Stubs Versus Swabs? A Comparison of Gunshot Residue Collection Techniques

Abstract: The collection efficiency of two widely used gunshot residue (GSR) collection techniques—carbon‐coated adhesive stubs and alcohol swabs—has been compared by counting the number of characteristic GSR particles collected from the firing hand of a shooter after firing one round. Samples were analyzed with both scanning electron microscopy and energy dispersive X‐rays by an experienced GSR analyst, and the number of particles on each sample containing Pb, Ba, and Sb counted. The adhesive stubs showed a greater collection efficiency as all 24 samples gave positive results for GSR particles whereas the swabs gave only positive results for half of the 24 samples. Results showed a statistically significant collection efficiency for the stub collection method and likely reasons for this are considered.     

Visualization of Latent Fingerprint Corrosion on a Discharged Brass Shell Casing

Abstract:  Latent fingerprint visualization on discharged shell casings can provide good forensic evidence, particularly if the casing is recovered at the scene of a crime where a firearm has been discharged. Unfortunately, visualization of such latent fingerprints when they were deposited prior to discharge of the firearm is problematic as both increased temperature and abrasive friction can inhibit fingerprint visualization with conventional techniques. We present a case study that demonstrates latent fingerprint visualization on a discharged shell casing recovered 14 years ago from the scene of a homicide. Previous cyanoacrylate fuming of the casing had failed to reveal any fingerprints. We use a visualization technique in which a conducting carbon powder adheres preferentially to latent fingerprint corrosion of the casing surface, following the application of a potential of 2.5 kV to the casing. This technique presents opportunities for the review of old cases and for consideration of its use in current cases.     

Visualization of Latent Fingerprint Corrosion of Brass

Abstract:  Visualization of latent fingerprint deposits on metals by enhancing the fingerprint-induced corrosion is now an established technique. However, the corrosion mechanism itself is less well understood. Here, we describe the apparatus constructed to measure the spatial variation (Δ V ) in applied potential ( V ) over the surface of brass disks corroded by latent fingerprint deposits. Measurement of Δ V for potential of 1400 V has enabled visualization of fingerprint ridges and characteristics in terms of this potential difference with Δ V typically of a few volts. This visualization is consistent with the formation of a Schottky barrier at the brass-corrosion product junction. Measurement of the work function of the corroded brass of up to 4.87 ± 0.03 eV supports previous results that suggested that the corrosion product is composed of p-type copper oxides. A model for the galvanic corrosion of brass by ionic salts present in fingerprint deposits is proposed that is consistent with these experimental results.     

A pilot survey of courses in technology transfer offered at selected colleges and universities in the United States

This survey was developed to determine the nature of the programs and courses intechnology transfer now in existence in the United States. A pilot study approach was used, without operationalizing a definition, to avoid excluding possible technology transfer activities. Results indicate twenty colleges and universities offering courses in a wide range of academic settings including engineering, business, psychology, sociology, political science, environmental studies and agriculture. With the majority of respondents, technology transfer is studied as a combination of the history of science and technology, management, information science, and communication. In this sense, it appears to be an interdisciplinary study with a strong direction toward communication protocols, and management skills as primary outcomes.     

Debt,Uneven Development and Capitalist Crisis in South Africa: from Moody’s macroeconomic monitoring to Marikana microfinance mashonisas

The power, vulnerability and destructiveness of financial markets are out of control in South Africa, now among the most unequal, economically volatile and protest-intensive countries worldwide. While debt made itself felt in many sites, of interest in both criticising and promoting solutions is the ‘scale jumping’ required from South Africa’s national insertion into the world financial system, entailing the Reserve Bank setting very high interest rates, in turn leading to unpayable levels of consumer debt, and at a time when microfinance is suddenly discredited as a development strategy. Macro- and micro-financial problems fused in the course of the Marikana Massacre of August 2012, reflecting the local and global powers of the Moody’s rating agency and ‘mashonisa’ loan sharks. The over-indebted Marikana mineworkers, who led a strike which catalysed many wildcat strikes elsewhere, confronted the local crisis by displacing it into the national economy. This only heightened the contradictions that Moody’s punished with its September 2012 credit-rating downgrade. Without a genuine ‘debt relief’ solution at both scales, society will continue to unravel, as financialisation reaches its limits within one of the world’s most extreme cases of uneven and combined development.     

Physical Characterization and Recovery of Corroded Fingerprint Impressions from Postblast Copper Pipe Bomb Fragments

Pipe bombs made from 1 mm thick copper pipe were detonated with a low explosive power powder. Analysis of the physical characteristics of fragments revealed that the copper had undergone work hardening with an increased Vickers Hardness of 107HV1 compared with 80HV1 for unexploded copper pipe. Mean plastic strain prior to fracture was calculated at 0.28 showing evidence of both plastic deformation and wall thinning. An examination of the external surface showed microfractures running parallel with the length of the pipe at approximately 100 μm intervals and 1–2 μm in width. Many larger fragments had folded “inside out” making the original outside surface inaccessible and difficult to fold back through work hardening. A visual examination for fingerprint corrosion revealed ridge details on several fragments that were enhanced by selective digital mapping of colors reflected from the surface of the copper. One of these fingerprints was identified partially to the original donor.     

A Comparison of Fingerprint Sweat Corrosion of Different Alloys of Brass

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys.     

Effect of Temperature on the Visualization by Digital Color Mapping of Latent Fingerprint Deposits on Metal

Visualization of fingerprint deposits by digital color mapping of light reflected from the surface of heated brass, copper, aluminum, and tin has been investigated using Adobe^® Photoshop^®. Metals were heated to a range of temperatures (T) between 50°C and 500°C in 50°C intervals with enhancement being optimal when the metals are heated to 250°C, 350°C, 50°C, and 300°C, respectively, and the hue values adjusted to 247°, 245°, 5°, and 34°, respectively. Fingerprint visualization after color mapping was not degraded by subsequent washing of the metals and color mapping did not compromise the visibility of the fingerprint for all values of T. The optimum value of T for fingerprint visibility is significantly dependent of the standard reduction potential of the metal with Kendall's Tau (τ) = 0.953 (p < 0.001). For brass, this correlation is obtained when considering the standard reduction potential of zinc rather than copper.     

A Calibration Test for Latent Fingerprint Development on Thermal Paper

A calibration test is described for monitoring the operation of equipment used to develop latent fingerprints on thermal paper by the application of either controlled or uncontrolled heat. A working solution of a water/glycerol emulsion and butylene glycol is applied to thermal paper by means of either a vinyl stamp and pad, or a marker pen. Varying the amount of butylene glycol enables the thermal paper to change color at different temperatures between approximately 40 and 60°C, which is below the normal color change temperature of the paper. The described test may be used to verify the correct operation, at different temperatures, of a controlled heat source during and after fingerprint development (such as the Hot Print System) or to monitor the paper temperature with an uncontrolled heat source (such as a warm air blower), thereby avoiding unintentional coloring of the entire paper surface.