Heat and let dye: Part II – Rapid heat-fixing of blood traces

Blood-contaminated shoeprints and footmarks contain valuable operational information as they may bind an individual who stepped in the crime scene with the incident and not merely with the location. As determining the age of a bloodstain remains a challenge, while processing the scene, it is difficult to determine whether the blood is completely, or partially, dry. Thus, executing a dye staining protocol may wash these marks away as they might still be soluble. However, to meet this challenge, it is possible to fix blood marks using heat. This study aims to find a solution for floor surfaces covered by heavier blood traces (shoeprints and footmarks). For this purpose, a new pseudo-operating device was constructed for examining the blood-fixing process of both mentioned trace types. Two trials were performed with depletion marks. The results revealed that fully developed fresh and heavily blood deposits were obtained by heating to 200°C for 7.5 min using the fixing device, followed by a staining protocol using amido black solution. The achieved sharp resolution of the examined bloody prints demonstrates that in certain cases the dehydration mechanism of heating is preferred over precipitating the proteins attributed to 5-sulfosalycilic acid; thus, reducing the risk of washing blood evidence while processing the crime scene.     

Total Ion Spectra versus Segmented Total Ion Spectra as Preprocessing Tools for Gas Chromatography – Mass Spectrometry Data

Alignment of fire debris data from GC‐MS for chemometric analysis is challenged by highly variable, uncontrolled sample and matrix composition. The total ion spectrum (TIS) obviates the need for alignment but loses all separation information. We introduce the segmented total ion spectrum (STIS), which retains the advantages of TIS while retaining some retention information. We compare the performance of STIS with TIS for the classification of casework fire debris samples. TIS and STIS achieve good model prediction accuracies of 96% and 98%, respectively. Baseline removal improved model prediction accuracies for both TIS and STIS to 97% and 99%, respectively. The importance of maintaining some chromatographic information to aid in deciphering the underlying chemistry of the results and reasons for false positive/negative results was also examined.     

Body Morph: Feasibility Testing of an Interactive CD-ROM to Teach Young Adolescents about Puberty

The aim of this pilot study was to examine the feasibility of an interactive computer program among 34 sixth and seventh grade children and to assess the potential for knowledge acquisition about puberty. Based on a developmental self-esteem approach to teach children about their bodies, the Body Morph program was designed to maximize the educational experience by: (1) tailoring puberty information to boys or girls, and (2) creating a confidential experience. Preliminary results indicated that students significantly improved their knowledge about puberty after using the program. Satisfaction among boys and girls for this type of educational approach suggests that it is a compelling format from which to learn about puberty.This research project was funded with the support of the National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK) 1R43DK061269-01A2 to develop an educational computer program to improve body image in middle schoolers.     

A comprehensive ATR-FTIR spectroscopic analysis for the identification and differentiation of lip balms

Lip balm may be encountered as physical evidence in cases involving sexual assaults, homicides, and kidnappings. Lip balm can be used as corroborative evidence by providing a potential link between the victim, accused, and the crime scene. For lip balms to be used as evidence, it is important to understand the diversity and their aging process under different conditions. Therefore, in this study, ATR-FTIR spectroscopy in conjunction with chemometric tools such as principal component analysis (PCA) and linear discriminant analysis (LDA) has been used for the objective identification and differentiation of 20 brands of lip balms. Moreover, lip balms on different substrates and wearing effects over time were also investigated. The results show that the PCA-LDA training accuracy was 92.5%, whereas the validation accuracy comes out to be 83.33%. A blind study using pristine samples was also performed which resulted in 80% PCA-LDA accuracy. PCA-LDA prediction of samples on various substrates showed a higher chemometric prediction accuracy for nonporous substrates (glass, plastic, and steel), than for porous substrates (cotton cloth, cotton swab stick, dry tissue paper, and white paper) for samples kept in room temperature and under sunlight for 15 days. The substrate study showed that the samples from various substrates could effectively generate respective spectra which can help in brand-level identification even after several days. The present method demonstrates a potential for lip balm samples to be used in forensic casework applications.     

The role of DNA in criminal indictments in Israel

In their investigations of criminal cases, law enforcement agencies rely heavily on forensic evidence. Numerous studies have examined the scientific and technological advancements of DNA testing, but little evidence exists on how the availability of DNA evidence influences prosecutors' decisions to move cases forward in the criminal justice system. We created a new database by juxtaposing data from the Forensics Division of the Israel Police, which recorded the presence (or not) of DNA profiles in criminal cases (n = 9862), and data on the indictment decision for each case (2008–2019). Rates of indictments are computed for each case, and trend lines are used to present variations in the rates of indictment decisions with and without DNA profiles. Approximately 15% of all criminal cases without DNA presented to the prosecutor's office are subsequently prosecuted, compared with nearly 55% of cases with DNA profiles. The presence of DNA evidence influences the prosecutor's decision to move a case forward in the criminal justice system. Utilizing a scientific approach to prosecute offenders is a welcome development; however, DNA evidence is not infallible, and caution must be exercised in regard to DNA's overuse in the legal system.     

A systematic approach to improve downstream single-cell analysis for the DEPArray™ technology

Most commercially available STR amplification kits have never been fully validated for low template DNA analysis, highlighting the need for testing different PCR kits and conditions for improving single-cell profiling. Here, current strategies rely mainly on adjusting PCR cycle number and analytical threshold settings, with a strong preference for using 30 amplification cycles and thresholds at 30–150 RFU for allele detection. This study aimed to (1) determine appropriate conditions for obtaining informative profiles utilizing a dilution series, and (2) test the outcome on single cells using the DEPArray™ technology. Four routinely applied forensic STR kits were compared by using three different amplification volumes and DNA dilutions down to 3.0 pg, while two well-performing kits were used for single/pooled leucocyte and sperm cell genotyping. Besides reduced costs, the results demonstrate that a 50%–75% PCR volume reduction was beneficial for peak height evaluation. However, this was counteracted by an increased artifact generation in diluted DNA volumes. Regarding profile completeness, the advantage of volume reduction was only prominent in samples processed with Fusion 6C. For single and pooled cells, ESIFast and NGMDetect provided a solid basis for consensus profiling regarding locus failure, although locus dropouts were generally observed as stochastic events. Amplification volume of 12.5 μL was confirmed as appropriate in terms of peak heights and stutter frequencies, with increased stutter peaks being the main artifact in single-cell profiles. Limitations associated with these analyses are discussed, providing a solid foundation for further studies on low template DNA.     

IoT forensics: Exploiting unexplored log records from the HIKVISION file system

CCTV surveillance systems are IoT products that can be found almost everywhere. Their digital forensic analysis often plays a key role in solving crimes. However, it is common for these devices to use proprietary file systems, which frequently hinders a complete examination. HIKVISION is a well-known manufacturer of such devices that typically ships its products with its proprietary file system. The HIKVISION file system has been analyzed before but that research has focused on the recovery of video footage. In this paper, the HIKVISION file system is being revisited regarding the log records it stores. More specifically, these log records are thoroughly examined to uncover both their structure and meaning. These unexplored pieces of evidence remain unexploited by major commercial forensic software, yet they can contain critical information for an investigation. To further assist digital forensic examiners with their analysis, a Python utility, namely the Hikvision Log Analyzer, was developed as part of this study that can automate part of the process.     

A comparison of three shoe sole impression lifting methods at high substrate temperatures

Footwear impressions are a common form of evidence found at crime scenes, and the accurate recovery and recording of such impressions is critical for shoe sole comparison and identification. The lifting of shoe sole impressions from hot surfaces (>30°C/86°F) and in hot environments has received little attention in the literature, particularly in relation to the recovery of class and randomly acquired characteristics (RACs) required for accurate comparisons. This study addressed this knowledge gap by comparing the performance of three common impression lifters (gelatin, adhesive, and vinyl static cling film) at recovering shoe sole impressions in dust from hot flooring substrates. Dry origin dust shoe sole impressions were made on ceramic tile, galvanized metal, and laminated wood flooring using a shoe that possessed two RACs and five class characteristics present on the sole. Substrates were left in direct full sun for five hours during a summer day prior to lifting. Performance was measured by the proportion of RACs and class characteristics visible in each lifted impression. Results demonstrated that the vinyl static cling film tested performed poorly across all substrates, particularly for metal (23.8% marks recovered), including notable shrinkage of the lifted impression. In contrast, adhesive (~96% marks recovered over all substrates), and to a lesser extent gelatin (~85%), lifts were highly successful on hot substrates. These data suggest that adhesive lifts can consistently and accurately recover shoe sole impressions from hot substrates. This study contributes critical information for crime scene examiners to improve and expand evidence recovery in hot environments.     

The effect of household corrosive substances on latent fingermark development in the context of deliberate corrosive substance attacks

Corrosive substance attacks (CSA) are a prevalent issue in the UK with 525 offenses involving a corrosive substance reported to the police in the year ending March 2022. Easy availability, low cost, and concealability in public are common reasons for choosing a corrosive substance as a weapon. The Metropolitan Police revealed that 68% of 1849 CSA cases resulted in no suspect identified or evidential difficulties. There is limited research into the effect of corrosive substances on latent fingermarks. This study aimed to determine the potential for fingermarks to be recovered from surfaces exposed to a household corrosive substance within the context of a deliberate CSA. Natural and sebaceous-loaded fingermarks were exposed to Domestos bleach, Harpic limescale remover (hydrochloric acid-based) and lemon juice. Harpic limescale remover had the most detrimental effect, with only 7.1% of fingermarks (n = 378) exposed being identifiable (defined as sufficient clear ridge detail for identification) after enhancement, followed by bleach with only 10.3% of fingermarks (n = 378) identifiable. Lemon juice had the least detrimental effect on fingermarks, with 40.5% fingermarks (n = 378) identifiable compared to 53.4% for the controls (not exposed to any substance; n = 378). Throughout the study, fewer natural fingermarks were identifiable after exposure to corrosive substances compared to sebaceous fingermarks which was as expected. Overall, this study demonstrated that there is potential to recover latent fingermarks, depending on their composition, following exposure to a household corrosive substance. This area warrants further research to establish best practice to maximize the potential to recover identifiable fingermarks.