Virtual autopsy and forensic identification-practical application: a report of one case

The body of an unidentified elderly woman was found trapped in a floodgate. Prior to autopsy, full-body multislice computed tomography (MSCT) was performed for study of bone lesions and cause of death. Age was estimated by analysis of the sternal end of the fourth rib and of the pubic symphyseal medial articular surfaces. The results were then compared with the autopsy findings. MSCT was superior to autopsy in diagnosis of traumatic bone lesions and also revealed dental anomalies and signs of drowning. Age estimation gave a similar result for both methods. This case report illustrates the potential value of MSCT for medico-legal investigations of death: diagnosis of injuries, possibility of determining the cause of death, and anthropological study in order to estimate age or to visualize features likely to enable identification of a corpse.     

Age estimation by pulp/tooth ratio in canines by peri-apical X-rays

Estimation of age in individuals has received considerable attention in forensic science, in which it is a widely used method for individual identification, together with paleo-demographic analyses to establish mortality patterns in past populations. The present investigation, which is a continuation of a previously published pilot study, was conducted to examine the possible application of the pulp/tooth area ratio by peri-apical images as an indicator of age at death. A total of 200 peri-apical X-rays of upper and lower canines were assembled from 57 male and 43 female skeletons of Caucasian origin, aged between 20 and 79 years. They belong to the Frassetto osteological collection of Sassari (Sardinia) and are housed in the Museum of Anthropology, Department of Experimental and Evolutionistic Biology, University of Bologna. For each skeleton, dental maturity was evaluated by measuring the pulp/tooth area ratio on upper (x(1)) and lower (x(2)) canines. Very good agreement was found between intraobserver measurements. Statistical analysis was performed in order to obtain multiple regression formulae for dental age calculation, with chronological age as dependent variable, and gender, and upper and lower canines as independent variables. Stepwise regression analysis showed that gender did not contribute significantly to the fit (p=0.881) whereas variables x(1) and x(2) and the first-order interaction between them did. These two variables explained 92.5% of variations in estimated chronological age and the residual standard error was 4.06 years. Lastly, two simple linear regression equations were obtained for age estimation using canines from the maxilla and mandible separately. Both models explained 86% of variations in estimated chronological age and allowed an age-at-death estimate with a residual standard error of about 5.4 years.     

Mitochondrial DNA amplification success rate as a function of hair morphology

This study examines the amplification success rate of mitochondrial DNA from human head hair with respect to their potential for forensic application. Mitochondrial DNA was isolated using a Chelex-based extraction method and amplified using the LINEAR ARRAY duplex PCR system. The particular focus of this study was to characterize the morphological features of human head hair in order to further the understanding of the factors that influence amplification success rate in hair tissue using the LINEAR ARRAY duplex PCR system. 2554 head hairs from 132 individuals representing four population groups were amplified. The hair samples were characterized as follows: 1251 were identified microscopically as telogen hairs and 1303 were classified as hairs without roots (removed before extraction). Amplification success was assessed as a function of several independent variables: morphological characteristics; telogen root versus no root; donor age; scalp origin; use of cosmetic hair treatments; and race of the donor. The results show that a positive correlation exists between amplification success and the presence of a telogen root. Combining the amplification success with either the original or optimized protocol, telogen hairs result in an overall success rate of 77.5% compared with 65% for hairs with no roots. Controlling for telogen hairs, the findings indicate that the overall success rate is independent of cosmetic hair treatments; medulla structure; shaft length, diameter, and volume; and scalp origin. Conversely, the age of the donor, the race of the donor, and hair pigmentation all contribute to a variation in amplification success rate.     

Alternative fuels in fire debris analysis: biodiesel basics

Alternative fuels are becoming more prominent on the market today and, soon, fire debris analysts will start seeing them in liquid samples or in fire debris samples. Biodiesel fuel is one of the most common alternative fuels and is now readily available in many parts of the United States and around the world. This article introduces biodiesel to fire debris analysts. Biodiesel fuel is manufactured from vegetable oils and/or animal oils/fats. It is composed of fatty acid methyl esters (FAMEs) and is sold pure or as a blend with diesel fuel. When present in fire debris samples, it is recommended to extract the debris using passive headspace concentration on activated charcoal, possibly followed by a solvent extraction. The gas chromatographic analysis of the extract is first carried out with the same program as for regular ignitable liquid residues, and second with a program adapted to the analysis of FAMEs.     

Intentional mixed buccal cell reference sample in a paternity case

We report a case where an alleged father (AF) attempted to substitute someone else's saliva sample for his reference sample in a paternity analysis. Buccal cells were collected from the AF and the child, and DNA analysis was performed using an autosomal STR loci (Identifiler). The profile from the AF showed extra peaks in some loci, as well as a much higher "X" allele peak relative to the "Y" allele peak at the amelogenin locus. After conducting reanalysis by another technician with another set of positive and negative controls, it was concluded that the only source of the mixed profile was by intentional introduction by the AF, at the time of sampling, of some foreign human biological material, most likely saliva from a woman. Owing to the inconclusive results, when the AF was called back to the lab and the peculiar results were explained to him, he admitted that he had introduced into his mouth saliva from another person in an attempt to be excluded as the father of the child. Although tampering with DNA reference samples is not common, some individuals may attempt to contaminate or otherwise adulterate specimens before DNA tests. Personnel responsible for sampling should be aware of this possibility and should try to establish procedures to avoid the problem.     

Paths to destruction: the lives and crimes of two serial killers

Although research into the phenomenon of serial murder has revealed that serial killers frequently do not fit the initially described paradigm in terms of their physical and psychological profiles, backgrounds, and motives to kill, the media continues to sensationalize the figures of such killers and the investigators who attempt to analyze them on the basis of aspects of their crimes. Although the so-called "typical" profile of the serial murderer has proven accurate in some instances, in many other cases the demographics and behaviors of these killers have deviated widely from the generalized assumptions. This report details two unusual cases in which five and eight murders were committed in upstate New York. The lives and crimes of these offenders illustrate the wide spectrum of variations in the backgrounds, demographics, motivations, and actions witnessed among serial murderers, and highlight the limitations and dangers of profiling based on generalities.     

Visual detection of trace nitroaromatic explosive residue using photoluminescent metallole-containing polymers

The detection of trace explosives is important for forensic, military, and homeland security applications. Detection of widely used nitroaromatic explosives (trinitrotoluene [TNT], 2,4-dinitrotoluene [DNT], picric acid [PA]) was carried out using photoluminescent metallole-containing polymers. The method of detection is through the quenching of fluorescence of thin films of the polymer, prepared by spray coating organic solutions of the polymer, by the explosive analyte. Visual quenching of luminescence (lambda(em) approximately 400-510 nm) in the presence of the explosive is seen immediately upon illumination with near-UV light (lambda(ex)=360 nm). Detection limits were observed to be as low as 5 ng for TNT, 20 ng for DNT, and 5 ng for PA. In addition, experiments with normal production line explosives and their components show that this technology is also able to detect composition B, Pyrodex, and nitromethane. This method offers a convenient and sensitive method of detection of trace nitroaromatic explosive residue.     

Diagnostic dilemma of sudden deaths due to acute hemorrhagic pancreatitis

Sudden death due to acute pancreatitis has been rarely determined. A review of 3305 autopsies performed between 1991 and 2001 at the Council of Forensic Medicine found 12 cases (0.36%) with sudden death due to acute hemorrhagic pancreatitis without symptoms. A history of chronic alcohol ingestion was obtained from family in four cases (33%), and no stones were found in the bile ducts or in the gall bladders. During the autopsies, hemorrhage and edema were localized on the head of the pancreas in three cases and the whole pancreas in nine cases. The most common extrapancreatic pathology was found in the lung including pulmonary edema, alveolar hemorrhage, pleural effusion, and pulmonary congestion. There was no correlation between pulmonary and pancreatic damage. It is suggested that the forensic pathologists who are dealing with sudden unexpected death must not ignore the examination of pancreatic and extrapancreatic regions to avoid missing acute pancreatitis.     

Heat Induced Changes to Dental Resin Composites: A Reference in Forensic Investigations?*

The objective was to investigate color change and surface damage in dental resin composites exposed to high temperatures over different time intervals for comparative purposes. Samples were prepared using two resins - Z100(R) (R1) and Charisma (R2), heated at the following temperatures: 200 degrees C, 400 degrees C, 600 degrees C, 1000 degrees C, for 15, 30 and 45 min (n = 104 for each resin sample). Color (DeltaE) and brightness (DeltaL) changes were analyzed by spectrophotometry using the CIE Lab system and surface changes by Scanning Electron Microscopy (SEM). R1 showed more intense color changes after heat exposure than R2. DeltaL values were found to be the best parameter for evaluation of light and color change. A biphasic pattern after thermal exposure was detected, from dark brown to light white. SEM showed more intense alterations in R2 than in R1. These results indicate that the parameters observed in both resins are useful as a guide in forensic analyses.     

Measuring the intercondylar shelf angle using radiographs: intra- and inter-observer error tests of reliability

This study presents a test of intra- and inter-observer measurement error rates of the intercondylar shelf angle of the distal femur, as measured on lateral radiographs. This measurement is the central element of a method to determine racial affiliation from the distal femur. Four observers independently radiographed a set of 33 complete and partial femora from collections housed at the Joint POW/MIA Accounting Command, Central Identification Laboratory. Each observer then measured the intercondylar shelf angles in each radiograph, following the original method's guidelines. A supplementary inter-observer error test was conducted by four additional observers on one set of radiographs. Statistically significant differences were found for both intra- and inter-observer error based on the results of Student's t-tests, paired samples t-tests, and ANOVA analyses. The results of this study indicate that further experimentation should be undertaken in order to develop refined measurement techniques that may help improve standardization and reduce the observer error rates.