Municipal Default Patterns: An Historical Study

The incidence of municipal default is closely related to the business cycles in this country. During national depressions nearly all sectors and regions experience defaults, although not with equal severity. Regional borrowing behavior during the boom years preceding depression determines which regions will be most severely affected by national depression. The history of state and local borrowing is briefly surveyed with attention to four major periods of economic expansion and the national depressions that followed. Regional development cycles are then reviewed with a focus on several cases: special district defaults both at the turn of the century and today; Detroit at the beginning of the automobile industry; and Florida in the 1920s. New York City and Cleveland are analyzed in the context of urban crises. Revenue bond defaults, including toll roads and the Washington Public Power and Supply System (WPPSS) are analyzed for special recurring patterns.     

Microchip-based cell lysis and DNA extraction from sperm cells for application to forensic analysis

The current backlog of casework is among the most significant challenges facing crime laboratories at this time. While the development of next-generation microchip-based technology for expedited forensic casework analysis offers one solution to this problem, this will require the adaptation of manual, large-volume, benchtop chemistry to small volume microfluidic devices. Analysis of evidentiary materials from rape kits where semen or sperm cells are commonly found represents a unique set of challenges for on-chip cell lysis and DNA extraction that must be addressed for successful application. The work presented here details the development of a microdevice capable of DNA extraction directly from sperm cells for application to the analysis of sexual assault evidence. A variety of chemical lysing agents are assessed for inclusion in the extraction protocol and a method for DNA purification from sperm cells is described. Suitability of the extracted DNA for short tandem repeat (STR) analysis is assessed and genetic profiles shown. Finally, on-chip cell lysis methods are evaluated, with results from fluorescence visualization of cell rupture and DNA extraction from an integrated cell lysis and purification with subsequent STR amplification presented. A method for on-chip cell lysis and DNA purification is described, with considerations toward inclusion in an integrated microdevice capable of both differential cell sorting and DNA extraction. The results of this work demonstrate the feasibility of incorporating microchip-based cell lysis and DNA extraction into forensic casework analysis.     

Drug screening and confirmation by GC-MS: comparison of EMIT II and Online KIMS against 10 drugs between US and England laboratories

Drug screening through urinalysis is a widely accepted tool for rapid detection of potential drug use at a relatively low cost. It is, therefore, a potentially useful method for detecting and monitoring drug use in a variety of contexts such as the criminal justice system, pre-employment screening and a variety of treatment centers. This article explores the efficacy of two commercially available drug-screening assays: Online KIMS assay (Roche) and EMIT II assays. First, we evaluate the sensitivity and specificity of two immunoassays. A total of 738 urine samples were collected among adult arrestee populations from Chicago, New Orleans and Seattle through the Arrestee Drug Abuse Monitoring (ADAM) program. Partial samples were split within one laboratory and analyzed by both enzymes multiplied immunoassay technique (EMIT) II and kinetic interaction of microparticle in solution (KIMS) assays for a 10-drug panel (amphetamine, barbiturates, benzodiazepines, marijuana, cocaine, methadone, methaqualone, opiate, phencyclidine and propoxyphene). Gas chromatography-mass spectrometry (GC-MS) was used as a confirmation method for all positives from either EMIT II or KIMS for all experiments. Second, the paper examines whether using different testing laboratories plays a role in the final results. The same experiments were repeated at two different testing locations: one in California and one in London and England. Third, the paper studies whether drug testing results vary between two laboratories when each of them had used their own routine screening method: the Forensic Science Service (FSS) at Birmingham, United Kingdom with KIMS assay and Medscreen Limited at London, United Kingdom with EMIT II. In summary, both EMIT II and KIMS assays generate fairly consistent results. The concordance rate against each of the 10 drugs tested is relatively high (97.4-100%). The discrepancies, in most cases, occurred at drug concentrations near the cut-off levels. There were more discrepant results between two laboratories compared to when specimens were analyzed at the same laboratory using two different assays.     

Use of thermal drone in detection and assessment of larval mass temperature in decomposed rabbit carcasses

Manual ground searches and cadaver dogs are traditional methods for locating remains, but they can be time- and resource-intensive, resulting in the decomposition of bodies and delay in victim identification. Therefore, thermal imaging has been proposed as a potentially useful tool for detecting remains based on their temperature. This study investigated the potential of a novel search technique of thermal drones to detect surface remains through the detection of maggot mass temperatures. Two trials were carried out at Selangor, Malaysia, each utilizing 12 healthy male Oryctolagus cuniculus European white rabbits and DJI Matrice 300 RTK drone China, equipped with a thermal camera; Zenmuse H20T to record the thermal imaging footage of the carcasses at various heights (15, 30, 60–100 m) for 14 days for each trial. Our results demonstrated that the larval masses and corresponding heat emissions were at their largest during the active decay stage; therefore, all the carcasses were observable in thermal images on day 5 and remained until day 7. Statistical analyses showed that (1) no statistically significant differences in thermal images between clothed and unclothed subjects (p > 0.05); (2) 15 m above ground level was proven to be the optimal height, as it showed the greatest contrast between the carcass heat signature and the background (p < 0.005). Our data suggested the potential window of detection of thermal signatures was detectable up to 7 days post-deposition. This could be an important guideline for the search and recovery teams for operational implementation in this tropical region.     

Experimental results on data analysis algorithms for extracting and interpreting edge feature data for duct tape and textile physical fit examinations

A physical fit is an important observation that can result from the forensic analysis of trace evidence as it conveys a high degree of association between two items. However, physical fit examinations can be time-consuming, and potential bias from analysts may affect judgment. To overcome these shortcomings, a data analysis algorithm using mutual information and a decision tree has been developed to support practitioners in interpreting the evidence. We created these tools using data obtained from physical fit examinations of duct tape and textiles analyzed in previous studies, along with the reasoning behind the analysts' decisions. The relative feature importance is described by material type, enhancing the knowledge base in this field. Compared with the human analysis, the algorithms provided accuracies above 90%, with an improved rate of true positives for most duct tape subsets. Conversely, false positives were observed in high-quality scissor cut (HQ-HT-S) duct tape and textiles. As such, it is advised to use these algorithms in tandem with human analysis. Furthermore, the study evaluated the accuracy of physical fits when only partial sample lengths are available. The results of this investigation indicated that acceptable accuracies for correctly identifying true fits and non-fits occurred when at least 35% of a sample length was present. However, lower accuracies were observed for samples prone to stretching or distortion. Therefore, the models described here can provide a valuable supplementary tool but should not be the sole means of evaluating samples.     

Protecting Rural Church-Going Immigrant Women from Family Violence

Rural Latino immigrant women at risk of family violence may perceive churches as their only source of help. However, immigrant church leaders may be poorly equipped to address family violence in their congregations. This article describes a project designed to stimulate and support appropriate responses to family violence by rural immigrant churches, including those identified with conservative theological views on women. The primary goal was to provide rural Latino church leaders with culturally sensitive materials and resources they were willing to use with their congregations. We collaborated with local service providers who assisted in recruiting the church leaders for the pastors’ workshops where the resource materials were presented. Survey data indicated most of the pastors were receptive to the content and planned to incorporate it into their church work. Suggestions are made for future research on this culturally sensitive approach to addressing family violence in the immigrant community.     

Do bone elasticity and postmortem interval affect forensic fractographic analyses?

Forensic fractographic features of bone reliably establish crack propagation in perimortem injuries. We investigated if similar fracture surface features characterize postmortem fractures. Experimentally induced peri- and postmortem fractures were used to assess if fractographic features vary as bone elasticity decreases during the postmortem interval (PMI). Thirty-seven unembalmed, defleshed human femoral shafts from males and females aged 33–81 years were fractured at varying PMIs with a drop test frame using a three-point bending setup and recorded with a high-speed camera. Vital statistics, cause of death, PMI length, temperature, humidity, collagen percentage, water loss, fracture energy, and fractography scores were recorded for each sample. Results showed that fractographic features associated with perimortem fractures were expressed in PMIs up to 40,600 accumulated degree hours (ADH), or 60 warm weather days. Hackle was the most consistently expressed feature, occurring in all fractures regardless of ADH. The most variable characteristics were wake features (78.4%) and arrest ridges (70.3%). Collagen percentage did not correlate strongly with ADH (r = −0.04, p = 0.81); however, there was a strong significant correlation between ADH and water loss (r = 0.74, p < 0.001). Multinomial logistic regression showed no association between fractographic feature expression and ADH or collagen percentage. In conclusion, forensic fractographic features reliably determine initiation and directionality of crack propagation in experimentally induced PMIs up to 40,600 ADH, demonstrating the utility of this method into the recent postmortem interval. This expression of reliable fractographic features throughout the early PMI intimates these characteristics may not be useful standalone features for discerning peri- versus postmortem fractures.     

Discrimination of phenethylamine regioisomers and structural analogues by Raman spectroscopy

In this study, the Raman spectra of 21 phenethylamines were obtained using far‐red excitation (785 nm). The distinguishing ability of Raman for phenethylamines, especially for phenethylamine regioisomers and structural analogues, was investigated. Here, the evaluation of a cross section of Raman spectra demonstrated that all types of phenethylamines were distinguishable, even for certain structural analogues with high spectrum similarity. Raman exhibited high distinguishing ability for phenethylamine regioisomers that differ in the substitution position of halogen, methoxy, alkyl, or other substituted groups; as well as for structural analogues containing different groups, such as furanyl, 2,3‐dihydrofuranyl, halogen, and alkyl substituted at the same position. The Raman spectra for homologues with differences in only a methyl group were found to be highly similar; however, their spectra demonstrated small but detectable differences. Four analogue mixtures and 59 seized samples were also analyzed to study the practical use of the Raman method in forensic field. 95% of the seized samples were correctly identified, which significantly validated the ability of Raman method in identifying the correct isomers. Accordingly, this study provides a non‐destructive, high‐throughput and minimal sample preparation technique for the discrimination of phenethylamines.     

The use of serum protein analysis in the diagnosis of fatal envenomation via Crotalus horridus (timber rattlesnake)

Deaths occurring due to rattlesnake envenomization are extremely rare and must be thoroughly investigated in the same manner as any other type of death. Our research presents the case of an adult white male who suffered a fatal timber rattlesnake (Crotalus horridus) envenomation in northwest Florida in 2018. Blood samples were taken from the decedent's heart and vasculature of the chest and sent for serum proteomic analysis. Serum proteomic analysis was utilized in order to identify proteins from timber rattlesnake (C. horridus) found within the victim's blood. The confirmation of the presence of timber rattlesnake venom within the victim's blood allows the forensic pathologist to determine the cause of death most accurately and likewise, assists with the manner of death determination. Blood samples were separated into two groups: one with the abundant endogenous proteins depleted to facilitate detection of lower abundant proteins and one undepleted. In the depleted sample, a total of 712 proteins were identified, with 47 of the proteins (6.6%) occurring originating from timber rattlesnake (C. horridus). Likewise, a total of 742 proteins were identified in the undepleted sample, with 52 of the proteins (7.0%) occurring in timber rattlesnake (C. horridus). No timber rattlesnake (C. horridus) proteins were found in control human serum.     

Dental hygiene students' matching accuracy when comparing antemortem dental radiographs and oral photographs to simulated postmortem WinID3® odontograms

Matching dental antemortem (AM) and postmortem (PM) data for human identification is especially challenging when the workforce is limited. Dental hygienists have served mass fatality incidents (MFIs) due to dental-related expertise. However, forensics within dental hygiene education and research on transferable skills is limited. This qualitative balance design study assessed senior dental hygiene students' match accuracy of simulated cases varying in dental identifiers based on AM full mouth series (FMS) radiographs and oral photographs to PM WinID3^® odontograms to demonstrate possible disaster victim identification (DVI) transferable skills gained during formal education. A convenience sample of senior dental hygiene students (n = 31) was presented information on WinID3^® interpretation, then presented with 5 mismatched cases and asked to visually interpret each to make 10 total matches; five based on AM FMS with simulated PM WinID3^® odontograms and five based on AM photographs with PM WinID3^® odontograms. Match accuracy scores ranged from 41.9% to 58.1% for cases with 1–10 identifiers, and 77.4% to 93.5% for cases with 11–40 identifiers. Accuracy when matching AM radiographs to PM odontograms versus AM photographs to PM odontograms was compared and revealed no statistical differences in match accuracy depending on image type (p = 0.388 to 1.000). Results of this pilot study suggests transferable match accuracy skills resulted from the participants' dental hygiene formal education. These baseline skills with additional specialized training support the rationale for dental hygienists serving on DVI teams. More research is needed in education and practice when preparing dental hygienists for forensic-based service.