差示扫描量热法检验合成纤维

目的研究不同种类合成纤维以及不同厂家生产的同种类合成纤维的鉴别方法。方法应用功率补偿型差示扫描量热仪测定涤纶、腈纶、锦纶、丙纶、氨纶、氯纶等6种常见合成纤维和10个厂家生产的涤纶纤维的DSC曲线,并对热学参数进行计算和分析。结果涤纶、腈纶、锦纶、丙纶、氨纶、氯纶的DSC曲线明显不同,10个厂家生产的涤纶纤维的DSC曲线虽然非常相近,但对其熔融温度Tm、熔融峰顶温度Tmp、熔融焓变ΔHm、结晶温度Tc、结晶峰顶温度Tcp和结晶焓变ΔHc等热学参数的计算结果显示,10个涤纶纤维的参数并不完全相同。结论差示扫描量热法不但能对不同种类的合成纤维进行鉴别,也可区分不同厂家生产的同种类纤维,从而为案件侦破提供更为准确的方向、线索和证据。     

Heat Induced Changes to Dental Resin Composites: A Reference in Forensic Investigations?*

The objective was to investigate color change and surface damage in dental resin composites exposed to high temperatures over different time intervals for comparative purposes. Samples were prepared using two resins - Z100(R) (R1) and Charisma (R2), heated at the following temperatures: 200 degrees C, 400 degrees C, 600 degrees C, 1000 degrees C, for 15, 30 and 45 min (n = 104 for each resin sample). Color (DeltaE) and brightness (DeltaL) changes were analyzed by spectrophotometry using the CIE Lab system and surface changes by Scanning Electron Microscopy (SEM). R1 showed more intense color changes after heat exposure than R2. DeltaL values were found to be the best parameter for evaluation of light and color change. A biphasic pattern after thermal exposure was detected, from dark brown to light white. SEM showed more intense alterations in R2 than in R1. These results indicate that the parameters observed in both resins are useful as a guide in forensic analyses.     

Gunshot residue in Chicago police vehicles and facilities: an empirical study

Suspects in shooting investigations in Chicago are routinely transported in department vehicles and detained in department facilities prior to gunshot residue (GSR) evidence collection. The GSR test results are used to associate the suspect with primary exposure to GSR. The potential for these vehicles and facilities being sources of secondary GSR contamination needed to be determined. A total of 201 samples were collected from randomly selected vehicles and detention facilities. The sampling collected trace materials from surfaces that suspects' hands may contact during the arrest process. These samples were examined for the presence of GSR particles using scanning electron microscopy. Upon completion of the automated analysis, those particles that met an initial GSR screening criterion were relocated and reanalyzed. The locations where GSR particles were recovered allowed us to make recommendations to the Chicago Police Department with regard to transporting and detaining these suspects. The low number of GSR particles recovered suggests that the potential for secondary contamination, although present, is relatively low.     

Controversial Suicide Case Using a Submachine Gun with a Sound Suppressor—The Need of Team Work of Forensic Chemistry and Firearm Examiners

Evidence materials in a presumed suicide case were studied by a firearm examiner and a forensic chemist. The victim's body with double gunshot wounding in his forehead, a machine gun in the sustained fire mode with a silencer, and four cartridge cases were found. Examinations of the evidence, the case file studies, and experiments dedicated to the case were carried out. Relationships between the placement of cartridge cases and the gun were established using a fast camera. The distributions of gunshot residues on the evidence materials and within the comparative gunshot patterns were studied by means of optical and electron microscopy, X‐ray microanalysis, and infrared spectroscopy. The shooting distance was assessed to be 30 cm or more, whereas the greatest distance that could have been achieved by the victim himself was about 11–13 cm. The obtained results supported the version of homicide rather than suicide.     

A new method for the recovery and evidential comparison of footwear impressions using 3D structured light scanning

Footwear impressions are one of the most common forms of evidence to be found at a crime scene, and can potentially offer the investigator a wealth of intelligence. Our aim is to highlight a new and improved technique for the recovery of footwear impressions, using three-dimensional structured light scanning. Results from this preliminary study demonstrate that this new approach is non-destructive, safe to use and is fast, reliable and accurate. Further, since this is a digital method, there is also the option of digital comparison between items of footwear and footwear impressions, and an increased ability to share recovered footwear impressions between forensic staff thus speeding up the investigation.     

专利药品差别定价制理念与适用

《TRIPs协议修正案》的出台有一定的历史背景。它的诞生也会对差别定价制产生显著的进一步影响。该《修正案》的出台促使了全球差别定价制的发展。差别定价制中的发达国家完全补偿类型、发展中国家支付专利使用费补偿类型和最不发达国家零补偿类型也会受到该《修正案》的影响。这些影响的构成有一定的政治、经济和法律原因。     

A New Method for the Removal and Analysis of Small Particles Adhering to Carpet Fiber Surfaces,,

Fibers are a commonly encountered evidence type and fiber comparisons are routinely conducted. When the characteristics of questioned and known fibers correspond, the probative value is limited because the characteristics compared are determined by their manufacture. It would be valuable to test the hypothesis that questioned fibers originated from a specific carpet. One means of testing this is to analyze fine particles on the fibers. A procedure was developed for removing adhering particles from fibers and preparing them for scanning electron microscopy/ energy dispersive X‐ray spectrometry (SEM/EDS) analysis. The efficacy of several fluids (acetone, ethanol, hexanes, aqueous ethanol, aqueous sodium hexametaphosphate) and agitation methods (sonication and vortexing) for removing particles from fibers was evaluated. The most effective method evaluated was sonication in ethanol for 10 min. The recovered particles were filtered onto a polycarbonate filter and analyzed by automated SEM/EDS analysis to generate data on the particle assemblage. This method makes possible future research to test the within‐item and between‐item variability of particle assemblages on fibers.     

Analysis and Discrimination of Single‐Layer White Architectural Paint Samples,

Comparative analyses of 50 single‐layer white architectural paints were conducted to determine the discrimination power using standard techniques and to provide a basis for assessing significance when paints with limited features are not discriminated. Utilizing Fourier transform infrared spectroscopy (FTIR), 68 undifferentiated pairs resulted, yielding a discrimination of 94.45%. Adding stereomicroscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and backscatter electron (BSE) imaging, and pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), the overall discrimination was 99.35%. The study included blind verification replicates, which resulted in the only pairs without indications of physical or chemical differences. The remaining groups of undifferentiated samples contained subtle differences by at least one technique, but were considered undifferentiated for the discrimination power evaluations. This study demonstrates a high degree of discrimination of single‐layer white architectural paints using methods of analysis often encountered in forensic science laboratories.     

FACE‐R—A 3D Database of 400 Living Individuals' Full Head CT‐ and Face Scans and Preliminary GMM Analysis for Craniofacial Reconstruction

In the past, improvements in craniofacial reconstructions (CFR) methodology languished due to the lack of adequate 3D databases that were sufficiently large and appropriate for 3‐dimensional shape statistics. In our study, we created the “FACE‐R” database from CT records and 3D surface scans of 400 clinical patients from Hungary, providing a significantly larger sample that was available before. The uniqueness of our database is linking of two data types that makes possible to investigate the bone and skin surface of the same individual, in upright position, thus eliminating many of the gravitational effects on the face during CT scanning. We performed a preliminary geometric morphometric (GMM) study using 3D data that produces a general idea of skull and face shape correlations. The vertical position of the tip of the (soft) nose for a skull and landmarks such as rhinion need to be taken into account. Likewise, the anterior nasal spine appears to exert some influence in this regard.     

Trajectory Reconstruction Through Analysis of Trace Evidence in Bullet–Intermediate Target Interaction by SEM/EDX

Abstract:  A young male was shot to death by a police officer with a Chinese Type 64 7.62 mm pistol when he was dealing with an aggravated assault arising from a traffic accident. By using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM/EDX), trace deposits on the discharged bullet and the intermediate target, i.e., a concrete telegraph pole at the scene, were identified to be from each other. The result demonstrated the bullet causing the death ricocheted from the concrete telegraph pole before striking the victim, thus indicating the incident was accidental. The case report illustrates the evidential value of trace materials derived, respectively, from discharged bullets and intermediate targets in bullet–intermediate target interaction for trajectory reconstruction. In addition, it indicates that the SEM/EDX method with its nondestructive nature, compared to other methods, may be more helpful in certain situations in determining the origins of trace evidentially valuable deposits on substrates.