloric acid-based) and lemon juice. Harpic limescale remover had the most detrimental effect, with only 7.1% of fingermarks (n = 378) exposed being identifiable (defined as sufficient clear ridge detail for identification) after enhancement, followed by bleach with only 10.3% of fingermarks (n = 378) identifiable. Lemon juice had the least detrimental effect on fingermarks, with 40.5% fingermarks (n = 378) identifiable compared to 53.4% for the controls (not exposed to any substance; n = 378). Throughout the study, fewer natural fingermarks were identifiable after exposure to corrosive substances compared to sebaceous fingermarks which was as expected. Overall, this study demonstrated that there is potential to recover latent fingermarks, depending on their composition, following exposure to a household corrosive substance. This area warrants further research to establish best practice to maximize the potential to recover identifiable fingermarks.     

Latent Fingermark Aging Patterns (Part II): Color Contrast Between Ridges and Furrows as One Indicator of Degradation

Currently, no established methodology exists to determine degradation patterns of latent fingermarks by visual means. This article is the second in a series of reports exploring quantifiable degradation‐related parameters, which focuses on color contrast changes between fingermark ridges and furrows over time. Experiment variables included type of secretion (eccrine and sebaceous), substrate (glass and plastic), and exposure to natural light (dark, shade, and direct light). Fingermarks were sequentially visualized with titanium dioxide powder and photographed. Image histogram profiles were evaluated and combined with statistical analysis of color data values. Results indicate that sebaceous depositions on glass were generally less degraded by the effect of environmental conditions compared with those on plastic. In addition, aging in darkness was not always the best condition for preservation, and direct exposure to light seemed to inhibit visual degradation under certain conditions. Overall, the technique provided sufficient sensitivity to discern degradation patterns of fingermarks.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

An Investigation into the Effects of Force Applied During Deposition on Latent Fingermarks and Inked Fingerprints Using a Variable Force Fingerprint Sampler

Physical factors, including the magnitude of the force applied during fingermark deposition, may affect friction ridge surface area and clarity, and the quantity of residue transferred. Consistency between fingermarks may be required; for example, in research projects, yet differences between marks are likely to exist when physical factors are not controlled. Inked fingerprints and latent fingermarks were deposited at 1–10 N at 1 N increments using a variable force fingerprint sampler to control the force, angle of friction ridge and surface contact, and the duration of friction ridge and surface contact. Statistically significant differences existed between the length and width measurements of the inked prints (p ≤ 0.05), particularly at lower forces. Scanning electron microscopy and surface plot analysis demonstrated how differences in force applied during deposition affected ridge surface area, displacement of latent residue, and differences in the quantity of residue transferred. Consistency between inked prints was demonstrated at equivalent forces.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Ninhydrin Thiohemiketals: Basic Research Towards Improved Fingermark Detection Techniques Employing Nano‐Technology*

Abstract: In the first part of a comprehensive research project towards more efficient application of nano‐technology to fingerprint visualization, we investigated the possibility of more selective binding of gold nanoparticles (NP) to fingerprint material. We synthesized derivatives of ninhydrin and 1,2‐indanedione containing loosely bound thiol groups. In particular: thiohemiketals (THK) of ninhydrin, and thioketals of 1,2‐indanedione were prepared and tested as potential fingerprint reagents. By reacting ninhydrin with various thiols we were able to produce a series of novel THK, bearing the SR group always at C2. Ninhydrin THK reacted with amino acids to produce the expected Ruhemann’s purple, and they also developed latent fingermarks on paper in a similar manner to ninhydrin. Ketals and thioketals derived from 1,2‐indanedione reacted neither with amino acids nor with latent fingermarks. In the second part of the research, the thiols which are formed on the ridges as byproducts of the reaction with amino acids will be tested for their potential as stabilizers for gold NP that will become covalently bound to the fingerprint ridges.     

Preparation of Artificial Blood from the Extract of Legume Root Nodules,and the Creation of Artificial Latent Fingermarks in Blood Using Artificial Blood,

Distribution of homogeneous fingermarks in blood is essential for conducting proficiency tests in forensic science. Hence, the artificial blood was prepared using the root nodule extract of Glycine max plants. The reactivity of the artificial blood with widely used human blood detection reagents was tested. Artificial latent fingermarks in blood were printed using an inkjet cartridge case filled with artificial blood solution. The artificial latent fingermarks in blood were developed with amino acid‐sensitive reagents and could obtain development as prominent as the image of the master fingermark saved on the computer. Therefore, it has been confirmed that the extract of legume root nodules can be used as artificial blood, and the artificial blood can be used for the preparation of artificial latent fingermarks or footmarks in blood.     

Methods for the enhancement of fingermarks in blood

Fingermarks formed in or by blood often require specific development techniques. This review examines techniques and materials that may be used to enhance and record fingermarks deposited in blood or fingermarks generated by blood-contaminated papillary ridges. A large number of techniques are presented here and are discussed from a chemical as well as practical perspective. It is concluded that an optimized sequence of techniques targeting both latent (non-bloody) and bloody fingermarks must be applied to detect and enhance the maximum number of marks, and therefore optimize the information content from exhibits that may bear marks in blood.     

Individuals lacking ridge detail: A case study in adermatoglyphia

Adermatoglyphia is a very rare autosomal‐dominant condition that is genetically inherited and causes an individual to be born without conventional ridge detail on either their palmar or plantar surfaces (the fingers and palms of the hands and the toes and the soles of the feet). While adermatoglyphia has been the focus of medical and genetic research, no previous research has been conducted with regard to the forensic recovery and identification of marks from an adermatoglyphic individual. By observation of ridge detail donated by an adermatoglyphic subject, the study uses different methods in order to capture fingermarks (methods include: inked capture, livescan (biometric) capture, cyanoacrylate fuming, ninhydrin enhancement, and physical developer). Unusually, the purpose of this paper ends up presenting a number of examples of an absence of evidence; unsuccessful attempts made to capture and enhance fingerprint ridge detail. This is determined over a range of standard means including "live" donations by the adermatoglyphic subject onto the Livescan system, and enhancements of latent donations. The subject shows to leave either insubstantial fingermarks with no detail, or no mark whatsoever.     

An efficient strategy to detect latent fingermarks on metallic surfaces

The aim of this work is to use metal sputtering for the development of latent fingermarks on metallic surfaces by taking advantage of the prints' topography. In order to promote the preferential deposition onto fingerprints' ridges the deposition parameters should be optimized. After a previous selection, copper and gold thin films were deposited by magnetron sputtering onto stainless steel substrates where fingermarks were intentionally placed. After optimizing the deposition parameters, the influence of the fingermarks' age was studied. The quality of the developed fingermarks was evaluated visually and through optical and scanning electron microscopy. The morphology of the copper and gold thin films was examined by high resolution scanning electron microscopy. The preferential magnetron sputtering deposition of copper and gold thin films, 20-30 nm thick, allows latent fingermarks to be successfully developed. The gold films are more promising, especially for detecting non-fresh fingermarks and for conserving the developed marks. It was possible to detect the contours of the ridges and localize minutiae features in a one-month aged impression developed by gold deposition. These films present discontinuous surface and columnar cross-sections, while copper thin films have a featureless morphology.     

Can latent fingerprint disclose the sex of the donor? A preliminary test study using GC–MS analysis of latent fingerprints

While fingerprints are a highly used means of identification, not every fingerprint left behind on a potential crime scene can be used for identification purposes. In some cases, the fingerprint may be smudged, partially preserved or overlapping with other prints hence distorting the ridge pattern and may therefore be not appropriate for identification. Further, fingermark residue yields a very low abundance of genetic material for DNA analysis. In such cases, the fingermark may be used to retrieve basic donor information such as sex. The focus of this paper was to assess the possibility of differentiating between the sexes of the donor of latent fingermarks. Analytical method was GC–MS analysis of the chemical compounds of latent fingermarks using 22 male and 22 female donors. Results showed 44 identified compounds. Two alcohols, octadecanol C₁₈ and eicosanol C₂₀, were found to show a difference that was statistically significant between male and female donors. There is also some evidence for the possibility of distinguishing sex of the fingermark donor based on the distribution of branched chain fatty acids, as free compounds or esterified in wax esters.     

Inherent Fluorescence Detection of Latent Fingermarks by Homemade Shortwave Ultraviolet Laser

Detection of latent fingermarks on various substrates is critical in crime investigations. Conventional chemical methods using reagents could contaminate or even destruct biological information of samples. Here, an optical method and successful case application of detecting latent fingermarks through long‐wave ultraviolet (UV) fluorescence (300–400 nm) by shortwave UV laser excitation is reported. Experimental results indicate that the recovery rate of the latent fingermarks on various paper items is in the range of 70–80% without chemical treatments. Moreover, the optical method allows for the preservation of samples for further examination, such as polymerase chain reaction (PCR) testing. The technique has also been successfully applied to a criminal case in identifying the suspect, which, to the best of our knowledge, has never been reported in real crime investigations. Therefore, such a method as UV‐excited UV fluorescence in detecting latent fingermarks may be better for examination in cases where biological information of samples is needed for consequent testing.