激光剥蚀电感耦合等离子体质谱技术检测车辆油漆金属元素

目的建立车辆油漆的激光剥蚀电感耦合等离子体质谱（laser ablation inductively coupled plasma mass spectrometry,LA—ICP—MS）分析方法。方法对38种车辆油漆样品采用激光剥蚀,电感耦合等离子体质谱进行测定,通过各油漆样品本含有金属元素种类和金属元素响应相对比值的差异对油漆样品进行区分。结果38种样品中有30种可直接依据所含金属元素种类的差异进行对其进行区分,其余8种依据元素间响应值比值的差异进行区分,方法重现性良好,精密度（RSD）小于10％。结论所建立的LA—ICP—MS方法简便快速、精密度良好、对样品微损,适用于法庭科学对车辆油漆的检测。     

The development of analytical and interpretational protocols to facilitate the provenance establishment of polycarbonate headlamp lens material

Despite the forensic significance of polycarbonate headlamp lenses, robust analytical protocols to facilitate their discrimination are scarce. In this study, laser ablation inductively coupled plasma mass spectrometry has been applied to the analysis of polycarbonate headlamp lenses with multivariate chemometrics techniques utilized to facilitate interpretation of the data. The analytical protocol involves the analysis of 46 analytes on material comprising the exterior surface of the lens. Using this data, it was found that although minor variation exists within a single headlamp lens, discrimination between lenses produced from a single manufacturing plant was still possible using iterative forward stepwise linear discriminant analysis processes. Discrimination between all headlamp lenses, with the exception of some lenses produced on the same day in a single plant, could be achieved using the analytical protocol. Furthermore, an interpretational protocol has been developed that has successfully classified all tested headlamp lens samples, within the discrimination limits of the analytical method.     

Provenance determination of oriental porcelain using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS)

The sale of fraudulent oriental ceramics constitutes a large proportion of the illegal artifact and antique trade and threatens to undermine the legitimate international market. The sophistication and skill of forgers has reached a level where, using traditional appraisal by eye and hand, even the most experienced specialist is often unable to distinguish between a genuine and fraudulent piece. In addition, current provenancing techniques such as energy-dispersive X-ray fluorescence (EDXRF) spectrometry and thermoluminescence (TL) dating can result in significant damage to the artifact itself. Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), a relatively nondestructive analytical technique, has been used for the provenance determination of materials based on geographical origin. The technique requires the production of a laser crater, c. 100 microm in diameter, which is essentially invisible to the naked eye. Debris from this crater is analyzed using ICP-MS, with the results forming the basis of the provenance establishment protocol. Chinese, Japanese, and English porcelain shards have been analyzed using this protocol and generic isotopic distribution patterns have been produced that enable the provenance establishment of porcelain artifacts to their country of production. Minor variations between elemental fingerprints of artifacts produced in the same country also indicate that it may be possible to further provenance oriental ceramics to a specific production region or kiln site.     

Using Cluster Analysis and ICP‐MS to Identify Groups of Ecstasy Tablets in Sao Paulo State,Brazil

The variations found in the elemental composition in ecstasy samples result in spectral profiles with useful information for data analysis, and cluster analysis of these profiles can help uncover different categories of the drug. We provide a cluster analysis of ecstasy tablets based on their elemental composition. Twenty‐five elements were determined by ICP‐MS in tablets apprehended by Sao Paulo's State Police, Brazil. We employ the K‐means clustering algorithm along with C4.5 decision tree to help us interpret the clustering results. We found a better number of two clusters within the data, which can refer to the approximated number of sources of the drug which supply the cities of seizures. The C4.5 model was capable of differentiating the ecstasy samples from the two clusters with high prediction accuracy using the leave‐one‐out cross‐validation. The model used only Nd, Ni, and Pb concentration values in the classification of the samples.     

Photo‐ and Thermal‐Degradation Studies of Select Eccrine Fingerprint Constituents

Abstract: Photo‐ and thermal‐degradation studies on eccrine fingerprint components are presented herein. Dilute distinct solutions of urea, lactic acid, and seven amino acids were deposited on steel coupons and Teflon^® disks, exposed to artificial sunlight or heat, extracted, and analyzed. This aim of this study was to determine whether the investigated eccrine components, previously determined to be Raman active for a parallel study, experienced photo‐ or thermally induced degradation, and if so, to determine the rate and identify any detectable products. Neither the amino acids nor urea exhibited photo‐degradation; however, when heated for a period of three minutes, the onset of thermal‐degradation was initiated at 100°C for the amino acids and 100°C for urea. Lactic acid, the major polymerization initiator of superglue fuming, showed photochemical and thermal‐degradation. These results could be used for future development of new latent fingerprint visualization methods, especially when lactic acid is degraded.     

Acute arsenic poisoning: clinical, toxicological, histopathological, and forensic features

This report describes a suicide case by acute arsenic intoxication via intravenous injection. A 30-year-old woman injected arsenic As (V) (sodium arseniate disodique: Disodium Hydrogena Arsenik RP) in a successful suicide attempt. Three hours following administration, the woman developed severe digestive symptoms. She was admitted to a hospital and transferred to the intensive care unit within 12 h of the massive administration of arsenic. Despite therapeutic efforts, over the next 2 h she developed multiorgan failure and died. A postmortem examination was performed. Pulmonary edema and congestion of liver were apparent. As (V) and As (III) were determined by high performance liquid chromatography and inductively coupled plasma mass spectrometry after mineralization of samples by concentrated nitric acid. Toxicological analysis revealed high concentrations of arsenic in biological fluids as well as in organs. Histopathological examination showed a typical indication of myocarditis. These findings were in agreement with acute arsenic poisoning. The symptoms developed by this young woman (intoxication by intravenous administration) were comparable to oral intoxication. The clinical signs, survival time, and administration type are discussed in light of the literature on acute and chronic arsenic poisoning.     

微波消解ICP-MS法检测生物检材中汞元素

目的 建立生物检材中汞的电感耦合等离子体质谱分析方法.方法 采用微波消解法处理样品,以铟(115In)作内标,用电感耦合等离子体质谱仪对血液、尿液和头发中的汞含量进行分析.选择金与汞形成金汞齐,对金消除汞记忆效应的能力进行考察.结果 方法检出限为0.01μg/L,准确度为97.0%～107.1%.检测中添加金质量浓度在...     

血液中Cr、Cd、As、Tl和Pb的电感耦合等离子体质谱分析

目的 建立血液中Cr、Cd、As、Tl和Pb的电感耦合等离子体质谱(ICP-MS)分析方法. 方法血液采用微波消解仪进行处理,以115In元素作内标,使用ICP-MS方法对血液中Cr、Cd、As、Tl和Pb进行分析.结果 方法检出限为0.00001～0.00249μg/L,准确度为90.1%～110.7%,精密度为4.0%～7.9%. 结论建立的方法准确、快速、线性范围宽、灵敏度高,适用于Cr、Cd、As、Tl和Pb中毒案件的检测.     

Forensic Analysis of Cigarette Ash—Brand Determination Through Trace‐metal Analysis

The information inherent in cigarette ash in the form of trace‐metal concentrations may be of use in a forensic context as it can indicate the brand from which the ash originated. This knowledge might help place suspects at crime scenes or determine how many people may have been present. To develop and test statistical models capable of classifying ash samples according to brand, commercial cigarettes procured in the U.S. and overseas were “smoked” using a peristaltic pump, mimicking the range of human smoking habits. Ash samples were digested in a mixture of nitric and hydrochloric acid applying microwave digestion and analyzed using inductively coupled plasma‐mass spectrometry. Principal component analysis of the elemental data showed intrinsic differences between brands. Partial least squares‐discriminant analysis demonstrated that brand classification yields good sensitivity and specificity for a number of models tested. Varying smoking parameters did not impact the classification of ash samples.     

Characterization of Undigested Particulate Material Following Microwave Digestion of Recycled Document Papers

Abstract:  Recycled document paper was microwave digested in a solution of HNO₃ and H₂O₂ prior to analysis by inductively coupled plasma mass spectrometry (ICP-MS) to determine the trace elemental concentrations within the paper. Undigested particulate material was observed and subsequently characterized as a mixture of kaolin (clay) and TiO₂ by Fourier transform infrared spectroscopy and X-ray diffraction spectroscopy. The effect of the particulate material on the elemental concentrations was then investigated. Paper samples were completely digested in hydrofluoric acid (HF) and element concentrations determined in the HF and HNO₃/H₂O digests were statistically compared using Student's t -test (95% confidence limit). Statistical differences in element concentrations between the two digests were observed for only four elements and there was no evidence of element adsorption by the particulate material. Hence, the HNO₃/H₂O₂ digestion proved sufficient to digest paper for ICP-MS analysis, eliminating the need to use the hazardous and corrosive HF matrix.     

Differentiation of bullet type based on the analysis of gunshot residue using inductively coupled plasma mass spectrometry

Porcine tissue samples shot with two different types of bullets, jacketed and nonjacketed, were collected in the fresh state and throughout moderate decomposition. Wound samples were microwave-digested and analyzed using inductively coupled plasma mass spectrometry (ICP-MS) to detect all elements present at measurable levels in gunshot residue (GSR). Elements detected included antimony (Sb), barium (Ba), and lead (Pb), which are considered characteristic of GSR, as well as iron (Fe) and copper (Cu). These five elements were used to differentiate shot tissue and unshot tissue, as well as tissue shot by the two different bullet types, both in the fresh state and throughout moderate decomposition. The concentrations of Cu, Sb, and Pb were able to distinguish the two bullet types in fresh tissue samples at the 95% confidence level. Cu and Pb were able to differentiate the bullet types throughout moderate decomposition at the 99% confidence level.     

Detection of Pb,Ba, and Sb in Cadaveric Maggots and Pupae by ICP-MS*

The concentrations of lead (Pb), barium (Ba), and antimony (Sb), characteristic of GSR, were determined in soil sediments and immature (larvae) of cadaveric flies of the family Calliphoridae, by inductively coupled plasma mass spectrometry (ICP-MS). This research refers to a case study from two real crime scenes in which the corpses were in an advanced state of decomposition. In case 1, the victim had holes similar to gunshot wounds, and in case 2, there was no evidence of perforations in the corpse. Soil sediment collection was performed at three different points of the terrain, at a minimum distance of 10 m from the corpse, for cases 1 and 2. In relation to the collection of immatures, larvae were collected in regions of the mouth, nose, and orifices similar to the entry of firearms projectile into the body, for case 1, and collection of larvae and pupae, located on the body and underneath it, for case 2. It was possible to detect and quantify the three elements of interest (Pb, Ba, and Sb) by ICP-MS in both sediment and cadaveric larvae. Concentrations of 4.44, 8.74, and 0.08 μg/g were obtained for Pb, Ba, and Sb, respectively, in the soil for case 1. For the case 2, the concentrations in Pb, Ba, and Sb were from 16.34 to 26.02 μg/g; from 32.64 to 57.97 μg/g and from 0.042 to 0.30 μg/g, respectively. In the larvae, Pb, Ba, and Sb were quantified in cases 1 and 2 with a concentration of 6.28 and 1.78 μg/g for Pb, 1.49 and 2.94 μg/g for Ba, 0.50 μg/g and <LD for Sb, respectively. These new results present the detection of characteristic elements of GSR in cadaveric larvae in humans in a real crime scene, besides highlighting the importance of the study of immature flies, using the ICP-MS technique in forensic analysis.     

Carbon‐Based Fingerprint Powder as a One‐Step Development and Matrix Application for High‐Resolution Mass Spectrometry Imaging of Latent Fingerprints

Carbon‐based materials are often used as matrices for matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) and its imaging (MALDI‐MSI). However, researchers have refrained from using carbon‐based fingerprint powder (CFP) as a matrix due to high background and contamination. In this work, the compatibility of CFP is reevaluated with MALDI‐MSI using a high‐resolution mass spectrometer (HRMS) and compared to traditional organic matrices. Relevant fingerprint compounds were easily distinguished from carbon cluster peaks when using HRMS. For fair comparison, half of a fingerprint was dusted with CFP while the other half was dusted with traditional organic matrices. All compounds studied had comparable, or higher, signal‐to‐noise (S/N) ratios when CFP was used as the matrix. Additionally, chemical image qualities closely followed the trend of S/N ratios. CFP proved to be an effective one‐step development and matrix application technique for MALDI‐MSI of latent fingerprints, when carbon cluster peaks are well separated by a HRMS.     

Effect of chloride ion concentration on the galvanic corrosion of α phase brass by eccrine sweat

Inductively coupled plasma mass spectrometry measurement of the relative concentration of sodium, chloride, calcium, and potassium ions in eccrine sweat deposits from 40 donors revealed positive correlations between chloride and sodium (ρ = 0.684, p < 0.01) and chloride and calcium ions (ρ = 0.91, p < 0.01). Correlations between ion concentration and the corrosion of α phase brass by the donated sweat were investigated by visual grading of the degree of corrosion, by measuring the copper/zinc ratio using energy-dispersive X-ray spectroscopy, and from a measurement of the potential difference between corroded and uncorroded brass when a large potential was applied to the uncorroded brass. An increasing copper/zinc ratio (indicative of dezincification) was found to correlate positively to both chloride ion concentration and visual grading of corrosion, while visual grading gave correlations with potential difference measurements that were indicative of the preferential surface oxidation of zinc rather than copper.     

The Survival of Gunshot Residues in Cremated Bone: An Inductively Coupled Plasma Optical Emission Spectrometry Study

Gunshot residue (GSR) has been sought and demonstrated on many types of material and with many techniques. Inductively coupled plasma optical emission spectrometry (ICP‐OES) could be a useful method on difficult substrates, but a systematic study on burnt material has never been performed. Hence, this study aims at evaluating the usefulness and reliability of this method on burnt samples. Sixteen adult bovine ribs (eight with soft tissues, eight totally skeletonized) were shot using two kinds of projectile (both 9 mm full metal‐jacketed or unjacketed). Then, every sample was led to complete calcination in an electric oven. The area of the gunshot entrance wound was swabbed and analyzed by ICP‐OES; the results were also correlated with a previously published parallel study by scanning electron microscopy (SEM) equipped with an SEM–energy dispersive X‐ray analyzer. ICP‐OES proved to be very sensitive and reliable even on degraded material and can be an appropriate nondestructive method for detecting residues on difficult and delicate substrates such as burnt bone.     

Determination of Trace Elemental Concentrations in Document Papers for Forensic Comparison Using Inductively Coupled Plasma–Mass Spectrometry

Abstract:  With improvements in manufacturing procedures, comparing physical characteristics of paper samples may not offer sufficient discrimination among different vendors. In this work, the potential to differentiate paper samples based on trace element concentrations was investigated. Paper samples from two different vendors were microwave-digested and trace element concentrations (Mg, Al, Mn, Fe, Sr, Y, Ba, Ce, and Nd) were determined using inductively coupled plasma–mass spectrometry. Differences in concentration were assessed statistically using two-way ANOVA and Tukey's honestly significant differences test. Elemental concentrations were shown to be consistent across a single sheet as well as within a single ream of paper for each vendor. Reams from vendor A were differentiated based on Al and Ba concentration while reams from vendor B were differentiated based on Mg, Mn, and Sr concentrations. Paper was differentiated according to vendor based on significant differences in Ba, Sr, Ce, and Nd concentrations.     

Elemental analysis of human cremains using ICP-OES to classify legitimate and contaminated cremains

The Tri-State Crematory Incident in Nobel, GA (February 2001) revealed limitations in traditional human cremated remains (cremains) analytical methodology. The goal of this study was to develop a method for effectively classifying questionable sets of cremains as legitimate or contaminated. Eighty-eight samples of known human cremains, concrete, mixtures of the two, and questionable sets of cremains were acid digested and analyzed for 21 elements by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). Variable cluster and principle component analyses identified the seven elements (Sb, B, Li, Mn, Sr, Tl, and V) used to develop discriminant functions to classify questionable sets into two groups: cremains and concrete. The discriminant analysis shows that at the 0.90 probability level, mixtures of 50% or less human content were classified as concrete. Mixtures with 90% human content classified as cremains. Sixty percent and 75% human content mixtures remained in the questionable classification, but as the concentration of human increased in the mixture, the probability of assignment to the known cremains group increased. Most of the questionable human samples classified as cremains. This is a pilot study and cannot yet satisfy Daubert standards for courtroom admissibility, but it indicates that it is possible to determine the legitimacy of cremains using elemental analysis by ICP-OES coupled with multivariate statistical analysis.     

Detection of Gunshot Residue in Blowfly Larvae and Decomposing Porcine Tissue Using Inductively Coupled Plasma Mass Spectrometry (ICP‐MS)*

Abstract: Blowfly larvae and porcine tissue contaminated with gunshot residue (GSR) were collected during summer and winter months, over a 37‐day and a 60‐day sampling period, respectively. Wound samples were microwave‐digested and analyzed by inductively coupled plasma mass spectrometry (ICP‐MS) for the detection of antimony, barium, and lead. During summer, the 37‐day sampling period encompassed all stages of decomposition, except skeletonization. The three elements were detected in larvae only on days 3 and 4 after death but were detected at significant levels in tissue samples throughout the entire sampling period. In winter, no significant decomposition was observed throughout the 60‐day sampling. Although temperatures were too low for blowfly activity, the three elements were detected in the tissue samples at relatively constant, significant levels. Hence, GSR determination in tissue was more dependent on decomposition stage rather than time since death.     

Differentiation of Commercially Available Kratom by Purported Country of Origin using Inductively Coupled Plasma–Mass Spectrometry,

Kratom is a plant material exhibiting both analgesic and stimulant effects and is also forensically relevant since it is abused as a “legal high.” It is regulated in several countries but not scheduled in the United States at the federal level. This study used inductively coupled plasma–mass spectrometry (ICP–MS) to measure the concentrations of 13 elements in 19 kratom samples obtained from an online distributor selling kratom, from Borneo, Malaysia, Indonesia, Thailand, and Vietnam, for the purpose of using the elements to discriminate among purported country of origin, “suborigin,” and strain. Analysis of variance revealed statistical differences in concentrations of elements from each group, while discriminant function analysis (using leave-one-out classification) successfully classified kratom samples by their purported country of origin (100%), “suborigin,” (100%), and strain (86%). Our method illustrates the possibility of utilizing ICP–MS for determination of commercially available kratom samples by purported origin, “subororign,” or by product line.     

电感耦合等离子体质谱法检测电流损伤皮肤中金属元素

目的探讨应用电感耦合等离子体质谱(inductively coupled plasma mass spectrometry,ICP-MS)技术检测电流损伤皮肤中金属元素的可行性,建立检测电流损伤皮肤中金属元素的方法。方法用黄铜、紫铜、铝、铁电极材料以220V交流电电击家兔后肢,ICP-MS对电流损伤皮肤中金属元素进行检测。结果与对照组比较:黄铜电击组皮肤中的Cr、Ni、Cu、Zn、Pb含量升高(P0.05),紫铜电击组皮肤中的Cr、Cu、Pb含量升高(P0.05),铝电击组皮肤中的Al、Cr、Mn、Co、Ni、Cu、Pb含量升高(P0.05),铁电击组皮肤中的Cr、Mn、Fe、Ni含量升高(P0.05)。不同电极材料电击后皮肤中元素种类及含量也存在明显差异。结论ICP-MS可作为检测电流损伤皮肤中金属元素的有效方法,且可应用于触电材料的推断。