Determination of Trace Elemental Concentrations in Document Papers for Forensic Comparison Using Inductively Coupled Plasma–Mass Spectrometry

Abstract:  With improvements in manufacturing procedures, comparing physical characteristics of paper samples may not offer sufficient discrimination among different vendors. In this work, the potential to differentiate paper samples based on trace element concentrations was investigated. Paper samples from two different vendors were microwave-digested and trace element concentrations (Mg, Al, Mn, Fe, Sr, Y, Ba, Ce, and Nd) were determined using inductively coupled plasma–mass spectrometry. Differences in concentration were assessed statistically using two-way ANOVA and Tukey's honestly significant differences test. Elemental concentrations were shown to be consistent across a single sheet as well as within a single ream of paper for each vendor. Reams from vendor A were differentiated based on Al and Ba concentration while reams from vendor B were differentiated based on Mg, Mn, and Sr concentrations. Paper was differentiated according to vendor based on significant differences in Ba, Sr, Ce, and Nd concentrations.     

Proteolytic‐Based Method for the Identification of Human Growth Hormone*

Abstract: Human growth hormone (HGH) is a relatively small protein consisting of 191 amino acids and has an average mass of 22,125 amu. The forensic analysis of proteins such as HGH must meet the analytical sufficiency requirements for the laboratory and consists of a binary approach. A suspected sample is analyzed as the whole protein for retention time and mass determination using high performance liquid chromatography equipped with a photodiode array and liquid chromatography mass spectrometry. Further fragmentation of the protein using a proteolytic enzyme adds another dimension to the specificity of the analysis. Porcine trypsin digests proteins in a very predictable manner and yields peptide fragments of the original protein that can be used as a means for fingerprinting the larger biomolecule. In silico, or theoretical, digestion of HGH by trypsin yields 21 peptides ranging in size from 1 to 23 amino acids in length. The larger fragments containing higher numbers of amino acids give more specificity to identifying a protein based on a fragment produced by the digestion of trypsin. Herein, the analysis of HGH using a proteolytic approach is presented that meets the Scientific Working Group for the Analysis of Seized Drugs (SWGDRUG) recommendations for the identification of unknown substances.     

Trace Elemental Analysis of Titanium Dioxide Pigments and Automotive White Paint Fragments for Forensic Examination Using High‐Energy Synchrotron Radiation X‐Ray Fluorescence Spectrometry*

Abstract: High‐energy synchrotron radiation x‐ray fluorescence spectrometry (SR‐XRF) utilizing 116 keV x‐rays was used to characterize titanium dioxide pigments (rutile) and automotive white paint fragments for forensic examination. The technique allowed analysis of K lines of 9 trace elements in 18 titanium dioxide pigments (rutile), and 10 trace elements in finish coat layers of seven automotive white paint fragments. High‐field strength elements (HFSE) were found to strongly reflect the origin of the titanium dioxide (TiO₂) pigments, and could be used as effective parameters for discrimination and classification of the pigments and paint fragments. A pairwise comparison of the finish coat layers of seven automotive white paint fragments was performed. The trace elements in the finish coat layers detected by the high‐energy SR‐XRF were especially effective for identification. By introducing the trace element information of primer and electrocoat layers, all the automotive white paint fragments could be discriminated by this technique.     

氯硝安定在生物体内的代谢

目的推测氯硝安定在生物体内的主要代谢方式,检测其代谢产物。方法取5只Wistar大鼠,连续3d给每只大鼠灌胃氯硝安定（剂量分别为1、2、2mg）,收集灌胃后24h内尿液;给3只大鼠各灌胃2mg氯硝安定,2h后处死,取血液和肝组织等检材;收集3名口服5mg氯硝安定的志愿者24h内尿液。分别对不同检材进行处理后,气相色谱/质谱联用（GC/MS）检测。结果在大鼠阳性尿液和志愿者阳性尿液中,均检出7-乙酰氨基氯硝安定和7-氨基氯硝基安定;在大鼠血液中,主要检出氯硝安定和7-氨基氯硝基安定;在大鼠肝组织中,主要检出7-乙酰氨基氯硝安定,还有少量7-氨基氯硝安定和氯硝安定。结论氯硝安定进入生物体后,其7位硝基被还原为氨基,氨基接着被乙酰化,形成7-氨基氯硝基安定和7-乙酰氨基氯硝安定代谢物,其中7-乙酰氨基氯硝安定为主要代谢物。     

Forensic analysis of explosives using isotope ratio mass spectrometry (IRMS) — Preliminary study on TATP and PETN

The application of isotopic techniques to investigations requiring the provision of evidence to a Court is limited. The objective of this research was to investigate the application of light stable isotopes and isotope ratio mass spectrometry (IRMS) to solve complex forensic cases by providing a level of discrimination not achievable utilising traditional forensic techniques.Due to the current threat of organic peroxide explosives, such as triacetone triperoxide (TATP), research was undertaken to determine the potential of IRMS to differentiate samples of TATP that had been manufactured utilising different starting materials and/or manufacturing processes. In addition, due to the prevalence of pentaerythritoltetranitrate (PETN) in detonators, detonating cord, and boosters, the potential of the IRMS technique to differentiate PETN samples from different sources was also investigated.Carbon isotope values were measured in fourteen TATP samples, with three definite groups appearing in the initial sample set based on the carbon data alone. Four additional TATP samples (in a second set of samples) were distinguishable utilising the carbon and hydrogen isotopic compositions individually, and also in combination with the oxygen isotope values. The 3D plot of the carbon, oxygen and hydrogen data demonstrated the clear discrimination of the four samples of TATP. The carbon and nitrogen isotope values measured from fifteen PETN samples, allowed samples from different sources to be readily discriminated.This paper demonstrates the successful application of IRMS to the analysis of explosives of forensic interest to assist in discriminating samples from different sources. This research represents a preliminary evaluation of the IRMS technique for the measurement of stable isotope values in TATP and PETN samples, and supports the dedication of resources for a full evaluation of this application in order to achieve Court reportable IRMS results.     

Forensic analysis of explosives using isotope ratio mass spectrometry (IRMS) — Discrimination of ammonium nitrate sources

An evaluation was undertaken to determine if isotope ratio mass spectrometry (IRMS) could assist in the investigation of complex forensic cases by providing a level of discrimination not achievable utilising traditional forensic techniques. The focus of the research was on ammonium nitrate (AN), a common oxidiser used in improvised explosive mixtures.The potential value of IRMS to attribute Australian AN samples to the manufacturing source was demonstrated through the development of a preliminary AN classification scheme based on nitrogen isotopes. Although the discrimination utilising nitrogen isotopes alone was limited and only relevant to samples from the three Australian manufacturers during the evaluated time period, the classification scheme has potential as an investigative aid.Combining oxygen and hydrogen stable isotope values permitted the differentiation of AN prills from three different Australian manufacturers. Samples from five different overseas sources could be differentiated utilising a combination of the nitrogen, oxygen and hydrogen isotope values. Limited differentiation between Australian and overseas prills was achieved for the samples analysed.The comparison of nitrogen isotope values from intact AN prill samples with those from post-blast AN prill residues highlighted that the nitrogen isotopic composition of the prills was not maintained post-blast; hence, limiting the technique to analysis of un-reacted explosive material.     

Age determination of ballpoint pen ink by thermal desorption and gas chromatography-mass spectrometry

Two main approaches can be used for determining the age of an ink: indirect dating and direct dating. Indirect dating is based on the chemical analysis of an ink followed by comparison with known samples in a reference collection. The collection should contain information about the inks including the market introduction dates. This approach may allow for an anachronism to be detected. The second concept is based on measuring ink components that change with age. The analysis of solvents in ballpoint inks may be a useful parameter for determining the age of ink on paper. In a previous study, the authors demonstrated that thermal desorption of ink directly from paper, followed by chemical analysis using gas chromatography-mass spectrometry (GC-MS), is a promising procedure for characterizing ink-binder resins and solvents. Preliminary tests showed that monitoring the evaporation of ink solvent from ink on paper is not a suitable method for ink dating. Thermal analysis of ink on paper in two steps revealed that fresh ink releases a relative amount of solvent at a certain low temperature in a defined period of time, which decreases as the ink ages. As a consequence, this relative amount of solvent released at a certain low temperature, and its decrease with time, can be used to estimate ink age. This age-dependent parameter was studied in 85 different inks ranging in age from 1 week to 1.5 years. It was found that some inks showed a significant decrease of this parameter up to an age of several months, and that the aging process can be monitored within this period. For other inks, however, the age-dependent parameter decreases relatively fast, e.g., within a few days, to a constant level, which can be too fast for casework. Based on these results, a general procedure for assessing the age of ballpoint pen inks on paper was developed.     

Identification of acepromazine in hair: an illustration of the difficulties encountered in investigating drug-facilitated crimes

After a drug-facilitated sexual assault (DFSA), a woman was found in a drowsy state at home. She remembered having drunk an unknown beverage by the accused. Blood samples (collected 8 hours after the DFSA), two glasses, and a teaspoon seized by the police were analyzed. Acepromazine, a phenothiazine tranquilizer used in human and veterinary medicine, was detected in the residue of one of the glasses. In spite of acepromazine absence in the victim's blood, the possible use of acepromazine in the DFSA was reported to the police. Two weeks later, a suspect admitted having orally administered acepromazine to the victim. Using a liquid chromatography-tandem mass spectrometry method, this compound was subsequently detected (31 pg/mg) in a sample of the victim's hair collected a month and a half after the DFSA. A potential short elimination half-life in humans and/or the well-known in vitro degradation of acepromazine could explain the negative blood result. DFSA toxicological investigations are challenging and can be complicated when a rather unusual substance is concerned. In particular, special care should be taken when interpreting the results, taking into account elimination and/or instability data, when available.     

Bromadiolone poisoning: LC-MS method and pharmacokinetic data

Abstract:  Poisoning with superwarfarins, like bromadiolone, is a growing public health problem, and the mortality is high. Pharmacokinetic data on bromadiolone in humans are however scarce, and there are no reports following repeated exposures to bromadiolone. We have developed a method for quantification of bromadiolone in whole blood, using liquid chromatography–mass spectrometry (LC-MS). The analytical method is reported. Limit of detection was 0.005 mg/L and limit of quantification was 0.01 mg/L. The concentrations of bromadiolone in whole blood and plasma in serial samples from a 62-year-old woman were measured. The half-life of bromadiolone in blood was estimated to be about 6 days in the initial phase of elimination and about 10–13 days in the terminal phase. The mean plasma/blood ratio of bromadiolone was 1.7 ± 0.6. Stability testing of bromadiolone in whole blood samples after two cycles of freeze and thaw revealed that bromadiolone concentrations decreased.