Fluorescent TiO2 powders prepared using a new perylene diimide dye: applications in latent fingermark detection

A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.     

Optimisation and evaluation of 1,2-indanedione for use as a fingermark reagent and its application to real samples

1,2-indanedione is an emerging fingermark reagent used on porous surfaces. The general consensus is that this reagent is at least as sensitive as DFO, with some research showing higher sensitivity for 1,2-indanedione as opposed to DFO. However, a number of discrepancies existed in the literature as to which formulation and which development procedure produces optimal results. This project set out to investigate the best formulation and development procedure under Australian conditions, encompassing all published recommendations as well as some novel approaches. 1,2-indanedione formulations were compared with respect to initial colour, fluorescence, concentration of reagent, acetic acid concentration, and the effect of different carrier solvents. Numerous development conditions were investigated, including a conventional oven, a heat press and humidity. Further enhancement using metal salt treatment and liquid nitrogen was also evaluated. The heat press set at 165 degrees C for 10s proved to give the best initial colour and most intense luminescence. Secondary metal salt treatment improved initial colour and luminescence. The Polilight, the VSC 2000, and the Condor Chemical Imaging macroscope have been used to detect the fingerprints developed with 1,2-indanedione on a variety of high- and low-quality porous and semi-porous surfaces, with impressive results overall. Laboratory and field tests were conducted to compare 1,2-indanedione with DFO and ninhydrin as well as to investigate the position of 1,2-indanedione in the sequence of reagents for fingermark detection on porous surfaces. Overall, 1,2-indanedione proved to be a viable alternative to traditional methods for the detection of fingermarks on porous surfaces, with more fingermarks being developed using this reagent on real samples than both DFO and ninhydrin and a combination of the two reagents.     

The population of coloured textile fibres in domestic washing machines.

A population survey was carried out to analyse examples of the coloured fibre population that may be expected to exist in both front- and top-loading domestic washing machines during Spring, in Sydney, Australia. White cotton T-shirts were washed both individually, and with a normal household wash load, then taped to recover extraneous fibres transferred during the wash cycle. Twelve thousand one hundred and seventy-eight fibres were classified according to length, colour and generic class. Cotton fibres were most prevalent (69.4%), followed by man-made fibres (24.2%). The most common colour/generic class combinations were black/grey cotton (27%), blue cotton (20%) and red cotton (15.6%). Other combinations generally represented under 2% of the total fibre population. Two thirds (65.9%) of the recovered fibres were under 2 mm in length, the proportion of fibres decreasing with increasing fibre length. Variations in machine type did not affect the distribution of fibres with respect to fibre type, colour or length.     

Investigation of hydrogen cyanide generation from the cyanoacrylate fuming process used for latent fingermark detection

Cyanoacrylate fuming is one of the most common techniques employed for the detection of latent fingermarks on non-porous surfaces such as plastic and glass. The technique is generally applied by exposing items of interest to the vapours generated by heating a suitable quantity of commercial cyanoacrylate adhesive. In this study, the potential for highly toxic hydrogen cyanide (HCN) to be generated from the overheating of cyanoacrylate was investigated. Two commercial cyanoacrylate adhesives and two quantitative methods for the determination of HCN were employed: (i) the sodium picrate method; and (ii) the picrate-resorcinol method. (13)C nuclear magnetic resonance (NMR) analysis was used to confirm the presence of cyanide. In addition, the thermal decomposition of cyanoacrylate was studied using simultaneous thermogravimetric and differential thermal analysis (TGA-DTA). It was determined that detectable and quantifiable amounts of HCN were generated from the thermal decomposition of cyanoacrylate monomer and polymer at temperatures as low as 200 °C. Using an optimised picrate-resorcinol method, it was shown that around 10 μg of HCN could be generated from the heating of 1g of cyanoacrylate monomer at 200 °C. For one of the adhesives tested, this increased to above 100 μg of HCN when 1g of cyanoacrylate monomer was heated at 280 °C. Recommendations are provided that, if followed, should ensure that the cyanoacrylate fuming process can be safely applied with minimal risk to the operator.     

Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er,Yb up-converter particles

This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.     

Methods for the enhancement of fingermarks in blood

Fingermarks formed in or by blood often require specific development techniques. This review examines techniques and materials that may be used to enhance and record fingermarks deposited in blood or fingermarks generated by blood-contaminated papillary ridges. A large number of techniques are presented here and are discussed from a chemical as well as practical perspective. It is concluded that an optimized sequence of techniques targeting both latent (non-bloody) and bloody fingermarks must be applied to detect and enhance the maximum number of marks, and therefore optimize the information content from exhibits that may bear marks in blood.     

Styryl dye coated metal oxide powders for the detection of latent fingermarks on non-porous surfaces

Conventional fingermark powders rely on contrast induced by absorption/reflection (e.g. black powder) or luminescence in the visible region (e.g. Blitz Green(?)). In most cases, these powders provide sufficient contrast; however, in some circumstances surface characteristics can interfere with the visualisation of powdered fingermarks. Visualisation in the near infra-red (NIR) region, however, has been shown to eliminate interferences commonly encountered in the visible region. In this study, a mixture of rhodamine 6G and the NIR laser dye styryl 11 (STaR 11) was coated onto an aluminium oxide nanopowder and then mixed with silver magnetic powder to develop and visualise fingermarks in the NIR. When compared to Blitz Green(?), it was determined that the STaR 11 magnetic powder was better suited for marks deposited on textured surfaces and for older marks, whereas Blitz Green(?) performed better on smooth glossy surfaces. The ability of the STaR 11 mixed dye formulation to be visualised in both the visible and NIR regions also provides a significant advantage over conventional luminescent fingermark powders.     

The Kodak Syndrome: Risks and Opportunities Created by Decentralization of Forensic Capabilities

Forensic science laboratories are being challenged by the expanding decentralization of forensic capabilities, particularly for digital traces. This study recommends laboratories undertake digital transformations to capitalize on the decentralization movement, develop a more comprehensive understanding of crime and security‐relevant problems, and play a more central role in problem‐solving collaboratively with law enforcement organizations and other stakeholders. A framework for the bilateral transfer of information and knowledge is proposed to magnify the impact of forensic science laboratories on abating crime, strengthening security, and reinforcing the criminal justice system. To accomplish digital transformations, laboratories require personnel with different expertise, including investigative reasoning, knowledge codification, data analytics, and forensic intelligence. Ultimately, this study encourages managers, educators, researchers, and policymakers to look beyond the usefulness of forensic results for solving individual investigations, and to realize the value of combined forensic knowledge and intelligence for developing broader strategies to deal with crime in digitalized society.