The examination of typewriter correctable carbon film ribbons

The study of typewritten strokes on paper with an optical stereomicroscope or an optical microscope at high magnifications is deceptive and does not permit differentiation between impressions made with different ribbons, or identification of a certain ribbon brand. With the Scanning Electron Microscope, the identification/differentiation is possible as the structure of the strokes on the paper differs from one ribbon brand to another and is characteristic.     

人体血液体外电击致血细胞穿孔的扫描电镜观察

目的探讨血细胞体外电击时细胞膜的结构变化。方法对成人血液分别分组通过220V交流电电击5,10,20,30s和1min后,用扫描电镜观察血细胞膜的变化。结果电击后,即可以观察到红细胞与白细胞的细胞膜穿孔,其中红细胞穿孔可为一个或多个,形状多为圆形或卵圆形,白细胞穿孔则为多个,呈筛网状;穿孔细胞数随电击时间延长而增多;电击5s时为6%左右,以后逐渐增加,至电击1min时,穿孔细胞数可达40%左右。结论电流作用可以使血细胞膜发生穿孔,穿孔细胞数随通电时间延长而增多。     

Lead-free primer residues: a qualitative characterization of Winchester WinClean, Remington/UMC LeadLess, Federal BallistiClean, and Speer Lawman CleanFire handgun ammunition

The elemental composition and postfiring residues of several "lead-free" or "nontoxic" centerfire handgun ammunition types currently available to the general public were examined. Offerings from Winchester, Remington/UMC, Federal and Speer were obtained from retail sources in both .45 ACP and 9 mm when possible. A total of 112 postfiring residue samples (SEM pins) were collected at varying distances from the muzzle, at two distances from target and from the shooter's hands. An additional 20 samples were collected by direct ignition of primers. Qualitative determinations were carried out using scanning electron microscopy (SEM)/electron dispersive spectrometry (EDS) analysis. All types tested contained aluminum (Al), silicon (Si), copper (Cu), and zinc (Zn). Most contain traces of sulfur and calcium. Winchester WinClean and Remington LeadLess contained potassium as the principle ingredient. Federal BallistClean contained barium, while Speer Lawman CleanFire contained strontium. In the main, these compared favorably with manufacturers' MSDS publications and patents granted. The characterizations undertaken here will be of use to the forensic electron microscopist as these formulations gain popularity.     

Morphological and spectroscopic measurements of plastic bags for the purpose of discrimination

The discrimination of noncolored transparent polyethylene bags was studied by several nondestructive and semidestructive analytical methods. X-ray diffraction, infrared spectroscopy, and optical microscopy (differential interference contrast microscopy and phase contrast microscopy) were applied to polyethylene films. X-ray diffraction was used to distinguish variations in the crystalline phase, infrared spectroscopy was used to distinguish variations in the molecular components, and optical microscopy was used to distinguish the different surface morphologies. The results show that X-ray diffraction classifies the crystalline phase of the film depending on whether it is made from low-density polyethylene, linear low-density polyethylene, or high-density polyethylene; that infrared spectroscopy is useful to distinguish the molecular components and it is the most discriminating technique; and that optical microscopy discriminate films easily by their morphological differences.     

Discrimination of transparent polyethylene films based on identification of inorganic antiblocking agents

Several nondestructive and semidestructive analyses were used to discriminate colorless transparent polyethylene bags. Transparent plastic bags made from low-density and linear low-density polyethylene usually contain antiblocking agents to prevent sticking of the film, which makes it difficult to open the mouths of plastic bags. Inorganic antiblocking agents are uniformly dispersed in polyethylene films, so they are easily observed using optical microscopy. The particle size distributions of the antiblocking agents were compared by statistical tests. Particle composition was examined by elemental analysis using energy-dispersive X-ray spectrometry with a scanning electron microscope and by molecular vibration analysis using a sensitive microscopic Raman spectrometer. The compositions could be determined nondestructively on the basis of the results. These data reinforce the morphological discrimination. Morphological discrimination of the dispersed antiblocking agent powders, statistical comparison of particle size distributions, and compositional analysis of the antiblocking agents strengthen the ability to discriminate polyethylene films.     

微波消解-扫描电镜联用法在溺死诊断中的应用

目的探讨微波消解-扫描电镜联用法在溺死诊断中的应用价值。方法收集已知死因的尸体标本105例,其中水中尸体85例(生前溺死70例,死后抛尸入水15例),陆地自然死亡尸体20例。水中死亡案例同时收集落水处水样。分别用微波消解-扫描电镜联用法(方法 A)和硝酸破机-光镜联用法(方法 B)对上述尸体的离体肺、肝、肾、骨髓组织及水样进行硅藻定性、定量检测。结果①溺死尸体的肺、肝、肾、骨髓中及落水处水样硅藻检出率:A法分别为100%、94.3%、92.9%、82.9%、100%,硅藻检验阳性率为100%;B法分别为90%、62.9%、51.4%、28.6%、92.9%,硅藻检验阳性率为65.7%。②两种方法检出的硅藻种类与落水处水样中硅藻的种类均一致。③两种方法在死后入水尸体离体的肺中也检出少量硅藻(<3个/2g肺组织),但在死后入水尸体的其它脏器及陆地自然死亡尸体脏器中均未检出硅藻。结论微波消解-扫描电镜联用法较硝酸破机-光镜联用法对尸体离体组织脏器中的硅藻检出率高,方法灵敏,定性准确。     

Infrared Spectra of U.S. Automobile Original Finishes (1998–2000). IX. Identification of Bismuth Oxychloride and Silver/White Mica Pearlescent Pigments Using Extended Range FT‐IR Spectroscopy,XRF Spectrometry,and SEM/EDS Analysis

Bismuth oxychloride (BiOCl) was the first viable synthetic pearl pigment developed 50 years ago. It was only used for a limited time period in automotive paint (model years 1998–2000), serving to produce luster for a single Chrysler black metallic color. Identification of this pigment in an unknown automotive paint can thus facilitate determination of the vehicle of origin. Bismuth oxychloride imparts effects similar to those produced by silver/white mica pearlescent pigments, and such a pigment was used together with bismuth oxychloride in at least one original equipment manufacturer (OEM) basecoat. Silver/white micas are now used primarily in white pearl tricoat systems. This article describes the identification of bismuth oxychloride and silver/white mica pearlescent pigments in automotive finishes using FT‐IR spectroscopy, X‐ray fluorescence (XRF) spectrometry, and SEM/EDS analysis. Data for some cadmium pigments, which were used in automotive paint several decades ago, are also presented as they produce infrared absorptions similar to that of bismuth oxychloride.     

铁铬合金菜刀遗留金属颗粒的成分评价方法

目的检测铁铬合金菜刀遗留的金属颗粒成分,并建立可行的评价指标及方法。方法使用滤纸擦蹭菜刀制作金属遗留微小颗粒样本,应用扫描电镜-X射线能谱仪(scanning electron microscopy and energy dispersive X-ray spectrometer,SEM-EDX)的GSR颗粒分析功能检测遗留金属颗粒成分,计算遗留金属颗粒中铁、铬相对含量比。结果铁铬合金菜刀遗留金属颗粒内所含铁、铬相对含量比,在大部分菜刀间差异有统计学意义(P0.05)。结论使用GSR颗粒分析功能量化检测铁铬合金菜刀遗留金属颗粒内铁、铬相对含量比,为此类致伤工具的认定建立可行的评价方法。     

Elemental Characterization and Discrimination of Nontoxic Ammunition Using Scanning Electron Microscopy with Energy Dispersive X‐Ray Analysis and Principal Components Analysis

Concerns over the toxic by‐products produced by traditional ammunition have led to an increase in popularity of nontoxic ammunition. In this work, the chemical composition of six brands of nontoxic ammunition was investigated and compared to that of a road flare, which served as an environmental source with similar composition. Five rounds of each brand were fired while a further five were disassembled and the primer alone was fired. Particles collected from all samples, including the road flare, were analyzed by scanning electron microscopy with energy dispersive X‐ray analysis. Common elements among the different ammunition brands included aluminum, potassium, silicon, calcium, and strontium. Spectra were then subjected to principal components analysis in which association of the primer to the intact ammunition sample was generally possible, with distinction among brands and from the road flare sample. Further, PCA loadings plots indicated the elements responsible for the association and discrimination observed.     

Heat Induced Changes to Dental Resin Composites: A Reference in Forensic Investigations?*

The objective was to investigate color change and surface damage in dental resin composites exposed to high temperatures over different time intervals for comparative purposes. Samples were prepared using two resins - Z100(R) (R1) and Charisma (R2), heated at the following temperatures: 200 degrees C, 400 degrees C, 600 degrees C, 1000 degrees C, for 15, 30 and 45 min (n = 104 for each resin sample). Color (DeltaE) and brightness (DeltaL) changes were analyzed by spectrophotometry using the CIE Lab system and surface changes by Scanning Electron Microscopy (SEM). R1 showed more intense color changes after heat exposure than R2. DeltaL values were found to be the best parameter for evaluation of light and color change. A biphasic pattern after thermal exposure was detected, from dark brown to light white. SEM showed more intense alterations in R2 than in R1. These results indicate that the parameters observed in both resins are useful as a guide in forensic analyses.