中国汉族成人胸骨多项测量值与身高关系的研究

目的 研究中国汉族成人胸骨多项测量值与身高的关系,建立以胸骨推算身高的方法。方法 测量135例(男100,女35)已知身高的中国汉族成年人干燥胸骨的全长、柄长、体长、柄最大宽、柄最小宽、体最大宽、体最大厚、柄厚、柄最大厚9项指标,采用多元逐步回归分析的方法,分别求出由男性(分年龄组)和女性胸骨的多项测量值推算身高的多元回归方程式。结果 所建立的4个男性(分年龄组)和1个女性胸骨推算身高的多元回归方程式,其复相关系数(R)在0.6237～0.7350之间,标准差(s)在4.5720—7.0348之间。结论 根据人体胸骨的多项测量值可以推算其身高,准确性略低于四肢长骨的同类推算;相同身高组的男女性胸骨多项测量值均存在明显的性别差异,胸骨柄长不能作为单因素推算身高的测量指标。     

Estimating sex of the human skeleton based on metrics of the sternum

Estimating the sex of skeletal remains is critical in creating the biological profile of an adult individual. Previous research has shown that analyzing the sternum may lead to an accurate estimation of sex based on studies performed on various populations around the globe, such as Indian, European, African, Canadian and North American. The motivation of the current study is to develop classification functions and sectioning points for use in forensic investigations in the United States. The majority of previously published methods are population specific, meaning the data would not prove useful in the United States. For this study, sternal measurements were collected from the William M. Bass Donated Skeletal Collection located at The University of Tennessee, Knoxville following the metric definitions provided by Schwartz and Bass. This collection consists of recent skeletal remains with known age at death, ancestry and sex. Material for the present study consisted of 410 human sterna: 285 male (256 American White/29 American Black) and 125 female (120 American White/5 American Black). Previous studies analyze the applicability of Hyrtl's law in the estimation of sex. This law follows that the mesosternum is greater than twice the length of the manubrium in males and in females the length of the manubrium is greater than half the length of the mesosternum. In this study, comparisons of the proportion of the length of the manubrium to the length of the mesosternum were performed to determine if Hrytl's law is applicable in an American population. Comparisons of these measurements between individuals identified as American Black and American White were analyzed to determine whether this method could be used on both population groups. Further, discriminant function analysis was used to estimate sex and provide a population specific classification function for use in the United States. The discriminate function analysis produced an overall cross-validation classification rate of 84.12% for sex estimation. The cross-validation classification rate for males and females was 80.00% and 88.24%, respectively.     

Estimation of sex from hand and handprint dimensions in a Western Australian population

A number of recent studies have demonstrated that sex can be estimated with a high degree of expected accuracy through the analysis of anthropometric measurements of the hand. Presently, however, the majority of previous related research has been focused on a limited range of global populations. The aim of the present study, therefore, is to evaluate the accuracy of using anthropometric hand measurements for the estimation of sex in a contemporary adult Western Australian population; we also assess if sex can be accurately estimated from the measurement of handprints. The study sample comprises a total of 91 male and 110 female individuals; documented mean age for the males is 38 years (range 19-68) and for the female sample it is 36 years (range 18-63). A total of six linear measurements are taken from each hand and its corresponding print. Measurement data is analysed using basic univariate statistics and a series of direct and stepwise discriminant function analyses are performed to assess the sex classification potential of the hand and handprint variables. All six hand and handprint measurements are sexually dimorphic and sex explains 28.4-61.7% of the sample variance. The breadth and length of the hand contribute most significantly to sex discrimination; cross-validated sex classification accuracies range between 82.6 and 96.5% with a sex bias of ≤5%. We conclude that anthropometric measurements of the hand and handprint can be used to classify sex with a high degree of expected accuracy in a Western Australian population.     

A test of sex determination from measurements of chest radiographs

Sexually dimorphic distinctions within the human thoracic area may include morphological as well as metric differences in the sternum and 4th rib. This research assesses the validity of a set of previously published measurements from chest radiographs and their use in contemporary forensic situations. The chest plates from 130 adult individuals of a known sample undergoing medico-legal post-mortem examination were examined at autopsy. Thoracic radiographs were taken using a Faxitron cabinet X-ray machine at 40 kV using Kodak Diagnostic Film Ready Pack X-Omat TL. Measurements were taken to the nearest millimetre using a sliding calliper. Logistic regression analysis of measurements of the sternum and 4th rib was undertaken to determine sex. Using 4th rib width and sternal area, sex was predicted at an accuracy of 95.8% for males and 90.3% for females.     

Estimation of stature from hand and handprint dimensions in a Western Australian population

As part of the formulation of a biological profile, the estimation of stature is an important element that provides useful data towards narrowing the pool of potentially matching identities. Recent literature has demonstrated that anthropometry of the hand has considerable promise for the accurate estimation of stature; although the technique has only been tested in a relatively limited range of populations. The aim of the present study, therefore, is to assess the reliability and accuracy of using anthropometric hand measurements for the estimation of stature in a contemporary Western Australian population; we also evaluate whether stature can be accurately estimated from the measurement of handprints. The study sample comprises 91 male and 110 female adult individuals. Following the measurement of stature, seven measurements are taken on each hand and its corresponding print. To establish the reliability of acquiring these measurements, a precision study was performed prior to primary data collection. Measurements data are analysed using basic univariate statistics and simple and multiple regression analyses. Our results show that the degree of measurement error and reliability are well within accepted standards. Stature prediction accuracy using hand and handprint measurements ranges from ±4.74 to 6.53cm, which is comparable to established skeletal standards for the hand. This study provides new forensic standards for the estimation of stature in a Western Australian population and also demonstrates that the measurement and analysis of handprints affords a novel source of profiling data that is statistically quantified.     

Bidimensional Data Allow for Better Age Estimation on Immature Specimens than Unidimensional Data: A Preliminary Study on the Ilium

Most biometric age estimation methods used in anthropological and forensic science for juveniles are based on unidimensional measurements (length or width). Here, a new method using bidimensional data was tested. A 3D morphometric analysis was performed on 108 CT scans of ilium bone of juveniles (from 20 gestational weeks to 12 years old). The sample was divided into training and validation groups. Best predictors were determined by comparing the efficiency of each variable (length, width, area, and module: a product of length and width). We established linear and polynomial regressions for each parameter for both sides. Applying the equations to the validation sample showed no significant difference between real and predicted ages. For age estimation, the area and module parameters yielded better results than unidimensional measurements. The results from this preliminary study were highly conclusive, and it would be interesting to extend the work, covering larger samples, and other bones.     

Virtual determination of sex: metric and nonmetric traits of the adult pelvis from 3D computed tomography models

Examination of the adult os coxae and sacrum is one of the most common methods of sex estimation from bone. Medical imaging, such as computed tomography (CT), provides the opportunity for three-dimensional (3D) imaging of the skeleton from clinical scans of known individuals in situ. In this study, a randomly selected subset of abdominopelvic CT-derived models were used to evaluate simple, repeatable metric methods of sex estimation based on a combination of obstetric measurements and the traditionally nonmetric Phenice-derived traits. A four-variable discriminant function for sex estimation was developed based on statistical analyses. Overall, the cross-validated accuracy of this method was 100%, with inter-observer error showing an average of only 2.2%. Comparative analysis was run on the data set using FORDISC 3.0. This study shows that current sex determination standards from the pelvis should be updated to include more in vivo data to increase the accuracy of identification.     

Osteometric analysis of sexual dimorphism in the sternal end of the rib in a west African population.

This study, and others, are being carried out in order to establish a Forensic Anthropology databank on age estimation and sex determination of skeletonized remains in Ghana. An osteometric study of sexual dimorphism in the sternal end of the right fourth rib on 346 consecutive coroner's autopsy cases (221 males, 125 females) of known age, sex, and race was conducted. The height and width of the sternal end of the rib were measured in each case. The sample was analyzed in three groups: young (< 30 years), old (> or = 30 years), and total sample (total group). Stepwise discriminant function analysis showed that the accuracy of sex determination varied from 80% in the young and 74% in the old groups to 78% for the total group. Statistical analysis of the results obtained when the functions derived from the study were tested using another batch of ribs showed the functions to be effective and reliable in determining sex. When functions derived from a previous study of American Whites were used to determine sex in our study sample, the vast majority of males were misclassified as females. This is the first time, to our knowledge, that a Black African population has been studied osteometrically to evaluate sexual dimorphism in the sternal end of the fourth rib.     

Testing the validity of population-specific sex estimation equations: An evaluation based on talus and patella measurements

Sex estimation is essential for forensic scientists to identify human skeletal remains. However, the most sexually dimorphic elements like pelvis or skull are not always assessable. Osteometric analyses have proven useful in sex estimation, but also to be population specific. The main purpose of this study was to test the validity of contemporary Greek and Spanish discriminant functions for the talus and the patella, respectively, on a Swiss skeletal sample and to quantify the utility of the measurements as a novel approach in osteometric sex assessment.Four talus and three patella measurements on dry bone were obtained from 234 individuals of the modern cemetery SIMON Identified Skeletal Collection. The previously derived discriminant functions were applied, accuracies determined, the utility of the different measurements was assessed and new multivariable equations constructed.Accuracies varied between 67% and 86% for talus and 63% and 84% for patella, similar to those reported by the original studies. Multivariable equations should be preferred over equations based on single measurements and combining the most significant measurements rather than using several variables obtained the best possible accuracy. The new discriminant functions did not provide a substantial improvement to the original ones. The overall utility of talus and patella is limited, allowing sex estimation with sufficient certainty only in a small proportion of individuals.Discriminant functions developed in contemporary Greek or Spanish populations are in principle applicable also to Swiss contemporary populations. We recommend that at present existent studies of this type should be validated and tested rather than developing new formulas.     

应用CT三维重组技术判定胸骨性别的研究

目的建立利用三维重组形态学指标判定胸骨性别来源的方法,并对其判定效果进行评价,考察虚拟骨骼的法医学应用价值。方法应用胸部螺旋CT扫描图像,通过多层面重组法获取胸骨的二维影像,结合容积再现技术得出的三维模型,分别测量胸骨的全长、柄长、体长、柄最大宽、体最大宽、柄最大厚、体最大厚、体上端厚等8项指标,并计算出3个比值指标;筛选出其中有性别差异的指标,建立性别判别方程并评价其判别效果。结果 11个指标的性别差异均具有统计学意义(P0.05),但以胸骨全长、胸骨体长、体最大厚及柄最大宽的判别效果较好。所建方程组中,全指标、长度指标判别方程及逐步判别方程的判别率较高,88.6%的判定率与近期国外有关性别判定研究的报道结果基本一致。结论应用多层螺旋CT三维重组技术判定国人胸骨性别具有较高的可行性和准确性,该技术有望应用于胸骨年龄推断及其它虚拟骨骼的研究。     

Sexual Dimorphism of the Humerus in Contemporary Cretans—A Population‐Specific Study and a Review of the Literature*

Abstract: Sex determination is the first essential step for positive identification when a decomposed body is recovered. Taking into consideration the population aspect of sexual dimorphism of the skeleton, the present study aimed to create a sex identification technique using osteometric standards, derived from a contemporary Cretan population. A total of 168 left humeri were measured according to standard osteometric techniques. The differences between the means in males and females were significant (p < 0.0005). About 92.3% of cases were correctly classified when all measurements were applied jointly. Stepwise procedure produced an accuracy rate of 92.9%. The most effective single dimension was vertical head diameter (89.9%). The current study provides standards for a population that has not been represented so far in the existing databases. It demonstrates that the humerus is an effective bone for the estimation of sex because even in a fragmentary state it can give high classification accuracy.     

Sex determination from hand and foot bone lengths

Numerous studies have addressed sex estimation from the hands and feet with varying results. These studies have utilized multiple measurements to determine sex from the hands and feet, including measures of robusticity (e.g., base width and midshaft diameter). However, robusticity measurements are affected by activity, which can disguise underlying patterns of sexual dimorphism. The purpose of this study is to investigate the utility of length measurements of the hands and feet to estimate sex. The sample consists of white females (n=123) and males (n=136) from the Terry Collection. Discriminant function analysis was used to classify individuals by sex. The left hand outperformed both the right hand and foot producing correct classification rates exceeding 80%. Surprisingly, the phalanges were better sex discriminators than either the metacarpals or metatarsals. This study suggests that length measures are more appropriate than robusticity measures for sex estimation.     

Determination of sex from the clavicle and scapula in a Guatemalan contemporary rural indigenous population

The clavicle has been described as a useful bone for the metric determination of sex of human skeletal remains in a contemporary, predominantly white, North American forensic sample. In this article, measurements of clavicle and scapula are provided for a contemporary Guatemalan rural indigenous sample of forensic origin. Maximum length and circumference at midshaft of the clavicle, and height and width of the glenoid fossa of the scapula, were measured in 35 female and 62 male clavicles, and in 38 female and 65 male scapulae. Discriminant function analysis was used to study sexual dimorphism in this population with a classification purpose. Leave-one-out method (jackknife) matrices produced classification success rates ranging from 85.6% to 94.8%. A comparison with the North American forensic sample showed low percentages of correctly sexed Guatemalan male clavicles, ranging from 29.4% to 54.9%. The choice of an appropriate standard for the metric determination of sex is a crucial step in forensic anthropology.     

Identification of sex depending on radiological examination of foot and patella

Forensic anthropology involves the building of an antemortem profile of an individual from skeletal remains. This includes sex, race determination, and age and stature estimation. Because most bones that are conventionally used for sex determination are often recovered either in a fragmented or incomplete state, it has become necessary to use denser bones that are often recovered intact, eg, the patella, calcaneus, and talus. The present work was performed to investigate the possibility of estimation of sex from some radiologic measurements among a known cross-section of Egyptian population. In this study lateral and anteroposterior radiographs of the right foot and knee were made on 160 living unfractured and nonpathologic individuals comprising 80 males and 80 females aged 25 to 65 years referred to the Radiology Department of Assiut University Hospital. Two measurements on right patella (maximum height and maximum width) and 2 measurements of metatarsal bones (length and midshaft diameter), were used to determine sex by univariate and multivariate discriminant analysis. Eighty radiographs of foot and patella of individuals not used in the original sample were randomly selected to test the accuracy of this method. The study revealed that significant sex differences were demonstrated based on these measurements taken on metatarsal bones more than on patella. One function associating 2 parameters (length and midshaft) of the third metatarsal bone obtained the highest value of correct sex determination with rate of 100% accuracy. The multivariate function associating length of the first, third, and fifth metatarsal bones and midshaft of first, second, and fifth metatarsal gave 100% accuracy. Test of multivariate function on the independent sample revealed a correct classification of 87.5%.     

Metric Assessment of the Pubic Bone Using Known and Novel Data Points for Sex Estimation,

Biological sex estimation of skeletal remains is essential in forensic and archaeological analyses. Anthropologists most often use the pelvis, which is the most sexually dimorphic element both morphologically and metrically. While nonmetric pubic bone features have been studied extensively, few metric studies have examined this individual bone for dimorphism. For this study, three observers examined three previously identified and ten novel measurements of the pubic body on a modern sample of isolated pubic bones from the Maricopa County Forensic Science Center (FSC), in Phoenix, Arizona (n = 400). A relationship between pubic body measurements and biological sex was demonstrated, with significant correlations. Discriminant function analyses found that five measurements, four of which were novel, discriminated between males (89%) and females (86%). Observer experience level did not significantly impact the results. These five measurements were reliable and show promise for inclusion in metric methods for assessment of sex.     

Osteometric analysis of sexual dimorphism in the sternal end of the rib

Although there have been a number of radiological studies of the entire anterior thorax, no attempt has been made to establish a method of sex determination based on direct metrical analysis of an isolated rib. The present study attempts to determine sex from the sternal end of the fourth rib. The sample (144 males, 86 females) was obtained from individuals of known age, sex, and race autopsied at a medical examiner's office. Three measurements (height, width, and sternal articular pit depth) were taken from each bone. The sample was divided into three groups: young, old, and the combined total and analyzed by means of stepwise discriminant function statistics. It was found that the accuracy of sex determination varied from 82% in the young and 89% in the old groups to 83% for the combined group. However, when a discriminant function formula developed for a different age group was used the accuracy of correct assessment diminished considerably. It was, therefore, concluded that sexual dimorphism can be detected by metrical analysis from the teens to the 70s and this dimorphism increases with age.     

Determination of sex from femora

The determination of sex from bones or bone fragments considerably contributes to identifying unknown bodies or skeletal remains. Due to temporal change and regional differences anthropometric standards have to be constantly renewed. The present study provides measurements of femoral dimensions in a contemporary German population and analyses sexual dimorphism by discriminant analysis. Maximum length (male: 46.4+/-2.4 cm, female: 43.4+/-2.4 cm), maximum midshaft diameter (male: 3.1+/-0.2 cm, female: 2.8+/-0.2 cm), condylar width (male: 8.4+/-1.0 cm, female: 7.7+/-0.5 cm), vertical head diameter (male: 4.9+/-0.3 cm, female: 4.4+/-0.3 cm), head circumference (male: 15.7+/-0.8 cm, female: 13.8+/-1.0 cm) and transverse head diameter (male: 4.9+/-0.3 cm, female: 4.3+/-0.3 cm) were measured in 170 femora, 100 from male (age: 16-92 years, mean: 60.8 years; body height: 153-190 cm, mean: 171 cm) and 70 from female (age: 20-96 years, mean: 72 years; body height: 146-175 cm, mean: 161 cm) individuals. In the discriminant analysis (leave-one-out-method) 67.7% of cases could be grouped correctly with the maximum length alone, 72.4% with the maximum midshaft diameter, 81.4% with the condylar width, 86.8% with the vertical head diameter, 87.7% with the head circumference and 89.6% with the transverse head diameter. The stepwise procedure with all head measurements showed that the results for the transverse head diameter could not be improved. With all measurements subjected to stepwise procedure 91.7% of cases could be classified correctly combining midshaft diameter and head circumference (D=3.012xmidshaft diameter in cm+0.780xhead circumference in cm 20.569).     

An Analysis of Hounsfield Unit Values and Volumetrics from Computerized Tomography of the Proximal Femur for Sex and Age Estimation

Sex and age are two elements in the establishment of a biological profile for forensic identification. While the pelvic bones are the most ideal structures for sex estimation, the condition of a body is not always ideal due to the nature of death, such as in mass disasters, or postmortem processes. This study utilized CT scans and resultant 3D models of 100 male and 100 female adults of known ages ranging from 18 to 98 years old to collect volumetric and Hounsfield unit measurements of the proximal femur. Equations were created to establish logistic regression models for sex estimation and linear regression models for age estimation. The resultant sex estimation method had an accuracy of 93.5% and utilized the volume of the proximal femur. This study provides three linear regression models for age with an accuracy range of 86%–92% ±12 years. As imaging technologies are increasingly adopted for forensic purposes, the power of 3D data will provide the opportunity for more quantitative and reproducible analyses. The proposed method for sex and age estimation provides a reliable tool that can be utilized in both day-to-day casework and disaster victim identification.     

Sexual Dimorphism in Ulna: An Osteometric Study from India

Determination of sex constitutes the most important element during the identification process of human skeletal remains. Several sex‐specific features of human skeleton have been exploited for sex determination with varying reliability. This study aims to obtain sexual dimorphic standards for ulnae of the north Indian population. Eight measurements were obtained on a sample of 106 ulnae (males‐80, females‐26) in the age range of 25–65 years. The sexual dimorphism index and demarking points were calculated for all the variables. The data were then subjected to stepwise and direct discriminant function analysis. The best discriminator of sex was the maximum length (84.9%) followed by radial notch width (84%). In stepwise analysis, these two variables were selected and provided an accuracy of 88.7% (M‐87.5%, F‐92.3%). The proximal end provided a classification rate of 81.1% (M‐80%, F‐84.6%) with selection of the notch length and olecranon width.     

Mouth Width and Cupid’s Bow Estimation in a Southern African Population

Standards for estimating mouth width and Cupid’s bow width in craniofacial approximation and superimposition are limited. Currently, the only guideline for mouth width, using direct skeletal references, is a general rule indicating a 75% inter-canine to mouth width ratio. The philtrum, which closely corresponds to the Cupid’s bow, is said to be equal to the inter-superior prominences of the maxillary central incisors. This study tested these guidelines against newly generated regression models and mean values. Cone-beam CT scans of 120 black and 39 white southern African adults were used. Comparative hard and soft tissue measurements were taken using a 3D DICOM viewer. Regression equations accounting population, sex, and approximate age variables (20–39 and 40+ years), utilizing maxillary inter-canine width to estimate mouth width and maxillary central–lateral incisor junction width to estimate Cupid’s bow width, performed statistically best. The regression models were more reliable than existing standards in validation tests.