Distribution of the Minutiae in Hypothenar Palm Prints in Slovak Adults: Indications for Personal Identification

Minutiae are small distinguishing features found along every ridge flow, which make each friction ridge print unique. The most common friction ridge prints found at the crime scene are fingerprints; therefore, the most of the minutiae studies are focused exactly on this kind of prints. The authors believe that further examination and enlargement of the palm print database could result in better use of the palm prints for personal identification. We analyzed a total of 160 palm prints from 40 females and 40 males aged between 18 and 70 years from Slovakia. For the evaluation of the minutiae, the area of the hypothenar had to be marked out. The classification of the minutiae used for this study was based on a modified version of the classification system using the total of 13 types of minutiae. The frequency of every minutiae type was calculated and, using the chi-square test with Yates's correction, bilateral and sex differences were assessed. The relationship between the different types of minutiae was examined with Pearson's correlation test. During the initial phases of the identification process, the focus should be on the least common types of minutiae (Y or M and return), which were found not to correlate; thus, their mutual occurrence is random (e.g., overlap—Y or M, crossbar—return, or Y or M—dock). The results of the present study show which specific minutiae types are the most suitable for personal identification. These findings may be beneficial in more effective outcome of the identification process.     

Sharp Force Homicide in Denmark 1992–2016

Sharp force trauma is a common homicide method. The weapon is typically a knife, which is easily accessible and does not require special skills. We have analyzed all 471 sharp force homicides in Denmark during 1992–2016 with special focus on aspects that are relevant to forensic pathologists, including the distribution of wounds and organ injuries. Most homicides were committed inside with a kitchen knife. The front left thorax was the most common area to be affected by sharp force trauma. In 18.9% of the victims, there was only one sharp injury, the majority on the thorax. The most common trajectory for stab wounds was directly posterior with no deviation to the sides or up/down followed by directly anterior. The heart (including pericardium) and lungs (including hemo- and pneumothorax) had injuries in more than 75% of the victims. 67% of victims were males. Female victims had more sharp force injuries and defense wounds than male victims. Most females were killed in domestic homicides (73.7%), most commonly in partner killings (56.4%). In contrast, many male victims were killed in a setting of nightlife/intoxication (34.0%) most by a friend/acquaintance delivering a few stab wounds. The results clearly show strong sex differences in both victims and offenders. This could be useful for shaping policies and public opinion, and as a route for understanding the developments in interpersonal violence. In the narrow setting of death investigation, our results will provide an evidence-based approach to understanding the injury patterns in sharp force homicide.     

Improved Area of Origin Estimation for Bloodstain Pattern Analysis Using 3D Scanning

An important component of crime scene reconstruction is bloodstain pattern analysis (BPA). Where BPA concerns impact patterns, estimating the area of origin is critical information for scene reconstruction. Traditionally, this is achieved by measuring individual bloodstains and performing trigonometric calculations; however, 3D scanning has been proposed as a viable alternative for overcoming logistical and practical concerns with the manual method. Therefore, this project aimed to establish whether the FARO Focus 3D scanner and FARO Zone 3D software can improve the accuracy of area of origin estimates relative to the manual method. We created a series of eight bloodstain impact patterns and performed paired analysis using the two methods to estimate areas of origin for each pattern. Our data suggested that FARO-derived estimates were generally more accurate than using the manual method. FARO-estimated heights of origin areas were generally closer to the true distance. Both methods underestimated the distance from the wall for most patterns originating 150mm or greater from the wall, but overestimated distances for patterns originating closer to the wall. The degree to which distances were underestimated increased significantly the further the blood source was from the wall and was greater for FARO-derived estimates. The results of this research contribute to the validation of these instruments for operational implementation for BPA and should be considered alongside the practical benefits of 3D scanning relative to manual methods. Further, 3D scanning can provide reliable BPA reconstruction documentation for technical review and court presentation.     

Evaluation of Suspected Counterfeit Pharmaceutical Tablets Declared to Contain Controlled Substances Using Handheld Raman Spectrometers

This study describes the performance of handheld Raman devices for determining whether suspect pharmaceutical tablets declared to contain controlled substances were consistent with authentic (CWA) or not consistent with authentic (NCWA) tablets using a simple, rapid, field-friendly method capable of being used by nonexperts. Twenty-five authentic products and 84 known NCWA tablets were examined using three “parent” devices for a total of 327 analyses. On average, the parent devices yielded a true pass rate of 100%, a true fail rate of 98.4%, a false pass rate of 1.6%, and a false fail rate of 0%. The methods/libraries were then transferred to 13 identical “daughter” devices, which were used to examine 10 suspect finished dosage forms in duplicate (six known NCWA tablets and four authentic tablets) for a total of 260 measurements. On average, the daughter devices had a true pass rate of 100%, a true fail rate of 95.5%, a false pass rate of 4.5%, and a false fail rate of 0.0%. These data demonstrate that the parent–daughter electronic transfer method was successful, which permits the ability to develop methods in the laboratory that can be seamlessly pushed out to field devices. The methods can then be used to (i) prioritize samples for additional testing using other more time-consuming laboratory-based techniques needed to detect and quantify active ingredients and (ii) help support the interdiction of dangerous tablets at ports of entry, thereby preventing them from reaching the supply chain.     

Evaluating the Potential for Unintentional Occupational Exposure to Fentanyl and Fentanyl Analogues Among Medicolegal Death Investigators and Autopsy Technicians

Recent increases in deaths in the United States from synthetic opioids such as fentanyl and fentanyl analogues (fentanyls) have raised concerns about possible occupational exposures to these potent agents. Medicolegal death investigators and autopsy suite staff might perform job tasks involving exposure to fentanyls. The potential for exposure to fentanyls among medicolegal death investigators and autopsy technicians at a state medical examiner's office was evaluated through review of caseload characteristics, injury and illness logs, and procedures and policies and discussions with management and employee representatives. The evaluation showed that this medical examiner's office had low potential for work-related exposure to fentanyls; its standard operating procedures and personal protective equipment requirements should reduce the potential for occupational exposure. Medicolegal death investigation agencies can develop and implement guidance to control exposures and provide workforce education and training to reduce the potential for work-related exposure to fentanyls.     

Reassembling Linux-based Hybrid RAID

Network-attached storage (NAS) is a system that uses a redundant array of disks (RAID) to create virtual disks comprising multiple disks and provide network services such as FTP, SSH, and WebDAV. Using these services, the NAS's virtual disks store data about individuals or groups, making them a critical analysis target for digital forensics. Well-known storage manufacturers like Seagate, Synology, and NETGEAR use Linux-based software RAID, and they usually support Berkeley RAID (e.g., RAID 0, 1, 5, 6, and 10) as well as self-developed hybrid RAID. Those manufacturers have published data on the introduction and features of hybrid RAID, but there is not enough information to reassemble RAID from a digital forensic perspective. Besides, digital forensic tools (such as EnCase, FTK, X-ways, and RAID Reconstructor) do not support automatic RAID reassembly for hybrid RAID, so research on hybrid RAID reassembly methods is necessary. This paper analyzes the disk array composed of hybrid RAID and explains the layout of disk array, partition layout in hybrid RAID, and hybrid RAID configuration strategy. Furthermore, it suggests parameters that are required for RAID reassembly and then propose a hybrid RAID reassembly procedure using them. Finally, we propose a proof-of-concept tool (Hybrid RAID Reconstructor) that identifies hybrid RAID from disk array and parse RAID parameters.     

Sudden Death Caused by Rupture of Spontaneous Ductus Arteriosus Aneurysm in an Adult

A 55-year-old man complained of sudden onset of severe neck pain. This was followed by prompt loss of consciousness and death. Autopsy revealed rupture of a saccular aneurysm, which was considered to have resulted from enlargement of the remaining ductal tissue, and was located on the medial aspect of the uppermost portion of the descending aorta. Dense blood extravasation was noted in the posterior mediastinum and extending to the strap muscles of the neck and larynx. Histological examination of the rupture site revealed disappearance of the medial elastic fibers and thickened intima covered with dense fibrous tissue. Spontaneous ductus arteriosus aneurysm in adults is a rare finding, but widespread use of imaging technologies has revealed that it develops more frequently than previously recognized. Fatal complications may occur even when the aneurysm is relatively small. Therefore, pathologists should be aware of this aneurysm as a potential cause of sudden death.     

A Census of Medicolegal Death Investigation in the United States: A Need to Determine the State of our Nation’s Toxicology Laboratories and Their Preparedness for the Current Drug Overdose Epidemic

In 2007, the Bureau of Justice Statistics reported on 2004 data collected from the Census of Medical Examiner and Coroner Offices (CMEC). The CMEC was one of the first comprehensive reports on the state of the medicolegal death investigation system in the United States and included information on administration, expenditure, workload, specialized death investigations, records and evidence retention, and resources. However, the report did not include responses on questions that were related to toxicology such as specimen retention and type of testing. The purpose of this publication is to provide the community with toxicology laboratory-specific responses from nearly 2000 medical examiner and coroner (MEC) offices. Data obtained from a BJS CMEC public use dataset for any remaining information that was not reported in the 2007 BJS report were evaluated specific to the operation of toxicology laboratories within a MEC office or specific to toxicology testing. The CMEC includes information on average operating budget for MEC offices with internal or external toxicology services, budget for toxicology/microbiology services, respondents’ routine uses of toxicology analysis, toxicology specimen retention time, average turnaround times, use of computerized information management systems, and participation in federal data collections. These historical data begin to address the present state of our nation’s toxicology laboratories within the medicolegal death investigation system and their preparedness for the current drug overdose epidemic.     

Fatal Methemoglobinemia Due to Acute Inhalation of Methyl Nitrite in an Industrial Accident

Methyl nitrite is suggested to cause methemoglobinemia by generating methemoglobin, which may be lethal when the methemoglobin concentration exceeds 70%. However, intoxication with methyl nitrite is seldom reported compared with that with other nitrites. Here, we present an industrial accident involving methyl nitrite inhalation during its synthesis process that resulted in three fatalities and one survivor. The autopsy revealed conspicuous blue-gray discoloration in various parts of the body, including the skin, airway mucosa, vessels, brain, heart, and among other areas. The toxicological tests on the deceased showed methemoglobin concentrations in the blood over the lethal level and increased nitrite ion levels in the blood, gastric contents, liver, and lung tissue compared with those in control samples. The cause of death was determined to be methemoglobinemia-induced hypoxia due to methyl nitrite inhalation. This report provides evidence that in methyl nitrite intoxication, exposure duration has a significant influence on the postmortem changes and likelihood of a fatal outcome may be related to the age of the victim. More attention is required regarding the industrial hazards of this substance.