Fingerprint pattern restoration by digital image processing techniques

Fingerprint evidence plays an important role in solving criminal problems. However, defective (lacking information needed for completeness) or contaminated (undesirable information included) fingerprint patterns make identifying and recognizing processes difficult. Unfortunately. this is the usual case. In the recognizing process (enhancement of patterns, or elimination of "false alarms" so that a fingerprint pattern can be searched in the Automated Fingerprint Identification System (AFIS)), chemical and physical techniques have been proposed to improve pattern legibility. In the identifying process, a fingerprint examiner can enhance contaminated (but not defective) fingerprint patterns under guidelines provided by the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group on Imaging Technology (SWGIT), and an AFIS working group within the National Institute of Justice. Recently, the image processing techniques have been successfully applied in forensic science. For example, we have applied image enhancement methods to improve the legibility of digital images such as fingerprints and vehicle plate numbers. In this paper, we propose a novel digital image restoration technique based on the AM (amplitude modulation)-FM (frequency modulation) reaction-diffusion method to restore defective or contaminated fingerprint patterns. This method shows its potential application to fingerprint pattern enhancement in the recognizing process (but not for the identifying process). Synthetic and real images are used to show the capability of the proposed method. The results of enhancing fingerprint patterns by the manual process and our method are evaluated and compared.     

Comparative study of electrochromic enhancement of latent fingerprints with existing development techniques

To address the challenge of capturing latent fingerprint evidence from metal surfaces, a new method of latent fingerprint enhancement based on electrochromic polymer films has recently been developed. Here, we present a study comparing the development and visualization of nonvisible fingerprints on stainless steel substrates using this electrochromic enhancement approach with three classical methods (dusting, wet powder, and cyanoacrylate fuming). Two variants of the electrochromic enhancement method were utilized with polyaniline and poly(3,4-ethylenedioxythiophene) as the electrochromic materials. Fingerprint samples were taken from different donors (varying in age and gender) and were exposed to different environments for systematically varied periods of time (up to 28 days). The environments represent plausible evidential scenarios: left under ambient conditions, washed with aqueous soap solution, washed with acetone, submerged in water, and maintained at elevated temperature. The electrochromic enhancement procedure frequently outperformed the traditional methods, particularly for samples exposed to more challenging histories.     

Latent Fingerprint Development on Thermal Paper Using Traditional Ninhydrin and 1,2‐indanedione

Thermal paper poses a significant challenge to latent print development as it tends to change color when traditional fingerprint development formulations are applied to it. In this study, the optimal components of ninhydrin, 1,2‐indanedione, 1,8‐diazafluoren‐9‐one (DFO), and 5‐methylthioninhydrin (5‐MTN) for yielding clear fingerprints on thermal paper were determined by systematically adjusting the relative amounts of the reagents, polar solvents, and the nonpolar diluent petroleum ether, followed by validation on text‐printed thermal paper. Specifically, 3.0% ethyl acetate as the polar solvent in petroleum ether was found to be the optimal combination; the optimal dilution ratios of ninhydrin, DFO, and 5‐MTN original solutions with petroleum ether were 1 to 2, 11, and 7, respectively. The optimal concentration of 1,2‐indanedione in petroleum ether was 0.125 g/L, with a string of 0.5% ethyl acetate in petroleum ether.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

The Influence of Selected Fingerprint Enhancement Techniques on Forensic DNA Typing of Epithelial Cells Deposited on Porous Surfaces

Fingerprints deposited at crime scene can be a source of DNA. Previous reports on the effects of fingerprint enhancement methods have focused mainly on fingermarks deposited in blood or saliva. Here, we evaluate the effects of fingerprint enhancement methods on fingerprints deposited on porous surfaces. We performed real‐time quantification and STR typing, the results of which indicated that two methods (iodine fuming and 1,2‐indanedione in ethyl acetate enhancement) had no effect on the quantity of DNA isolated and resultant STR alleles when compared to control samples. DNA quantities and allele numbers were lower for samples enhanced with silver nitrate and 1,2‐indanedione in acetic acid when compared to control samples. Based on DNA quantity, quality, and observable stochastic effects, our data indicated that iodine fuming and 1,2‐indanedione in ethyl acetate were the preferred options for the enhancement of fingerprints on porous surfaces.     

Determining the order of deposition of natural latent fingerprints and laser printed ink using chemical mapping with secondary ion mass spectrometry

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) chemical mapping was used to investigate the order of deposition of natural latent fingerprints and laser printed ink on paper. This feasibility study shows that sodium, potassium and C₃H₅ positive ions were particularly abundant endogenous components of the natural fingerprints and also present in the paper examined, but were mostly absent in the laser printed ink. Mapping of these ions enables the observation of friction ridges from latent prints on the ink surface, only when a fingerprint was deposited above the layer of ink. As a demonstration of proof of concept, blind testing of 21 samples from three donors resulted in a 100% success rate. The sensitivity of this technique was investigated within this trial through the examination of up to fifth depletion fingerprints and ageing of up to 28 days. Migration of fingerprint and paper components to the ink surface, although observed with increased ageing time, was not found to compromise determination of the deposition sequence.     

The application of infrared chemical imaging to the detection and enhancement of latent fingerprints: method optimization and further findings

Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.     

A rapid gas chromatographic method for the fingerprinting of illicit cocaine samples.

A gas chromatographic (GC) fingerprint method, based on the presence or absence of six congeners, was developed for illicit cocaine samples. The fingerprint utilizes the relative abundances of these congeners towards each other, disregarding cocaine as the main constituent, and can be expressed numerically or graphically in the form of pictograms for rapid visual comparison. The method can be applied directly to a solution of the sample in chloroform, without previous workup procedures. More than 70 unrelated samples were analyzed and a great variation was observed in the parameter composition. On the other hand, a remarkable similarity could be seen between related samples. The GC fingerprint method may be considered an important contribution for sample comparison, as is exemplified by a subdivision of the analyzed samples in different categories, based on the number and types of congeners found.     

Systematic study on STR profiling on blood and saliva traces after visualization of fingerprint marks

This paper describes a systematic study of the influence of optical, physical, and chemical methods used for fingerprint enhancement on subsequent DNA analysis of biological stains. Latent fingerprints as well as fingerprints in contact with blood and saliva on different surfaces were treated with dactyloscopic methods. As a general finding, subsequent STR profiling of the blood/saliva traces led to good results after all the enhancement methods included in this study. Concerning blood enhancement procedures, the airbrush technique showed deleterious effects on subsequent STR analysis in some cases. We therefore recommend the implementation of the layer technique, as it brings advantages for fingerprint enhancement as well. It could also be shown that, as can be necessary in practical casework, two enhancement methods can be performed on a single stain without having influence on STR profiling. In terms of methodological variety, this paper reflects a comprehensive study performed on STR profiling after fingerprint enhancement methods, including rare methods and variations of techniques, which can be a useful alternative in certain case scenarios.     

The Use of Liquid Latex for Soot Removal from Fire Scenes and Attempted Fingerprint Development with Ninhydrin*

Abstract: Throughout the United States, clearance rates for arson cases remain low due to fire’s destructive nature, subsequent suppression, and a misconception by investigators that no forensic evidence remains. Recent research shows that fire scenes can yield fingerprints if soot layers are removed prior to using available fingerprinting processes. An experiment applying liquid latex to sooted surfaces was conducted to assess its potential to remove soot and yield fingerprints after the dried latex was peeled. Latent fingerprints were applied to glass and drywall surfaces, sooted in a controlled burn, and cooled. Liquid latex was sprayed on, dried, and peeled. Results yielded usable prints within the soot prior to removal techniques, but no further fingerprint enhancement was noted with Ninhydrin. Field studies using liquid latex will be continued by the (US) Virginia Fire Marshal Academy but it appears that liquid latex application is a suitable soot removal method for forensic applications.     

The effect of metal salt treatment on the photoluminescence of DFO-treated fingerprints

Ninhydrin developed fingerprints can be enhanced by treatment with a zinc or cadmium salt. The resulting fingerprint luminescence has been attributed to the induced coplanarity of the bicyclic indanedione rings of Ruhemann's purple due to complexation with the metal ions. This paper explores whether this effect also occurs in the 1,8-diaza-9-fluorenone (DFO)-amino acid adduct (1), formed from the reaction of DFO with amino acids. Molecular modeling studies of (1) indicate a relatively small out-of-plane angle of 24 degrees. 1H NMR studies indicate (1) is asymmetric about the C2 axis in contrast to what has been previously reported. Little, if any, enhancement of luminescence was observed with Zn, Cd, Ru or Eu treated DFO developed latent fingerprints. This lack of enhancement was also borne out by solution luminescence studies. Given this lack of enhancement of luminescence, solutions of (1) and the four metal ions above were analyzed by electrospray mass spectrometry (ESMS). This indicated the formation of predominantly 1:1 complexes of (1) with both Zn and Cd, and the 2:1 complex with ruthenium. No evidence of a Eu complex was found by ESMS.     

纸张上潜在手印三种前处理方法对DNA检验的影响

目的通过比较常见纸张上潜在手印盲提法与显现后精准提取法的接触DNA检出率,探讨常见纸张上接触DNA前处理的优选方案。方法比较五种常见纸张上使用盲提法和显现潜在手印(茚二酮显现法、茚三酮熏显法)后精准提取法采集的接触DNA样本检出率。结果粗糙日历纸盲提的接触DNA检出率为17.8%,通过茚二酮法和茚三酮法显现的潜在手印所提取的DNA检出率分别为75.6%、77.8%;光滑日历纸三种方法所提取的接触DNA检出率为4.4%、11.1%、11.1%;A4复印纸三种方法接触DNA检出率为20%、37.8%、66.7%;牛皮纸三种方法接触DNA检出率为20%、68.9%、64.4%;快递纸袋的三种方法接触DNA检出率为2.2%、6.7%、46.7%。结论不同纸张上潜在手印经显现后接触DNA检出率不同,通过茚二酮或茚三酮显示潜在手印后精准提取DNA的前处理方法相较于盲提法的接触DNA检出率高。实战中可应用此类方法同时获得手印与DNA分型,以有效提高证据力。     

The importance of dark adaptation for forensic examinations; an evaluation of the Crime-lite Eye™

Forensic practitioners are recommended to dark adapt their eyes prior to conducting evidential searches in the dark. The dark adaptation process remains poorly standardised across the discipline, with little quantified regarding the benefits of such preparative steps. Herein, we report the findings of a study that recruited 50 participants to assess the effectiveness of the Crime-lite Eye?, a darkness adaptation device developed to assist forensic practitioners both in the laboratory and in field. Participants were tasked with searching for the fluorescent signatures left by reaction of 1,8-diazafluoren-9-one (DFO) with amino acids, in a manner akin to the fluorogenic fingerprint treatment of porous evidence. Using an Epson Stylus Photo R265 inkjet printer, ink cartridges were filled with alanine solutions of various concentrations, allowing different motifs to be printed onto copy paper and subsequently developed using DFO. Participants searched for this ‘evidence’ both with and without dark adapted vision. On average, participants were able to locate and correctly recognise 16% more evidence once dark adapted using the Crime-lite Eye?.The increase in evidence located by participants once dark adapted suggests that crime scene officers should be dark adapting in order to visualise as much as possible. The time taken to dark adapt, 10?min on average during this study, is not excessively long, and should not significantly slow the investigation.     

STR genotyping and mtDNA sequencing of latent fingerprint on paper

A systematic study was conducted to investigate whether DNA can be successfully extracted from latent fingerprints deposited on ordinary paper and analysed using short tandem repeat profiling and mitochondrial DNA sequencing. In order to evaluate the performance of latent fingerprint analysis in a criminal case, experiments with varying conditions were carried out to improve our understanding of low copy number (LCN) DNA typing. After optimising the extraction methods to achieve increased sensitivity, the examination of touched paper can routinely yield the STR profile of the individual who has touched it. A fingerprint can therefore be considered as a potential source of DNA for genetic identification. Nevertheless, the findings of our "after enhancement experiment" (using chemically or physically pre-treated fingerprints), and our "mixture experiment" (using fingerprints from three to four people on the same sheet of paper) help to define the limitations of the low copy number PCR technique in forensic casework.     

Exploring the recovery and detection of messenger RNA and DNA from enhanced fingermarks in blood

Often in the examination of bloodstained fingermarks discussion occurs around whether to prioritise the fingerprint evidence or focus on the biological evidence. Collecting a sample for genetic profiling may result in the loss of ridge detail that could have been used for fingerprint comparison. Fingermark enhancement and recovery methods along with sample collection methods could also compromise downstream genetic analysis. Previous forensic casework has highlighted circumstances where, after enhancement had been performed, it would have been extremely valuable to both identify the body fluid and generate a DNA profile from the same sample.We enhanced depletion series of fingermarks made in blood, using single treatments consisting of aqueous amido black, methanol-based amido black, acid yellow and leucocrystal violet, and exposure to long wave UV light. We then extracted the DNA and RNA for profiling, to assess the recovery and detection of genetic material from the enhanced fingermarks.We have shown that genetic profiling of bloodstained fingermarks can be successful after chemical enhancement; however it may still be necessary to prioritise evidence types in certain circumstances. From our results it appears that even with visible bloodstained fingermarks, leucocrystal violet can reduce the effectiveness of subsequent messenger RNA profiling. Aqueous amido black and acid yellow also have adverse effects on messenger RNA profiling of depleted fingermarks with low levels of cellular material. These results help with forensic decision-making by expanding knowledge of the extent of the detrimental effects of blood-enhancement reagents on both DNA profiling and body fluid identification using messenger RNA profiling.     

Evidence evaluation in fingerprint comparison and automated fingerprint identification systems--modelling within finger variability

Recent challenges and errors in fingerprint identification have highlighted the need for assessing the information content of a papillary pattern in a systematic way. In particular, estimation of the statistical uncertainty associated with this type of evidence is more and more called upon. The approach used in the present study is based on the assessment of likelihood ratios (LRs). This evaluative tool weighs the likelihood of evidence given two mutually exclusive hypotheses. The computation of likelihood ratios on a database of marks of known sources (matching the unknown and non-matching the unknown mark) allows an estimation of the evidential contribution of fingerprint evidence. LRs are computed taking advantage of the scores obtained from an automated fingerprint identification system and hence are based exclusively on level II features (minutiae). The AFIS system attributes a score to any comparison (fingerprint to fingerprint, mark to mark and mark to fingerprint), used here as a proximity measure between the respective arrangements of minutiae. The numerator of the LR addresses the within finger variability and is obtained by comparing the same configurations of minutiae coming from the same source. Only comparisons where the same minutiae are visible both on the mark and on the print are therefore taken into account. The denominator of the LR is obtained by cross-comparison with a database of prints originating from non-matching sources. The estimation of the numerator of the LR is much more complex in terms of specific data requirements than the estimation of the denominator of the LR (that requires only a large database of prints from an non-associated population). Hence this paper addresses specific issues associated with the numerator or within finger variability. This study aims at answering the following questions: (1) how a database for modelling within finger variability should be acquired; (2) whether or not the visualisation technique or the choice of different minutiae arrangements may influence that modelling and (3) what is the magnitude of LRs that can be expected from such a model. Results show that within finger variability is affected by the visualisation technique used on the mark, the number of minutiae and the minutiae configuration. They also show that the rates of misleading evidence in the likelihood ratios obtained for one of the configurations examined are low.     

A Preliminary Investigation into the Accuracy of 3D Modeling and 3D Printing in Forensic Anthropology Evidence Reconstruction,

There is currently no published empirical evidence‐base demonstrating 3D printing to be an accurate and reliable tool in forensic anthropology, despite 3D printed replicas being exhibited as demonstrative evidence in court. In this study, human bones (n = 3) scanned using computed tomography were reconstructed as virtual 3D models (n = 6), and 3D printed using six commercially available printers, with osteometric data recorded at each stage. Virtual models and 3D prints were on average accurate to the source bones, with mean differences from ?0.4 to 1.2 mm (?0.4% to 12.0%). Interobserver differences ranged from ?5.1 to 0.7 mm (?5.3% to 0.7%). Reconstruction and modeling parameters influenced accuracy, and prints produced using selective laser sintering (SLS) were most consistently accurate. This preliminary investigation into virtual modeling and 3D printer capability provides a novel insight into the accuracy of 3D printing osteological samples and begins to establish an evidence‐base for validating 3D printed bones as demonstrative evidence.     

Visualization of latent fingerprint corrosion of metallic surfaces

Abstract:  Chemical reactions between latent fingerprints and a variety of metal surfaces are investigated by heating the metal up to temperatures of ∼600°C after deposition of the fingerprint. Ionic salts present in the fingerprint residue corrode the metal surface to produce an image of the fingerprint that is both durable and resistant to cleaning of the metal. The degree of fingerprint enhancement appears independent of the elapsed time between deposition and heating but is very dependent on both the composition of the metal and the level of salt secretion by the fingerprint donor. Results are presented that show practical applications for the enhancement to fingerprints deposited in arson crime scenes, contaminated by spray painting, or deposited on brass cartridge cases prior to discharge. The corrosion of the metal surface is further exploited by the demonstration of a novel technique for fingerprint enhancement based on the electrostatic charging of the metal and then the preferential adherence of a metallic powder to the corroded part of the metal surface.     

Analysis of Mitochondrial DNA from a Burned,Ninhydrin‐Treated Paper Towel

Contact‐based evidence is likely to have limited quantities of DNA and may yield mixed profiles due to preexisting or contaminating DNA. In a recent arson investigation, a paper towel was collected and used as circumstantial evidence. The paper towel was partially burned and was likely set on fire with flammable liquid. As part of the investigation, the paper towel was treated with ninhydrin to visualize fingerprint evidence. Initial DNA analysis of two swabs was negative for short tandem repeat (STR) markers and revealed a mixture of mitochondrial DNA (mtDNA). Analysis of 13 additional cuttings yielded four more mixed profiles, but also two samples with a common single‐source profile. The single‐source mtDNA profile matched that of the primary suspect in the case. Thus, even if initial mtDNA analysis yields a mixed profile, a sampling strategy involving multiple locations can improve the chance of obtaining valuable single‐source mtDNA profiles from compromised evidence in criminal casework.     

Vapor-phase staining of cyanoacrylate-fumed latent fingerprints using p-dimethylaminobenzaldehyde

Contrasting or enhancing of cyanoacrylate ester-fumed latent fingerprints deposited on solvent-sensitive materials such as oil marker writings and rough surface materials such as unglazed earthenware is not easy by conventional dye solutions dipping or dye powder dusting. In this study, a new vapor-phase staining method using p-dimethylaminobenzaldehyde (DMAB) is proposed for staining such materials. DMAB has high volatility and selective absorbability to cyanoacrylate-fumed fingerprints, so that cyanoacrylate-treated samples can be easily stained by leaving them simply in a closed container along with DMAB crystals for 48-96 h at room temperature or in conjunction with the use of mild heating. The stained fingerprint could be excited by UV irradiation (365 nm), and the fluorescent fingerprint was photographed through a UV cut-off filter (420 nm). The new method achieved minimally destructive fluorescent staining for the solvent-sensitive samples and the rough surfaced samples.