扫描电镜/X射线能谱仪检验电流斑规范化方法探讨

目的探讨电流斑皮肤金属化的机理、检材提取处理和扫描电镜/能谱仪检验规范化方法,对检验结果进行分析和价值判断。方法用扫描电镜/能谱检验,采用低倍大窗口覆盖损伤区域采集平均元素能谱图,并在可能的金属元素富集区域寻找球形金属颗粒。结果扫描电镜下可观察到散在的孔穴、细胞碎屑、龟裂、裂隙等特征,有些电流斑可检出金属元素,其中部分电流斑可发现球形金属颗粒。结论采用规范化的检材提取、处理和检验方法可消除随意性方法造成错检的可能。电流斑皮肤上异常含量的金属附着可支持病理检验符合电流斑表现的结论,同时也为电击导体的推断和金属元素成分比对提供依据。球形金属颗粒的发现揭示存在电弧高温的可能性极大,可强力支持病理检验符合电流斑表现的结论。     

The Implementation Effectiveness of Trash Management in Ambon,Maluku: The Influence of Socialization,Coordination and Control to the Effectiveness of Trash Management

Principally, the policy is made to change the situation to be the desired one. The policy implementation in management context is in the terms of socialization, coordination and the control. This research is focused in the result process of public policy related to the trash management. The joint influence between the socialization, coordination and the control through the implementer and society behavior to the effectiveness of trash management in Ambon is being considered. The structural equation modeling (SEM) and Analysis of Moment Structure (AMOS) 20 is used to analyze the data in this research.     

Classification of Glass Fragments Based on Elemental Composition and Refractive Index*

Abstract: The aim of this study was to assess the efficiency of likelihood ratio (LR)‐based measures when they are applied to solving various classification problems for glass objects which are described by elemental composition, and refractive index (RI) values, and compare LR‐based methods to other classification methods such as support vector machines (SVM) and naïve Bayes classifiers (NBC). One hundred and fifty‐three glass objects (23 building windows, 25 bulbs, 32 car windows, 57 containers, and 16 headlamps) were analyzed by scanning electron microscopy coupled with an energy dispersive X‐ray spectrometer. Refractive indices for building and car windows were measured before (RI_b), and after (RI_a) an annealing process. The proposed scheme for glass fragment(s) classification demonstrates some efficiency, although the classification of car windows (c) and building windows (w) must be treated carefully. This is because of their very similar elemental content. However, a combination of elemental content and information on the change in RI during annealing (ΔRI = RI_a?RI_b) gave very promising results. A LR model for the classification of glass fragments into use‐type categories for forensic purposes gives slightly higher misclassification rates than SVM and NBC. However, the observed differences between results obtained by all three approaches were very similar, especially when applied to the car window and building window classification problem. Therefore, the LR model can be recommended because of the ease of interpretation of LR‐based measures of certainty.     

Unusual Death of a Transvestite: Identification of Crime Weapon and Survival Time*

Abstract: The authors report a case of a transvestite found murdered near his automobile with several lacerated contused wounds to the face and cranial fractures. Autopsy revealed that the cause of death was a serious head trauma with subdural and subarachnoidal hemorrhages. In order to identify the crime weapon, a scanning electron microscopy (SEM) was used which revealed metallic residue on the skin fragments with the same molecular composition of the car paint. As for survival time, antibody anti‐beta‐amyloid precursor protein (APP) was applied to brain fragments and brainstem tissue, allowing for axonal varicosities (which form 2 to 3 h following death) to be observed under the optic microscope. So, by using SEM we understood that the fatal cranial‐encephalic lesions were the result of the victim’s head being repeatedly struck against the car door while anti‐betaAPP led to the understanding that the time elapsed between injury and death was less than 2 to 3 h.     

Female Officers and Community Policing: Examining the Connection between Gender Diversity and Organizational Change

This study aimed to evaluate the temporal relationship between gender diversity and the adoption of community policing. The results from three separate structural equation models suggest that gender diversity is the stronger temporal predictor. The findings highlight the potential importance of gender diversity in organizational change. In theory, increasing the number of female officers may increase organizational agility through the creation of an alternative cultural ethos. More research is needed to understand how gender diversity affects police agencies, as well as how calls to reform the institution of policing affect women in law enforcement.     

4种硅藻检验方法的比较研究

目的比较硝酸乙醇法、酶消化法、“破机罐”法和Soluene-350法在检验硅藻中各自的优缺点,为法医实际办案提供理论依据。方法取家兔肝、肾和骨髓3种组织各2g,分别用上述4种方法消化,比较4种不同方法分别将组织这些完全消化所需要的时间、消化能力、对硅藻的检出率以及对硅藻的破坏程度。结果消化时间以Solu-ene-350法耗时最长,其次是酶消化法,硝酸乙醇法和破机罐法耗时最短。4种方法消化能力的强弱依次是“破机罐”法、硝酸乙醇法、酶消化法、Soluene-350法。对梅尼小环藻(淡水)和桥弯藻(淡水),酶消化法的检出率最高,硝酸乙醇法其次,“破机罐”法和Soluene-350法最低。对舟形藻(海水),酶消化法的检出率高,其余3种方法几乎没检测到。扫描电镜观察:酶消化法对硅藻结构几乎没有破坏。其余3种方法对硅藻均有不同程度的破坏。结论从降低成本、提高检测效率角度,应选择“破机罐”法和硝酸乙醇法;从安全性和环保角度,或可疑水样为海水及硅藻密度较小时,应选择酶消化法;Soluene-350法因耗时长、成本高且硅藻检出率低,不适于在基层法医中推广。     

Fluorescence and Structural Degradation in Composite Resins as a Function of Temperature*

Abstract: Detecting composite resin upon postmortem examination can be difficult. Ultraviolet illumination has been suggested to ease location of this material; however, this may not be advisable in incineration situations. Understanding of the chemical and physical properties of resin as a function of temperature is an important parameter in identification of this material in incineration circumstances. Twenty-seven discs of resin, Quixx (Dentsply), Filtek Supreme (3 M), and Tetric Ceram (Ivoclar) were prepared and exposed to increasing heating conditions of 200°C–900°C in 100°C increments for 30 min. Analysis was performed with Fourier transform infrared spectroscopy, ultraviolet-visible light spectrophotometry, scanning electron microscopy/energy dispersive X-ray spectroscopy, optical microscopy, and UV illumination. Characterization of the material occurred at each temperature range. The organic components and the fluorescence properties were lost at temperatures above 300°C. The inorganic component remained through 900°C. This information can aid in detection of resin in high temperature circumstances.     

Examination of the steps leading up to the physical developer process for developing fingerprints

This is a systematic study that examines several acid prewashes and water rinses on paper bearing latent prints before its treatment with a silver physical developer. Specimens or items processed with this method are usually pretreated with an acid wash to neutralize calcium carbonate from the paper before the treatment with a physical developer. Two different acids at varying concentrations were tested on fingerprints. Many different types of paper were examined in order to determine which acid prewash was the most beneficial. Various wash times as well as the addition of a water rinse step before the development were also examined. A pH study was included that monitored the acidity of the solution during the wash step. Scanning electron microscopy was used to verify surface calcium levels for the paper samples throughout the experiment. Malic acid at a concentration of 2.5% proved to be an ideal acid for most papers, providing good fingerprint development with minimal background development. Water rinses were deemed unnecessary before physical development.     

Evaluation of four digestive methods for extracting diatoms

Objective

To compare the merit of four digestive methods (nitric acid plus hydrogen peroxide, proteinase K, nitric acid in Disorganization Can and Soluene-350) for extracting diatoms in order to choose the best digestive method for the diagnosis of drowning.

Methods

Liver, kidney and bone marrow of rabbits were minced and then digested by four digestive methods separately with the following indices compared: (1) time demanded for complete digestion; (2) degree of digestion for different tissues; (3) the reclaiming ratio of diatoms; (4) the degree of digestive destruction to diatoms.

Results

For sufficiently digesting the same tissue, the demanded times for the different methods ranked from the longest to the shortest were as follows: Soluene-350, proteinase K, nitric acid plus hydrogen peroxide, nitric acid in Disorganization Can. Nitric acid in Disorganization Can method and nitric acid plus hydrogen peroxide method digested the tissues more thoroughly than proteinase K, than Soluene-350 methods. For Cyclotella and Cybella, proteinase K method reclaimed most diatoms and nitric acid plus hydrogen peroxide method reclaimed less, while nitric acid in Disorganization Can and Soluene-350 methods reclaimed the least. For Navicula, the majority of diatoms could be extracted using proteinase K method, but only a few diatoms with other three methods. Under scanning electron microscopy (SEM), the structure of diatoms remained almost perfect after digestion with proteinase K, but destroyed to some extent with other three methods.

Conclusion

This study demonstrated that different diatoms (in fresh or sea water) have different resistance to different digestive reagents. As far as the reliability and applicability of the diatom test is concerned, proteinase K method is of the best choice, nitric acid plus hydrogen peroxide can be its substitute. Soluene-350 cannot be used for extracting sea water diatoms.     

根据创口射击残留物推断“5.4”式手枪射击距离的研究

目的利用环境控制扫描电镜/能谱仪（SEM/EDX）研究枪弹创射入口周围射击残留物与射击距离的关系,探讨其能否用于射击距离的判断。方法采用＂＂5.4＂＂式手枪分别在5、10、15、20、30、40、50、60、70、80、90、120cm处射击乳猪皮肤,利用SEM/EDX观察创口周围GSR的分布和成分,并建立回归方程。结果射击距离和GSR颗粒数量之间总体表现为直线关系,并建立了相应的回归方程。当射击距离为10~90cm时,用该方程推断射击距离效果较好。结论检测创口周围GSR可望用于判断“5.4”式手枪的射击距离。