Quantitative Analysis of Gamma‐Hydroxybutyrate at Endogenous Concentrations in Hair using Liquid Chromatography Tandem Mass Spectrometry

Abstract: A method capable of quantifying endogenous concentrations of gamma‐hydroxybutyrate (GHB) in human head hair was developed and validated using liquid chromatography/mass spectrometry/mass spectrometry (LC/MS/MS). Hair was digested under alkaline conditions, and GHB was isolated using liquid–liquid extraction. LC/MS/MS was performed using atmospheric pressure chemical ionization in the negative mode, multiple reaction monitoring, and deuterated internal standard (GHB‐D₆). Linearity was observed between 0.1 and 100 ng/mg GHB (R² = 1.000). The limits of detection and quantitation in human hair were 0.2 and 0.4 ng/mg, respectively. Accuracy at 2 ng/mg and 10 ng/mg was determined to be 97% and 94%, and intra‐assay CVs at these concentrations were 5.2% and 7.4% (n = 4). Beta‐hydroxybutyrate (BHB), alpha‐hydroxybutyrate, gamma‐butyrolactone, and 1,4‐butanediol did not produce an interference, and there was negligible ion suppression or enhancement from the matrix.     

Nanomanipulation‐Coupled Nanospray Mass Spectrometry Applied to the Extraction and Analysis of Trace Analytes Found on Fibers*

Abstract: This article presents the novel instrumentation of nanomanipulation coupled to nanospray ionization‐mass spectrometry, which is used to directly probe trace analytes found on individual fibers. The low detection limits and sample volumes associated with nanospray ionization‐mass spectrometry make it the ideal instrument to implement for trace analysis. Nanospray ionization‐mass spectrometry, coupled with the nanomanipulator, allows for the direct probing of trace particulates on fibers. The technique is demonstrated by dissolving an electrostatic particle of cocaine from a fiber, collecting the analyte solution in a nanospray tip, and transferring the tip directly to the mass spectrometer to complete analysis. The utility of this technique is evident through the minimal sample preparation and short analysis time. The use of nanomanipulation coupled to nanospray ionization‐mass spectrometry could improve on current trace particulate analysis by reducing both detection limits and sample size required to complete analysis.     

Preliminary Studies into the Characterization of Chemical Markers of Decomposition for Geoforensics*

Abstract: In this paper, we report the results of our preliminary studies into chemical characterization of the fluids produced during decomposition in the absence of a soil matrix. Pig (Sus domestica) carcasses were used to model the human decomposition process in two separate locations, Western Australia (Perth) and Canada (Oshawa). Analysis involved simple dilution and filtration of the decomposition fluids followed by gas chromatography–mass spectrometry. Several previously unreported compounds were detected in the decomposition fluid samples during the trials, including benzeneacetic acid, benzenepropionic acid, 2‐piperidone, and isocaproic acid. Possible biosynthetic pathways for some of the compounds produced are proposed. Further research trials are required, particularly in the presence of soil matrices.     

An initial evaluation of stable isotopic characterisation of post-blast plastic debris from improvised explosive devices

A number of two-way radios, similar to those which have been employed to initiate Improvised Explosive Devices (IEDs), were acquired from a commercial supplier and grouped into four pairs. Samples of plastic material were collected from five distinct regions of each radio and analysed by Infrared and Raman spectroscopy to identify the nature of the material. One radio of each pair was then subjected to detonation with a commercially available plastic explosive. The combination of radio and explosive was considered to be representative of the components of an IED. Following detonation, fragments were recovered and, where possible, identified as specific sampling points of the radio.A combination of δ²H and δ¹³C stable isotopic analysis of material from each of the five sampling points was found to provide a pattern which was characteristic of a given radio and provided a means to associate pairs of radios. When few fragments were recovered, no positive association could be made between the fragments and the paired, undamaged radio. This was attributed, in part, to manufacturing variation in the radios. However, when three or more post-blast fragments were recovered it was possible to associate these with the paired, undamaged radio with a high degree of certainty.     

Basic forensic identification of artificial leather for hit-and-run cases

Single fibers retrieved from a victim's garments and adhered to the suspect's automobile have frequently been used to prove the relationship between victim and suspect's automobile. Identification method for single fiber discrimination has already been conducted. But, a case was encountered requiring discrimination of artificial leather fragments retrieved from the victim's bag and fused fibers from the bumper of the suspect's automobile. In this report, basic studies were conducted on identification of artificial leathers and single fibers from leather materials. Fiber morphology was observed using scanning electron microscopy (SEM), color of these leather sheets was evaluated by microspectrophotometry (MSP), the leather components were measured by infrared micro spectrometry (micro-FT-IR) and the inorganic contents were ascertained by micro-X-ray fluorescence spectrometry (micro-XRF). These two methods contribute to other analytical methods too, in the case of utilized single fiber analytical methods. The combination of these techniques showed high potential of discrimination ability in forensic examinations of these artificial leather samples. In regard with smooth surface artificial leather sheet samples, a total of 182 sheets were obtained, including 177 colored sheets directly from 10 of 24 manufacturers in Japan, and five of them were purchased at retail circulation products. Nine samples of suede-like artificial leather were obtained, 6 of them were supplied from 2 manufacturers and 3 sheets were purchased as retailing product. Single fibers from the smooth surface artificial leather sheets showed characteristic for surface markings, and XRF could effectively discriminate between these sheets. The combination of results of micro-FT-IR, color evaluation by MSP and the contained inorganic elements by XRF enabled to discriminate about 92% of 15,576 pairs comparison. Five smooth surface samples form retailing products were discriminated by their chemical composition into four categories, and in addition color information to this result, they were clearly distinguished. Suede-like artificial leather sheets showed characteristic extra-fine fibers on their surface by the observation of SEM imaging, providing high discriminating ability, in regard with suede-like artificial leather sheets were divided into three categories by micro-FT-IR, and the combination of these results and color evaluation information, it was possible to discriminate all the nine suede-like artificial leather sheets examined.     

The analytical profile of some 4-methylthioamphetamine (4-MTA) homologues

The 4-methylthioamphetamine (4-MTA) is a sulphur-containing amphetamine-type stimulant (ATS), which appeared on the illicit market in Europe at the end of 90s. For the purpose of this study, several N-alkyl homologues of 4-MTA, including 4-methylthiomethamphetamine (4-MTMA), 4-methylthioethylamphetamine (4-MTEA), 4-methylthiodimethamphetamine (4-MTDMA), 4-methylthiopropylamphetamine (4-MTPA) and 4-methylthiobutylamphetamine (4-MTBA) were synthesized. The homologues were characterized by means of gas chromatography/mass spectrometry (GC–MS), infrared (IR) spectroscopy and the magnetic resonance spectroscopy (¹H and ¹³C NMR). The gas chromatography and mass spectrometry properties of their acetyl, trifluoroacyl (TFA), pentafluoropropionyl (PFP) and heptafluorobutyryl (HFB) derivatives were also investigated and discussed.     

Forensic Comparison of Automotive Aluminum Wheel Fragments Using Synchrotron Radiation X‐ray Fluorescence with 18‐ and 116‐keV Excitation X‐rays

The performance of synchrotron radiation X‐ray fluorescence (SR‐XRF) spectrometry for nondestructive discrimination of small fragments of automotive aluminum wheels was studied. Fragments (< 500 × 500 μm²) of 45 kinds of wheels were first analyzed by scanning electron microscopy–energy dispersive spectroscopy (SEM‐EDS) and then by SR‐XRF. Despite the Mg/Al intensity ratio being a useful identification index, SEM‐EDS was not efficient enough because of the absence of other meaningful indicators of comparison. Conversely, pairwise comparison was conducted and a 92.9% identification was achieved via SR‐XRF using 18‐keV X‐rays. Trace heavy elements in the high‐energy region were detected by SR‐XRF using 116‐keV X‐rays, and an 82.9% identification was obtained. Combined use of 18‐ and 116‐keV X‐rays allowed 98.2% identification. Hence, SR‐XRF is a powerful tool for nondestructive discrimination of automotive aluminum wheels with high precision using trace elements in a wide energy region.     

Simultaneous Determination of 13 Anticoagulant Rodenticidesin Human Blood by Liquid Chromatography–Tandem Mass Spectrometry and its Application in Three Poisoning Cases

Anticoagulant rodenticides are widely used for rodent control around the world. A rapid and sensitive method was developed and validated for the simultaneous determination of 13 anticoagulant rodenticides (coumafuryl, pindone, valone, warfarin, coumatetralyl, coumachlor, diphacinone, dicumarol, chlorophacinone, bromadiolone, difenacoum, flocoumafen, and brodifacoum) in human blood by liquid chromatography–tandem mass spectrometry. After liquid–liquid extraction, the anticoagulant rodenticides were separated on an Eclipse Plus C18 column. Linearities were observed for each analyte in blood ranging from 0.5 to 50 ng/mL, with correlation coefficients over 0.99. The limits of detection ranged from 0.01 to 0.2 ng/mL, and the limits of quantification were 0.5 ng/mL for all analytes. The intraday and interday precisions were <15%, and accuracies ranged from 80.3% to 111.0%. This validated method with high sensitivity has been applied in three anticoagulant rodenticide poisoning cases and has been used successfully in monitoring blood concentrations for months.     

Establishment of 43-plex SNP Typing System and Its Forensic ApplicationCSCD

Objective: To evaluate the application of 43 -plex SNP typing system in forensic science. Methods: The typing of 43 SNP loci in 123 unrelated Han individuals from East China was detected by MALDI-TOF-MS. The application value of 43-plex SNP typing system was assessed according to the forensic parameters of population genetics. Results: All the 43 SNP loci of 123 individuals showed no significant departure from Hardy-Weinberg equilibrium (P>0.05). Excepted rs1355366, rs2270529, rs10776839 and rs938283, there were 39 SNP loci had minor allele frequencies (MAF), which were greater than 0.25. Among the 25 loci MAFs, 24 ranged from 0.4 to 0.5, while 3 were close to 0.4. The DP, CDP, PIC, Ho, PEtrio and PEduo of the 43 SNP loci were 0.290 1-0.654 4, 1-9.8×10-11, 0.170 8-0.500 0, 0.155 7-0.593 5, 0.085 4-0.250 0 and 0.014 6-0.125 0, respectively. The CPEtrio and CPEduo were 0.999 986 and 0.992 436 1, respectively. Conclusion: The 43-plex SNP typing system in present study shows a high polymorphism, which can be an effective supplement and verification for traditional STR genetic markers. It also can be used with other commercial kits for the forensic paternity testing and individual identification. © 2018 by the Editorial Department of Journal of Forensic Medicine.     

5F-UR-144的热不稳定性研究

目的利用气相色谱-质谱法(GC-MS)、液相色谱-四级杆-飞行时间质谱(LC-Q-TOF/MS)和核磁共振光谱法(NMR)研究合成大麻素5F-UR-144遇热分解的具体变化情况。方法对照品用无水乙醇定容稀释后,经GC-MS和LC-Q-TOF/MS检测得到对应的色谱图和质谱图;对照品分别于常温和280℃密封加热后用无水乙醇定容稀释,经LC-Q-TOF/MS和NMR检测得到对应的质谱图、¹H和¹³C核磁共振波谱;对照品分别于常温逐步提升至300℃密封加热后用无水乙醇定容稀释,经LC-Q-TOF/MS检测得到对应的色谱图。结果5F-UR-144在高温下会开环产生新的物质;5F-UR-144从130℃开始分解,随着温度升高分解程度提升,240℃时分解率达到98%;随着温度继续升高,超过260℃,分解产物会碳化。结论基于5F-UR-144的热不稳定性,在检测时应考虑若通过烫食方式吸食5F-UR-144,其进入人体的成分会发生变化;气相色谱或气相色谱-质谱法不适合定量检测5F-UR-144。