Effect of Aging and Surface Interactions on the Diffusion of Endogenous Compounds in Latent Fingerprints Studied by Mass Spectrometry Imaging,

The ability to determine the age of fingerprints would be immeasurably beneficial in criminal investigations. We explore the possibility of determining the age of fingerprints by analyzing various compounds as they diffuse from the ridges to the valleys of fingerprints using matrix‐assisted laser desorption/ionization mass spectrometry imaging. The diffusion of two classes of endogenous fingerprint compounds, fatty acids and triacylglycerols (TGs), was studied in fresh and aged fingerprints on four surfaces. We expected higher molecular weight TGs would diffuse slower than fatty acids and allow us to determine the age of older fingerprints. However, we found interactions between endogenous compounds and the surface have a much stronger impact on diffusion than molecular weight. For example, diffusion of TGs is faster on hydrophilic plain glass or partially hydrophilic stainless steel surfaces, than on a hydrophobic Rain‐x treated surface. This result further complicates utilizing a diffusion model to age fingerprints.     

电热板消解电感耦合等离子体质谱法测定人发中33种无机元素的含量

目的建立头发中33种无机元素的电热板消解电感耦合等离子体质谱（inductivelycoupledplas—ma—IllasssDectrometry,ICP—MS）测定方法。方法以锂（6Li）、锗（^72Ge）、钇（^89Y）、铟（^115In）、铽（^159yb）作内标,硝酸和过氧化氢作为消解酸体系．采用电热板消解对头发进行前处理,ICP—MS法分析人发中33种无机元素的含量。结果电热板消解ICP—MS法的检出限为0．0001μg／g（Th）-10．9μg／g（Ca）,定量限为O．0005μg／g（Th）～25μg／g（Ca）,加标回收率为86％～113％,日内及日间精密度≤9.2％,与微波消解法检测结果相比,差异无统计学意义。结论电热板消解ICP—MS法高效、准确度高,适用于对头发中33种无机元素的分析。     

3,4-亚甲二氧基甲卡西酮的鉴定

目的 建立基于傅里叶变换红外光谱(FTIR)、气相色谱-质谱(GC-MS)结合高分辨质谱技术联合鉴定未知样品的方法.方法 未知样品采用红外专用取样器直接检测;甲醇溶解后采用GC-MS和组合型高分辨质谱检测,以MDMA为内标物.结果 未知样品获得的红外光谱特征吸收峰为1679(C=O键),1603,1502,1453,1423,1259,1121,1090,1035,930,887,838,768,742和717cm-1,质谱特征碎片峰(m/z)为58.1,91.0,120.9,149.0和207.0,测得的精确质量数[M+H]+为208.0966.经信息分析未知样品鉴定为3,4-亚甲二氧基甲卡西酮,该物质属于新型化学合成卡西酮类精神活性物质,已经列入部分欧盟国家的管制药物目录.结论 本方法可用于3,4-亚甲二氧基甲卡西酮的鉴定.     

Analysis and Discrimination of Single‐Layer White Architectural Paint Samples,

Comparative analyses of 50 single‐layer white architectural paints were conducted to determine the discrimination power using standard techniques and to provide a basis for assessing significance when paints with limited features are not discriminated. Utilizing Fourier transform infrared spectroscopy (FTIR), 68 undifferentiated pairs resulted, yielding a discrimination of 94.45%. Adding stereomicroscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and backscatter electron (BSE) imaging, and pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), the overall discrimination was 99.35%. The study included blind verification replicates, which resulted in the only pairs without indications of physical or chemical differences. The remaining groups of undifferentiated samples contained subtle differences by at least one technique, but were considered undifferentiated for the discrimination power evaluations. This study demonstrates a high degree of discrimination of single‐layer white architectural paints using methods of analysis often encountered in forensic science laboratories.     

The Survival of Gunshot Residues in Cremated Bone: An Inductively Coupled Plasma Optical Emission Spectrometry Study

Gunshot residue (GSR) has been sought and demonstrated on many types of material and with many techniques. Inductively coupled plasma optical emission spectrometry (ICP‐OES) could be a useful method on difficult substrates, but a systematic study on burnt material has never been performed. Hence, this study aims at evaluating the usefulness and reliability of this method on burnt samples. Sixteen adult bovine ribs (eight with soft tissues, eight totally skeletonized) were shot using two kinds of projectile (both 9 mm full metal‐jacketed or unjacketed). Then, every sample was led to complete calcination in an electric oven. The area of the gunshot entrance wound was swabbed and analyzed by ICP‐OES; the results were also correlated with a previously published parallel study by scanning electron microscopy (SEM) equipped with an SEM–energy dispersive X‐ray analyzer. ICP‐OES proved to be very sensitive and reliable even on degraded material and can be an appropriate nondestructive method for detecting residues on difficult and delicate substrates such as burnt bone.     

Raman Spectroscopy as a Simple,Rapid, Nondestructive Screening Test for Methamphetamine in Clandestine Laboratory Liquids

Raman spectroscopy has found increased use in the forensic controlled substances laboratory in recent years due to its rapid and nondestructive analysis capabilities. Here, Raman spectroscopy as a screening test for methamphetamine in clandestine laboratory liquid samples is discussed as a way to improve the efficiency of a laboratory by identifying the most probative samples for further workup among multiple samples submitted for analysis. Solutions of methamphetamine in ethanol, diethyl ether, and Coleman fuel were prepared in concentrations ranging from 0.5% to 10% w/v, and Raman spectra of each were collected. A concentration‐dependant Raman peak was observed at 1003 per cm in each solution in 4% w/v and greater solutions. Case samples were analyzed and also found to reliably contain this diagnostic peak when methamphetamine was present. The use of this diagnostic indicator can save the forensic controlled substances laboratory time and materials when analyzing clandestine laboratory liquid submissions.     

Optimizing Accu Time‐of‐Flight/Direct Analysis in Real Time for Explosive Residue Analysis

The use of a direct analysis in real time (DART) mass spectrometer (MS) instrument was optimized for 22 compounds of organic explosive residues to provide a guide for DART‐MS users in rapid screening of explosive compounds. Samples were introduced as neat solutions and sequential dilutions to determine optimal instrument conditions and lowest concentration detectable. Most compounds were optimized to 250°C in the negative ion mode, and several compounds benefited from the addition of a chloride dopant from methylene chloride (amino‐dinitrotoluenes, RDX, EGDN, and PETN). Few compounds were more sensitive in the positive ion mode (TEGDN, DEGDN, HNS, and DMNB). Mixtures of compounds were detected using clean room wipes, directly from their surfaces and from subsequent extractions. Compounds from the mixtures were also successfully detected in soil and from swipes of spiked surfaces. The instrument showed merit in detection of pg/μL solutions for most of the compounds and among the substrates tested.     

Chemical Contamination of Soft Drinks in Sealed Plastic Bottles by Environmental Stress Cracking

Abstract:  A contamination of soft drinks in sealed bottles by organic solvents is reported: closed bottles full of soft drinks were accidentally placed on a cardboard soaked with thinner and the organic fluid subsequently fissured the bottom of the bottles and penetrated into the soft drinks without any apparent leakage of the soft drinks. Experiments were carried out to simulate the process: the penetration of different organic solvents into soft drinks through the bottom of closed bottles was tested. The penetration occurred only when the closed bottles contained carbonated soft drinks (CSD), indicating that inner pressure is a necessary condition for the fissuring of the bottles. This paper discusses environmental stress cracking of polyethylene terephthalate (PET) bottles by organic solvents and migration of chemicals to CSD. Experiments were conducted to determine the conditions in which PET can be permeable to poisoning organic products.     

Determination of Trace Elemental Concentrations in Document Papers for Forensic Comparison Using Inductively Coupled Plasma–Mass Spectrometry

Abstract:  With improvements in manufacturing procedures, comparing physical characteristics of paper samples may not offer sufficient discrimination among different vendors. In this work, the potential to differentiate paper samples based on trace element concentrations was investigated. Paper samples from two different vendors were microwave-digested and trace element concentrations (Mg, Al, Mn, Fe, Sr, Y, Ba, Ce, and Nd) were determined using inductively coupled plasma–mass spectrometry. Differences in concentration were assessed statistically using two-way ANOVA and Tukey's honestly significant differences test. Elemental concentrations were shown to be consistent across a single sheet as well as within a single ream of paper for each vendor. Reams from vendor A were differentiated based on Al and Ba concentration while reams from vendor B were differentiated based on Mg, Mn, and Sr concentrations. Paper was differentiated according to vendor based on significant differences in Ba, Sr, Ce, and Nd concentrations.     

Proteolytic‐Based Method for the Identification of Human Growth Hormone*

Abstract: Human growth hormone (HGH) is a relatively small protein consisting of 191 amino acids and has an average mass of 22,125 amu. The forensic analysis of proteins such as HGH must meet the analytical sufficiency requirements for the laboratory and consists of a binary approach. A suspected sample is analyzed as the whole protein for retention time and mass determination using high performance liquid chromatography equipped with a photodiode array and liquid chromatography mass spectrometry. Further fragmentation of the protein using a proteolytic enzyme adds another dimension to the specificity of the analysis. Porcine trypsin digests proteins in a very predictable manner and yields peptide fragments of the original protein that can be used as a means for fingerprinting the larger biomolecule. In silico, or theoretical, digestion of HGH by trypsin yields 21 peptides ranging in size from 1 to 23 amino acids in length. The larger fragments containing higher numbers of amino acids give more specificity to identifying a protein based on a fragment produced by the digestion of trypsin. Herein, the analysis of HGH using a proteolytic approach is presented that meets the Scientific Working Group for the Analysis of Seized Drugs (SWGDRUG) recommendations for the identification of unknown substances.