Evaluation of Direct PCR Amplification Using Various Swabs and Washing Reagents

DNA profiles were generated via direct amplification from blood and saliva samples deposited on various types of swab substrates. Each of the six non-FTA substrates used in this research was punched with a Harris 1.2 mm puncher. After 0.1 μL of blood or 0.5 μL saliva, samples were deposited on each of these punches, samples were pretreated with one of four buffers and washing reagents. Amplification was performed using direct and nondirect autosomal and Y-STR kits. Autosomal and Y-STR profiles were successfully generated from most of these substrates when pretreated with buffer or washing reagents. Concordant profiles were obtained within and between the six substrates, the six amplification kits, and all four reagents. The direct amplification of substrates which do not contain lysing agent would be beneficial to the forensic community as the procedure can be used on evidence samples commonly found at crime scenes.     

The Use of Adhesive Tape for Recovery of DNA from Crime Scene Items

Abstract: The selection of the appropriate method of collection of biological material from crime scene items can be crucial to obtaining a DNA profile. The three techniques commonly used for sampling items are: cutting, swabbing, and taping. The tape sampling technique offers an advantage, in that it enables the collection of a potentially highly informative source of DNA, shed epithelial cells, from selected areas on crime scene items (the inside fingers of a glove, for instance). Furthermore, surface collection of biological material by taping reduces co‐sampling of known PCR inhibitors such as clothing dyes. The correct choice of tape for crime scene item sampling is important. Not all tapes are suitable for biological trace evidence collection as well as DNA extraction. We report on one tape that met both these criteria. Three different cases are presented which demonstrate the usefulness of adhesive tape sampling of crime items. Finally, the advantages of the tape collection technique are discussed and guidelines for preferred areas of tape sampling on various casework items are presented.     

Trace DNA Sampling Success from Evidence Items Commonly Encountered in Forensic Casework

Trace DNA analysis is a significant part of a forensic laboratory's workload. Knowing optimal sampling strategies and item success rates for particular item types can assist in evidence selection and examination processes and shorten turnaround times. In this study, forensic short tandem repeat (STR) casework results were reviewed to determine how often STR profiles suitable for comparison were obtained from “handler” and “wearer” areas of 764 items commonly submitted for examination. One hundred and fifty‐five (155) items obtained from volunteers were also sampled. Items were analyzed for best sampling location and strategy. For casework items, headwear and gloves provided the highest success rates. Experimentally, eyeglasses and earphones, T‐shirts, fabric gloves and watches provided the highest success rates. Eyeglasses and latex gloves provided optimal results if the entire surfaces were swabbed. In general, at least 10%, and up to 88% of all trace DNA analyses resulted in suitable STR profiles for comparison.     

Direct STR amplification from whole blood and blood- or saliva-spotted FTA without DNA purification

The DNA purification step has been thought to be essential for typing of STR DNA. However, this process is time-consuming, and there is a risk of unexpected cross-contamination during purification. We report a new method for direct short tandem repeat (STR) amplification using a newly developed direct PCR buffer, AnyDirect, which can amplify STR loci from whole blood and blood- or saliva-spotted FTA cards without DNA purification. The autosomal and Y chromosomal STR loci were analyzed for whole blood and blood or saliva spots of random individuals, followed by comparison of the results with those of corresponding purified DNA. The results from whole blood and blood spots showed perfect concordance with those from purified DNA without allele or locus drop-out. However, in the case of saliva spots, no amplification or locus drop-out was observed in some of the samples, which offers a topic for further study. Additionally, some commercial hot-start DNA polymerases other than AmpliTaq Gold DNA polymerase were also found to be compatible with this buffer system. Therefore, this direct PCR buffer was demonstrated to be useful for fast forensic DNA analysis or criminal DNA databases for which there is no need to store DNA samples.     

DNA Profiling Success Rates from Degraded Skeletal Remains in Guatemala

No data are available regarding the success of DNA Short Tandem Repeat (STR) profiling from degraded skeletal remains in Guatemala. Therefore, DNA profiling success rates relating to 2595 skeletons from eleven cases at the Forensic Anthropology Foundation of Guatemala (FAFG) are presented. The typical postmortem interval was 30 years. DNA was extracted from bone powder and amplified using Identifiler and Minifler. DNA profiling success rates differed between cases, ranging from 50.8% to 7.0%, the overall success rate for samples was 36.3%. The best DNA profiling success rates were obtained from femur (36.2%) and tooth (33.7%) samples. DNA profiles were significantly better from lower body bones than upper body bones (p = <0.0001). Bone samples from males gave significantly better profiles than samples from females (p = <0.0001). These results are believed to be related to bone density. The findings are important for designing forensic DNA sampling strategies in future victim recovery investigations.     

The Influence of Swabbing Solutions on DNA Recovery from Touch Samples,

There has been minimal research into how to best obtain DNA from touch samples. Many forensic laboratories simply moisten a swab with water and use it for collecting cells/DNA from evidentiary samples. However, this and other methods have not been objectively studied in order to maximize DNA yields. In this study, fingerprints were collected using swabs moistened with water or laboratory or commercially available detergents, including sodium dodecyl sulfate (SDS), Triton X‐100, Tween 20, Formula 409^®, and Simple Green^®. Prints were swabbed, DNA isolated using an organic extraction, yields quantified, and relative yields compared. In all cases, the detergent‐based swabbing solutions outperformed water, with SDS and Triton X‐100 producing significant increases in yield. Short tandem repeat profiles were consistent with the individuals that placed them. Subsequent analysis of SDS concentrations for collecting touch DNA demonstrated an increase in DNA yield with increasing SDS concentration, with an optimal concentration of approximately 2%.     

Recovery of Environmental Human DNA by Insects*,†

Abstract: We tested the hypotheses that foraging insects can acquire human DNA from the environment and that insect‐delivered human DNA is of sufficient quantity and quality to permit standard forensic analyses. Houseflies, German cockroaches, and camel crickets were exposed to dusty surfaces and then assayed for human mitochondrial and nuclear loci by conventional and qPCR, and multiplex STR amplification. Over two experiments, 100% of insect groups and 94% of dust controls tested positive for human DNA. Of 177 individuals, 33–67% tested positive and 13 yielded quantifiable human DNA (mean = 0.022 ± 0.006 ng; mean dust control = 2.448 ± 0.960 ng); four had at least one positive allele call for one or more locus; eight others showed multiple peaks at some loci. Results imply that application to routine forensic casework is limited given current detection methodology yet demonstrate the potential use of insects as environmental samplers for human DNA.     

Developmental Validation of the PrepFiler™ Forensic DNA Extraction Kit for Extraction of Genomic DNA from Biological Samples*

Abstract: The PrepFiler? Forensic DNA Extraction Kit enables isolation of genomic DNA from a variety of biological samples. The kit facilitates reversible binding of DNA with magnetic particles resulting in high DNA recovery from samples with very low and high quantities of biological materials: 0.1 and 40 μL of human blood (donor 2) provided 14 and 2883 ng of DNA, respectively. Following the revised SWGDAM guidelines, performance of the developed method was investigated using different sample types including saliva on swabs, semen stains on cotton fabric, samples exposed to environment, samples with polymerase chain reaction (PCR) inhibitors, blood stains (on denim, cotton cloth, and FTA^® paper), and touch evidence‐type samples. DNA yields for all samples tested were equal or better than those obtained by both phenol–chloroform extraction and commercial kits tested. DNA obtained from these samples was free of detectable PCR inhibitors. Short tandem repeat profiles were complete, conclusive, and devoid of PCR artifacts.     

The application of miniplex primer sets in the analysis of degraded DNA from human skeletal remains

A new set of multiplexed PCR primers has been applied to the analysis of human skeletal remains to determine their efficacy in analyzing degraded DNA. These primer sets, known as Miniplexes, produce shorter amplicons (50-280 base pairs (bp)) than standard short tandem repeat (STR) kits, but still utilize the 13 CODIS STR loci, providing results that are searchable on national DNA databases. In this study, a set of 31 different human remains were exposed to a variety of environmental conditions, extracted, and amplified with commercial and Miniplex DNA typing kits. The amplification efficiency of the Miniplex sets was then compared with the Promega PowerPlex 16 system. Sixty-four percent of the samples generated full profiles when amplified with the Miniplexes, while only 16% of the samples generated full profiles with the Powerplex 16 kit. Complete profiles were obtained for 11 of the 12 Miniplex loci with amplicon sizes less than 200 bp. These data suggest smaller PCR amplicons may provide a useful alternative to mitochondrial DNA for anthropological and forensic analysis of degraded DNA from human skeletal remains.     

High‐Throughput STR Analysis for DNA Database Using Direct PCR,

Since the Korean criminal DNA database was launched in 2010, we have focused on establishing an automated DNA database profiling system that analyzes short tandem repeat loci in a high‐throughput and cost‐effective manner. We established a DNA database profiling system without DNA purification using a direct PCR buffer system. The quality of direct PCR procedures was compared with that of conventional PCR system under their respective optimized conditions. The results revealed not only perfect concordance but also an excellent PCR success rate, good electropherogram quality, and an optimal intra/inter‐loci peak height ratio. In particular, the proportion of DNA extraction required due to direct PCR failure could be minimized to <3%. In conclusion, the newly developed direct PCR system can be adopted for automated DNA database profiling systems to replace or supplement conventional PCR system in a time‐ and cost‐saving manner.     

An Optimized DNA Analysis Workflow for the Sampling,Extraction, and Concentration of DNA obtained from Archived Latent Fingerprints

DNA profiles have been obtained from fingerprints, but there is limited knowledge regarding DNA analysis from archived latent fingerprints—touch DNA “sandwiched” between adhesive and paper. Thus, this study sought to comparatively analyze a variety of collection and analytical methods in an effort to seek an optimized workflow for this specific sample type. Untreated and treated archived latent fingerprints were utilized to compare different biological sampling techniques, swab diluents, DNA extraction systems, DNA concentration practices, and post‐amplification purification methods. Archived latent fingerprints disassembled and sampled via direct cutting, followed by DNA extracted using the QIAamp® DNA Investigator Kit, and concentration with Centri‐Sep? columns increased the odds of obtaining an STR profile. Using the recommended DNA workflow, 9 of the 10 samples provided STR profiles, which included 7–100% of the expected STR alleles and two full profiles. Thus, with carefully selected procedures, archived latent fingerprints can be a viable DNA source for criminal investigations including cold/postconviction cases.     

Increasing Allele Detection by Altering the Quantity of Internal Lane Standard

Electrokinetic injection (EI) is the primary method used in forensic laboratories to load amplified PCR product in capillary electrophoresis for short tandem repeat (STR) fragment separation. Because all samples subjected to capillary electrophoresis use internal lane standard (ILS), this study investigated the consequence of varying the volume of ILS and its effects on allele peak heights and number of alleles detected. Results demonstrated that when the volume of ILS is reduced, the average peak height and number of alleles increased, thereby increasing the sensitivity of the detection method. Sizing anomalies were observed; however, they did not adversely affect accuracy and precision. The method developed in this study offers a simple and universal procedure to increase the alleles detected in forensic STR analysis. Reducing the volume of ILS to achieve greater sensitivity is applicable to all STR amplification kits and capillary electrophoresis instruments currently used in forensic DNA analysis.     

A Powder-free DNA Extraction Workflow for Skeletal Samples

The processing of skeletal material poses several challenges for forensic laboratories. Current methods can be laborious, time-consuming, require dedicated equipment, and are vulnerable to contamination. In this study, various sample mass (1 × 50 mg, 3 × 50 mg, and 1 × 150 mg chip(s)) and incubation times (2, 4, and 16 h) were tested using the PrepFiler^® BTA™ Forensic DNA Extraction Kit to digest whole bone chips in lieu of powdering. The most effective method was then applied to bones and tooth fragments collected from contemporary human cadavers exposed to various environmental conditions using an automated platform. Over a third of the samples tested generated full DNA profiles without having to powder the bone/tooth fragment or further alter the manufacturer's protocol. However, for most samples resulting in incomplete STR profiles due to low amounts of DNA, slightly better results were achieved with powdered tissue. Overall, this work demonstrates the potential use of a faster, nonpowdering DNA extraction method for processing skeletal samples as an effective first-pass screening tool.     

DNA Typing for the Identification of Old Skeletal Remains from Korean War Victims*

Abstract: The identification of missing casualties of the Korean War (1950–1953) has been performed using mitochondrial DNA (mtDNA) profiles, but recent advances in DNA extraction techniques and approaches using smaller amplicons have significantly increased the possibility of obtaining DNA profiles from highly degraded skeletal remains. Therefore, 21 skeletal remains of Korean War victims and 24 samples from biological relatives of the supposed victims were selected based on circumstantial evidence and/or mtDNA‐matching results and were analyzed to confirm the alleged relationship. Cumulative likelihood ratios were obtained from autosomal short tandem repeat, Y‐chromosomal STR, and mtDNA‐genotyping results, and mainly confirmed the alleged relationship with values over 10⁵. The present analysis emphasizes the value of mini‐ and Y‐STR systems as well as an efficient DNA extraction method in DNA testing for the identification of old skeletal remains.     

微量DNA的短串联重复序列分型可行性

目的了解微量DNA分型的法医学应用的可行性。方法一系列浓度的DNA模板用PowerPlexTM16System试剂盒扩增,并用ABI377DNA测序仪进行短串联重复序列(STR)的分型。结果当模板量小于250pg时,部分位点发生了等位基因漏扩,并出现非特异带、杂合子扩增不平衡等干扰分型的杂峰。结论上述这些不正常的现象可能会导致分型错误。在对微量检材的DNA检验结果进行判型时一定要小心谨慎,全面考虑。     

The Effects of Different Maceration Techniques on Nuclear DNA Amplification Using Human Bone

Abstract: Forensic anthropologists routinely macerate human bone for the purposes of identity and trauma analysis, but the heat and chemical treatments used can destroy genetic evidence. As a follow‐up to a previous study on nuclear DNA recovery that used pig ribs, this study utilizes human skeletal remains treated with various bone maceration techniques for nuclear DNA amplification using the standard Combined DNA Index System (CODIS) markers. DNA was extracted from 18 samples of human lower leg bones subjected to nine chemical and heat maceration techniques. Genotyping was carried out using the AmpF?STR^® COfiler^® and AmpF?STR^® Profiler Plus^® ID kits. Results showed that heat treatments via microwave or Biz/Na₂CO₃ in sub‐boiling water efficiently macerate bone and produce amplifiable nuclear DNA for genetic analysis. Long‐term use of chemicals such as hydrogen peroxide is discouraged as it results in poor bone quality and has deleterious effects on DNA amplification.     

Forensic DNA Analysis of Wheat Flour as Commonly Used in White Powder Cases

In the wake of terrorist attacks using anthrax and ricin, white powder is often encountered in cases of malicious mischief and terrorist threats. Wheat flour is a common white powder encountered in such criminal investigations. We used DNA analysis to investigate wheat flour samples for identification and discrimination as trace evidence. Species identification of commercially available wheat flour was carried out by sequencing a partial region of the ribulose bisphosphate carboxylase large subunit gene (rbcL). Samples were discriminated using short tandem repeat (STR) analysis. The rbcL sequences of all wheat flour samples were identical and showed a high level of similarity to known wheat (Triticum aestivum L.) sequences. Furthermore, flours had characteristic patterns in STR analyses, with specific cultivars showing distinctive patterns. These results suggested that the identification of wheat flour species is possible using rbcL sequencing, and that STR analysis is useful for discriminating between samples.     

Identification of Human Remains by DNA Analysis of the Gastrointestinal Contents of Fly Larvae

Dipterous fly larvae (maggots) are frequently collected from a corpse during a criminal investigation. Previous studies showed that DNA analysis of the gastrointestinal contents of maggots might be used to reveal the identity of a victim. However, this approach has not been used to date in legal investigations, and thus its practical usefulness is unknown. A badly burned body was discovered with its face and neck colonized by fly larvae. Given the condition of the body, identification was not possible. Short tandem repeat (STR) typing was performed using the gastrointestinal contents of maggots collected from the victim and was compared to STR profiles obtained from the alleged father. The probability of paternity was 99.685%. Thus, this comparative DNA test enabled the conclusive identification of the remains. This is the first reported case of analysis of human DNA isolated from the gastrointestinal tract of maggots used to identify a victim in a criminal case.     

Evaluation of the Reliability of DNA Typing in the Process of Identification of War Victims in Croatia

Abstract:  Aiming to estimate the frequency of various types of errors that can occur in the large-scale process of identification, we identified and compared genotypes of 911 parent–child pairs in the database of 3498 relatives of people that disappeared during the 1991/1992 war in Croatia. Genotypes of 891 pairs (97.8%) were matching, while 20 pairs did not match in one or more loci. Reanalysis of these samples revealed that out of 1822 analyzed genotypes, one genotype was completely wrong, and two genotypes had one wrong allele because of human errors. Five genotypes had a single wrong allele due to either polymerase chain reaction or electrophoresis errors. In five genotypes mutations were the cause of mismatch. Genetic inconsistencies with parentage were found in four "fathers" (4.2%) and three "mothers" (0.36%). As the majority of observed single-locus errors were caused by nonhuman errors, all databases produced with similar technology would probably have comparable level of errors.     

低拷贝DNA模板检验方法探讨

目的探讨扩增及检测方法对低拷贝DNA模板分型检测灵敏度的影响。方法Control DNA 9947A按比例稀释,采用IdentifilerTM和DNATyper15TM试剂扩增,循环参数设置为28和28+6个循环,平行扩增3次,分别单独检测及3次合并检测,使用310及3130分析仪检测。结果28+6个循环的基因座检出率高于28个循环;等位基因不平衡及丢失与基因座没有特异性的关联,随着DNA模板量的减少,等位基因不平衡及丢失增多;将3次扩增产物混合后检测,等位基因不平衡及丢失情况减少,分型正确率增高。结论模板DNA分3次扩增后混合检测、循环数为28+6,可提高低拷贝模板基因座的检出率。