Comparison of three collection methods for the sodium rhodizonate detection of gunshot residues on hands

The aim of this study was to compare three gunshot residue (GSR) collection methods used in conjunction with chemographic detection applied by different regional Swiss police services. The specimens were collected from the hands of a shooter with either filter paper (Filter method) or adhesive foil. The adhesive foil was then either applied against photographic paper during visualisation (AF Photo method) or coated with a layer of polyvinyl alcohol (AF PVAL method). The experiments involved two conditions of the examined hands, i.e. dry and humidified. The residues were revealed using the sodium rhodizonate test (SRT). Preliminary tests assessing the possibility of conducting a confirmatory Scanning Electron Microscopy coupled to Energy Dispersive X-ray spectroscopy (SEM/EDX) analysis after the chemographic test were performed on a number of specimens by cutting positive spots and mounting them on stubs. Obtained results were compared in terms of effectiveness - number of positive spots, time requirements, quality of subsequent SEM-EDX analysis, ease of use and cost.The Filter method generally yielded a high-quality detection with both dry and humidified hands, as well as a simple, quick and efficient confirmation by SEM/EDX. The AF Photo performed well on dry hands, but not on humidified hands. The AF PVAL method performance was lower compared to the other methods in both examined conditions of the hands. The SEM/EDX analysis showed that the Filter and AF PVAL method provided satisfactory results when a sufficient carbon coating thickness was applied to the cuttings. It was also observed that the thinner the PVAL layer, the better the quality of the spectra and obtained images in SEM/EDX. Furthermore, the surface of the photographic paper did not seem to be conductive, even after the application of a thick layer of carbon.In conclusion, the Filter method gave the best overall results, but its application required slightly more time and expertise than the two other methods.     

Medicolegal aspects of witnessed suicide due to gunshot to the head. II. Legal medicine aspects and examination of the firing hand

The second part of the paper on suicides by gunshots to the head in the presence of witnesses focuses on relevant morphological autopsy findings such as entrance site, signs of close range or contact shots, bullet path etc. and also discusses selected aspects of ascertaining gunshot residues. For the identification of the shooter an integral medicolegal assessment of all the facts including the investigation results and the autopsy findings is essential. However, the morphological findings alone do not allow safe diagnosis, as for example in a homicide the temporal region, which was affected in all our cases, may have been deliberately chosen by the perpetrator as a localization typical of suicide. Thus methods to ascertain gunshot residues on the firing hand (by means of adhesive films and the polyvinyl-alcohol collection method--PVAL) are of great practical importance. In seven cases adhesive films and/or the polyvinyl-alcohol collection method were used. In one case the gunshot residues (GSR) were analysed by means of tape lifts and subsequent scanning electron microscopy (SEM). It was found that especially the combined application of topographical (adhesive tape/PVAL) and cumulative (SEM) methods allowed for the doubtless identification of the shooter, thus usually confirming the suicide. By the example of one case it is demonstrated that without the immediate collection of evidence at the scene objective reconstruction of the event becomes impossible. On the basis of the reported cases recommendations are finally given for a differentiated approach in the medicolegal evaluation of alleged witnessed suicide by gunshot (to the head).     

Stubs Versus Swabs? A Comparison of Gunshot Residue Collection Techniques

Abstract: The collection efficiency of two widely used gunshot residue (GSR) collection techniques—carbon‐coated adhesive stubs and alcohol swabs—has been compared by counting the number of characteristic GSR particles collected from the firing hand of a shooter after firing one round. Samples were analyzed with both scanning electron microscopy and energy dispersive X‐rays by an experienced GSR analyst, and the number of particles on each sample containing Pb, Ba, and Sb counted. The adhesive stubs showed a greater collection efficiency as all 24 samples gave positive results for GSR particles whereas the swabs gave only positive results for half of the 24 samples. Results showed a statistically significant collection efficiency for the stub collection method and likely reasons for this are considered.     

A new method for collection and identification of gunshot residues from the hands of shooters

This work presents a novel collection method for gunshot residues (GSR) using a sampling procedure based on ethylenediaminetetraacetic acid (EDTA) solution as a complexing agent on moistened swabs. Detection was via a sector-field inductively coupled plasma mass spectrometry (HRICP-MS). The proposed collection and analytical method allowed detection of antimony (Sb), barium (Ba) and lead (Pb) after .38 shot tests. at detection limits of less than 1 microg L(-1) in four different areas of the hands of volunteers. This paper includes a discussion concerning hand areas near the thumb and forefinger as being more suitable for GSR collection as well as a comparison between differences observed using 2% diluted EDTA. 2% nitric acid solution, and simple deionized water as collecting solutions, proving the superior efficiency of EDTA in GSR recoveries.     

Characterisation of gunshot residue from three ammunition types using suppressed anion exchange chromatography

Gunshot residue (GSR) is commonly analysed in forensic casework using either scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) or gas chromatography-mass spectrometry (GC-MS). Relatively little work has been reported on the post-discharge GSR content of non-metallic inorganic or low molecular weight organic anions to distinguish between different ammunition types. The development of an analytical method using suppressed micro-bore anion exchange chromatography (IC) is presented for the analysis of GSR. A hydroxide gradient was optimised for the separation of 19 forensically relevant organic and inorganic anions in <23min and sensitivities of the order of 0.12-3.52ng of anion detected for all species were achieved. Along with an optimised extraction procedure, this method was applied to the analysis of post-ignition residues from three selected ammunition types. By profiling and comparing the anionic content in each ammunition residue, the possibility to distinguish between each type using their anionic profiles and absolute weight is presented. The potential for interference is also discussed with respect to sample types which are typically problematic in the analysis of GSR using SEM-EDX and GC-MS. To the best of our knowledge this represents the first study on the analysis of inorganic anions in GSR using suppressed ion chromatography.     

Implementation and Optimization of the Sodium‐Rhodizonate Method for Chemographic Shooting Distance Estimation

In shooting incident investigations where it is important to estimate the shooting distance, the sodium‐rhodizonate coloring method has been used for the visualization of GSR patterns extensively. This publication describes the optimization of this method by the use of a heated press for the transfer of GSR traces on garments, as well as variation of a number of other important process parameters. Our final aim for this project was to prepare a formal validation of the coloring method as prerequisite for its inclusion into the scope of ISO17025‐certified methods in the GSR Laboratory. A number of important factors and process parameters were identified, such as buffer composition and pH, type of textile used as a substrate and resolution of the documentation of the results. Results were tested using a synthetic proficiency test. Our optimized method has been found to be a very effective technique for visualization of macroscopic GSR traces.     

Optimization of the collection and analysis of touch DNA traces

The aim of this work was to optimize a strategy for detection, collection, and analysis of touch DNA traces. 4N6FLOWSwabs™ and cotton swabs were compared by collecting touch DNA traces from glass slides and gun shell casings. Shed cells were visualized using Diamond™ nucleic acid dye and a digital fluorescent microscope. Different collection and extraction methods were tested. Collected samples were amplified with the AmpFlSTR® NGMSElect™ kit and the Precision ID mtDNA Whole Genome Panel.     

Analysis of Gunshot Residue and Associated Materials—A Review

Abstract: A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a “case by case” approach is argued to be more preferable to a “formal” classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, whereever practicable.     

A Study of Background Levels of Antimony,Barium, and Lead on Vehicle Surface Samples by Graphite Furnace Atomic Absorption

Law enforcement agencies routinely sample for gunshot residue (GSR) by bulk techniques and often submit swabs taken from other surfaces besides the hands of the suspect shooter. This study aims to establish the prevalence of antimony, barium, and lead on normally handled automobile surfaces by graphite furnace atomic absorption analysis. No positives were determined on 50 sampled automobile surfaces above cutoff (positive) from background levels. Transfers of GSR particles from shooter hands to automobile surfaces were found to potentially allow for positive GSR determinations, but such transfers seem to be dependent on the shooting conditions and length of GSR exposure. We determined that our bulk analysis method yields an overall 87.94 ± 5.52% extraction efficiency from cotton swabs, while the LOQ determinations strengthening the fact that bulk analysis methods are valid and valuable tools for GSR investigations.     

Gunshot residue in Chicago police vehicles and facilities: an empirical study

Suspects in shooting investigations in Chicago are routinely transported in department vehicles and detained in department facilities prior to gunshot residue (GSR) evidence collection. The GSR test results are used to associate the suspect with primary exposure to GSR. The potential for these vehicles and facilities being sources of secondary GSR contamination needed to be determined. A total of 201 samples were collected from randomly selected vehicles and detention facilities. The sampling collected trace materials from surfaces that suspects' hands may contact during the arrest process. These samples were examined for the presence of GSR particles using scanning electron microscopy. Upon completion of the automated analysis, those particles that met an initial GSR screening criterion were relocated and reanalyzed. The locations where GSR particles were recovered allowed us to make recommendations to the Chicago Police Department with regard to transporting and detaining these suspects. The low number of GSR particles recovered suggests that the potential for secondary contamination, although present, is relatively low.     

Firework displays as sources of particles similar to gunshot residue

In light of past research being targeted to find specific particles which may be similar to gunshot residue (GSR), this project was formulated to detect any possible particulate by random particle fallout onto substrates at firework displays and to assess the impact this may have on GSR evidence. Firework residue was collected at a display site, from amongst spectators as well as from the author's hair 90min after the display. SEM-EDX analysis has detected such particulate in all three scenarios, with the firework particle population at large providing a solid ground for discrimination from GSR. Wind dispersal was found to decrease the particle population and subsequently, the latter's discriminatory power. Some particles, if treated individually were found to be indistinguishable from GSR. Findings also include residues which may mimic strontium based GSR as well as GSR which may be mixed with that from previous firings. The continuous changes made to primer and propellant compositions by manufacturers also call for greater consideration when classifying particles as originating from pyrotechnic devices. Furthermore, authorities such as police forces should be made more aware about the incidence of such particle transfer in firework related periods.     

Computerized forensic assistance software (FAS 1.0) for training and standardized investigation in distributed and disconnected services

As part of a European union (EU) support program in forensic science for the Palestinian police, a forensic assistance software was designed to respect the quality management of the anti-terrorism laboratory of the Palestinian police by the different forensic teams in the disconnected Palestinian cities. This tool not only proposes up-to-date detection and identification protocols for traces, explosives, drugs, GSR, biological samples, but also appeared to be a convenient support for forensic practice teaching.     

Origin,Analytical Characterization,and Use of Human Odor in Forensics

Developing a strategy to characterize the odor prints of individuals should be relevant to support identification obtained using dogs in courts of justice. This article proposes an overview of the techniques used for the forensic profiling of human odor. After reviewing the origin of human odor—both genetic and physiological—the different analytical steps from sample collection to statistical data processing are presented. The first challenge is the collection of odor, whether by direct sampling with polymer patches, cotton gauze, etc., or indirect sampling with devices like Scent Transfer Unit. Then, analytical techniques are presented. Analyses are commonly performed with gas chromatography coupled with mass spectrometry. As they yield large amounts of data, advanced statistical tools are needed to provide efficient and reliable data processing, which is essential to give more probative value to information.     

A highly specific and sensitive sandwich enzyme immunoassay for human hemoglobin A

A highly specific and sensitive sandwich enzyme immunoassay for human hemoglobin A (Hb A) is described. A rabbit anti-human Hb A IgG-coated polystyrene ball was incubated with human Hb A and subsequently with affinity-purified anti-human Hb A Fab'-horseradish peroxidase conjugates, which had been prepared before and after absorption with Japanese monkey Hb-Sepharose 4B and dog Hb-Sepharose 4B. Bound peroxidase activity was measured by fluorimetry using 3-(4-hydroxyphenyl)propionic acid as a substrate. The detection limits of human Hb A using the conjugate before and after the absorption were 0.65 pg/tube (3 X 10(10)-fold dilution of whole blood) and 2.0 pg/tube (1 X 10(10)-fold dilution of whole blood), respectively. Human Hb A could be discriminated from Hb of animals such as Japanese monkey, dog, cat, pig, horse, sheep, chicken and cow by measuring bound peroxidase activity in the presence and absence of the conjugates prepared before and after the absorption. Human Hb A in bloodstains on cotton gauze could be discriminated from Hb of animals described above even after seven washings. Human Hb A in 220,000-fold diluted bloodstains on cotton gauze could also be discriminated from Hb of animals described above.     

ENFSI proficiency test program on identification of GSR by SEM/EDX

Within the framework of the ENFSI Expert Working Group "Firearms," a proficiency test on the detection and identification of GSR by SEM/EDX was organized and performed. The test material was designed by the Bundeskriminalamt and manufactured to order by an external company for SEM accessories. The participating laboratories were requested to determine the total number of PbSbBa-containing particles on the test samples following their own laboratory specific methods of automated GSR particle search and detection by SEM/EDX. Two similar samples with synthetic GSR particles were dispatched to all participants in order to gain additional information on systematic errors within the obtained results (split-level study), whereas one sample was supplied only with PbSbBa particles, and the second one was additionally contaminated with some environmental particles. This report summarizes the results of the study as well as a statistical evaluation and comparison with previous studies.     

Forensic veterinary radiology: ballistic-radiological 3D computertomographic reconstruction of an illegal lynx shooting in Switzerland

The most popular handgun in Brazil is the single round-barrel caliber 0.38 revolver. In recent years, however, owing to the modernization of police arms and their availability on the legal and illicit markets, pistols have become increasingly popular and currently represent about 20% of police seizures. In a previous paper we presented a novel collection method for gunshot residues (GSR) using a sampling procedure based on ethylenediamine-tetraacetic acid (EDTA) solution as a complexing agent on moistened swabs with subsequent detection using sector field-high resolution-inductively coupled plasma-mass spectrometry (SF-HR-ICP-MS). In the present paper, we discuss the capability of this methodology to identify antimony (Sb), barium (Ba) and lead (Pb) on the hands of volunteers after shot tests with 9 mm and 0.40 in. caliber pistols. Two types of munitions were tested: 9 mm Taurus and clean range. The use of a technique with high sensitivity, such as SF-HR-ICP-MS, permits the identification of low concentrations (less than 1 microg/L) of metals in firearm residue and constitutes a powerful tool in forensic science. We also discuss the importance of the sampling procedure, including collection from a different body part than the gun hand of the suspect. Comparison of the analytical data obtained allows clear discrimination between samples from the hands of shooters and non-shooters.     

A Mixture Model for the Number of Gunshot Residues Found on Suspects' Hands

Quantifying the strength of gunshot residue (GSR) evidence requires scientific knowledge about the number of particles expected to be found on individuals who were or were not involved in a shooting. However, controlled experiments demand expensive resources in terms of microscope time and labor, which restricts the data of most studies to only a small group of individuals. We suggest a novel method that exploits data collected routinely on suspects during the daily work of forensic laboratories. These observational data relate to both persons who were involved in a shooting and innocent individuals. We suggest a mixture approach with different models for the number of gunshot residue particles in each group and develop an iterative algorithm to estimate the probabilities of observing the evidence under the defense proposition that the suspect is innocent and under the prosecution assumption that he is not. The method is applied to data of more than 500 suspects collected by the Israel National Police Division of Identification and Forensic Science. The analysis shows that the probability of finding three or more GSR particles on the hands of innocent suspects is very small, less than 1.5 in 1000 cases. Our new method enables researchers to use data on real cases, possibly supplemented by experimental data, in order to estimate the probabilities of a given GSR finding under the defense and prosecution propositions.     

Combined Collection and Analysis of Inorganic and Organic Gunshot Residues

Gunshot residue (GSR) analysis and their interpretation provide crucial information on a criminal investigation involving the use of firearms. To date, several approaches have been proposed for the implementation of a combined sampling and analysis of inorganic (IGSR) and organic GSR (OGSR). However, it is not clear at this stage if concurrent analyses of both types of residue might be detrimental to the analysis of IGSR currently applied in forensic laboratories. Thus, this work aims to compare and evaluate three different protocols for the combined collection and analysis of IGSR and OGSR. These methods, respectively, involve the use of a modified stub (with two halves, one for the detection of IGSR and the other for the analysis of OGSR); the sequential recovery of GSR with two stubs mounted with different adhesives (double-sided carbon tape and Tesa® TACK) and the sequential analysis of IGSR and OGSR from a single carbon stub following carbon deposition. The detection of IGSR was carried out using SEM-EDX, while OGSR analysis was performed using ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS). Obtained results for experiments performed using Geco Sinoxid^® ammunition indicated that sequential analysis was the most suitable protocol for the combined collection and analysis of both IGSR and OGSR. A higher number of inorganic (characteristic and consistent) particles and higher concentrations of ethylcentralite, N-nitrosodiphenylamine, diphenylamine, and nitroglycerin were recovered with this method.     

Advantage of ForensiX Swabs in Retrieving and Preserving Biological Fluids

This study compares two novel swabs (forensiX) with a standard cotton swab (EUROTUBE) for the collection of saliva stains on glass slide for STR analysis. ForensiX collection tubes are a standard cotton swab in an “active drying” tube, where swab sample is soon dried by its innovative tube surface of the wall. The other is forensiX Nylon Flocked Swab. The study is two phases: The first “phase” assesses swab types regarding to retrieve ability of saliva. The second “phase” compares the drying ability of each swab to assess how crime samples would fare when left in storage. The main result showed that “active drying” is effective to store swabbed sample. The forensiX swabs generally are effective for higher (twofold to fourfold) DNA yield compared to delta lab swab (around 750 pg and 250 pg from 0.5 μL of saliva), respectively. These findings demonstrate the importance of drying performance in the preservation of DNA and swab selection.     

Vacuum collection of gunpowder residues from clothing worn by shooting suspects, and their analysis by GC/TEA, IMS, and GC/MS

Experiments were conducted to collect gunpowder (propellant) residues from shooters' clothing by vacuum and to analyze them by gas chromatography/thermal energy analyzer (GC/TEA), ion mobility spectrometry (IMS), and gas chromatography/mass spectrometry (GC/MS). The residues were collected on fiberglass and Teflon filters using the portable vacuum sampler, all supplied with the IMS instrument. Several solvents were examined for the extraction of the propellant components from the filters. The extracts were centrifuged and/or filtered, concentrated by evaporation, and analyzed without any additional clean-up procedure. Based on the results of the study, an operational method for analysis of gunpowder residues was introduced into casework without changing the present operational technique for gunshot (primer) residue (GSR) analysis on clothing implemented by the Israel Police. In the modified method, the clothing is first sampled by double-side adhesive-coated aluminum stubs (the tape-lift method) for GSR analysis (the existing method), followed by vacuum collection for propellant residue examination. The issue of interpretation of the analytical results is discussed.