The Compatibility of Fingerprint Visualization Techniques with Immunolabeling

The chemical composition of a fingermark potentially holds a wealth of information about the fingermark donor, which can be extracted by immunolabeling. Immunolabeling can be used to detect specific components in fingermarks; however, to be applicable in the forensic field, it should be compatible with commonly used fingerprint visualization techniques. In this study, the compatibility of immunolabeling with two different fingerprint visualization techniques, magnetic powdering and ninhydrin staining, was investigated on fingermarks deposited on glass and on nitrocellulose membranes. With dermcidin as antigen of interest, immunolabeling was performed successfully on all developed fingermarks. We can conclude that immunolabeling is compatible with magnetic powdering and ninhydrin staining, which can be of great forensic value.     

Separation of visibly-excited fluorescent components in fingerprint residue by thin-layer chromatography

The use of lasers for the detection of fingermarks is widespread in the forensic field. Despite this, and the fact that many studies have been conducted into the composition of fingermark residue, the components responsible for the inherent visible fluorescence remain unidentified. Traditionally compositional studies have been performed on sweat, sebum, or skin surface washes, none of which are truly representative of the situation when a fingerprint is deposited on a surface. In this paper thin-layer chromatography (TLC) has been performed on sebum-rich fingermarks laid directly onto TLC plates and an argon ion laser used to visualize the separated components. It has been found to be a robust and reproducible method for studying the fluorescent components in fingermark residue and is considered to be more realistic than other methods of sample preparation as it eliminates the chances of extraneous matter being extracted from the skin surface. Investigations into the nature of the separated compounds have also been made and the results are reported.     

Comparison of the Columnar‐Thin‐Film and Vacuum‐Metal‐Deposition Techniques to Develop Sebaceous Fingermarks on Nonporous Substrates,

Both the columnar‐thin‐film (CTF) and the vacuum‐metal‐deposition (VMD) techniques for visualizing sebaceous fingermarks require the deposition of a material thereon in a vacuum chamber. Despite that similarity, there are many differences between the two techniques. The film deposited with the CTF technique has a columnar morphology, but the film deposited with the VMD technique comprises discrete islands. A split‐print methodology on a variety of fingermarked substrates was used to determine that the CTF technique is superior for developing fingermarks on clear sandwich bags and partial bloody fingermarks on stainless steel. Both techniques are similar in their ability to develop fingermarks on glass but the CTF technique yields higher contrast. The VMD technique is superior for developing fingermarks on white grocery bags and the smooth side of Gloss Finish Scotch Multitask^? tape. Neither technique worked well for fingermarks on black garbage bags.     

Fixing Transient Iodine on Developed Latent Fingermarks

In the present study, a simple and novel fume–mist technique is described which can be used efficiently to fix the latent fingermarks developed using iodine. It is well known that the residues left over in the fingermarks interact with iodine to give transient brown impressions which disappear in a short time. Also, iodine forms colored complexes with various organic solvents. Based on iodine–fingermark interaction and iodine–solvent complex formation, latent fingermarks were developed on paper surface using iodine fumes which were subsequently fixed by spraying polar and nonpolar solvents. The fingermarks developed with this technique were not only clear but also permanent in nature. The interaction of fingermark residue, iodine, and solvent forming a ternary structure is believed to be a possible reason for the stability of iodine‐developed fingermarks. Ease of method, availability of chemicals, and minimum training make the method adaptable in routine development of forensic fingermarks present on paper surface.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

An investigation into the enhancement of fingermarks in blood on fruit and vegetables

A number of studies have reported the successful enhancement of latent fingermarks on fruit and vegetables. A study was set up to identify the most effective technique for the enhancement of fingermarks in blood on various fruit and vegetables. The enhancement techniques targeted different components in blood and consisted of protein stains (e.g. acid black 1), peroxidase reagents (e.g. leuco crystal violet) and amino acid stains (e.g. ninhydrin). Different variables such as the ageing periods of the marks and a diminishing series were employed to assess the suitability and sensitivity of the enhancement techniques.Overall, the use of different protein stains appeared to be the most effective techniques for the enhancement of fingermarks in blood on fruit and vegetables. In addition, the aubergine and cucumber skins appeared to be the most responsive surface to the different chemical techniques during enhancement. On the contrary, little or no enhancement was achieved for fingermarks in blood on the nectarine fruit.     

The effect of household corrosive substances on latent fingermark development in the context of deliberate corrosive substance attacks

Corrosive substance attacks (CSA) are a prevalent issue in the UK with 525 offenses involving a corrosive substance reported to the police in the year ending March 2022. Easy availability, low cost, and concealability in public are common reasons for choosing a corrosive substance as a weapon. The Metropolitan Police revealed that 68% of 1849 CSA cases resulted in no suspect identified or evidential difficulties. There is limited research into the effect of corrosive substances on latent fingermarks. This study aimed to determine the potential for fingermarks to be recovered from surfaces exposed to a household corrosive substance within the context of a deliberate CSA. Natural and sebaceous-loaded fingermarks were exposed to Domestos bleach, Harpic limescale remover (hydrochloric acid-based) and lemon juice. Harpic limescale remover had the most detrimental effect, with only 7.1% of fingermarks (n = 378) exposed being identifiable (defined as sufficient clear ridge detail for identification) after enhancement, followed by bleach with only 10.3% of fingermarks (n = 378) identifiable. Lemon juice had the least detrimental effect on fingermarks, with 40.5% fingermarks (n = 378) identifiable compared to 53.4% for the controls (not exposed to any substance; n = 378). Throughout the study, fewer natural fingermarks were identifiable after exposure to corrosive substances compared to sebaceous fingermarks which was as expected. Overall, this study demonstrated that there is potential to recover latent fingermarks, depending on their composition, following exposure to a household corrosive substance. This area warrants further research to establish best practice to maximize the potential to recover identifiable fingermarks.     

Introducing a semi-automatic method to simulate large numbers of forensic fingermarks for research on fingerprint identification

Statistical research on fingerprint identification and the testing of automated fingerprint identification system (AFIS) performances require large numbers of forensic fingermarks. These fingermarks are rarely available. This study presents a semi-automatic method to create simulated fingermarks in large quantities that model minutiae features or images of forensic fingermarks. This method takes into account several aspects contributing to the variability of forensic fingermarks such as the number of minutiae, the finger region, and the elastic deformation of the skin. To investigate the applicability of the simulated fingermarks, fingermarks have been simulated with 5-12 minutiae originating from different finger regions for six fingers. An AFIS matching algorithm was used to obtain similarity scores for comparisons between the minutiae configurations of fingerprints and the minutiae configurations of simulated and forensic fingermarks. The results showed similar scores for both types of fingermarks suggesting that the simulated fingermarks are good substitutes for forensic fingermarks.     

Preparation of Artificial Blood from the Extract of Legume Root Nodules,and the Creation of Artificial Latent Fingermarks in Blood Using Artificial Blood,

Distribution of homogeneous fingermarks in blood is essential for conducting proficiency tests in forensic science. Hence, the artificial blood was prepared using the root nodule extract of Glycine max plants. The reactivity of the artificial blood with widely used human blood detection reagents was tested. Artificial latent fingermarks in blood were printed using an inkjet cartridge case filled with artificial blood solution. The artificial latent fingermarks in blood were developed with amino acid‐sensitive reagents and could obtain development as prominent as the image of the master fingermark saved on the computer. Therefore, it has been confirmed that the extract of legume root nodules can be used as artificial blood, and the artificial blood can be used for the preparation of artificial latent fingermarks or footmarks in blood.     

Exposing latent fingermarks on problematic metal surfaces using time of flight secondary ion mass spectroscopy

Fingermarks are a key form of physical evidence for identifying persons of interest and linking them to the scene of a crime. Visualising latent (hidden) fingermarks can be difficult and the correct choice of techniques is essential to develop and preserve any fingermarks or other (e.g. DNA) evidence that might be present. Metal surfaces (stainless steel in particular) have proven to be challenging substrates from which to reliably obtain fingermarks. This is a great cause for concern among police forces around the globe as many of the firearms, knives and other metal weapons used in violent crime are potentially valuable sources of fingermark evidence. In this study, a highly sensitive and non-destructive surface science technique called time of flight secondary ion mass spectroscopy (ToF-SIMS) was used to image fingermarks on metal surfaces. This technique was compared to a conventional superglue based fuming technique that was accompanied by a series of contrast enhancing dyes (basic yellow 40 (BY40), crystal violet (CV) and sudan black (SB)) on three different metal surfaces. The conventional techniques showed little to no evidence of fingermarks being present on the metal surfaces after a few days. However, ToF-SIMS revealed fingermarks on the same and similar substrates with an exceptional level of detail. The ToF-SIMS images demonstrated clear ridge definition as well as detail about sweat pore position and shape. All structures were found to persist for over 26?days after deposition when the samples were stored under ambient conditions.     

A Small Population Study on Friction Skin Ridges: Differences in Ridge Widths Between Latent and Inked Fingerprints

Morphological changes in the width of latent fingermark ridges occur naturally over time. This could be used to examine the aging process of latents and eventually estimate time of deposition. In a crime context, it is common practice to compare a questioned (aged) fingermark with a database of known (inked) prints. Therefore, in the absence of fresh fingermarks for aging purposes, it is of interest to reveal correlations between these two categories of fingerprints with regard to the widths of their ridges. The present study explores correlations of ridge widths between flat and rolled inked prints with latent fingermarks visualized with carbon black (CB) and titanium dioxide (TiO₂)-based powders among a small population of ten donors. Results revealed consistent differences between the ridge widths of latent and inked prints as well as flat and rolled impressions. Latent fingermarks visualized with CB and TiO₂ powders showed ridges with comparable widths.     

Solid-state acquisition of fingermark topology using dense columnar thin films

Various vacuum techniques are employed to develop fingermarks on evidentiary items. In this work, a vacuum was used to deposit columnar thin films (CTFs) on untreated, cyanoacrylate-fumed or dusted fingermarks on a limited selection of nonporous surfaces (microscope glass slides and evidence tape). CTF deposition was not attempted on fingermarks deposited on porous surfaces. The fingermarks were placed in a vacuum chamber with the fingermark side facing an evaporating source boat containing either chalcogenide glass or MgF(2). Thermal evaporation of chalcogenide glass or MgF(2) under a 1 μTorr vacuum for 30 min formed dense CTFs on fingermark ridges, capturing the topographical features. The results show that it is possible to capture fingermark topology using CTFs on selected untreated, vacuumed cyanoacrylate-fumed or black powder-dusted nonporous surfaces. Additionally, the results suggested this might be a mechanism to help elucidate the sequence of deposition.     

The Recovery of Latent Fingermarks from Evidence Exposed to Ionizing Radiation*

Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

Application of mesocellular siliceous foams (MCF) for surface-assisted laser desorption ionization mass spectrometry (SALDI-MS) Analysis of fingermarks

Recent advances in nanotechnology applied in forensic sciences have contributed to consider new approaches including chemical evaluation of latent fingermarks. Significant improvement to the detection of small organic molecules has been reached with matrix-free methods associated to laser desorption/ionization mass spectrometry. The present study investigated the application of mesocellular siliceous foam (MCF) as an ionizing agent for laser desorption/ionization (LDI-MS) analysis of fingermarks as a proof of concept research. Fingermarks from three different donors were deposited directly onto a MALDI target plate and α-CHCA matrix solution, MCF ethanolic suspension or MCF/magnetic powder mixture were used for treatment. Microscopy characterization of MCF support showed particles with irregular morphology and variable sizes, and a unordered porous surface with pores diameter ranging from about 10 to 20?nm. Results showed less intense peaks in the spectra produced by the MCF support (control). Analysis of fingermarks showed ions related to endogenous and exogenous molecular components, including possible lipids from human sebum and quaternary ammonium cations commonly present in cosmetics. Promising and reproducible results were obtained for the fingermarks dusted with the MCF/magnetic powder mixture. Considering the forensic applications of nanomaterials for the analysis of small molecules in biological samples by matrix-free LDI techniques, the advantages of silica based materials should be further investigated.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

Thermal development of latent fingermarks on porous surfaces—Further observations and refinements

In a further study of the thermal development of fingermarks on paper and similar surfaces, it is demonstrated that direct contact heating of the substrate using coated or ceramic surfaces at temperatures in excess of 230 °C produces results superior to those obtained using hot air. Fingermarks can also be developed in this way on other cellulose-based substrates such as wood and cotton fabric, though ridge detail is difficult to obtain in the latter case. Fluorescence spectroscopy indicates that the phenomena observed during the thermal development of fingermarks can be reproduced simply by heating untreated white copy paper or filter paper, or these papers treated with solutions of sodium chloride or alanine. There is no evidence to suggest that the observed fluorescence of fingermarks heated on paper is due to a reaction of fingermark constituents on or with the paper. Instead, we maintain that the ridge contrast observed first as fluorescence, and later as brown charring, is simply an acceleration of the thermal degradation of the paper. Thermal degradation of cellulose, a major constituent of paper and wood, is known to give rise to a fluorescent product if sufficient oxygen is available [1], [2], [3], [4], [5]. However, the absence of atmospheric oxygen has only a slight effect on the thermal development of fingermarks, indicating that there is sufficient oxygen already present in paper to allow the formation of the fluorescent and charred products. In a depletion study comparing thermal development of fingermarks on paper with development using ninhydrin, the thermal technique was found to be as sensitive as ninhydrin for six out of seven donors. When thermal development was used in sequence with ninhydrin and DFO, it was found that only fingermarks that had been developed to the fluorescent stage (a few seconds of heating) could subsequently be developed with the other reagents. In the reverse sequence, no useful further development was noted for fingermarks that were treated thermally after having been developed with ninhydrin or DFO. Aged fingermarks, including marks from 1-year-old university examination papers were successfully developed using the thermal technique.     

An efficient strategy to detect latent fingermarks on metallic surfaces

The aim of this work is to use metal sputtering for the development of latent fingermarks on metallic surfaces by taking advantage of the prints' topography. In order to promote the preferential deposition onto fingerprints' ridges the deposition parameters should be optimized. After a previous selection, copper and gold thin films were deposited by magnetron sputtering onto stainless steel substrates where fingermarks were intentionally placed. After optimizing the deposition parameters, the influence of the fingermarks' age was studied. The quality of the developed fingermarks was evaluated visually and through optical and scanning electron microscopy. The morphology of the copper and gold thin films was examined by high resolution scanning electron microscopy. The preferential magnetron sputtering deposition of copper and gold thin films, 20-30 nm thick, allows latent fingermarks to be successfully developed. The gold films are more promising, especially for detecting non-fresh fingermarks and for conserving the developed marks. It was possible to detect the contours of the ridges and localize minutiae features in a one-month aged impression developed by gold deposition. These films present discontinuous surface and columnar cross-sections, while copper thin films have a featureless morphology.     

Fingermarks development on gloves: Relative efficiency of 1,2 Indanedione/ZnCl2, ninhydrin and wet powder

Powder suspensions such as wet powder are used to develop fingermarks on adhesive surfaces. They can also be used on gloves but these ready-to-use commercial pre-mixed solutions are not entirely satisfactory. Among other things, they generate some background noise that can sometimes be substantial and make the exploitation of the fingermarks difficult. Recent studies have proven the effectiveness of a HFE ninhydrin solution on some types of gloves. Ninhydrin and 1,2-indanedione are reagents that are commonly used for the visualisation of fingermarks on porous and semi-porous substrates. Applying them on gloves might help to overcome the issue of background noise being produced by powder suspensions. In this study, several formulations of ninhydrin and 1,2-indanedione are compared to wet powder on a sample of nitrile, latex and vinyl gloves. The subsequent results show a greater effectiveness with the use of wet powder.