Personal Identification by Morphometric Analyses of Intra‐Oral Radiographs of Unrestored Teeth*

Abstract: The aim of this study was to work out a biometric method for personal identification by comparing simulated antemortem and postmortem digital radiographs of unrestored teeth. Intra‐oral radiographs of the inferior right first molar, without restorations, were acquired at two different times in 70 subjects using a standardized technique followed by a morphometric analysis. The program automatically supplied values of the absolute distances, relative distances, shape factors, moments, perimeter values, and the areas of the triangles, which were obtained by joining key reference points. The values for the homologous samples were compared with the heterologous samples. Statistical analysis was then carried out, resulting in a section point value of 0.9992. Higher correlation coefficients indicate positive identification, with less than 2% risk of false positives, and approximately 3% of false negatives. We have also tested the method on dental records from 30 patients in order to demonstrate the specificity and sensitivity of the system.     

Comparative Assessment of a Novel Photo‐Anthropometric Landmark‐Positioning Approach for the Analysis of Facial Structures on Two‐Dimensional Images

Positioning landmarks in facial photo‐anthropometry (FPA) applications remains today a highly variable procedure, as traditional cephalometric definitions are used as guidelines. Herein, a novel landmark‐positioning approach, specifically adapted for FPA applications, is introduced and, in particular, assessed against the conventional cephalometric definitions for the analysis of 16 landmarks on ten frontal images by two groups of examiners (with and without professional knowledge of anatomy). Results showed that positioning reproducibility was significantly better using the novel method. Indeed, in contrast to the classic approach, very low landmark dispersions were observed for both groups of examiners, which were usually below the strictest clinical standards (i.e., 0.575 mm). Furthermore, the comparison between the two groups of examiners highlighted higher dispersion consistencies, which supported a higher robustness. Thus, the use of an adapted landmark‐positioning approach proved to be highly advantageous in FPA analysis and future work in this field should consider adopting similar methodologies.     

Sex Determination from the Frontal Bone: A Geometric Morphometric Study

Sex estimation in human skeletal remains when using the cranium through traditional methods is a fundamental pillar in human identification; however, it may be possible to incur in a margin of error due because of the state of preservation in incomplete or fragmented remains. The aim of this investigation was sex estimation through the geometric morphometric analysis of the frontal bone. The sample employed 60 lateral radiographs of adult subjects of both sexes (30 males and 30 females), aged between 18 and 40 years, with mean age for males of 28 ± 4 and 30 ± 6 years for females. Thin‐plate splines evidenced strong expansion of the glabellar region in males and contraction in females. No significant differences were found between sexes with respect to size. The findings suggest differences in shape and size in the glabellar region, besides reaffirming the use of geometric morphometrics as a quantitative method in sex estimation.     

Root Morphology and Anatomical Patterns in Forensic Dental Identification: A Comparison of Computer‐Aided Identification with Traditional Forensic Dental Identification*

Abstract: An online forensic dental identification exercise was conducted involving 24 antemortem–postmortem (AM–PM) dental radiograph pairs from actual forensic identification cases. Images had been digitally cropped to remove coronal tooth structure and dental restorations. Volunteer forensic odontologists were passively recruited to compare the AM–PM dental radiographs online and conclude identification status using the guidelines for identification from the American Board of Forensic Odontology. The mean accuracy rate for identification was 86.0% (standard deviation 9.2%). The same radiograph pairs were compared using a digital imaging software algorithm, which generated a normalized coefficient of similarity for each pair. Twenty of the radiograph pairs generated a mean accuracy of 85.0%. Four of the pairs could not be used to generate a coefficient of similarity. Receiver operator curve and area under the curve statistical analysis confirmed good discrimination abilities of both methods (online exercise = 0.978; UT‐ID index = 0.923) and Spearman’s rank correlation coefficient analysis (0.683) indicated good correlation between the results of both methods. Computer‐aided dental identification allows for an objective comparison of AM–PM radiographs and can be a useful tool to support a forensic dental identification conclusion.     

Source Camera Identification for Heavily JPEG Compressed Low Resolution Still Images*

Abstract: In this research, we examined whether fixed pattern noise or more specifically Photo Response Non‐Uniformity (PRNU) can be used to identify the source camera of heavily JPEG compressed digital photographs of resolution 640 × 480 pixels. We extracted PRNU patterns from both reference and questioned images using a two‐dimensional Gaussian filter and compared these patterns by calculating the correlation coefficient between them. Both the closed and open‐set problems were addressed, leading the problems in the closed set to high accuracies for 83% for single images and 100% for around 20 simultaneously identified questioned images. The correct source camera was chosen from a set of 38 cameras of four different types. For the open‐set problem, decision levels were obtained for several numbers of simultaneously identified questioned images. The corresponding false rejection rates were unsatisfactory for single images but improved for simultaneous identification of multiple images.     

Computer‐aided Dental Identification: An Objective Method for Assessment of Radiographic Image Similarity*

Abstract: A pilot study evaluated a computer‐based method for comparing digital dental images, utilizing a registration algorithm to correct for variations in projection geometry between images prior to a subtraction analysis. A numerical assessment of similarity was generated for pairs of images. Using well‐controlled laboratory settings, the method was evaluated as to its ability to identify the correct specimen with positive results. A subsequent clinical study examined longitudinal radiographic examinations of selected anatomical areas on 47 patients, analyzing the computer‐based method in making the correct identification based upon a threshold level of similarity. The results showed that at a threshold of 0.855, there were two false negative and two false positive identifications out of 957 analyses. Based on these initial findings, 25 dental records having two sets of full mouth series of radiographs were selected. The radiographs were digitized and grouped into six anatomical regions. The more recent set of films served as postmortem images. Each postmortem image was analyzed against all other images within the region. Images were registered to correct for differences in projection geometry prior to analysis. An area of interest was selected to assess image similarity. Analysis of variance was used to determine that there was a significant difference between images from the same individual and those from different individuals. Results showed that the threshold level of concordance will vary with the anatomical region of the mouth examined. This method may provide the most objective and reliable method for postmortem dental identification using intra‐oral images.     

A Geometric Morphometric Approach to Sex Determination of the Human Adult Os Coxa

Abstract: Sex determination of the human skeleton is best assessed from the os coxa. The present study explored the possibility of using three‐dimensional landmark coordinate data collected from various landmarks located over the entire bone to determine whether there were significant sex differences local to the landmarks. Thirty‐six landmarks were digitized on 200 African American and European American male and female adult human os coxae. MANCOVA results show that sex and size have a significant effect on shape for both European Americans (Sex, F = 17.50, d.f. = 36, 63, p > F = 0.0001; Size, F = 2.56, d.f. = 36, 63, p > F = 0.0022) and African Americans (Sex, F = 21.18, d.f. = 36, 63, p > F = 0.0001; Size, F = 2.59, d.f. = 36, 63, p > F = 0.0005). The discriminant analysis shows that sexing accuracy for European Americans is 98% for both males and females, 98% for African American females, and 100% for African American males.     

Speech Watermarking: An Approach for the Forensic Analysis of Digital Telephonic Recordings*

Abstract: In this article, the authors discuss the problem of forensic authentication of digital audio recordings. Although forensic audio has been addressed in several articles, the existing approaches are focused on analog magnetic recordings, which are less prevalent because of the large amount of digital recorders available on the market (optical, solid state, hard disks, etc.). An approach based on digital signal processing that consists of spread spectrum techniques for speech watermarking is presented. This approach presents the advantage that the authentication is based on the signal itself rather than the recording format. Thus, it is valid for usual recording devices in police‐controlled telephone intercepts. In addition, our proposal allows for the introduction of relevant information such as the recording date and time and all the relevant data (this is not always possible with classical systems). Our experimental results reveal that the speech watermarking procedure does not interfere in a significant way with the posterior forensic speaker identification.     

A Novel Approach to the Examination of Soil Evidence: Mineral Identification Using Infrared Microprobe Analysis*

Abstract: Identification of minerals using the infrared microprobe with a diamond internal reflection objective is a rapid and reliable method for forensic soil examinations. Ninety‐six mineral varieties were analyzed, and 77 were differentiated by their attenuated total reflection (ATR) spectra. Mineral grains may be mounted in oil for conventional polarized light microscope characterization and their ATR spectrum obtained with little or no interference by the liquid. This infrared microprobe method can be used to identify silicates, phosphates, nitrates, carbonates, and other covalent minerals; however, ionic minerals, metal oxide and sulfide minerals, and minerals with refractive indexes greater than diamond do not produce identifiable spectra, but the lack of a spectrum or one with high absorbance values does provide useful information. This research demonstrates the overall utility that infrared microprobe analysis brings mineral identification in soil evidence.     

GrinLine Identification Using Digital Imaging and Adobe Photoshop*

Abstract: The purpose of this study was to outline a method by which an antemortem photograph of a victim can be critically compared with a postmortem photograph in an effort to facilitate the identification process. Ten subjects, between 27 and 55 years old provided historical pictures of themselves exhibiting a broad smile showing anterior teeth to some extent (a grin). These photos were termed “antemortem” for the purpose of the study. A digital camera was used to take a current photo of each subject’s grin. These photos represented the “postmortem” images. A single subject’s “postmortem” photo set was randomly selected to be the “unknown victim.” These combined data of the unknown and the 10 antemortem subjects were digitally stored and, using Adobe Photoshop software, the images were sized and oriented for comparative analysis. The goal was to devise a technique that could facilitate the accurate determination of which “antemortem” subject was the “unknown.” The generation of antemortem digital overlays of the teeth visible in a grin and the comparison of those overlays to the images of the postmortem dentition is the foundation of the technique. The comparisons made using the GrinLine Identification Technique may assist medical examiners and coroners in making identifications or exclusions.     

Personal Identification Using the Frontal Sinus*

Abstract: The frontal sinuses are known to be unique to each individual; however, no one has tested the independence of the frontal sinus traits to see if probability analysis through trait combination is a viable method of identifying an individual using the frontal sinuses. This research examines the feasibility of probability trait combination, based on criteria recommended in the literature, and examines two other methods of identification using the frontal sinuses: discrete trait combinations and superimposition pattern matching. This research finds that most sinus traits are dependent upon one another and thus cannot be used in probability combinations. When looking at traits that are independent, this research finds that metric methods are too fraught with potential errors to be useful. Discrete trait combinations do not have a high enough discriminating power to be useful. Only superimposition pattern matching is an effective method of identifying an individual using the frontal sinuses.     

A New Digital Method for the Objective Comparison of Frontal Sinuses for Identification*

Abstract: Use of the frontal sinuses for identification requires an objective method of comparison to meet Daubert standards. Christensen’s application of Elliptical Fourier Analysis and Likelihood Ratios seems to be a viable solution for this problem. The proposed method draws upon this work and attempts to simplify its application. Variation between pairs of digitized sinus tracings was quantified by summing the difference between corresponding measurements taken from a fixed origin to the outer edge of the sinus outlines using Adobe Photoshop^® CS2. Same‐skull and different‐skull pairs were used to develop reference distributions from which the probability of unknown pairs coming from the same or a different individual was estimated. Error rates of 0% were achieved. Resulting correlation coefficients demonstrated inter‐rater and test–retest reliability. Further refinement of the reference distributions and more rigorous testing of error rates should make this technique applicable to casework.     

Ancestry Estimation in Forensic Anthropology: Geometric Morphometric versus Standard and Nonstandard Interlandmark Distances

Standard cranial measurements are commonly used for ancestry estimation; however, 3D digitizers have made cranial landmark data collection and geometric morphometric (GM) analyses more popular within forensic anthropology. Yet there has been little focus on which data type works best. The goal of the present research is to test the discrimination ability of standard and nonstandard craniometric measurements and data derived from GM analysis. A total of 31 cranial landmarks were used to generate 465 interlandmark distances, including a subset of 20 commonly used measurements, and to generate principal component scores from procrustes coordinates. All were subjected to discriminant function analysis to ascertain which type of data performed best for ancestry estimation of American Black and White and Hispanic males and females. The nonstandard interlandmark distances generated the highest classification rates for females (90.5%) and males (88.2%). Using nonstandard interlandmark distances over more commonly used measurements leads to better ancestry estimates for our current population structure.     

Sexual Dimorphism of the Fetal Ilium: A 3D Geometric Morphometric Approach with Multislice Computed Tomography

Adult sexual dimorphism is well established. However, data regarding fetuses are sparse with contradictory results. Our study aimed to look for fetal sexual dimorphism. Multislice computed tomography (MSCT) examinations and three‐dimensional (3D) reconstructions were recorded on 93 fetal iliac bones aged between 21 and 40 weeks of amenorrhea (WA). The collection was divided into two age groups, with a cutoff at 30 WA. The 3D geometric morphometric analysis was based on outline analysis. We used elliptic Fourier analysis (EFA) because of the difficulty of landmark positioning. Step‐by‐step reconstructions allowed a better comprehension of the fine shape details. Principal component analysis (PCA) and linear discriminant analysis (LDA) were performed on the two age groups. Results did not show any difference between male and female shapes, in both age groups. We demonstrate the feasibility of outline analysis for immature shapes, but sexual dimorphism has not been established in our collection.     

Identification of the Edentulous Individual: An Investigation into the Accuracy of Radiographic Identifications*

Abstract: The dental identification of edentulous individuals can be challenging based on the lack of antemortem materials and unique features visible on radiographs. The constant resorption of the alveolar ridges further complicates the process. The purpose of this study was to quantify the error rate and reliability of dental identifications based on a comparison of synthesized antemortem and postmortem radiographs of edentulous individuals. Ten observers examined ten cases on two occasions and reported dichotomous and conclusion level decisions. These were analyzed using Kappa and Receiver Operator Characteristics. The mean area under the curve was 0.75 and the mean sensitivity was 0.57 and specificity was 0.83. These results suggest that dental identifications of edentulous individuals using radiographs alone have a high error rate and should be dual reported. These data add further weight to the argument that all dental prostheses should be labeled.     

An Assessment of How Facial Mimicry Can Change Facial Morphology: Implications for Identification

The assessment of facial mimicry is important in forensic anthropology; in addition, the application of modern 3D image acquisition systems may help for the analysis of facial surfaces. This study aimed at exposing a novel method for comparing 3D profiles in different facial expressions. Ten male adults, aged between 30 and 40 years, underwent acquisitions by stereophotogrammetry (VECTRA‐3D ^® ) with different expressions (neutral, happy, sad, angry, surprised). The acquisition of each individual was then superimposed on the neutral one according to nine landmarks, and the root mean square (RMS) value between the two expressions was calculated. The highest difference in comparison with the neutral standard was shown by the happy expression (RMS 4.11 mm), followed by the surprised (RMS 2.74 mm), sad (RMS 1.3 mm), and angry ones (RMS 1.21 mm). This pilot study shows that the 3D–3D superimposition may provide reliable results concerning facial alteration due to mimicry.     

A Grass Molecular Identification System for Forensic Botany: A Critical Evaluation of the Strengths and Limitations*

Abstract: Plant material is frequently encountered in criminal investigations but often overlooked as potential evidence. We designed a DNA‐based molecular identification system for 100 Australian grasses that consisted of a series of polymerase chain reaction assays that enabled the progressive identification of grasses to different taxonomic levels. The identification system was based on DNA sequence variation at four chloroplast and two mitochondrial loci. Seventeen informative indels and 68 single‐nucleotide polymorphisms were utilized as molecular markers for subfamily to species‐level identification. To identify an unknown sample to subfamily level required a minimum of four markers or nine markers for species identification. The accuracy of the system was confirmed by blind tests. We have demonstrated “proof of concept” of a molecular identification system for trace botanical samples. Our evaluation suggests that the adoption of a system that combines this approach with DNA sequencing could assist the morphological identification of grasses found as forensic evidence.     

Fingering a Murderer: A Successful Anthropological and Radiological Collaboration*

Abstract: We illustrate an interdisciplinary approach to identify a victim in a case with complex taphonomic and procedural issues. Burning, fragmentation, species commingling, and examination by multiple experts required anthropological preparation and analysis combined with radiographic adaptations to image and match trabecular patterns in unusually small, burned specimens. A missing person was last seen in the company of a reclusive female on a remote rural property. A warranted search found several burn sites containing human and animal bones. Fragment preparation, analysis, and development of a biological profile by anthropologists enabled examination by the odontologist, molecular biologist, and radiologist, and justified use of antemortem radiographs from one potential victim. Visual and radiological comparison resulted in a positive (later confirmed) identification of the victim by radiological matches of three carpal phalanges. Although some dimensional changes are expected with burning, morphological details were preserved, aided by selection of relatively intact, small bones for comparison.     

Police Occupational Culture: Testing the Monolithic Model*

Since foundational work in the 1950s, researchers have described a variety of dimensions of the occupational culture of police. In an effort to integrate the disparate works, a theoretical model has been constructed depicting the ways in which the stressful features of the police work environment produce coping mechanisms and outcomes. While this model usefully organizes the vast literature on police culture, it has yet to be empirically tested. The current study addresses this void. Path analyses of officer survey data reveal support for several of the propositions set forth by the monolithic model, although the magnitude of the statistical associations was not very powerful and overall model fit was marginal. The implications of these findings are especially relevant given recent concerns over police-community relations and the renewed interest in the police occupational culture expressed by the President’s Task Force on 21st Century Policing.