Validation of tool mark analysis of cut costal cartilage

This study was designed to establish the potential error rate associated with the generally accepted method of tool mark analysis of cut marks in costal cartilage. Three knives with different blade types were used to make experimental cut marks in costal cartilage of pigs. Each cut surface was cast, and each cast was examined by three analysts working independently. The presence of striations, regularity of striations, and presence of a primary and secondary striation pattern were recorded for each cast. The distance between each striation was measured. The results showed that striations were not consistently impressed on the cut surface by the blade's cutting edge. Also, blade type classification by the presence or absence of striations led to a 65% misclassification rate. Use of the classification tree and cross-validation methods and inclusion of the mean interstriation distance decreased the error rate to c. 50%.     

Tool mark striations in pig skin produced by stabs from a serrated blade

Stab wounds produced by serrated blades are generally indistinguishable from stab wounds produced by non-serrated blades, except when visible tool mark striations are left on severed cartilage. Using a pig-skin experimental model, we explored the possibility that similar striations may be left in skin. Stabs into pig skin were made using a straight spine coarsely serrated blade (121), a drop point finely serrated blade (20), a clip point irregular coarsely serrated blade (20), a drop point coarsely serrated blade (15), and as controls 2 non-serrated blades (40). Tool mark striations could be seen on the skin wall of the stab canal in all stabs made using serrated blades but in none with non-serrated blades.The striation pattern, reflecting the class characteristics of the serrated blade, was the same as that described in cartilage but less well defined. Fixation of the specimen with Carnoy's solution best preserved visible striations, and fixation with formaldehyde after staining with 5% Neutral Red was also satisfactory. Casting with vinyl polysiloxane dental impression material greatly facilitated photo-documentation. Applying the technique to homicidal stabbings may help identify stab wounds produced with serrated blades.     

Characteristics of Bone Injuries Resulting from Knife Wounds Incised with Different Forces

The aim of this research was to experimentally determine the characteristics of incised bone wounds, which are commonly found in defense injuries. A specially constructed pivoting arm device was used to inflict wounds with controlled forces and direction. Five knives were selected to inflict the wounds on porcine forelimbs. Eight incised wounds were made per knife per force. A larger knife and a greater force caused longer and wider bone wounds. Comparisons of individual knives at the two forces produced varying results in the bone wounds. A correlation was seen between the force and the length (r = 0.69), width (r = 0.63), and depth (r = 0.57) of bone wounds. Serrated‐edge and nonserrated knives can be distinguished from the appearance of the wound. The outcomes may be applicable in forensic investigations to ascertain the forces associated with incised wounds and identify the specific knife used.     

SEM and Stereomicroscopic Analysis of Cut Marks in Fresh and Burned Bone

This study documents the prevalence of cut mark characteristics in fresh and burned domestic pig ribs. Stab wounds from single edge serrated and smooth‐edged knives were inflicted in the vertebral and sternal regions of each fresh rib. Each rack of ribs was then divided into vertebral and sternal units. Vertebral units were defleshed and their associated cut marks were examined using a stereomicroscope. Sternal units were burned in an outdoor fire pit and examined with the addition of a scanning electron microscope (SEM). Linear cuts, V‐shaped cross‐sections, mounding, hinge fractures, and wastage were all observed on burned ribs. There was an overall decrease in the prevalence of all features (up to a 40% decrease), regardless of knife type, in burned ribs. Striations within cut marks were not observed in either fresh or burned ribs. Oblique faulting and bone lifts could only be observed using the SEM. Mounding and wastage were obliterated during the burning process. Therefore, cut marks in burned bone should ideally be examined for their characteristics utilizing an SEM.     

基于数据挖掘实现成人喉软骨和舌骨CT图像重组的年龄推断

目的 运用数据挖掘技术探索喉软骨和舌骨CT图像重组用于成人年龄推断的可行性.方法 收集413例颈部薄层CT图像,样本年龄范围18～<80岁,将样本随机分为测试集和训练集.参照TURK等的分级方法,对所有样本进行全方位综合阅片分级,将甲状软骨骨化过程分为6级,环状软骨骨化过程分为5级,舌骨大角和舌骨体的骨性结合分为3级....     

Interpreting the Effects of Burning on Pre-incineration Saw Marks in Bone

This study examined the effects of fire on the features associated with saw marks in bone. Both class and individual characteristics were examined using stereomicroscopy and scanning electron microscopy (SEM). Twenty-four semifleshed Sus scrofa L. tibiae were sawed into three sections with the middle section having deep and shallow false starts. Twelve saw blades of varying age and type were each used to cut two tibiae. In each case, the first tibia was burned in an outdoor open fire to the point of partial calcination. The second tibia, our control, was macerated using a heated enzyme solution. Controls and burned specimens were examined for the following characteristics: breakaway spur, tooth hop, false start, exit chipping, tooth imprint, breakaway notch, pull out striae, kerf flare, and blade drift. In general, there was parity in the observed characteristics in the burned samples using the SEM and the stereomicroscope. SEM observation, however, provided enhanced images, with the addition of observing individual tooth imprints, previously not visible. Therefore, this study recommends using an SEM for the examination of saw cuts in burnt bone.     

An experimental model of tool mark striations in soft tissues produced by serrated blades

Stab wounds produced by serrated blades are generally indistinguishable from stab wounds produced by non-serrated blades, except when visible tool mark striations are left on severed cartilage. We explored the possibility that similar striations may be produced on the soft tissues of internal organs. Loin of beef, bovine kidney, and pig heart, liver, and aorta were each stabbed 20 times with a coarsely serrated blade. The walls of the stab tracks were exposed and documented by photography, cast with dental impression material, and the casts photographed. Striations were identified in all of the tissues in every stabbing, but their consistency and quality varied between tissues. Striations were most easily seen in liver, heart, and aorta. Tool mark striations in soft tissues other than cartilage have not been described in homicidal stabbings, likely because they have not been sought. We suggest that the walls of stab wound tracks should be exposed, and tissue striations should be sought as a means of identifying the weapon as having a serrated blade.     

Testing the effectiveness of two cranial base foramina for metric sex assessment of fragmentary remains

Sex differences in linear and area dimensions of the foramen ovale and external opening of the carotid canal were analyzed in a documented French sample (35 men and 32 women). The results demonstrated that a low level of sexual dimorphism is present in the cranial base foramina of this sample, with only two-thirds of the examined variables exhibiting statistically significant differences (p < 0.05) between the sexes. The cross-validated sex classification accuracy rates obtained for univariate and multivariate discriminant functions ranged from only 54.7 to 72.1%. In addition, measurements of the cranial base foramina were found to be difficult to record with precision, with intra-observer error percentages ranging from 2.35 to 4.23%. Error rates of this magnitude may result in the misallocation of specimens. Therefore, osteometric analysis of the foramen ovale and carotid canal external opening cannot be recommended as a useful method for cranial sex assessment in this population group.     

正常鼻骨细微解剖结构的MSCT影像学形态及法医学鉴定

目的：通过对正常鼻骨多层螺旋CT （multi-slice spiral CT,MSCT）扫描及三维图像特征的观察,总结鼻骨细微解剖结构。方法对120例鼻骨无外伤史、无疾病史的志愿者行鼻区MSCT横断面扫描,重建层厚0.6 mm、层距0.5 mm的骨窗图像并导入Syngo Imaging XS软件中,进行三维图像重组。观察并分析鼻骨细微解剖结构的形态特征。结果正常鼻骨的细微解剖结构由四缝、两孔及一缘组成。其中四缝包括左、右鼻颌缝,鼻额缝以及鼻间缝,两孔为左、右鼻骨孔,一缘是鼻骨下缘。在某些个体,鼻间缝间会出现游离的缝间骨。鼻骨孔多为小孔状,但也有少数个体为线条状。鼻骨下缘可分为平直型、波浪型、倒尖峰型、月牙铲型以及其他类型。结论鼻骨解剖形态多样化且个体差异性较大,采用MSCT及三维图像重组技术,结合其外伤史有利于正确分辨鼻骨正常解剖结构和骨折。     

Tooth hop variability in human and nonhuman bone: Effect on the estimation of saw blade TPI

Forensic research has demonstrated that tooth hop (TH) is a valuable measurement from saw-cut bones as it can be used to estimate teeth-per-inch (TPI) of a saw used in postmortem dismemberment cases. However, error rates for TPI estimation are still under development and knowledge of how bone tissue affects TH measurements remains unclear. The purpose of this research was to investigate the effects of tissue variability through the use of different taxa on the accuracy and precision of TH measurements in the bone to estimate TPI of the blade. A total of 1766 TH measurements were analyzed from human, pig, and deer long bones cut by two 7 TPI saw blades of different tooth type. Fifty distance-between-teeth measurements before and after sawing were collected directly from each blade for comparison to bone-measured TH to assess potential effects of tooth wear on TH variability. ANOVA and F tests were used to compare mean TH and variance, respectively, by saw-species (i.e., crosscut-deer, rip-deer) and species groups (i.e., all deer, all pig), with significance determined at the p < 0.05 level. TH measurements were converted to usable TPI ranges, which would typically be presented in a forensic report. It is concluded that significant differences in TH (mm) do not necessarily reflect significant differences in associated TPI ranges of suspect blades. Forensic reports should report mean TPI ± 1.5–2.5 TPI while providing a sample size indicating number of TH measured rather than just number of cuts or cut surfaces examined.     

A radiographic assessment of pediatric fracture healing and time since injury

Past studies and pediatric bone physiology indicate that younger individuals may heal at a faster rate. Additionally, in adults upper limb fractures heal faster than lower limb fractures; this trend is expected for pediatric fractures. This study aims to evaluate and compare rates of fracture repair in children based on age and skeletal element. Six stages are used to describe the bone repair process in 294 radiographs of tibial and radial fractures from 107 infants and young children. Healing rates are examined using ANOVA and Welch's t-test with a 95% confidence interval. Results indicate that younger individuals spend less time at stage 1, suggesting a delay in the start of healing. Furthermore, forearm fractures heal faster than leg fractures at stages 2 and 3, suggesting a role in the osseous reaction of bone healing. The healing schedule presented may allow the timing of injuries to be estimated from radiographs.     

Utility of immunoassay in drug screening in skeletal tissues: sampling considerations in detection of ketamine exposure in femoral bone and bone marrow following acute administration using ELISA

Detection of ketamine exposure in skeletal tissues by automated enzyme-linked immunosorbent assay (ELISA) and gas chromatography with electron capture detection (GC-ECD) is described. Rats (n = 18) received 0, 15, 30, or 75 mg/kg ketamine hydrochloride acutely (i.p.), and were euthanized within 15 min or 1 h. Ketamine was extracted from ground femoral bone by methanolic incubation followed by liquid-liquid extraction (LLE), while marrow was homogenized in alkaline solution, and then underwent LLE. Extracts were analyzed by ELISA, and subsequently by GC-ECD following derivatization with trifluoroacetic acid anhydride. The effect of tissue type (i.e., diaphyseal bone vs. epiphyseal bone vs. bone marrow) on the immunoassay response was examined through determination of binary classification test sensitivity (S) and measurement of the relative decrease in absorbance (%DA, drug-positive tissues vs. drug-free controls) in each tissue type. The %DA varied significantly between different tissues examined under a given dose condition, and generally decreased in the order marrow > epiphyseal bone > diaphyseal bone, at all dose levels examined. Measured S values for marrow, epiphyseal bone, and diaphyseal bone were 100%, 77%, and 23%, respectively (75 mg/kg dose). These results suggest that the type of skeletal tissue sampled and position sampled within a given bone (diaphyses vs. epiphyses) are important parameters in drug screening of skeletal tissues.     

Dismemberment and Mutilation: A Data-Driven Exploration of Patterns,Motives, and Styles

Classification of violent behavior, including dismemberment and mutilation, has become increasingly more significant. This study uses a data-driven classification system based upon knowledge drawn from the pertinent literature, and examination of cases of offenders who have dismembered or mutilated their victims. The latter were extracted from the Serial Killer Database, as well as media sources, and assessed for characteristics of the perpetrators and victim(s). An informational form was developed and used to establish quantitative parameters and objectively extract pertinent information that could be used for comparison and pattern analysis. Motives and styles, as well as the organized/disorganized dichotomy for murder and dismemberment/mutilation, were examined for each case. The majority of cases demonstrated defensive styles (60%), with the second most common being offensive styles (26%), which differs from previous studies that do not exclude older cases. Additionally, 68% of cases reflected organized patterns for both murder and the acts of dismemberment or mutilation. The results support a data-driven classification system that may serve as a foundational model for the investigation of specific motives of this type of deviant behavior in future research.     

Thyroid Cartilage Ossification and Multislice Computed Tomography Examination: A Useful Tool for Age Assessment?

Abstract: Many authors have studied the thyroid cartilage ossification process using radiographic features for age estimation of individuals. Their results were various: Sugiyama reported excellent correlation coefficients between ossification rates and civil age, unlike most other authors. We hypothesized that recent advances in imaging techniques would enable more precise evaluation of the ossification of the thyroid cartilage. We retrospectively analyzed the CT scans of 312 French patients using postprocessing software to examine the pattern of thyroid cartilage ossification, calculating the ossified volume of the cartilage on 3D reconstructions. Pearson’s correlation coefficients for volume were 0.73 for men and 0.75 for women (standard error 18.02 and 17.06), indicating considerable inter‐individual variability. Although a correlation between civil age and morphological changes was found, these methods based on thyroid cartilage ossification were not accurate enough for the assessment of individual age.     

Improving Sex Estimation from Crania Using a Novel Three‐dimensional Quantitative Method,,

This study utilizes an innovative 3D approach to discover metric variables that obtain the highest classification rates for sex estimation from the cranium. Models were constructed from 222 cranial CT scans of U.S. Whites from the Bass Donated Collection. These models were used to create a statistical bone atlas that captures the primary shape variation in the skull and facilitates rapid computer‐automated analyses. The bone atlas showed that important size‐related sex variables are bizygomatic breadth, maximum cranial length, cranial base length, and mastoid height. Shape‐related variables capture sex differences in the projection of the glabellar region, inclination of the frontal, and cranial base flexion. In addition, vault thickness is highly dimorphic, with females having on average thicker vaults in the frontal region, and males having thicker vaults in the occipital region. Cross‐validated linear discriminant analysis obtained >95% accuracy (97.5% with 11 variables and 95.5% with eight variables).     

Classification of Porcine Cranial Fracture Patterns Using a Fracture Printing Interface,,

Distinguishing between accidental and abusive head trauma in children can be difficult, as there is a lack of baseline data for pediatric cranial fracture patterns. A porcine head model has recently been developed and utilized in a series of studies to investigate the effects of impact energy level, surface type, and constraint condition on cranial fracture patterns. In the current study, an automated pattern recognition method, or a fracture printing interface (FPI), was developed to classify cranial fracture patterns that were associated with different impact scenarios documented in previous experiments. The FPI accurately predicted the energy level when the impact surface type was rigid. Additionally, the FPI was exceedingly successful in determining fractures caused by skulls being dropped with a high‐level energy (97% accuracy). The FPI, currently developed on the porcine data, may in the future be transformed to the task of cranial fracture pattern classification for human infant skulls.     

The Effect of Soft Tissue on Temperature Estimation from Burnt Bone Using Fourier Transform Infrared Spectroscopy

This study investigated the effect of soft tissue and different exposure times on the prediction of burning temperatures of bone when using Fourier transform infrared spectroscopy (FTIR). Ovis aries rib bones were burnt at different temperatures and for varying time intervals. Results of a linear regression analysis indicated that burn temperatures can be predicted with a standard error of ±70°C from defleshed bone spectra. Exposure time does not have a significant impact on prediction accuracy. The presence of soft tissue has a significant impact on heat‐induced changes of the bone matrix in low (<300°C) as well as high temperatures (>800°C), slowing down combustion in the former and accelerating it in the latter (p < 0.05). At medium temperatures, no significant difference was noted. These results provide forensic investigators a new perspective with which to interpret the results of crystallinity measures derived from burnt bone.     

Characterization of lesions in hanging deaths

Hanging is a common method of committing suicide and a routine task in medico-legal autopsies. The hanging mark is the most relevant external sign and its characteristics are well known, but, for unknown reasons, there are major differences in reports on internal findings. We retrospectively studied 228 consecutive cases of hanging deaths. A complete standard autopsy was performed for every case. We investigated the association between the characteristics of the hanging mark and the frequency of bone, cartilage, soft tissue, and vascular injuries with the mode of suspension. Most cases (75.3%) presented some kind of bone or cartilage fracture, but these were unrelated to any of the variables studied. Vascular lesions are clearly more infrequent: intimal injuries were found in the carotid artery (9.1%), the jugular vein (2.2%), and ruptures of the carotid adventitial layer (21.7%). These could be partially associated with the use of a hard fixed noose and body weight.     

Sexual Dimorphism of the Humerus in Contemporary Cretans—A Population‐Specific Study and a Review of the Literature*

Abstract: Sex determination is the first essential step for positive identification when a decomposed body is recovered. Taking into consideration the population aspect of sexual dimorphism of the skeleton, the present study aimed to create a sex identification technique using osteometric standards, derived from a contemporary Cretan population. A total of 168 left humeri were measured according to standard osteometric techniques. The differences between the means in males and females were significant (p < 0.0005). About 92.3% of cases were correctly classified when all measurements were applied jointly. Stepwise procedure produced an accuracy rate of 92.9%. The most effective single dimension was vertical head diameter (89.9%). The current study provides standards for a population that has not been represented so far in the existing databases. It demonstrates that the humerus is an effective bone for the estimation of sex because even in a fragmentary state it can give high classification accuracy.