Nondestructive Differentiation of Polyester Single White Fibers Using Synchrotron Radiation Microbeam X-ray Fluorescence Spectrometry with Vertical Focusing

In this study, the nondestructive differentiation of individual white polyester clothing fibers was accomplished via synchrotron radiation microbeam X-ray fluorescence (SR-μ-XRF) analysis. SR-μ-XRF with vertical focusing is a useful nondestructive method for the analysis of a single polyester clothing fiber. Kirkpatrick–Baez (KB) mirror was used to vertically focus 20 keV X-rays for the analysis of 22 individual white polyester fibers taken from clothing commonly sold in Japan. SR-μ-XRF with a vertical focused 2 μm (V) × 300 μm (H) beam was approximately 12.8 times more sensitive than SR-XRF with an unfocused 300 μm (V) × 300 μm (H) beam for the detection of elements in single fibers. The minimum detection limits (MDLs) of the SR-μ-XRF method were 8.15 ppm for Cl and 0.06 ppm for Br. In addition to Ti in TiO₂ delustering agents, Zr and Nb impurities in the delustering agents were detected in individual fibers. Sb from a polymerization catalyst and Co from a transesterification catalyst were also detected in individual fibers. Comparing the Ti K_β/Sb L_α,β and Zr K_α/Nb K_α X-ray intensity ratios was a useful way to distinguish individual clothing fibers, and 98% of the fibers were differentiated when additional trace elements were used as discrimination indicators.     

Examination of Hacking and Blunt Force Skeletal Trauma

Hacking trauma is prevalent in forensic cases involving genocide and dismemberment, but research into the identification of this type of trauma is lacking. The present study examines characteristics of hacking and blunt force skeletal trauma in order to determine if there is a point at which blunt force trauma becomes distinguishable from hacking trauma. Ten implements with a range of blade angles (i.e., the striking surface of the implement) were used in conjunction with a controlled-force hacking device to impact 100 limb bones of white-tailed deer (Odocoileus virginianus). Observations of the trauma included the occurrence and degree of fragmentation, the entrance widths of the impacts, and composite scores of six hacking characteristics, especially the distinctive V-shaped kerf. ANOVA tests and regression analyses were used to assess the relationships between these characteristics and the blade angles. A significant relationship (p-value = 0.011) was found between the composite hacking scores and the blade angles, indicating that blunt force and hacking trauma can be distinguished. The entrance widths of the impacts exhibited a significant relationship with the blade angles (p-value = 0.037). There was also a significant relationship between the visibility of a V-shaped kerf in the bones (p-value = 0.003), with visibility decreasing around the 60° blade angle. These data should assist in establishing guidelines to differentiate hacking and blunt force skeletal trauma in cases where the implement is on a spectrum between sharp and blunt.     

Single Nucleotide Polymorphism Assay for Genetic Identification of Lophophora williamsii*

Lophophora is a member of the Cactaceae family, which contains two species: Lophophora williamsii and L. diffusa. Lophophora williamsii is an illegal plant containing mescaline, a hallucinogenic alkaloid. In this study, a novel method based on a single nucleotide polymorphism (SNP) assay was developed for identifying L. williamsii; this assay reliably detects SNPs within chloroplast DNA (rbcL, matK, and trnL-trnF IGS) and was validated for identifying Lophophora and L. williamsii simultaneously. The chloroplast DNA sequences from four L. williamsii and three L. diffusa plants were obtained and compared using DNA sequence data from approximately 300 other Cactaceae species available in GenBank. From this sequence data, a total of seven SNPs were determined to be suitable for identifying L. williamsii. A multiplex assay was constructed using the ABI PRISM^® SNaPshot™ Multiplex Kit (Applied Biosystems, Forster City, CA) to analyze species-specific SNPs. Using this multiplex assay, we clearly distinguished the Lophophora among 19 species in the Cactaceae family. Additionally, L. williamsii was distinguished from L. diffusa. These results suggest that the newly developed assay may help resolve crimes related to illegal distribution and use. This multiplex assay will be useful for the genetic identification of L. williamsii and can complement conventional methods of detecting mescaline.     

Combined Collection and Analysis of Inorganic and Organic Gunshot Residues

Gunshot residue (GSR) analysis and their interpretation provide crucial information on a criminal investigation involving the use of firearms. To date, several approaches have been proposed for the implementation of a combined sampling and analysis of inorganic (IGSR) and organic GSR (OGSR). However, it is not clear at this stage if concurrent analyses of both types of residue might be detrimental to the analysis of IGSR currently applied in forensic laboratories. Thus, this work aims to compare and evaluate three different protocols for the combined collection and analysis of IGSR and OGSR. These methods, respectively, involve the use of a modified stub (with two halves, one for the detection of IGSR and the other for the analysis of OGSR); the sequential recovery of GSR with two stubs mounted with different adhesives (double-sided carbon tape and Tesa® TACK) and the sequential analysis of IGSR and OGSR from a single carbon stub following carbon deposition. The detection of IGSR was carried out using SEM-EDX, while OGSR analysis was performed using ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS). Obtained results for experiments performed using Geco Sinoxid^® ammunition indicated that sequential analysis was the most suitable protocol for the combined collection and analysis of both IGSR and OGSR. A higher number of inorganic (characteristic and consistent) particles and higher concentrations of ethylcentralite, N-nitrosodiphenylamine, diphenylamine, and nitroglycerin were recovered with this method.     

Improved Area of Origin Estimation for Bloodstain Pattern Analysis Using 3D Scanning

An important component of crime scene reconstruction is bloodstain pattern analysis (BPA). Where BPA concerns impact patterns, estimating the area of origin is critical information for scene reconstruction. Traditionally, this is achieved by measuring individual bloodstains and performing trigonometric calculations; however, 3D scanning has been proposed as a viable alternative for overcoming logistical and practical concerns with the manual method. Therefore, this project aimed to establish whether the FARO Focus 3D scanner and FARO Zone 3D software can improve the accuracy of area of origin estimates relative to the manual method. We created a series of eight bloodstain impact patterns and performed paired analysis using the two methods to estimate areas of origin for each pattern. Our data suggested that FARO-derived estimates were generally more accurate than using the manual method. FARO-estimated heights of origin areas were generally closer to the true distance. Both methods underestimated the distance from the wall for most patterns originating 150mm or greater from the wall, but overestimated distances for patterns originating closer to the wall. The degree to which distances were underestimated increased significantly the further the blood source was from the wall and was greater for FARO-derived estimates. The results of this research contribute to the validation of these instruments for operational implementation for BPA and should be considered alongside the practical benefits of 3D scanning relative to manual methods. Further, 3D scanning can provide reliable BPA reconstruction documentation for technical review and court presentation.     

Evaluation of Suspected Counterfeit Pharmaceutical Tablets Declared to Contain Controlled Substances Using Handheld Raman Spectrometers

This study describes the performance of handheld Raman devices for determining whether suspect pharmaceutical tablets declared to contain controlled substances were consistent with authentic (CWA) or not consistent with authentic (NCWA) tablets using a simple, rapid, field-friendly method capable of being used by nonexperts. Twenty-five authentic products and 84 known NCWA tablets were examined using three “parent” devices for a total of 327 analyses. On average, the parent devices yielded a true pass rate of 100%, a true fail rate of 98.4%, a false pass rate of 1.6%, and a false fail rate of 0%. The methods/libraries were then transferred to 13 identical “daughter” devices, which were used to examine 10 suspect finished dosage forms in duplicate (six known NCWA tablets and four authentic tablets) for a total of 260 measurements. On average, the daughter devices had a true pass rate of 100%, a true fail rate of 95.5%, a false pass rate of 4.5%, and a false fail rate of 0.0%. These data demonstrate that the parent–daughter electronic transfer method was successful, which permits the ability to develop methods in the laboratory that can be seamlessly pushed out to field devices. The methods can then be used to (i) prioritize samples for additional testing using other more time-consuming laboratory-based techniques needed to detect and quantify active ingredients and (ii) help support the interdiction of dangerous tablets at ports of entry, thereby preventing them from reaching the supply chain.     

Evaluating the Potential for Unintentional Occupational Exposure to Fentanyl and Fentanyl Analogues Among Medicolegal Death Investigators and Autopsy Technicians

Recent increases in deaths in the United States from synthetic opioids such as fentanyl and fentanyl analogues (fentanyls) have raised concerns about possible occupational exposures to these potent agents. Medicolegal death investigators and autopsy suite staff might perform job tasks involving exposure to fentanyls. The potential for exposure to fentanyls among medicolegal death investigators and autopsy technicians at a state medical examiner's office was evaluated through review of caseload characteristics, injury and illness logs, and procedures and policies and discussions with management and employee representatives. The evaluation showed that this medical examiner's office had low potential for work-related exposure to fentanyls; its standard operating procedures and personal protective equipment requirements should reduce the potential for occupational exposure. Medicolegal death investigation agencies can develop and implement guidance to control exposures and provide workforce education and training to reduce the potential for work-related exposure to fentanyls.     

Reassembling Linux-based Hybrid RAID

Network-attached storage (NAS) is a system that uses a redundant array of disks (RAID) to create virtual disks comprising multiple disks and provide network services such as FTP, SSH, and WebDAV. Using these services, the NAS's virtual disks store data about individuals or groups, making them a critical analysis target for digital forensics. Well-known storage manufacturers like Seagate, Synology, and NETGEAR use Linux-based software RAID, and they usually support Berkeley RAID (e.g., RAID 0, 1, 5, 6, and 10) as well as self-developed hybrid RAID. Those manufacturers have published data on the introduction and features of hybrid RAID, but there is not enough information to reassemble RAID from a digital forensic perspective. Besides, digital forensic tools (such as EnCase, FTK, X-ways, and RAID Reconstructor) do not support automatic RAID reassembly for hybrid RAID, so research on hybrid RAID reassembly methods is necessary. This paper analyzes the disk array composed of hybrid RAID and explains the layout of disk array, partition layout in hybrid RAID, and hybrid RAID configuration strategy. Furthermore, it suggests parameters that are required for RAID reassembly and then propose a hybrid RAID reassembly procedure using them. Finally, we propose a proof-of-concept tool (Hybrid RAID Reconstructor) that identifies hybrid RAID from disk array and parse RAID parameters.     

Sudden Death Caused by Rupture of Spontaneous Ductus Arteriosus Aneurysm in an Adult

A 55-year-old man complained of sudden onset of severe neck pain. This was followed by prompt loss of consciousness and death. Autopsy revealed rupture of a saccular aneurysm, which was considered to have resulted from enlargement of the remaining ductal tissue, and was located on the medial aspect of the uppermost portion of the descending aorta. Dense blood extravasation was noted in the posterior mediastinum and extending to the strap muscles of the neck and larynx. Histological examination of the rupture site revealed disappearance of the medial elastic fibers and thickened intima covered with dense fibrous tissue. Spontaneous ductus arteriosus aneurysm in adults is a rare finding, but widespread use of imaging technologies has revealed that it develops more frequently than previously recognized. Fatal complications may occur even when the aneurysm is relatively small. Therefore, pathologists should be aware of this aneurysm as a potential cause of sudden death.     

A Census of Medicolegal Death Investigation in the United States: A Need to Determine the State of our Nation’s Toxicology Laboratories and Their Preparedness for the Current Drug Overdose Epidemic

In 2007, the Bureau of Justice Statistics reported on 2004 data collected from the Census of Medical Examiner and Coroner Offices (CMEC). The CMEC was one of the first comprehensive reports on the state of the medicolegal death investigation system in the United States and included information on administration, expenditure, workload, specialized death investigations, records and evidence retention, and resources. However, the report did not include responses on questions that were related to toxicology such as specimen retention and type of testing. The purpose of this publication is to provide the community with toxicology laboratory-specific responses from nearly 2000 medical examiner and coroner (MEC) offices. Data obtained from a BJS CMEC public use dataset for any remaining information that was not reported in the 2007 BJS report were evaluated specific to the operation of toxicology laboratories within a MEC office or specific to toxicology testing. The CMEC includes information on average operating budget for MEC offices with internal or external toxicology services, budget for toxicology/microbiology services, respondents’ routine uses of toxicology analysis, toxicology specimen retention time, average turnaround times, use of computerized information management systems, and participation in federal data collections. These historical data begin to address the present state of our nation’s toxicology laboratories within the medicolegal death investigation system and their preparedness for the current drug overdose epidemic.