DNA Recovery From Tape-Lifting Kits: Methodology and Practice

In the case of suspicious deaths, the technique of 1:1 taping is often used in Belgium. It consists of affixing a large number of adhesive tapes to the body of the victim. It is conventionally aimed at obtaining microtraces (e.g., fibers, hair) and is usually not used for DNA analysis. However, in some cases, DNA analysis of certain areas of interest identified on the 1:1 taping material can offer a last resort solution. The four-step method that is described in this article involves the selection of areas of interest on the body (Step 1), the selection of the corresponding tapes (Step 2), the decontamination of the tapes (Step 3), the selection of areas of interest on the tapes, for DNA sampling (Step 4). The method is illustrated by its successful application in four murder cases. In each case, DNA profiles of good quality could be identified, including profiles of persons different from the victim.     

Effect of Wind on Horizontal Displacement of Fatal Fall from a Height

The horizontal displacement of the human body resulting from fatal fall from a height is an important variable commonly used to inversely determine the cause or identify other forensic aspects of the fall. When examining the horizontal displacement, the wind effect is generally ignored. This technical note reports analytical modeling of the falling process, utilizing previous measurements of wind force acting on the human body, for determining the functional relationship between the wind speed and the horizontal displacement in the falling process. The result reveals that it does not take extremely rare wind conditions to cause a considerable shift of the human body, highlighting the importance to consider wind as a factor in investigations of fatal falls.     

Molecular Identification of Necrophagous Dermestes Species in South Korea Using Cytochrome c Oxidase Subunit I Nucleotide Sequences (Genus Dermestes)

Species identification of necrophagous insects found on a dead body is an essential key in applying medicolegal entomology to the estimation of postmortem interval (PMI). Due to limited morphological identification of insect evidence, several studies have identified species using molecular information such as DNA markers. While considerable cytochrome c oxidase subunit I (COI) gene sequence data of necrophagous fly species have been collected and annotated, those of necrophagous beetle species have not. Since necrophagous beetles such as Dermestes species have a larval period longer than that of flies, beetles are useful in even the late decomposition phase in estimating minimum PMI. To obtain the full-length COI gene sequences of six Dermestes species collected from South Korea, we designed primers for polymerase chain reaction amplification and sequencing. The obtained full COI nucleotide sequences were used for performing phylogenic analysis and comparison with previously reported sequences. The results demonstrated that the COI gene sequences could be used to identify forensically important Dermestes species in South Korea.     

Volatile Organic Compound Profiling from Postmortem Microbes using Gas Chromatography–Mass Spectrometry

Volatile organic compounds (VOCs) are by-products of cadaveric decomposition and are responsible for the odor associated with decomposing remains. The direct link between VOC production and individual postmortem microbes has not been well characterized experimentally. The purpose of this study was to profile VOCs released from three postmortem bacterial isolates (Bacillus subtilis, Ignatzschineria indica, I. ureiclastica) using solid-phase microextraction arrow (SPME Arrow) and gas chromatography–mass spectrometry (GC-MS). Species were inoculated in headspace vials on Standard Nutrient Agar and monitored over 5 days at 24°C. Each species exhibited a different VOC profile that included common decomposition VOCs. VOCs exhibited upward or downward temporal trends over time. Ignatzschineria indica produced a large amount of dimethyldisulfide. Other compounds of interest included alcohols, aldehydes, aromatics, and ketones. This provides foundational data to link decomposition odor with specific postmortem microbes to improve understanding of underlying mechanisms for decomposition VOC production.     

Sharp Force Homicide in Denmark 1992–2016

Sharp force trauma is a common homicide method. The weapon is typically a knife, which is easily accessible and does not require special skills. We have analyzed all 471 sharp force homicides in Denmark during 1992–2016 with special focus on aspects that are relevant to forensic pathologists, including the distribution of wounds and organ injuries. Most homicides were committed inside with a kitchen knife. The front left thorax was the most common area to be affected by sharp force trauma. In 18.9% of the victims, there was only one sharp injury, the majority on the thorax. The most common trajectory for stab wounds was directly posterior with no deviation to the sides or up/down followed by directly anterior. The heart (including pericardium) and lungs (including hemo- and pneumothorax) had injuries in more than 75% of the victims. 67% of victims were males. Female victims had more sharp force injuries and defense wounds than male victims. Most females were killed in domestic homicides (73.7%), most commonly in partner killings (56.4%). In contrast, many male victims were killed in a setting of nightlife/intoxication (34.0%) most by a friend/acquaintance delivering a few stab wounds. The results clearly show strong sex differences in both victims and offenders. This could be useful for shaping policies and public opinion, and as a route for understanding the developments in interpersonal violence. In the narrow setting of death investigation, our results will provide an evidence-based approach to understanding the injury patterns in sharp force homicide.     

Improved Area of Origin Estimation for Bloodstain Pattern Analysis Using 3D Scanning

An important component of crime scene reconstruction is bloodstain pattern analysis (BPA). Where BPA concerns impact patterns, estimating the area of origin is critical information for scene reconstruction. Traditionally, this is achieved by measuring individual bloodstains and performing trigonometric calculations; however, 3D scanning has been proposed as a viable alternative for overcoming logistical and practical concerns with the manual method. Therefore, this project aimed to establish whether the FARO Focus 3D scanner and FARO Zone 3D software can improve the accuracy of area of origin estimates relative to the manual method. We created a series of eight bloodstain impact patterns and performed paired analysis using the two methods to estimate areas of origin for each pattern. Our data suggested that FARO-derived estimates were generally more accurate than using the manual method. FARO-estimated heights of origin areas were generally closer to the true distance. Both methods underestimated the distance from the wall for most patterns originating 150mm or greater from the wall, but overestimated distances for patterns originating closer to the wall. The degree to which distances were underestimated increased significantly the further the blood source was from the wall and was greater for FARO-derived estimates. The results of this research contribute to the validation of these instruments for operational implementation for BPA and should be considered alongside the practical benefits of 3D scanning relative to manual methods. Further, 3D scanning can provide reliable BPA reconstruction documentation for technical review and court presentation.     

Simplified Direct PCR Method for Reference Buccal Samples Using a Non-FTA Card by Omitting the Pretreatment Step

When using non-FTA cards in commercial multiplex STR kits for direct PCR, pretreatment steps with specific buffers are recommended. Here, we designed a rapid direct PCR method utilizing a non-FTA card, Oral Cell Sampling Kit, by omitting the pretreatment step involving Prep-n-Go™ Buffer, and it showed compatibility with the GlobalFiler™ Express PCR Amplification Kit, GlobalFiler™ PCR Amplification Kit, and PowerPlex^® Fusion system. To optimize the PCR conditions, we tested the method with different final PCR volumes and cycles. Finally, we conducted a performance test using 50 Korean buccal samples and confirmed the high performance of the method, detecting more than 90% of the samples with full profiles when using GlobalFiler™ PCR Amplification Kit and PowerPlex^® Fusion system at 29 cycles in a 10 μL final PCR volume. Thus, we report a simple direct PCR set-up to analyze reference samples collected using a non-FTA card manufactured in Korea.     

Whole Plastome Sequences of Two Drug-Type Cannabis: Insights Into the Use of Plastid in Forensic Analyses

DNA is one of the fastest growing tools in forensic sciences, increasing reliability in forensic reports and judgments. The use of DNA has increased in different areas of the forensic sciences, such as investigation of plant species, where plastid DNA has been used to elucidate and generate evidence in cases of traceability of genetically modified and controlled plants. Even with several advances and the practice of using DNA in forensic investigations, there are just few studies related to the identification of genetic tools for the characterization of drug and nondrug-types of Cannabis. Herein, the whole plastomes of two drug-type Cannabis are presented and have their structures compared with other Cannabis plastomes deposited in the GenBank, focusing in the forensic use of plastome sequences. The plastomes of Cannabis sativa “Brazuka” and of the hybrid Cannabis AK Royal Automatic presented general structure that does not differs from the reported for other C. sativa cultivars. A phylogenomic analyses grouped C. sativa “Brazuka” with the nondrug C. sativa cultivars, while the hybrid Cannabis AK Royal Automatic placed isolated, basal to this group. This suggests that the analysis of plastomes is useful toward genetic identification of hybrids in relation to C. sativa.     

Fatal Methemoglobinemia Due to Acute Inhalation of Methyl Nitrite in an Industrial Accident

Methyl nitrite is suggested to cause methemoglobinemia by generating methemoglobin, which may be lethal when the methemoglobin concentration exceeds 70%. However, intoxication with methyl nitrite is seldom reported compared with that with other nitrites. Here, we present an industrial accident involving methyl nitrite inhalation during its synthesis process that resulted in three fatalities and one survivor. The autopsy revealed conspicuous blue-gray discoloration in various parts of the body, including the skin, airway mucosa, vessels, brain, heart, and among other areas. The toxicological tests on the deceased showed methemoglobin concentrations in the blood over the lethal level and increased nitrite ion levels in the blood, gastric contents, liver, and lung tissue compared with those in control samples. The cause of death was determined to be methemoglobinemia-induced hypoxia due to methyl nitrite inhalation. This report provides evidence that in methyl nitrite intoxication, exposure duration has a significant influence on the postmortem changes and likelihood of a fatal outcome may be related to the age of the victim. More attention is required regarding the industrial hazards of this substance.     

A Census of Medicolegal Death Investigation in the United States: A Need to Determine the State of our Nation’s Toxicology Laboratories and Their Preparedness for the Current Drug Overdose Epidemic

In 2007, the Bureau of Justice Statistics reported on 2004 data collected from the Census of Medical Examiner and Coroner Offices (CMEC). The CMEC was one of the first comprehensive reports on the state of the medicolegal death investigation system in the United States and included information on administration, expenditure, workload, specialized death investigations, records and evidence retention, and resources. However, the report did not include responses on questions that were related to toxicology such as specimen retention and type of testing. The purpose of this publication is to provide the community with toxicology laboratory-specific responses from nearly 2000 medical examiner and coroner (MEC) offices. Data obtained from a BJS CMEC public use dataset for any remaining information that was not reported in the 2007 BJS report were evaluated specific to the operation of toxicology laboratories within a MEC office or specific to toxicology testing. The CMEC includes information on average operating budget for MEC offices with internal or external toxicology services, budget for toxicology/microbiology services, respondents’ routine uses of toxicology analysis, toxicology specimen retention time, average turnaround times, use of computerized information management systems, and participation in federal data collections. These historical data begin to address the present state of our nation’s toxicology laboratories within the medicolegal death investigation system and their preparedness for the current drug overdose epidemic.