Fatal cranial injuries caused by an electric angle grinder

A case of fatal cranial injuries caused by an angle grinder is reported. The scalp lesions were typical of those produced by a cutting disk in a side-slipping movement. On the cranial vault were two bony losses of substance, one of which was deep enough for intracranial penetration of the disk. Signs of deflection of the disk, identical to those found on the scalp, were observed on the external bony table. Because of the circumstances in which the victim was discovered, in particular the damage to the machine which had a broken handle, and the lack of any indication of homicide or suicide, an accident is the most likely hypothesis.     

Building faces from dry skulls: are they recognized above chance rates?

Methods of facial approximation have successfully aided the identification of deceased individuals. Successes may be due to either accurate facial approximation techniques or chance. This study aims to determine if any of 16 facial approximations, built using standard techniques, are sufficiently accurate to produce correct identifications of target individuals above chance. Four skulls were approximated using four commonly used methods of facial approximation. The resulting 16 facial approximations were judged by 37 assessors of varying ages. Assessors attempted to identify the target individual of each facial approximation from a face pool of ten photographed faces. Only one facial approximation resulted in true positive identification rates above chance at statistically significant levels. It is concluded that it is rare for facial approximations to be sufficiently accurate to allow identification of a target individual above chance. Since 403 incorrect identifications were made out of 592 identification scenarios, facial approximation should be considered to be a highly inaccurate and unreliable forensic technique. These results suggest that facial approximations are not very useful in excluding individuals to whom skeletal remains may not belong. Evidence from this experiment supports suggestions by others that facial approximation should be used in forensic science when all other methods of identification have failed and only to provide tentative identification.     

Delusional misidentification and aggression in Alzheimer's disease

Alzheimer's disease has been associated with serious behavioral disturbances including aggressive behaviors and agitation. Aggression in dementia of the Alzheimer's type may be associated with psychotic symptoms, particularly delusional misidentification phenomena. These phenomena are complex and varied in Alzheimer's disease and so far have been only rudimentarily described. In this paper, we explore the association of delusional misidentification and aggression in an individual suffering from Alzheimer's disease.     

Combined homicide-suicide in Galveston County

Combined homicide-suicides have been classified based on the psychopathology of the perpetrator and the nature of the relationship between perpetrator and victim(s). To further understand the nature of this tragic phenomenon and to test the validity and practicality of a previously suggested classification system, investigators systematically collected data on all combined homicide-suicide events that occurred in Galveston County, Texas over a continuous 18-year period (n = 20). The most common psychopathological finding for perpetrators was high serum alcohol levels that suggested intoxication. Most combined homicide-suicides fell into one of the relational categories and most of these, as predicted, were of the consortial type, possessive subtype. As expected, due to the small sample size, the less common types of combined homicide-suicide were not represented in this sample.     

Validation of short tandem repeats (STRs) for forensic usage: performance testing of fluorescent multiplex STR systems and analysis of authentic and simulated forensic samples

The amplification and typing conditions for the 13 core CODIS loci and their forensic applicability were evaluated. These loci are CSF1PO, FGA, TH01, TPOX, vWA, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, and D21S11. Results were obtained using the multiplex STR systems AmpFlSTR Profiler Plus and AmpFlSTR COfiler (Applied Biosystems, Foster City, CA), GenePrint PowerPlex (Promega Corporation, Madison, WI), and subsets of these kits. For detection of fluorescently labeled amplified products, the ABI Prism 310 Genetic Analyzer, the ABI Prism 377 DNA Sequencer, the FMBIO II Fluorescent Imaging Device, and the Fluorlmager were utilized. The following studies were conducted: (a) evaluation of PCR parameter ranges required for adequate performance in multiplex amplification of STR loci, (b) determination of the sensitivity of detection of the systems, (c) characterization of non-allelic PCR products, (d) evaluation of heterozygous peak intensities, (e) determination of the relative level of stutter per locus, (f) determination of stochastic PCR thresholds, (g) analysis of previously typed case samples, environmentally insulted samples, and body fluid samples deposited on various substrates, and (h) detection of components of mixed DNA samples. The data demonstrate that the commercially available multiplex kits can be used to amplify and type STR loci successfully from DNA derived from human biological specimens. There was no evidence of false positive or false negative results and no substantial evidence of preferential amplification within a locus. Although at times general balance among loci labeled with the same fluorophore was not observed, the results obtained were still valid and robust. Suggested criteria are provided for determining whether a sample is derived from a single source or from more than one contributor. These criteria entail the following: (a) the number of peaks at a locus, (b) the relative height of stutter products, and (c) peak height ratios. Stochastic threshold levels and the efficiency of non-templated nucleotide addition should be considered when evaluating the presence of mixtures or low quantity DNA samples. Guidelines, not standards, for interpretation should be developed to interpret STR profiles in cases, because there will be instances in which the standards may not apply. These instances include (a) a primer binding site variant for one allele at a given locus, (b) unusually high stutter product, (c) gene duplication, and (d) translocation.     

Osler-Weber-Rendu syndrome--pathological manifestations and autopsy considerations

An 18-year-old university student with Osler-Weber-Rendu disease collapsed in the bathroom. Attempted resuscitation was unsuccessful. Her past history included recurrent epistaxes, mucosal telangiectasias, intracranial arteriovenous malformations with previous hemorrhage, a single pulmonary arteriovenous malformation, recent onset of grand mal seizures, and depression. There was a positive paternal family history. At autopsy the pulmonary arteriovenous malformation was confirmed. In addition, within the brain there were widespread areas of gliosis with hemosiderin deposition and small vascular malformations. No other significant abnormalities were detected and toxicological screening revealed only moderately elevated levels of carbemazepine. Death was attributed to epilepsy associated with glial scarring from previous microhemorrhages. The detection of vascular malformations in the lung or brain at autopsy should prompt careful examination of all tissues for similar lesions. Given the possibility of Osler-Weber-Rendu disease in such cases, fibroblast cultures should be undertaken to enable molecular studies to proceed. The heritable nature of this disorder necessitates accuracy of diagnosis at autopsy; once the diagnosis is confirmed family screening should be recommended.     

Processes involved in the development of latent fingerprints using the cyanoacrylate fuming method

Chemical processes involved in the development of latent fingerprints using the cyanoacrylate fuming method have been studied. Two major types of latent prints have been investigated-clean and oily prints. Scanning electron microscopy (SEM) has been used as a tool for determining the morphology of the polymer developed separately on clean and oily prints after cyanoacrylate fuming. A correlation between the chemical composition of an aged latent fingerprint, prior to development, and the quality of a developed fingerprint has been observed in the morphology. The moisture in the print prior to fuming has been found to be more important than the moisture in the air during fuming for the development of a useful latent print. In addition, the amount of time required to develop a high quality latent print has been found to be within 2 min. The cyanoacrylate polymerization process is extremely rapid. When heat is used to accelerate the fuming process, typically a period of 2 min is required to develop the print. The optimum development time depends upon the concentration of cyanoacrylate vapors within the enclosure.     

Glycine toxicity and unexpected intra-operative death

A rare complication of the use of glycine irrigation fluid during prostatic surgery in a 69-year-old man is described. Following cystolithopexy and transurethral resection of the prostate for benign prostatomegaly, abdominal distension developed with increasing ventilatory pressures. Despite retroperitoneal fluid evacuation at subsequent urgent laparotomy, cardiac arrest occurred that was not amenable to resuscitation. At autopsy a traumatic defect in the posterior bladder wall filled with calculus debris was confirmed that did not communicate with the peritoneal cavity. Hyponatremia with markedly elevated levels of blood, urine, and body fluid glycine were demonstrated. Death was, therefore, attributed to glycine toxicity following tracking of glycine through a surgical defect in the posterior bladder wall. Careful dissection of surgical sites is required in such cases to demonstrate any additional trauma that may be associated with the fatal episode. Analysis of body fluids for glycine and electrolytes is also necessary to assist in the determination of possible mechanisms of death.     

Mobile autopsy teams in the investigation of war crimes in Kosovo 1999.

On request of the International Criminal Tribunal for the former Yugoslavia (ICTY), the Danish-Swedish forensic teams worked in Kosovo during the summer and the fall of 1999. The teams worked mainly as "mobile teams" at sites with few graves. Only two larger sites were examined. Most of the bodies were buried separately. A few "multiple burial" graves were examined, but no mass graves were encountered. The main purpose of the autopsies was to establish the cause and manner of death. Identification was of less importance, but a majority of the bodies had been identified prior to the autopsy. A total of 308 bodies, mainly males, were examined. The age varied greatly with a mean age of 47 years. The most common cause of death was gun shot wounds and the most common manner of death was homicide.