Tramadol (Ultram) concentrations in death investigation and impaired driving cases and their significance

We reviewed a series of 66 deaths in Washington State between 1995-2000 in which tramadol (Ultram and Ultracet, Ortho-McNeil) was detected in the decedent's blood, in order to assess the role tramadol was determined to have played. Additionally, we reviewed a series of 83 impaired driving cases in which tramadol was detected in order to establish a non-lethal blood tramadol concentration reference range. In both populations, tramadol was consistently found together with other analgesic, muscle relaxant, and CNS depressant drugs. Death was rarely attributable to tramadol alone. However, tramadol may be a significant contributor to lethal intoxication when taken in excess with other drugs, via the potential interaction with serotonergic antidepressant medications, as well as the potential for increased CNS depression. Although the incidence of tramadol detection has increased consistently over the last eight years, there is no evidence of a corresponding increase in the number of cases in which death was attributed solely to tramadol. Blood drug concentrations in many deaths exceeded the therapeutic serum range of 0.28-0.61 mg/L; however, the concentrations overlapped almost completely with the range identified in living subjects arrested for impaired driving. These findings suggest caution in the interpretation of blood tramadol concentrations outside of the recognized therapeutic range. It also suggests that the drug, even when used in moderate excess, is not a principle cause of death in suicidal or accidental deaths.     

Use of MDA (the "love drug") and methamphetamine in Toronto by unsuspecting users of ecstasy (MDMA)

It has recently been reported that purity of illicit tablets of ecstasy (MDMA) is now high. Our objective was to confirm whether hair of drug users, who request only ecstasy from their supplier, contains MDMA in the absence of other drugs. GC-MS analysis of scalp hair segments disclosed the presence of MDMA in 19 of 21 subjects and amphetamine/methamphetamine in eight subjects. Surprisingly, seven subjects had hair levels of the MDMA metabolite, MDA, equal to or greater than those of MDMA, suggesting use of MDA in addition to that of MDMA. These amphetamine derivatives might be included by clandestine laboratories to enhance effects of the drug cocktail or because of a perception that MDA synthesis might be simpler than that of MDMA. Drug users and investigators examining possible brain neurotoxic effects of MDMA need to consider that "ecstasy" tablets can contain MDA and methamphetamine despite no demand for the drugs.     

A genetic basis for anomalous band patterns encountered during DNA STR profiling

Since 1995 the Forensic Science Service (FSS) has carried out DNA profiling of reference samples for the UK National DNA Database and in forensic casework using two multiplex STR profiling systems. During this period, profiles with anomalous banding patterns, although comparatively rare, have been encountered regularly. The FSS has collected instances of triallelic patterns and aberrant diallelic patterns. A systematic examination of these patterns has provided insight into their underlying genetic cause. The triallelic patterns could be classified into two types based on the relative intensities of their component alleles. In the Type 1 pattern the alleles were of uneven intensity, whereas in the Type 2 pattern, all three alleles were of even intensity. Evidence is presented that the more frequent Type 1 pattern is the result of somatic mutation at a heterozygous locus, and the Type 2 pattern is the result of a localized chromosomal rearrangement at a heterozygous locus. Directly from the Type 1 pattern, it was possible to deduce the size difference between the progenitor and mutated allele. All mutational changes were found to be multiples of four nucleotides, suggesting the loss or addition of one or more tetrameric repeat units. Aberrant diallelic patterns were identified by analysts due to an unexpectedly large difference in intensity between alleles at a heterozygous locus. While some of these diallelic patterns are likely caused by the same genetic phenomena described above occurring at a homozygous locus, others are demonstrated to be caused by a mutation in the primer binding sequence, leading to a reduction in amplification efficiency of one allele. It is concluded that based on a visual inspection of a profile, it is possible to infer a likely genetic basis directly from the triallelic pattern. By contrast, the aberrant diallelic patterns can be due to any one of a number of possible genetic effects.     

Y-SNP typing of U.S. African American and Caucasian samples using allele-specific hybridization and primer extension

Multiplex analysis of genetic markers has become increasingly important in a number of fields, including DNA diagnostics and human identity testing. Two methods for examination of single nucleotide polymorphisms (SNPs) with a potential for a high degree of multiplex analysis of markers are primer extension with fluorescence detection, and allele-specific hybridization using flow cytometry. In this paper, we examined 50 different SNPs on the Y-chromosome using three primer extension multiplexes and five hybridization multiplex assays. For certain loci, the allele-specific hybridization method exhibited sizable background signal from the absent alternate allele. However, 100% concordance (>2000 alleles) was observed in ten markers that were typed using both methods. A total of 18 unique haplogroups out of a possible 45 were observed in a group of 229 U.S. African American and Caucasian males with the majority of samples being assigned into 2 of the 18 haplogroups.     

Interpretation of postmortem change in cadavers in Spain

Estimating time since death is especially difficult in the examination of poorly preserved cadavers and depends on the experience of the examiner and comparison with previously documented cases showing similar characteristics. The present study reports on information obtained over the past ten years through the work of the Laboratorio de Antropología y Odontología Forense (LAF) of the Instituto Anatómico Forense de Madrid, Spain, in particular evaluating how the type of fracture influences postmortem change. From the original 225 forensic cases examined between 1992 and 2002 in the LAF, a sample of 29 cases were selected from various regions of the Spanish mainland. A data collection protocol was established to reflect factors which the existing specialized literature, documenting the relation existing in the sample analyzed between time since death and the extent of postmortem change, which in the environments examined are distributed into the following phases: Phase 1 (putrefaction): one week to one month on the surface and two months in water. Phase 2 (initial skeletonization): two months on the surface and five to six months in water. Phase 3 (advanced skeltonization): six months to 1.5 years on the surface and 2.5 years buried. Phase 4 (complete skeletonization): about one year on the surface and three years buried. This paper also provide useful information on the impact of carrion insect activity, location, climate, seasonality, and predator.     

Enhanced kinship analysis and STR-based DNA typing for human identification in mass fatality incidents: the Swissair flight 111 disaster

A bioinformatic tool was developed to assist with the victim identification initiative that followed the Swissair Flight 111 disaster. Making use of short tandem repeat (STR) DNA typing data generated with AmpFlSTR Profiler Plus (PP) and AmpFlSTR COfiler(CO) kits, the software systematically compared each available STR genotype with every other genotype. The matching algorithm was based on the search for: (i) direct matches to genotypes derived from personal effects; and (ii) potential kinship associations between victims and next-of-kin, as measured by allele sharing at individual loci. The software greatly assisted parentage analysis by enabling kinship evaluation in situations where complete parentage trios were unavailable and, in some situations, with distantly related relatives. Exclusion of fortuitous kinship associations (FKA) was made possible through the recovery at the disaster site of at least one remains for every sought-after victim, and was incorporated into the kinship software. The data from the 13 combined STR loci produced 6 and 23 times fewer FKAs when compared with PP alone and AmpFlSTR Profiler (PR) alone, respectively. Identification leads or confirmations of identification were obtained for 218 victims for which DNA reference samples (personal effects and kin) had been submitted. Confirmation of an inferred kinship association was sought through frequency and likelihood calculations, as well as corroborative data from other identification modalities. The use of a simple, yet powerful, automated genotype comparison approach and the use of megaplexes with high power of discrimination (PD) values extended considerably the identification capabilities in the case of the Swissair disaster. The DNA typing identification modality proved to be a valuable component of the large arsenal of identification tools deployed in the aftermath of this disaster.     

Systematic analysis of stutter percentages and allele peak height and peak area ratios at heterozygous STR loci for forensic casework and database samples

To assist the interpretation of STR DNA typing results from forensic casework samples containing mixtures, the range of heterozygous allele peak height and peak area ratios (HR) and stutter percentages (stutter %) for the loci comprised in the AmpFlSTR Profiler Plus (PP) kit were assessed on 468 database and 275 casework single source samples. Stutter % medians were similar for database and casework samples, ranging from 2% to 7%. The upper limit of the stutter value range was 16%, calculated as median +3 SD, although lower locus-specific values could be used. HR medians were 93 +/- 6.5% for database samples, 88 +/- 12% for casework samples. For casework samples, the maximum signal imbalance noted was 52%, calculated as median -3 SD. No significant difference was observed between peak height and peak area calculated values. This study shows the importance of selecting the proper reference database for the establishment of HR threshold values.     

The evaluation of the extent of transporting or "tracking" an identifiable ignitable liquid (gasoline) throughout fire scenes during the investigative process

Tests have determined that boots or shoes of individuals at a fire scene do not transport sufficient contaminants ("tracking") through the fire scene to produce a positive laboratory result for the presence of gasoline in a fire scene that was not present at the time of the fire. Questions about the validity of forensic laboratory results have been raised on the basis that low-level gasoline residues detected in the laboratory samples could have been the result of transporting the residue by footwear contaminated from the fire scene ("tracking"). The data collected in this study establish that "tracking" does not lead to false-positive laboratory results. Canines trained and experienced in the detection of trace ignitable liquid residues were also utilized in this study. The canine results confirmed that properly trained canines show a higher sensitivity than do standard ASTM laboratory techniques for fire debris analysis. In a few cases, canines responded to contamination, but laboratory testing (which is the definitive indicator) did not produce positive results.     

Analysis of nitrite in adulterated urine samples by capillary electrophoresis

A simple method for analyzing nitrite in urine has been developed to confirm and quantify the amount of nitrite in potentially adulterated urine samples. The method involved separation of nitrite by capillary electrophoresis and direct UV detection at 214 nm. Separation was performed using a bare fused silica capillary and a 25 mM phosphate run buffer at a pH of 7.5. Sample preparation consisted of diluting the urine samples 1:20 with run buffer and internal standard, and centrifuging for 5 min at 2500 rpm. The sample was hydrodynamically injected, then separated using -25 kV with the column maintained at 35 degrees C. The method had upper and lower limits of linearity of 1500 and 80 microg/mL nitrite, respectively, and a limit of detection of 20 microg/mL. The method was evaluated using the National Committee for Clinical Laboratory Standards (NCCLS) protocol (Document EP10-A2), and validated using controls, standards, and authentic urine samples. Ten anions, ClO-, CrO4(-2), NO3-, HCO3-, I-, CH3COO-, F-, SO4-, S2O8(-2), and Cl-, were tested for potential interference with the assay. Interferences with quantitation were noted for only CrO4(-2) and S2O8(-2). High concentrations of Cl- interfered with the chromatography. The method had acceptable accuracy, precision, and specificity.     

Identification of ascorbic acid and its degradation products in black powder substitutes

Low explosives such as smokeless powder, black powder, and black powder substitutes have been used in illicit pipe bombings throughout the United States. Some of the newer black powder substitutes are formulated with ascorbic acid, which gradually decomposes as the powder ages, making it difficult if not impossible for the forensic chemist to identify it by traditional bulk techniques. A sensitive method for the identification of residual levels of ascorbic acid in black powder substitutes is presented. Powder samples are extracted with a mixture of acetonitrile and bis(trimethylsilyl)acetamide (BSA), which converts carboxylic acid and alcohol functional groups to trimethylsilyl esters and ethers, respectively. Samples are then analyzed by gas chromatography-mass spectrometry (GC-MS). Results have shown that trace amounts of ascorbic acid can be identified at detection limits that are well below those for traditional bulk techniques. Degradation products for ascorbic acid (hydroxylated carboxylic acids, furanones, and lactones) can also be detected.