The individuality of fibres used to provide forensic evidence--not all blue polyesters are the same.

Fibres used in forensic casework suffer from a disadvantage common to other forms of trace evidence--it is not possible to state with absolute certainty that they originate from a specific source. Target fibre studies, population studies and research on 'blocks of colour' have effectively demonstrated the polymorphism of textile fibres (particularly man-made ones) and have shown that when a fibre is believed to have a specific putative source, the chance that it has originated from a different source purely by coincidence is extremely remote. A study by Houck MM (Houck MM, Inter-comparison of unrelated fibre evidence. Forensic Science International 2003; 135: 146-149) has shown that no coincidental matching fibres were recovered from items of clothing examined in 20 unrelated crimes. The study involved over two million comparisons. This work goes a step further, and using the example of blue polyester fibres shows that even within a very narrow segment of the whole general fibre population, many examples of a specific colour/type of man-made fibre taken from random sources can be compared and the chance of any two being the same is very low. These studies should help to show the specificity and value of transferred fibres in providing forensic evidence.     

A study in relation to the random distribution of four fibre types on clothing (incorporating a review of previous target fibre studies).

A new target fibre study was undertaken building upon eight previous published studies, which are reviewed here. Fifty-eight items of outer clothing, obtained from households across England, were taped and searched for three types of commonly occurring fibres and one less common fibre type. The tapes were examined using a combination of automatic and manual searching. Any fibres similar to the target fibres were removed and examined using microspectrophotometry, comparison microscopy, thin layer chromatography (TLC) and fourier transform infrared spectroscopy (FTIR) where applicable. One polyester fibre, four acrylic fibres and eleven wool fibres were found that matched the three commonly occurring target fibre samples. None of the less common polyester fibres were found. One item had six matching wool fibres and another had the polyester fibre and an acrylic fibre recovered from it. The remaining eight fibres were each recovered from individual items. The results suggest that finding a large number of fibres that match a control is unlikely to happen by chance, which supports the findings of the previous target fibre studies.     

Persistence of transferred fragrance on fabrics for forensic reconstruction applications

It has recently been established that volatile organic compounds (VOCs) successfully transfer between clothing even with a short contact of 10 s, highlighting the potential to use VOCs in forensic reconstruction scenarios, such as sexual assault cases. The mid and low volatility compounds transferred in greater amounts than high volatility compounds. This study presents empirical data addressing the persistence of transferred VOCs on clothing for the first time. A series of experiments were carried out to determine the persistence of VOCs on clothing for time periods of up 4 weeks, on natural and synthetic fibres, and at three different environmental temperatures. The data indicate that the highest VOC amounts are generally obtained for shorter persistence times of up to 1 d. Whilst high volatility compounds were not recovered in sufficient amounts to allow quantification, the four other transferred VOCs were successfully quantified for persistence times of up to 4 weeks. The persistence for mid-volatility compounds follows decay curve trends in line with those previously obtained for fibres, glass and pollen. When comparing the persistence of VOCs on a natural and a synthetic fibre, for a persistence time of 1 h, the transferred VOCs were retained on a natural fibre in higher amounts than on a synthetic fibre. However, for longer persistence times the concentration of VOCs was similar between the two fabrics. Lastly, lower environmental temperatures resulted in higher recoveries for most VOCs, especially for short persistence times. These findings demonstrate that optimal recovery of VOCs from clothing occurs when the fabric is kept at cooler temperatures and analysed soon after the fragrance transfer occurred, although VOC recovery was possible at higher temperatures and after longer persistence times. Given the transfer and persistence characteristics of VOCs from fragrance, there is potential for fragrance to be used as a form of trace in forensic reconstruction approaches.     

Forensic touch DNA recovery from metal surfaces – A review

Trace evidence such as touch (also known as contact) DNA has probative value as a vital forensic investigative tool that can lead to the identification and apprehension of a criminal. While the volume of touch DNA evidence items submitted to forensic laboratories has significantly increased, recovery and amplification of DNA from these items, especially from metal surfaces, remains challenging. Currently little is understood with regards to the underlying mechanisms of metal-DNA interactions in the context of forensic science and how this may impact on DNA recovery. An increased understanding of these mechanisms would allow optimisation of methods to improve outcomes when sampling these materials. This paper reviews the basis of DNA binding to metal substrates, the merits and limitations of current methods and future perspectives of improving recovery and amplification of touch DNA from metal surfaces of forensic interest.     

The effect of tape type,taping method and tape storage temperature on the retrieval rate of fibres from various surfaces: An example of data generation and analysis to facilitate trace evidence recovery validation and optimisation

This paper aspires to assist those tasked with data generation and analysis for the purpose of the validation and/or optimisation of trace evidence recovery. It does so via a detailed report of the authors’ approach to this problem in the context of target fibre retrieval using self-adhesive tapes.Textile fibres can provide valuable evidence at both source and activity levels. This ability stems from their near ubiquity in the man-made environment, their potential for high levels of discrimination (especially when found in combination) and their reproducible transfer and persistence behaviours. To realise this value for the criminal justice system, it is vital that police forces and forensic providers are collectively able to search for, recover and analyse fibres found at crime scenes and correctly evaluate their evidential value.ISO accreditation provides quality assurance for such activities. The work reported in this paper was part of a study to validate crime scene fibre retrieval processes for the purposes of ISO17020 accreditation. However, it is hoped that it will be of assistance to those wishing to validate and/or optimise forensic fibre recovery whether at the crime scene or in the laboratory. Further, the methods described may be of value to those who need to validate and/or optimise the recovery of other types of trace evidence.This paper outlines a series of experiments that investigated the effect of four factors on the rate at which target fibres could be recovered from surfaces by tape lifting. The factors were tape type (with two levels, namely: J-LAR and Crystal Tabs), tape storage temperature (three levels: −5 °C, room temperature [19 ± 1 °C] and 35 °C), taping method (two levels: zonal and one-to-one) and surface (12 levels: each being a surface type commonly encountered at crime scenes). This resulted in 144 unique experimental conditions. For each of these, five repeat fibre recovery rate determinations were carried out, generating 720 data points. All surfaces were clean and dry prior to target fibres being transferred and recovered. In all cases, the tapes were applied to the surfaces at 19 ± 1 °C.These experiments showed that the surfaces can be divided into three stable clusters based on the median and interquartile range of the fibre retrieval rate achieved from each of them. Also, they showed that, in terms of the proportion of the target fibres retrieved, typically and setting aside interaction effects:

• •Crystal Tabs outperformed J-LAR;
• •rolls of tape stored at −5 °C and 35 °C outperformed those stored at room temperature;
• •one-to-one taping outperformed zonal taping.

However, notably, a good degree of between-condition overlap was also apparent in the data. To understand this, a four-way factorial ANOVA model was built which revealed significant and substantive effects for all four main effects and for 10 of the 11 interactions. Importantly, the four-way interaction term was amongst those found to be significant. The interplay between the effects of the four factors was analysed by means of simple effects tests and pairwise contrasts. Tables and interactive parallel coordinate plots have been created. Using these it can easily be seen which of any given pair of levels of each of the four factors resulted in the higher fibre retrieval rate under any one of the unique conditions of the study, and the effect size and statistical significance of this observation.Qualitative evaluations of the effect of tape storage temperatures on tape pliability and its propensity to tear in use were also made.     

Blocks of colour IV: the evidential value of blue and red cotton fibres.

Samples of blue and red cotton fibres were examined using light and fluorescence microscopy as well as UV/VIS microspectrophotometry and fluorescence microspectroscopy. The degree of fluorescence and spectral variation was recorded. Particular attention was paid to the recurrence of certain spectral patterns. The importance of spectral information in the UV range is emphasized again. Colour plays a critical role in the comparison of cotton fibres in forensic sciences. Normally, fibres producing spectral patterns that are frequently seen will tend to have a lower evidential value in criminal cases as the choice of putative sources is theoretically greater and vice versa. Besides black cotton, blue and red cotton fibres are very frequent in fibre casework. The very high discriminating power using a combination of light microscopy, fluorescence microscopy and UV/VIS microspectrophotometry shows that even blue and red cotton fibres can provide excellent evidence when involved in fibre transfer cases.     

Further insights into the persistence of transferred fibres on outdoor clothes.

This study was conducted to assess persistence of fibres on items of outdoor clothes in normal wear situations. The persistence of acrylic and wool fibres transferred on 23 recipient garments was examined in relation to: time of wear; features of the recipient garment (fibre composition, surface structure and texture); conditions of wear (public transport used or not), and; their location on the recipient. After 8 hours of wear more than 75% of transferred fibres were lost during 8-10 hours of wear. After 16 hours of wear no more than 10%, most often up to 5%, of fibres remained. Fibres were lost at higher rate when public transport was used. The persistence of fibres depended more on the surface structure and texture of the recipient garment and the location of donor fibres rather than on the type of fibre.     

The analysis and comparison of blue wool fibre populations found at random on clothing.

Fifty-eight garments were taped and searched for mid to dark blue wool fibres. These were then removed from the tapings, mounted on slides and examined using a high-power microscope (400x). A total of 2,740 blue wool fibres were identified and visible range microspectrophotometry (MSP) was performed on them. Three hundred independent blue wool populations were identified on 56 of the 58 garments searched. The lack of control fibres meant the spectral range of each population was unknown. The number of populations may have been underestimated by grouping together the fibres that had broad single peaks and a lack of distinguishing features in the spectra. Although blue wool is considered to be a common fibre type, 300 unique spectral shapes were identified by the use of microspectrophotometry alone. This demonstrates that the dyes used in the dyeing of blue wool are variable. Showing that many different populations of blue wool occur on a range of garments should ensure that the forensic scientist does not underestimate or understate the strength of evidence in cases where blue wool is found. Hopefully this work will enlighten scientists and enable them to also assess the true value of their findings when other commonly occurring fibres are encountered.     

The kinetics of colour change in textiles and fibres treated with detergent solutions: Part II — Spectrophotometric measurements

The aim of this study was to assess colour variations that occur in several types of textiles and their constituent fibres, resulting from the long-term influence of various laundry detergents. A 14-day experiment was conducted using blue, red and grey/black cotton, wool, acrylic and polyester textiles. The spectrophotometric measurement of colour changes in fabric samples and test solutions, as well as the microspectrophotometric analysis of colour changes in single fibres were described. An evaluation of the observed colour changes from a forensic fibre analysis expert's point of view, as well as that of an average user/consumer of the textiles and laundry detergents is also provided.     

Gamma Irradiation as a Biological Decontaminant and Its Effect on Common Fingermark Detection Techniques and DNA Profiling

Abstract:  The use of disease-causing organisms and their toxins against the civilian population has defined bioterrorism and opened forensic science up to the challenges of processing contaminated evidence. This study sought to determine the use of gamma irradiation as an effective biological decontaminant and its effect on the recovery of latent fingermarks from both porous and nonporous items. Test items were contaminated with viable spores marked with latent prints and then decontaminated using a cobalt 60 gamma irradiator. Fingermark detection was the focus with standard methods including 1,2-indanedione, ninhydrin, diazafluoren-9-one, and physical developer used during this study. DNA recovery using 20% Chelex extraction and quantitative real-time polymerase chain reaction was also explored. Gamma irradiation proved effective as a bacterial decontaminant with D -values ranging from 458 to 500 Gy for nonporous items and 797–808 Gy for porous ones. The results demonstrated the successful recovery of latent marks and DNA establishing gamma irradiation as a viable decontamination option.     

An investigation into the persistence of textile fibres on buried carcasses

A significant amount of research has been carried out on fibres to aid the forensic scientist in determining the significance of these when found on a victim or suspect. This work has focused on open-air environments, and as such no research has been undertaken to examine the persistence of fibres on bodies in the burial environment.Wool and cotton fibres, known to fluoresce under ultraviolet (UV) light, were transferred onto the skin of four porcine (Sus scrofa) carcasses (two carcasses per fibre type). The number of fibres transferred was recorded from images taken under UV light. The remains were subsequently placed in four burial sites and left interred for 14 days. After this period the carcasses were excavated and lightly brushed down to remove the soil layer that had adhered to the skin. Once again photography under UV light was used to record the number of fibres which persisted on the skin.Results showed that after 14 days, wool and cotton fibres remain on the surface of the buried carcasses. In no circumstance was there a total loss of fibres suggesting that in such scenarios, the likelihood of finding fibres is high but the initial number of fibres transferred would be strongly diminished. This has important implications for both the excavation protocol for buried remains and the subsequent analysis for physical evidence.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

A further study of dye batch variation in textile and carpet fibres.

Four sets of acrylic fibre samples were obtained from a company that dyes fabrics for the fashion industry. Between seven and ten different batches of fibres constituted each set. Comparison microscopy, visible and UV range microspectrophotometry and thin layer chromatography (TLC) were used to compare the dyes on each batch of fibres within the sets. Only one of the four sets exhibited variation within the batches. The differences were seen when both microscopical and analytical techniques were used. In addition, two further sets of samples had been obtained from a company that produces carpets for the car industry. The first set consisted of 26 batches of acid dyed orange nylon fibres. The second consisted of 21 batches of acid dyed mustard coloured nylon and direct dyed brown viscose fibres blended together. When the first set was viewed under UV light one batch had more pale orange fibres present and they fluoresced more brightly than the other fibres. This could be due to the blending with a different dye batch of fibre or due to poor dye uptake--the latter being more likely. When tested using visible and UV range microspectrophotometry and TLC, further dye batch variation was not detected. The second set was examined after separating the nylon and viscose fibres from each other. The nylon fibres were indistinguishable when a range of microscopical and analytical techniques were employed; however, the viscose fibres showed dye batch variation when TLC was used.     

A computerized data base of mail order garments – a contribution toward estimating the frequency of fibre types found in clothing: Part 3: The content of the data bank – is it representative?

In Part 3 of this series the authors have tried to evaluate the representativity of the Catalogue Data Base. At present this is only possible by comparing the fibre percentages obtained with figures from World Textile Production, with those of a more regional character, with existing data from alternative collections and with that from other enquiries. It is apparent that a true test for the representativity of the Catalogue Data Base is not possible. Figures which would be directly comparable do not exist. Nevertheless, it is possible to show that the most common fibre types and colours and their rank orders are the same in the different collections and production figures. The forensic value of common fibres when they appear in certain garments or combinations is presented and also the value of fibres which rarely appear in the CDB. The authors give an outlook on further activities to validate the data in the Catalogue Data Base and discuss the combination of the CDB data with that from alternative collections. Theoretical examples are presented.     

Extraction of the relevant population from a forensic database

Evaluation of forensic evidence using Bayesian statistics requires the formulation of hypotheses. Many hypotheses, especially those presenting the defence viewpoint imply that traces can be attributed to an arbitrary member of a relevant population. The exact items or persons that comprise the relevant population may vary from case to case. Therefore, the statistical evaluation of evidential value based on databases cannot make use of a fixed set of items or persons. In the current paper, methodology is presented to filter the contents of a database such that only items that are considered relevant are selected. Six scenarios, including those related to fibre, textile, and glass evidence are described, together with the hypotheses and relevant populations that may be evaluated by an expert. In addition, we show how items representing the defined relevant population can be extracted from a database using SQL code. Images of the items in the (filtered) relevant population provide an overview of the selected items and hence direct feedback to the examiner. In this way, erroneous codes or unwanted side effects can be identified and corrected. It is concluded that the filtering procedure is effective in cases where the relevant population is demarcated accurately.     

The use of linear dichroism in forensic fibre examinations — Part 6. Validation and practical aspects of MSP-PPL

This paper summarizes the results of previous work on the microscopic observation of linear dichroism found in dyed fibres (polyesters, polyamides, wool, silk, cotton, viscose, acrylics and acetates) and in pigmented fibres as well as the measurements on these fibre classes using microspectrophotometry with plane polarized light (MSP-PPL). The validation of this method is discussed and a practical tool is proposed for comparing fibre traces with control fibres. The limitations and strengths of this method are also revised.     

The use of melting point and refractive index determination to compare colourless polyester fibres

The incidence of polyesters encountered in forensic fibre examinations continues to increase. To meet different consumer needs such fibres can be subjected to many physical and chemical variations during production. Some of these variations are discussed. Accurate comparison of these fibres presents a particular problem to the forensic scientist. Melting point and refractive index determinations were made on various samples of colourless polyesters provided by different manufacturers to assess the comparative value of such information and to find out the possibility of relating it to modifications of the basic polymer. Melting points alone were found to be of little comparative value, but determination of both refractive indices n_∥ and n_⊥ does allow discrimination between samples. Consideration of both melting point and refractive index together may help to provide an insight into polymer variation, though this remains somewhat speculative.     

The recovery of latent fingermarks and DNA using a silicone-based casting material

There are many techniques available for the recovery of fingermarks at scenes of crime including the possibility of taking casts of the marks. Casts can be advantageous in cases where other destructive recovery techniques might not be suitable, such as when recovering finger marks deposited on valued or immobile items. In this research, Isomark (a silicone-based casting material) was used to recover casts of finger marks placed on a variety of substrates. Casts were enhanced using cyanoacrylate fuming. Good quality marks were successfully recovered from a range of smooth, non-porous surfaces. Recovery from semi-porous surfaces was shown to be inefficient. DNA was subsequently extracted from the casts using QIAamp Mini extraction kits, amplified and profiled. Full DNA profiles were obtained 34% of samples extracted.     

The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.