The use of liquid latex as a pre-treatment to recover debris-covered latent fingerprints from exterior surfaces of vehicles

This study evaluated the effectiveness of using liquid latex as a pre-treatment for fingerprint recovery from the exterior surfaces of vehicles in summer. The sample of this study was 540 sebaceous latent fingerprints deposited on the lower body of three vehicles. Thirty control and thirty experimental fingerprints were deposited on each vehicle, and the experiment was repeated three times. The three vehicles were driven daily for either 2, 3, or 4 weeks after the deposition of fingerprints. After the vehicles reached their designated debris accumulation duration, the latent fingerprints in the control groups were developed with black fingerprint powder. Liquid latex was applied onto the fingerprints in the experimental groups, and they were subsequently developed with black fingerprint powder. A chi-sure test indicated that there was a significant difference in fingerprints recovery performance between two methods (X² = 4.903, d.f. = 1, p = 0.027). An odds ratio test indicated the control method increases the probability of fingerprint recovery by 1.54 times. A Fisher's exact test was used to evaluate the quality of fingerprints recovered from both methods and it indicated that there is no significant difference in quality using the two methods (p = 0.058). This study indicated that the traditional fingerprint powder method performed better for fingerprint recovery from exterior surfaces of vehicles in summer.     

Collecting touch DNA from glass surfaces using different sampling solutions and volumes: Immediate and storage effects on genetic STR analysis

Touch DNA has become increasingly important evidence in todays' forensic casework. However, due to its invisible nature and typically minute amounts of DNA, the collection of biological material from touched objects remains a particular challenge that underscores the importance of the best collection methods for maximum recovery efficiency. So far, swabs moistened with water are often utilized in forensic crime scene investigations for touch DNA sampling, even though an aqueous solution provokes osmosis, endangering the cell's integrity. The aim of the research presented here was to systematically determine whether DNA recovery from touched glass items can be significantly increased by varying swabbing solutions and volumes compared with water-moistened swabs and dry swabbing. A second objective was to investigate the possible effects of storage of swab solutions prior to genetic analysis on DNA yield and profile quality when stored for 3 and 12 months, as is often the case with crime scene samples. Overall, the results indicate that adapting volumes of the sampling solutions had no significant effect on DNA yield, while the detergent-based solutions performed better than water and dry removal, with the SDS reagent yielding statistically significant results. Further, stored samples showed an increase in degradation indices for all solutions tested, but no deterioration in DNA content and profile quality, allowing for unrestricted processing of touch DNA samples stored for at least 12 months. One further finding was a strong intraindividual change in DNA amounts observed over the 23 deposition days which may be related to the donor's menstrual cycle.     

The detection of metallic residues in skin stab wounds by means of SEM-EDS: A pilot study

The morphological analysis of stab wounds may often not be accurate enough to link it with the type of wounding weapon, but a further evaluation may be performed with the search for metallic residues left during the contact between the instrument and the skin. In this study, Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS) was applied to the study of cadaveric stab wounds performed with kitchen knives composed of iron, chromium and nickel, in order to verify the presence of metallic residues on the wound's edge. Two groups of 10 corpses were selected: group A, including victims of stab wounds and a control group B (died of natural causes). Samplings were performed on the lesions and in intact areas of group A, whereas in group B sampling were performed in non-exposed intact skin. Samples were then analysed with optical microscopy and SEM-EDS. In group A, optical microscopic analysis showed the presence of vital haemorrhagic infiltration, while SEM-EDS showed evidence of microscopic metal traces, isolated or clustered, consisting of iron, chromium and nickel. Moreover, in two cases organic residues of calcium and phosphate were detected, as a probable sign of bone lesion. Control samples (group A in intact areas and group B), were negative for the search of exogenous material to optical microscopy and SEM-EDS. The results show the utility and possible application of the SEM-EDS in theidentification of metallic residues from sharp weapons on the skin.     

Nitrous Oxide Determination in Postmortem Biological Samples: A Case of Serial Fatal Poisoning in a Public Hospital*

Abstract: In a public hospital, eight cases of fatal poisoning by nitrous oxide (N₂O) occurred under oxygen administration, due to an erroneous swapping of the lines in the gas system. The aim of the study was to clarify the factors involved in asphyxia by characterizing gases from different lines and measuring N₂O concentrations in postmortem biological samples from bodies exhumed. Analyses carried out on the gas system confirmed the erroneous substitution of O₂ line with N₂O and air line with O₂. Consequently, high N₂O amounts were revealed in several tissues and gaseous biological samples. All specimens were analyzed by headspace gas chromatography technique. A rigorous quantitative analysis was possible only in blood (11.29–2152.04 mg/L) and urine (95.11 mg/L) and in air samples from stomach and trachea (from 5.28 to 83.63 g/m³). This study demonstrates that N₂O can be detected in biological samples even 1 month after death.     

Photogrammetry vs CT Scan: Evaluation of Accuracy of a Low-Cost Three-Dimensional Acquisition Method for Forensic Facial Approximation

Photogrammetry is a three-dimensional acquisition method potentially applicable to the forensic field. This possibility requires the verification of its accuracy. In this study, 3D volumes of skulls are generated to compare the photogrammetry versus the CT scan. In order to provide eligible material to the photogrammetric software, photographs were captured at a distance of 30 cm from the skull placed on a support 1 m in height and illuminated with diffused laboratory ceiling artificial light. A Nikon Coolpix P7100 camera was used. Photographs capture common elements with the previous and the next photograph so as to allow the photogrammetric software to recognize these common points between photographs and create a 3D puzzle. The Zephyr Lite (3DFlow©) software was employed to register the 3D volume. CT-based skulls are taken as a metric reference. The photogrammetry-based skulls are then enlarged according to the measurements of some landmarks or Zygion and Zygion, the distance between end of nasal and base of nasal pyramid for frontal projection, and minimum breadth of the mandibular ramus for the right lateral projection. The accuracy of the photogrammetry is compared to that of the CT scan by measuring the 3D volumes of the skulls studied. Specific landmarks are used as reference points for the measures in both frontal and lateral views. Bland–Altman graph shows homogeneity. The mean difference (1.28 mm) indicates that the measurements taken on the photogrammetry-based skull tend to slightly overestimate compared with the measurements taken on the CT-based skull.     

‘De-pastoralisation’ in Uganda's Northeast: from livelihoods diversification to social differentiation

ABSTRACT

Over the past two generations, livestock loss and hunger, caused by violent conflict and drought, have driven many transhumant agro-pastoralists living in central Karamoja to resettle in unpopulated areas more suitable for agricultural production. These areas, mostly located in the southern and western parts of the region, were historically used by herders as dry season grazing rangelands, while they presently house permanent settlements populated by now sedentarised ‘marginal farmers’, town-based workers and patriarchal elites. In this article, I advance the concept of ‘de-pastoralisation’ to explain the process of dispossession of the major means of social reproduction, which causes an increase in livelihoods diversification and in social differentiation. Through the concept of de-pastoralisation, this article aims to investigate the historical dissolution of pastoralism and its socio-economic consequences, characterised by exploitative inter and intra household relations of production, leading to processes of general proletarianisation and male elite accumulation that reproduce inequality over time.     

Comparative Assessment of a Novel Photo‐Anthropometric Landmark‐Positioning Approach for the Analysis of Facial Structures on Two‐Dimensional Images

Positioning landmarks in facial photo‐anthropometry (FPA) applications remains today a highly variable procedure, as traditional cephalometric definitions are used as guidelines. Herein, a novel landmark‐positioning approach, specifically adapted for FPA applications, is introduced and, in particular, assessed against the conventional cephalometric definitions for the analysis of 16 landmarks on ten frontal images by two groups of examiners (with and without professional knowledge of anatomy). Results showed that positioning reproducibility was significantly better using the novel method. Indeed, in contrast to the classic approach, very low landmark dispersions were observed for both groups of examiners, which were usually below the strictest clinical standards (i.e., 0.575 mm). Furthermore, the comparison between the two groups of examiners highlighted higher dispersion consistencies, which supported a higher robustness. Thus, the use of an adapted landmark‐positioning approach proved to be highly advantageous in FPA analysis and future work in this field should consider adopting similar methodologies.     

Financing knowledge-intensive enterprises: evidence from CVCs in the US

Since the 1990s, the importance of corporate venture capital (CVC) programs has grown around the world. CVCs are investments that established firms make in entrepreneurial companies. At the most basic level, CVC describes an equity investment made by a corporation or its investment entity in a high growth, high potential, privately held business. There is no systematic evidence that corporate venture capital investments create value for the investing firms. Firm value, however, can be created as a result of other benefits from investing (e.g., accessing a new technology). These considerations can explain why many firms currently choose to operate venture units: They have recognized the importance of CVC for strategic innovation in addition to its potential to generate financial returns. Some evidence from the US context described in this paper supports this intuition.     

Sex Assessment from the Volume of the First Metatarsal Bone: A Comparison of Linear and Volume Measurements

Sexual dimorphism is a crucial characteristic of skeleton. In the last years, volumetric and surface 3D acquisition systems have enabled anthropologists to assess surfaces and volumes, whose potential still needs to be verified. This article aimed at assessing volume and linear parameters of the first metatarsal bone through 3D acquisition by laser scanning. Sixty‐eight skeletons underwent 3D scan through laser scanner: Seven linear measurements and volume from each bone were assessed. A cutoff value of 13,370 mm³ was found, with an accuracy of 80.8%. Linear measurements outperformed volume: metatarsal length and mediolateral width of base showed higher cross‐validated accuracies (respectively, 82.1% and 79.1%, raising at 83.6% when both of them were included). Further studies are needed to verify the real advantage for sex assessment provided by volume measurements.