玻璃刺创形态学特点的初步研究

目的研究玻璃刺创的形态学特点。方法分别用3个厚度为0．31cm带尖状突起的啤酒瓶残端及3块厚度为0．29cm有尖的普通窗玻璃碎片按设定的不同方向刺击带皮猪肉组织,重复此过程3次,形成198例创口,观察、编号、拍照、测量各创口。结果198例创口的整体形态可分为5种类型,即“工”型、“”型、“”型、“上”型与“一”型,各型在不同刺击方向的分布上存在差异,其中前4种为主要类型,共约占总数的93％,其共同点为在损伤的中部出现了一段与损伤整体走向垂直的创口,啤酒瓶残端所致垂直创口的长度为0．31±0．Olcm（x±s）,窗玻璃碎片所致垂直创口的长度为0．29±0．Olcm（x±s）。结论损伤中部有与损伤整体走向垂直的短创口是玻璃刺创中易出现的一种形态学特点,垂直创的长度与致伤玻璃的厚度具有一致性。     

156例道路交通事故活体损伤分析

１５６例道路交通事故活体损伤分析陈新山（武汉同济医科大学法医病理学教研室；武汉４３００３０）ＡＮＡＬＹＳＩＳＯＦ１５６ＣＡＳＥＳＯＦＮＯＮ－ＦＡＴＡＬＩＮＪＵＲＹＩＮＲＯＡＤＴＲＡＦＦＩＣＡＣＣＩＤＥＮＴ￥ＣｈｅｎＸｉｎｓｈａｎ（Ｄｅｐａｒｔｍｅｎｔ...     

家兔死后体表锐器伤出血现象的研究

目的对家兔死后体表锐器损伤出血现象进行研究,以期能够贴近实际办案需要,找到一个更为实用的鉴别生前锐器伤和死后锐器伤的方法。方法家兔脱毛,制作锐器损伤模型,采用大体观察结合HE染色镜下组织病理学观察。结果死后锐器损伤出血量均较少,随着时间延长出血量减少,出血速度慢。死后30min的锐器损伤在形成过程与生前损伤有所区别,但在死后12h肉眼观察结果与生前损伤难以区别。死后1h以上的锐器损伤与生前损伤不同之处在于创缘不会被血染。结论位于尸体低下位置的死后30min内的锐器创与生前锐器创的区别是出血量相对较少。死后60min-90min的锐器伤出血量少,创缘皮肤不被血染,肌肉的出血较局限,与生前损伤相鉴别较容易。     

Forensic medical expert evaluation of gunshot injuries of brain skull

Forensic medical experts are offered a set of morphological signs which help identify the gunshot origin of a skull injury, identify which of the injuries is the inlet and which is the outlet, specify the direction of the shot and succession of formation of injuries in cases with several shots. The author suggests evaluating a gunshot wound in the head with due consideration for the mechanisms of its formation. From a complex of signs of a gunshot injury to the brain skull he singles out the tissue defect with a conical channel and the edge of bone defect, additional injury to the external compact plate near the inlet, and type, number, and location of the radial and concentric cracks. Analysis of the morphology of the above listed signs of gunshot injuries to the skull notable extends the potentialities of forensic medical expert evaluation in cases with gunshot injuries.     

An elliptical incised wound of the breast misinterpreted as a bite injury

Bite injuries upon homicide victims are most often initially identified by the forensic pathologist during the course of the autopsy examination. Following such recognition, the injury or photographs of the traumatized site are then referred to a forensic odontologist for his or her examination, further characterization, and subsequent comparison with any suspect's dentition. However, if the pathologist misidentifies an injury caused by another mechanism as a human bite, this mistake can potentially be perpetuated by the dental consultant, since relatively few dentists regularly examine traumatic injuries other than those arising from bites. To illustrate such an event, a case is presented involving an incised wound of the breast, which was originally identified as an avulsive bite wound. Detailed examination by two odontologic consultants confirmed the wound as having been caused by human teeth, and further, they related the "bite injury" to a specific individual. The bite injury interpretation represented the only scientific evidence implicating the suspect at a subsequent trial for capital murder. Later examination of the tissues and photographs by a forensic pathologist and another dental consultant revealed that the injury was not due to human dentition, but rather resulted from a sharp-edged instrument. These consultants conducted a unique experiment to reduplicate the injury and prove its causation. This information was presented to the jury during the suspect's trial and resulted in his acquittal on all charges.     

Specific Characteristics of Injuries Inflicted by Claw Hammer

Claw hammers have the specific characteristic of having two distinct ends: one a flat head of variable form, the other bifurcated. So the use of this tool as a blunt instrument will cause varying injuries. The authors present two clinical cases of assault with a claw hammer. Examinations revealed two types of wound. A first injury composed of integumentary lacerations and underlying bone injuries in terms of “shape” suggested the use of a blunt instrument. A second injury made up of damage showing two parallel wounds or two wounds located one in the extension of the other suggested the use of an object with a bifurcated end. The combination of both types of injury should alert examiners to the possibility of the use of a claw hammer in causing the injuries in order to help direct investigators in their investigations and in the search for the weapon used.     

碱性成纤维细胞生长因子及其受体在脑损伤时的表达和应用

bFGF是一种广泛存在的多功能肽类生长因子,具有神经营养及促创伤修复功能.脑损伤可诱导bFGF及其特异性受体的表达,表明bFGF参与了CNS损伤后神经细胞的存活与损伤组织的修复过程,具有一定的治疗价值,同时其表达的时序性改变可作为一种客观指标用于法医学脑损伤时间的推断.     

ABC法检测血小板颗粒膜蛋白鉴别生前伤与死后伤

甲抗人血小板α-颗粒膜蛋白140（GMP－140）单克隆抗体，ABC免疫组化方法鉴别生前伤与死后伤．生前皮肤切创和刺创标本创缘上见条状褐色反应带，死后皮肤切创标本创线上未见上述反应带。该法可用于检测短时期发生的生前伤与死后伤。     

小鼠皮肤切创愈合过程中FAP和α-SMA的表达

目的观察小鼠皮肤切创愈合过程中成纤维细胞激活蛋白（fibroblast activation protein,FAP）和α-平滑肌肌动蛋白（α-smooth muscle actin,α-SMA）表达的变化规律。方法应用免疫组织化学和West-ern印迹法检测小鼠皮肤切创后各个时间段FAP和α-SMA表达情况。结果免疫组化结果显示FAP与α-SMA在正常对照组及伤后1h组小鼠皮肤弱表达,伤后6h阳性细胞率开始升高,伤后5dFAP阳性细胞率达高峰,伤后3dα-SMA阳性细胞率达高峰,伤后14dFAP与α-SMA恢复至与对照组相同。Western印迹法检测显示FAP和α-SMA从1d起各个时间段均有表达,其中5d为FAP的表达高峰,3d为α-SMA的表达高峰。结论FAP可作为法医学皮肤切创形成时间的推断指标,α-SMA可作为损伤修复中后期的推断指标,FAP与α-SMA联合使用有望成为推断皮肤损伤时间的有效指标。     

High-quality Digital 3D Reconstruction of Microscopic Findings in Forensic Pathology: The Terminal Pathway of a Heart Stab Wound*

High-quality digital three-dimensional (3D) reconstructions of microscopic findings have been used in anatomical and histopathologic research, but their use in forensic pathology may also be of interest. This paper presents an application of these methods to better characterize the pathway of a stab wound of the anterior surface of the heart in a case of suicide. A portion of the heart wall including the stab wound was serially sectioned for microscopic analysis along the full extent of the wound. Histologic sections were digitally acquired, and a 3D reconstruction was created with ImageJ software for 3D computer graphics. This showed a full-thickness wound path extending to the endocardial surface of the left ventricle, curvilinear in appearance. After correction for shrinkage, 3D reconstruction allowed estimation of the dimensions of the myocardial injury and comparison of the appearance of the wound with the suspected knife used. The curvilinear appearance was considered to reflect injury during myocardial contraction. Complete microscopic sectioning and 3D reconstruction may allow virtual sectioning through various orientations and also provide useful forensic information for selected injuries.     

Stab injuries of the skull and brain

A few cases of skull and brain stab wounds are described and the clinicodiagnostic problems discussed. The injuries often remain unrecognized because the external wound often appears harmless, there are no neurological symptoms, or the clinical picture is interpreted as drunkenness, blunt injury or as another disease. The importance of a precise physical examination of the whole patient's head is pointed out. The refined methods used in modern radiodiagnostics of the skull are the most helpful in correctly recognizing these injuries; there are reports of patients with severe injuries who recovered when the correct diagnosis had been established.     

The Cane Sword

This report provides an overview of the injuries caused by a unique blade‐type weapon known as a cane sword. The cane sword usually consists of a blade that is stored in a cylindrical “cane” that can be released at the handle to reveal the hidden blade within. The victim of the case was found to have a stab wound in the left mid‐back that caused perforation of both the lower and upper lobes of the left lung, resulting in a left hemothorax. Upon autopsy, it was concluded that the patient died from injuries caused by the stab wound to the back. Given the shape of the wound and the fact that the weapon itself was found at the site of the homicide, the weapon that caused the injury was believed to be a cane sword. This case will inform forensic pathologists, law‐enforcement officers, emergency medical personnel, and physicians about rare weapon, the cane sword.     

Optical 3D surface digitizing in forensic medicine: 3D documentation of skin and bone injuries

Photography process reduces a three-dimensional (3D) wound to a two-dimensional level. If there is a need for a high-resolution 3D dataset of an object, it needs to be three-dimensionally scanned. No-contact optical 3D digitizing surface scanners can be used as a powerful tool for wound and injury-causing instrument analysis in trauma cases. The 3D skin wound and a bone injury documentation using the optical scanner Advanced TOpometric Sensor (ATOS II, GOM International, Switzerland) will be demonstrated using two illustrative cases. Using this 3D optical digitizing method the wounds (the virtual 3D computer model of the skin and the bone injuries) and the virtual 3D model of the injury-causing tool are graphically documented in 3D in real-life size and shape and can be rotated in the CAD program on the computer screen. In addition, the virtual 3D models of the bone injuries and tool can now be compared in a 3D CAD program against one another in virtual space, to see if there are matching areas. Further steps in forensic medicine will be a full 3D surface documentation of the human body and all the forensic relevant injuries using optical 3D scanners.     

Suicide with multiple graze shots

A 77-year-old man was found in his flat with a shot to the right temple. In spite of hospital treatment he died from the head injury the next day. The weapon at the scene used for committing the suicide was a pistol, make Kaba Special (calibre 6.35 mm). At autopsy, the right temporal region showed a surgically treated, originally stellate gunshot entrance wound with a powder cavity. Close to this penetrating gunshot wound there were 3 parallel graze shot injuries of the scalp. The autopsy findings were consistent with the assumption that all the shots had been fired by the victim himself with suicidal intent. The injury pattern is presented and discussed in relation to the results of the technical investigation of the weapon and the findings at the scene.     

Fatal Penetrating Injuries Sustained by High-pressure Water Jet Unit

The high-pressure water jet unit is a generator of frequent burst of water jets. The water jet reaches very high speeds and is able to cause wounds similar to those of high-velocity projectiles. In the presented case, unusual fatal injuries sustained by water jet are presented. Operating with the unit, an untrained worker accidentally activated a high-pressure water jet unit, and the extremely high pressure of water liberated the jet unit from his hand and whirled it around him. A jet stream of water ran across his body and caused fatal penetrating injuries in the femoral region. The edges of the wound were mainly sharp with contusion rings on the skin beyond the edges. Exploring the inside of the canals during the autopsy, the left femoral artery and vein were found to be completely transected. The resemblance to a firearm entry wound and the severity of the internal injury make it a noteworthy entity.     

116例女性杀人案件法医学分析

本文通过对1993~2014年连云港地区116例女性杀人案件的受害人年龄分布、嫌疑人与受害人关系、现场特征、损伤工具及致命伤位置等进行统计分析,发现男女性之间由于心理、生理特征和性格等多种因素的影响,女性杀人案件呈现出自身特点:女犯罪嫌疑人与被害人的关系多为家庭内部成员,尤以夫妻或男女朋友居多;现场常位于室内,以卧室居多;工具多是居家常用的生产或生活用具;多选择受害人熟睡、酒后时作案,采用窒息、投毒、溺水等方式;损伤集中于要害部位,分布范围集中,打击次数多,致命性损伤、濒死伤和死后损伤多。     

A "skin-skull-brain model" for the biomechanical reconstruction of blunt forces to the human head

In order to create and study blunt force wound morphology, a "skin-skull-brain model" had to be designed which would make the laboratory reproduction of a blunt force injury to the head possible. During the evaluation of the "skin-skull-brain model", it was possible to show that injuries inflicted to this model are fully comparable to the morphology of equivalent real blunt forces injuries to humans. Utilization of the "skin-skull-brain model" presents some significant advantages: the model is inexpensive, easy to construct, instantly available for use, and eliminates ethics conflicts. The main advantage of such a model is, in comparison with biological substances, the high reproducibility of experimentally inflicted traumas.     

船舶螺旋桨损伤特点及成伤机制

目的总结船舶螺旋桨损伤的主要特点,探讨螺旋桨损伤的特点及形成机制,探索螺旋桨损伤与碎尸的鉴别方法。方法收集浙江省湖州地区1994─2005年尸检的100余例船舶螺旋桨损伤案例,对螺旋桨造成的损伤（擦划伤、表皮剥脱、创、骨折和全部离断创）的特点,以及衣着特征,进行回顾性分析。并与常见碎尸案中使用的工具造成的断面特征进行比较。结果船舶螺旋桨损伤是高速旋转螺旋桨的巨大劈力和机械切削所造成的损伤;碎尸是人为使用锐器切割或砍击尸体。两者由于形成机理、作用力及反作用力大小不同,导致损伤断面呈现不同的特征。结论船舶螺旋桨损伤具有独特的特征,可与碎尸损伤进行鉴别。     

Injuries to law enforcement officers: the backface signature injury

In today's law enforcement community, one of the most vital tools an officer can possess is personal body armor. However, a recent Department of Justice investigation has raised important questions regarding the protection actually afforded officers through the use of personal body armor, and the current test methods used to assess the armor. Test results show that most Zylon-containing vests showed deformations in excess of the 0101.04 Standard's 44 mm backface signature limit. Such increased deformation can lead to serious injuries, including backface signature injuries, which have occurred in the field. Although the vest is successful in containing the round, it is not effectively dissipating the energy enough to prevent large amounts of vest deformation at the area of impact. Therefore, open, penetrating wounds occur even though the bullet did not penetrate the vest. The objective of the current study was to further define the backface signature injury through the use of case studies and laboratory experiments. Following the case study investigation, backface signature testing was conducted using a clay medium based on the NIJ 0101.04 Standard. The final component of this research involved the use of post-mortem human specimens (PMHS) for further investigation of the backface signature injury. Although the underlying cause of backface signature injuries is unknown, energy density is likely to play a role in the mechanism. Energy density (E/a) is defined as the energy per unit area and has been previously used in less lethal skin penetration research. Further research into the underlying causes of backface signature injuries is necessary. In addition to armor testing, the study of law enforcement personnel who have been shot while wearing soft body armor is also a valuable tool for determining the effectiveness of certification standards. Finally, it is important for medical personnel to recognize the backface signature injury and document this as a type of injury separate from blunt trauma or penetrating trauma behind armor injuries. Detailed knowledge of the injury, including the depth of the wound, would be beneficial to the scientific community.     

256例儿童和少年道路交通事故伤残评定回顾性研究

目的 探讨儿童和少年道路交通事故活体损伤的流行病学、损伤及伤残评定特点。方法 对256例儿童和少年道路交通事故伤残评定资料进行回顾性研究。结果 男性多于女性,多见于6～18岁儿童,交通事故每天10～12时和16～18时最多,车辆类型以小汽车和货车多见,肇事方式多见于机动车与行人相撞,伤者的交通方式以步行多见,损伤部位以头部和四肢多见,损伤类型以骨折、挫伤、创多见,但内脏损伤相对较轻,下肢骨折远多于上肢。损伤程度多评定为轻伤,伤残程度以Ⅸ、Ⅹ级轻度伤残为主(33.2％)。结论 儿童和少年道路交通事故伤残评定应适当放宽标准,伤残评定标准应增加儿童和少年的有关条款。