Microscopic Residues of Bone from Dissolving Human Remains in Acids

Dissolving bodies is a current method of disposing of human remains and has been practiced throughout the years. During the last decade in the Netherlands, two cases have emerged in which human remains were treated with acid. In the first case, the remains of a cremated body were treated with hydrofluoric acid. In the second case, two complete bodies were dissolved in a mixture of hydrochloric and sulfuric acid. In both cases, a great variety of evidence was collected at the scene of crime, part of which was embedded in resin, polished, and investigated using SEM/EDX. Apart from macroscopic findings like residual bone and artificial teeth, in both cases, distinct microscopic residues of bone were found as follows: (partly) digested bone, thin‐walled structures, and recrystallized calcium phosphate. Although some may believe it is possible to dissolve a body in acid completely, at least some of these microscopic residues will always be found.     

差示扫描量热法（DSC）检验塑料绳

目的:对不同厂家的塑料绳进行区分和鉴别。方法:使用功率补偿型差示扫描量热仪(DSC)对五种不同厂家的塑料绳进行分析。结果:可测得每种塑料绳的DSC曲线和熔点温度Tm,熔融峰温Tmp,熔化焓△Hm等热学参数。结论:利用差示扫描量热法可以对型号和颜色相同而厂家不同的塑料绳进行鉴别,该方法为办案过程中塑料绳的检验提供了一种有效技术手段。     

Visualisation by confocal microscopy of traces on bullets and cartridge cases

The capabilities of confocal scanning laser microscopy for the visualisation of marks on bullets and cartridge cases were investigated. Confocal microscopy provides solutions to important limitations of conventional comparison microscopy with grazing light incidence, as generally used for the examination of these marks. It is expected that confocal microscopy, thanks to its broad applicability within the field of firearms investigation and its capability of non-destructively gathering quantitative three-dimensional information, will lead to a more complete and objective forensic examination of bullets and cartridge cases.     

Analysis and discrimination of electrical tapes: part II. Backings

The backings of 90 black electrical tapes were analyzed to evaluate the chemical components of these films, the ability of individual techniques to discriminate samples, and the ability of the techniques combined to distinguish samples. The techniques utilized and their respective discrimination results were stereomicroscopy and physical measurements, to include observation of surface features of the backing, width, and thickness measurements (c. 64%); Fourier transform infrared spectroscopy (FTIR) using a microscope accessory (c. 83%); pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS; c. 81%); and scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS; c. 87%). Ninety-four percent of the backings were discriminated through this combination of analytical methods. Finally, evaluating these results in conjunction with previously published data on the analysis of the adhesives from the same set of electrical tapes provided an overall discrimination of nearly 96%.     

The identification of two unusual types of homemade ammunition

Illegal homemade ammunition is commonly used by criminals to commit crimes in Taiwan. Two unusual types of homemade ammunition that most closely resembling genuine ammunition are studied here. Their genuine counterparts are studied as the control samples for the purpose of comparison. Unfired ammunition is disassembled, and the morphological, dimensional, and compositional features of the bullet and cartridge case are examined. Statistical tests are employed to distinguish the dimensional differences between homemade and genuine ammunitions. Manufacturing marks on head stamps of the cartridge case are carefully examined. Compositional features of propellant powders, primer mixtures, and gunshot residues are also analyzed. The results reveal that the morphological, dimensional, and compositional features of major parts of the ammunition can be employed to differentiate homemade cartridges from genuine ones. Among these features, tool marks on the head stamps left by the bunter can be used to trace the origin of ammunition.     

电流斑的环境扫描电镜X射线能谱分析

目的利用环境扫描电镜-X射线能谱仪(environmental scanning electron microscope and energydispersive X-ray microanalyser,ESEM-EDX)研究电流斑微观形态特征及元素构成,以期为电流斑及电击死的鉴定提供更准确、客观的依据。方法用ESEM-EDX检测5例电流斑的扫描电镜形态、金属颗粒的形态及其元素组成。结果电流斑及周围皮肤可见电穿孔、金属熔珠,熔珠主要由铁、铜、铝等常见金属元素和金、钛、钡等人体少见的金属元素构成。结论 ESEM-EDX检测可为电击死的鉴定提供客观的依据。     

Comparison of GSR Composition Occurring at Different Locations Around the Firing Position

Abstract: Variations in gunshot residue (GSR) compositions are used in the reconstruction of shooting incidents. In this study, GSR samples taken from seven different locations around and in the firearm were collected and analyzed using scanning electron microscopy/energy dispersive X‐ray analysis. Four different types of ammunition were applied. Very low correlations were found when different ammunition were used. This clearly shows that it is possible to differentiate between ammunition types. When the same ammunition was used, high correlations were found between samples taken from external positions (such as hands of shooter, bullet‐entrance holes) but poor correlation was found between internal samples (such as firearm barrel, cartridge case) and external samples. A high degree of association was found between samples that simulated victim and shooter. These findings clearly demonstrate that GSR comparison studies are meaningful but care needs to be taken when choosing suitable exhibits. External samples (such as hands of shooter, bullet‐entrance holes) are more suitable candidates than internal samples (barrel of the firearm, cartridge case).     

Analysis of Gunshot Residue and Associated Materials—A Review

Abstract: A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a “case by case” approach is argued to be more preferable to a “formal” classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, whereever practicable.     

Variation in the Measurement of Cranial Volume and Surface Area Using 3D Laser Scanning Technology

Abstract: Three‐dimensional (3D) laser scanner models of human crania can be used for forensic facial reconstruction, and for obtaining craniometric data useful for estimating age, sex, and population affinity of unidentified human remains. However, the use of computer‐generated measurements in a casework setting requires the measurement precision to be known. Here, we assess the repeatability and precision of cranial volume and surface area measurements using 3D laser scanner models created by different operators using different protocols for collecting and processing data. We report intraobserver measurement errors of 0.2% and interobserver errors of 2% of the total area and volume values, suggesting that observer‐related errors do not pose major obstacles for sharing, combining, or comparing such measurements. Nevertheless, as no standardized procedure exists for area or volume measurements from 3D models, it is imperative to report the scanning and postscanning protocols employed when such measurements are conducted in a forensic setting.     

Assessment of Wear‐Related Features of the Kerf Wall from Saw Marks in Bone*†

Abstract: Analyses of saw marks in bone may yield important information about the class characteristics of saws used in postmortem dismemberments, yet little research has been directed at identifying saws’ individualizing characteristics. This study adds to existing saw mark analysis methodologies by examining wear‐related features of kerf walls using light‐ and environmental scanning electron microscopy. A crosscut saw and hacksaw were used to create sequences of 30 cuts in bone; these sequences reveal patterns of progressive loss of fine details of kerf wall morphology with increasing saw blade wear, because of the rounding of sharp points and edges. Nevertheless, diagnostic kerf wall features used to establish class characteristics persist despite these wear‐related changes. Unsuccessful attempts at statistical analysis of wear‐related changes, based on striae width and density, suggest these patterns are not readily quantifiable. Additionally, despite the scanning electron microscope’s superior imaging capabilities, it provided few practical, methodological gains over traditional light microscopy.